苯乙烯RAFT细乳液聚合

活性自由基聚合研究在上世纪90年代取得突破，受到研究者的广泛关注．现今，已形成NMP(Nitroxide-medjated polymerization)、ATRP(Atom transfer radical polymerization)、RAFT(Reversible addition／fragmentation transfer)聚合等3种高效活性自由基聚合体系，其各自的聚合机理已基本探明。     

Study of Kinetics of Dispersion Polymerization of Styrene in Organic Media

The kinetics of dispersion polymerization of styrene in alcohol/methyl or butyl cellosolve was investigated with dried-weigh methods. The reaction parameters, such as concentration of initiator, polymerization temperature, and solvent, play an important role in determine polymerization rate. It was found that polymerization rate increases with the reaction temperature. The apparent activation energy is of 42.2kJ/mole and 52.6kJ/mole for the initial polymerization stage and the stationary polymerization interval. The polymerization rate increases with the concentration of the initiator with approximately 0.67 order dependence at conversion about 5%. It was described that the relation of conversion with the Hansen Parameters of media in detail by analysis of solvent dispersion, polarity and hydrogen bonding contributions. More significant was the result that polymerization rate versus conversion curve consisted of 3 intervals (2 non-stationary and 1 stationary one). The plateau of polymerization rate was observed in the curve of polymerization rate vs. monomer conversion.     

可控聚合技术在颜料分散剂开发中的应用

简述了可控聚合技术的发展和分散剂作用机理,分别介绍了氮氧稳定自由基聚合、原子转移自由基聚合和可逆加成―断裂链转移自由基聚合的可控机理和适用环境,重点描述了可控聚合技术在颜料分散剂开发中的研究现状和市场前景。     

丙烯酸钠反相乳液聚合

以阴离子乳化剂制备丙烯酸钠反相乳液，用γ射线引发其聚合，用扫描电镜观测了聚合前后粒径的变化；并在聚合过程中改变剂量率观测了聚合速率的变化．这两个实验结果都显示聚合以液滴成核为主，即聚合机理类似于悬浮聚合．与以司盘８０为乳化剂的丙烯酸钠反相乳液聚合相比，体系与司盘体系的聚合动力学基本相似；但是体系中的分散液滴比司盘体系要大，结果使得在动力学上体系更类似于悬浮聚合的动力学．从聚合机理看，反相乳液聚合实际上就是粒子分散得比较小的反相悬浮聚合．     

丙烯酰胺双水相聚合体系稳定性研究

通过浊点滴定法测定了不同温度下PAAmPEGH2O双水相体系相图,发现分相浓度随着温度的升高先增后降,55℃时分相浓度最低.双水相聚合体系微观结构显示,分散相以砾状液滴形式均匀分散在连续相中.研究了聚合过程中聚合体系粘度的变化,以及聚合温度、分散介质、单体、引发剂及乳化剂等对聚合体系最终粘度的影响,聚合体系最终粘度在一定范围内随分散介质和单体浓度增加变化不大,但是超过某一浓度后聚合体系粘度急剧增加;聚合体系中加入少量乳化剂对体系粘度影响不大,但加入大量乳化剂后体系稳定性变差,聚合体系粘度急剧增加;聚合体系最终粘度随着聚合温度升高先降后增,与相图的预测结果一致.     

Electroinitiated polymerization of butadiene sulfone

Electroinitiated polymerization of butadiene sulfone was achieved by direct electron transfer in acetonitrile—tetrabutylammonium fluoroborate system by controlled potential electrolysis technique. High conversions were obtained at reasonable temperatures and polymerization times. The polymer was found to be composed of linear segments along with some cyclic units. The effect of monomer concentration, temperature, and polymerization potential on the rate of polymerization was investigated. Temperature and polymerization potential have positive effects on the rate of polymerization. The effect of ultrasonic vibration was also investigated by conducting electrolyses at different monomer concentrations in the presence and absence of ultrasonic vibration. It was observed that the rate of polymerization increases significantly in the presence of ultrasonic vibration. The inverse relationship between the rate of polymerization and monomer concentration was observed in presence and absence of ultrasonic vibration.     

Kinetics of γ-ray polymerization of formaldehyde in the presence of carbon dioxide

A kinetic study of the γ-ray polymerization of formaldehyde in toluene solution in the presence of carbon dioxide was carried out at temperatures of + 13 to ?17°C. Two modes of the polymerization, spontaneous and γ-ray polymerization, occur in this system. The γ-ray polymerization, experimentally separated from the spontaneous polymerization, was investigated. The rate of γ-ray polymerization increased slightly with the square root of carbon dioxide concentration. The rate of polymerization was also found to be proportional to the dose rate and the square of monomer concentration. The molecular weight of polymer formed was independent of the reaction condition. The apparent activation energy was estimated to be 10.3 kcal./mole. The kinetics of the γ-ray polymerization in the presence of carbon dioxide are explained quantitatively by a cationic mechanism, and the role of carbon dioxide is as an action of retardation for neutralization of the cationic initiating species, which was produced by γ-radiation, by means of a reverse reaction with an electron. Physical and mechanical properties of the polymer obtained by γ-ray polymerization were also investigated.     

