2-异丙基-3-乙氧甲酰基-1,2,3,4-四氢异喹啉-4-酮衍生物的合成

报道了利用3-乙氧甲酰基异喹啉-4-酮分别与胍、脒、脲及硫脲类化合物缩合 反应合成异喹啉并嘧啶衍生物，邻氨基苯甲醛、邻氨基胡椒醛分别与异喹啉-4-酮 反应合成异喹啉并喹啉化合物．6个新化合物的结构通过元素分析、红外光谱、核 磁共振氢谱和质谱予以证实．     

通过异喹啉盐与环状1,3-二酮一锅合成二氢异喹啉-3-酮-1,4-桥环结构

异喹啉盐具有两个亲电位点, 用它与双亲核试剂发生去芳构化/环化反应, 是高效构建异喹啉桥环结构的有效策略. 然而, 这一策略主要集中在1,3-桥环结构的合成. 最近利用异喹啉盐与4-羟基香豆素反应, 首次实现了二氢异喹 啉-3-酮-1,4-桥环的合成. 但是, 当用环状1,3-二酮代替4-羟基香豆素反应时, 意外地得到了异喹啉-1,3,4(2H)-三酮. 利用高分辨质谱分析发现, 这一意外转化是由于环状1,3-二酮发生O-亲核取代后, 消除2-溴-1,3-环状二酮, 得到4-溴异喹啉-3(2H)-酮. 该中间体发生两次连续水解/空气氧化后, 得到了异喹啉-1,3,4(2H)-三酮. 基于此机理的认识, 向反应体系中添加催化量的三氟甲烷磺酸后, 成功抑制了环状1,3-二酮的O-亲核取代反应, 顺利得到了二氢异喹啉-3-酮的1,4-桥环结构(33个反应实例). 反应条件温和, 提供了一种构建异喹啉1,4-桥环骨架的高效合成方法.     

2-异丙基-1,3-二氢-4(1H)异喹啉酮及其衍生物的合成

异喹啉酮类化合物具有重要药理活性,本文在合成1,2,3,4-四氢-2-苄基异喹啉酮-4衍生物的基础上,参照Hinton方法制备2-异丙基-1,3-二氢-4(1H)异喹啉酮(1),用(1)进一步与芳醛、羟胺、酰氯及苯肼反应得到了相应的衍生物(3_a-6_e)。     

1-甲基-5,6,7,8-四氢异喹啉酮-4-甲胺的合成研究

以环己酮为起始原料,经缩合、酰化及酸性水解反应制得2 乙酰基环己酮（1）;在三乙烯二胺催化下,1与氰基乙酰胺环化得四氢异喹啉酮（2）和四氢喹啉酮（3）混合物,在乙醇中回流并趁热过滤进行分离纯化得2和3; 2经催化加氢反应合成1-甲基-5,6,7,8-四氢异喹啉酮-4-甲胺,3步总收率39.8%,其结构经¹H NMR、¹³C NMR、 ¹H-¹⁵N HMBC和MS确证。     

手性1-芳基四氢异喹啉类衍生物的合成新方法

以1,2,3,4-四氢异喹啉为原料,先依次与二碳酸二叔丁酯、亚氯酸钠反应得到N-Boc-1,2,3,4-四氢-1-异喹啉酮,再和芳基格氏试剂反应得到分子内不对称还原胺化反应的底物,最后以ax-Josiphos为手性配体,[Ir(COD)Cl]₂为金属前体,在Ti(OⁱPr)₄和40%HBr溶液组成的催化体系中合成了8个手性1-芳基四氢异喹啉类化合物,其结构经¹H NMR和¹³C NMR表征。该路线提供了一种以廉价1,2,3,4-四氢异喹啉为原料高效合成手性1-芳基四氢异喹啉类衍生物的新方法,为索利那新等药物的合成提供了新路径。      

R和S-1-(3′-溴-4′-甲氧基)苄基-2-甲基-6-甲氧基-7-羟基-1,2,3,4-四氢异喹啉的合成

单醚链和双醚链的节基四氢异喹啉在生物碱中较为长见。一般合成这类四氢异喹啉,是合成在一定位置上有溴的四氢异喹啉,然后与另一含羟基的四氢异喹啉通过Ullmann反应     

5-羟基-3,4-二氢异喹啉-1-酮的合成

以异喹啉为起始原料,经成盐、磺化得异喹啉-5-磺酸(3),3与熔融的氢氧化钠和氢氧化钾反应得1,5-二羟基异喹啉(4),以5%Pd-C为催化剂还原4得5-羟基-3,4-二氢异喹啉-1-酮(1),总收率47.6%。1的结构经1H NMR和MS确证。     

异色满酮-4及其衍生物的合成IX异香豆素并杂环化合物的合成

本文通过3, 4-二氢异苯并吡喃酮-4和其β-二酮衍生物的缩合反应, 合成出3, 4-二氢异苯并吡喃并吲哚、并喹啉、并吡唑和并嘧啶类化合物, 并进一步氧化成标题化合物。所合成的新化合物均经核磁共振光谱红外光谱及元素分析证明其分子结构。     

2,3-二氢吡喃并[2,3-f]异喹啉-4-酮及其衍生物的合成

色满酮-4和苯并色满酮-4及其衍生物,已有大量报道。也发现了其中不少衍生物具有重要的药理作用。但对杂环并色满酮-4及其衍生物的合成、性质的研究则很少。2,3-二氢吡喃并[2,3-f]喹啉-4-酮的合成已有记载,但尚未见相应异喹啉-4-酮及其衍生物的报道。我们以5-羟基异喹啉为起始原料,经氰乙     