Polymerization of vinyl chloride in the presence of precipitants. I

The kinetics of bulk and precipitation polymerization of vinyl chloride has been studied over wide range of reaction temperature by using γ-ray induced initiation. The autoacceleration effect, which has been observed by many investigators in the case of chemically initiated bulk polymerization of vinyl chloride above 40°C and has been the most controversial aspect of the bulk polymerization of vinyl chloride, was found to disappear in the bulk polymerization below 0°C. In the bulk polymerization at 40°C, the autoacceleration effect was observed up to 20%, in agreement with the results of previous investigators, and a pronounced effect of the size of polymer particles on the time–conversion curve was observed. The kinetics of precipitation polymerization of vinyl chloride in the presence of some nonsolvents was successfully described by a oneparameter equation. A kinetic scheme, which clearly explains the zero-order reaction behavior of bulk polymerization at low temperature and the kinetic behavior of precipitation polymerization described by the empirical equation, is proposed. The autoacceleration effect in the bulk polymerization at 40°C was considered to be essentially the same phenomenon as the small retardation period observed in the bulk polymerization at low temperature.     

Cu~(2+)-Na_2SO_3体系引发甲基丙烯酸甲酯聚合动力学

研究了Gu~(2+)-Na_2SO_3氧化还原体系在静置的密闭空气气氛下引发甲基丙烯酸甲酯水溶液聚合。表观聚合速度(R_p)是 R_p=1.86×10~(15)e~(-24,200/RT)[MMA]~(1·0)[Cu~(2+)]~0[Na_2SO_]~(0·50)覆盖气氛对聚合有显著影响。氧抑制聚合反应,但可使Gu~(2+)离子氧化再生。表现为低的表观聚合速度和高的碰撞频率因子与表现聚合活化能。 本文讨论了引发聚合机理。     

聚乙烯醇对丙烯酰胺聚合行为的影响

<正> 聚乙烯醇(PVA)在烯类单体自由基聚合反应中作为分散剂使用已有很长历史,对于PVA在不同催化体系中与烯类单体接枝聚合的研究报道也不少,其中有人报道PVA对过硫酸盐的分解具有促进作用,并可导致甲基丙烯酸甲酯在PVA大分子上接枝;也有人报道了PVA与过硫酸铵在水溶液中的相互作用,本文研究了在低浓度过     

Polymerization of vinyl monomers in the water–1,4-dioxane system containing peroxide and water-soluble polymer

Water-solube polymer (PST) containing triethylenetetramine side chain was prepared by the amination of chloromethylated polystyrene with triethylenetetramine in 1,4-dioxane. The polymerization of vinyl monomers was carried out in the water–organic solvent system containing PST and a very small amount of peroxide. The polymerization of methyl methacrylate proceeded smoothly in the presence of both peroxide and PST. It was found that the polymerization was initiated with the radicals generated by the interaction between hydroperoxide and amino groups of PST. 1,4-Dioxane hydroperoxide showed a high activity for the polymerization of methyl methacrylate. The maximum rate of the polymerization was observed at 60°C and in an approximately neutral solution. The addition of suitable amount of Cu(II) accelerated the polymerization of methyl methacrylate. The selective polymerization of vinyl monomers was observed in this system.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.     

Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

IntroductionDendrimers represent a class of macro-molecules with perfectly and regularly branchedstructures.However,the synthesis ofdendrimers isnot trivial and requires multistep synthesis,theircommercial development has been limited only to afew structures[1— 3 ] . Hyperbranched macro-molecules,which posses less perfectly branchedstructures,have some similar properties to those ofdendrimers,but they can be prepared in a singlestep and one- pot reaction,so many macromolecularresearchershavef…     

Vinyl Polymerization. 374. Radical Polymerization of Vinyl Monomer Initiated with Sodium Polystyrenesulfonate

The polymerization of vinyl monomer initiated by an aqueous solution of sodium polystyrenesulfonate (PSS-Na) was carried out at 85°C. Methyl methacrylate (MMA) and styrene were polymerized, while acrylonitrile was not. The rate of polymerization of MMA decreased with the increase of the degree of polymerization of PSS-Na. However, the polymerization was not initiated by sodium ethyl benzenesulfonate which was a unit molecule of PSS-Na. The polymerization proved to be a radical reaction. The polymerization was considered to commence with the formation of hydrophobic areas with PSS-Na in the aqueous phase. MMA is incorporated into these areas, and there the polymerization is initiated and proceeds. The hydrophobic areas were assumed to be similar to the micelles formed by anionic detergents such as sodium alkylbenzene sulfonate. An initiation mechanism is proposed.     

A study of the polymerization of styrene initiated by K-THF-GIC system

In this paper, the polymerization of styrene initiated by potassium (K)-tetrahydrofuran (THF)-graphite intercalation compound (GIC) (K-THF-GIC) was studied. The mechanism of the polymerization was determined to be anionic polymerization according to its characteristics. The effect of the concentration of the initiator and monomer was studied. It was found that the polymerization mainly occurred on the surface and edge of the intercalated graphite. It was also shown that the polarity of solvent has little effect on the polymerization yield in this system.     

有关缩聚反应聚合度公式的讨论

聚合度计算公式是缩聚反应一项重要的学习内容,对学生来说是一个学习难点。针对这一问题,本文对缩聚反应的五个聚合度公式进行讨论,并结合实例来说明如何选用合适的聚合度公式,希望对有关的教与学有所启发。     

Radiation-induced emulsion polymerization of ethylene. I. Effect of reaction conditions on the polymerization

The effect of reaction conditions on the rate of radiation-induced emulsion polymerization of ethylene was studied by use of a 500-ml autoclave. Among various kinds of emulsifiers, a series of potassium salts of fatty acids gave high rates of the polymerization. The polymerization was inhibited by the presence of oxygen, but the rate of polymerization followed by the induction period was not influenced by the initial presence of oxygen. Stirring rate and the monomer: water ratio did not affect the rate of polymerization. The rate of polymerization was maximum at about 80°C, and number-average molecular weight was influenced by the temperature in a similar manner as the rate of polymerization. This suggests that the change of mobility of propagating radical in the polymer particle changes the rate of termination reaction. The rate of polymerization was proportional to the 1.7 power of the reaction pressure.     

Molecular weight distribution of poly-N-vinylcarbazole obtained in catalytic solid-state polymerization

The molecular weight distribution of poly-N-vinylcarbazole (PVCar) obtained in solid-state polymerization with various catalysts or γ-rays was measured by gel-permeation chromatography, in order to determine the mechanism of the solid-state polymerization. In addition, the molecular weight distribution of PVCar obtained in the solution polymerization by the cationic catalyst was also measured. The molecular weight distribution of PVCar obtained in the catalytic solid-state polymerization was broad and had three peaks, independent of the nature of catalysts, radical and cationic. A large amount of low molecular weight oligomer (probably dimer or trimer) was formed in the catalytic solid-state polymerization of VCar. The molecular weight distribution of PVCar obtained in the cationic solution polymerization showed only one sharp peak. On the other hand, the molecular weight of PVCar obtained in the radiation-induced solid-state polymerization was larger than that obtained in the catalytic solid-state polymerization, and dimer or trimer was not formed. The molecular weight distribution of PVCar obtained was composed of one sharp peak in the high molecular weight region, and a broad peak in the low molecular weight region, and was extremely different from that of PVCar obtained in the catalytic solid-state polymerization.     

超声辐照引发MMA微乳液聚合动力学研究

用自由基捕捉剂N,N-二苯基-2,4,6-三硝基苯肼基(DPPH)进行超声辐照引发甲基丙烯酸甲酯(MMA)微乳液聚合引发过程的动力学研究,结果表明,所得速率常数比超声辐照引发纯单体聚合的速率常数大一个数量级,说明超声辐照在微乳液聚合体系中的引发作用远远强于本体聚合;得到的表观活化能为正值,说明升温有利于超声辐照引发微乳液聚合.对聚合过程动力学的研究表明,引发剂用量决定聚合反应速率曲线恒速期的长短.     

γ-poly(glutamic acid) as an initiator of cationic polymerization of N-vinylcarbazole and N-vinyl-2-pyrrolidone

The cationic polymerization of vinyl monomers initiated by biosynthesized γ-poly(glutamic acid) (γ-PGA) powder surface was carried out in a heterogeneous system. It was found that the polymerization of N-vinylcarbazole (NVC) and N-vinyl-2-pyrrolidone (NVPD) is initiated by γ-PGA powder. The grafting of polymers onto γ-PGA surface was scarcely observed. The apparent activation energy of the polymerization of NVC and NVPD was estimated to be 20.2 and 24.8 kJ/mol, respectively. The polymerization was totally inhibited by the addition of triethylamine and pyridine, but not hydroquinone. The polymerization rate in nitrobenzene was larger than that in toluene. These results indicated the cationic nature of the polymerization. γ-PGA treated with KOH did not show the initiating activity of the polymerization. Therefore, carboxyl groups on γ-PGA powder surface play an important role in the initiation of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from carboxyl groups on γ-PGA powder surface and the propagation proceeds with carboxylate anion on the surface as counter ion. © 1993 John Wiley & Sons, Inc.