2-苄基-1,3-二氢-4-异喹啉酮及其衍生物的合成

本文合成了2-苄基-1,3-二氢-4-异喹啉酮的四种3-位亚甲基取代衍生物，四种氧酰基肟和两种6-苄基-5H-异喹啉并[4,3-b]喹啉衍生物。新化合物的结构经元素分析、红外光谱、核磁共振谱证实。     

Stereoelectronic Features of a Complex Ketene Dimerization Reaction

The amidation reaction of a tetrahydroisoquinolin-1-one-4-carboxylic acid is a key step in the multi-kilogram-scale preparation of the antimalarial drug SJ733, now in phase 2 clinical trials. In the course of investigating THIQ carboxamidations, we found that propanephosphonic acid anhydride (T3P) is an effective reagent, although the yield and byproducts vary with the nature and quantity of the base. As a control, the T3P reaction of a 3-(2-thienyl) THIQ was performed in the absence of the amine, and the products were characterized: among them are three dimeric allenes and two dimeric lactones. A nucleophile-promoted ketene dimerization process subject to subtle steric and stereoelectronic effects accounts for their formation. Two novel monomeric products, a decarboxylated isoquinolone and a purple, fused aryl ketone, were also isolated, and mechanisms for their formation from the ketene intermediate are proposed.     

顺式和反式-2-氨基-3-氰基-4-苯基-1-(4'-甲基苯基)-2-环戊烯-1-醇的合成和晶体结构

用低价钛试剂(TiCl4-Zn)与4, 4-二氰基-3-苯基-1-(4'-甲基苯基)-1-丁酮反应合成了顺式和反式-2-氨基-3-氰基-4-苯基-1-(4'-甲基苯基)-2-环戊烯-1-醇, 并用X射线衍射分析确定了这两个异构体的构型。     

Application of DEPBT on the Synthesis of the Protected Dipeptides Containing Histidine with Unprotected Imidazole Group by Solution Method

3- (Diethoxyphosphoryloxy)- 1,2,3-benzotriazln-4 (3H)-one (DE-PBT) was an organophosphorus coupling reagent developed by our group. It was an effective coupling reagent for the synthesis of protected peptides containing Tyr, Ser and Thr with unprotected hydroxy group on their side chain. The further study of the synthesis of a series of protected dipeptides containing hisfidine with unprotected imidazole group using DEPBT is reported. During the synthetic procedure, the imidazole group of histidine did not need to be protected. When the carboxyl components were N-protected aromatic amino acids or basic amino acids, the yields were relatively high (63%--81%). However,when the carboxyl components were N-protected acidic amino acids, the yields were relatively low (47%--48%). The results expanded the application of DEPBT on the synthesis of bioactive peptides containing histidine.     

Cycloaddition of 2(1H)-pyridones having a methoxycarbonyl group to 1,3-butadiene derivatives

The cycloaddition of 4-methoxycarbonyl-2(1H)-pyridones to silyloxydienes gave isoquinolone derivatives in reasonable yields. Furthermore, the cycloaddition of 6-methoxycarbonyl-2(1H)-pyridones to 2,3-dimethyl-1,3-butadiene produced cycloadducts (isoquinolone and quinolone derivatives) and double cycloadducts (phenanthridone derivatives). The activation energies using Gaussian 98 with RHF/3-21G level of 4- and 6-methoxycarbonyl-2(1H)-pyridones coincided with the experimental facts.     

格氏试剂异构偶联法合成辅酶Q10

报道了一种利用2-甲基-3-氯-4-(2'-甲基-3',4',5',6'-四甲氧基苯)丁烯的格氏试剂与茄尼基溴发生异构偶联, 再氧化合成辅酶Q10的新方法. 发现了烯丙式格氏试剂与卤代烷经过六元环过渡态的异构偶联反应.     

水溶液中Ln(Ⅱ)-TTHA络合物的多核NMR研究

通过对11种镧系-三乙烯四胺六乙酸络合物诱导的²³Na、²H、¹⁷O和³⁵Cl的化学位移测定,研究了该系列络合物的位移试剂性质。结果表明,轴对称的Ln(TTHA)^3-络合物是较好的水溶性位移试剂,尤其是²³Na位移与理论偶极位移一致,表明此络合物是最好的正电荷底物之一。     

The preparation of HCF2CdX and HCF2ZnX via direct insertion into the carbon halogen bond of CF2HY (Y = Br, I)

The difluoromethylcadmium and zinc reagents have been prepared in DMF via direct insertion of Cd⁰ into the carbon halogen bond of CF₂HY (Y = Br, I). These reagents are stable at 65-75 °C and exhibit prolonged stability and activity at room temperature. Metathesis of the difluoromethylcadmium reagents with Cu(I)X (X = Br, Cl) at −55 °C rapidly produces difluoromethylcopper. The copper reagent is significantly less stable than the cadmium or zinc reagent and rapidly decomposes at room temperature. The difluoromethylcadmium and copper reagents exhibit good reactivity with allylic halides, propargylic derivatives and 1-iodoalkynes to provide good yields of the corresponding difluoromethylalkenes, difluoromethylallenes and difluoromethyl-2-alkynes. Alkylation is successful only with reactive alkyl halides. Generally, the difluoromethylcopper reagent is more reactive than the difluoromethylcadmium reagent and generally exhibits higher regioselectivity in reactions that can occur by either α- or γ-attack.     

Development of chlorotriazine polymer dehydrocondensing reagents (Poly-Trzs)

Polymer-type dehydrocondensing reagents comprising of a triazine dehydrocondensing reagent, itself in a polymerized form (Poly-Trz—MMs'), have been developed by exploiting the chemical properties of cyanuric chloride that readily binds to alcohol or amines. A chlorotriazine polymer bearing two alkoxy substituents at the 4- and 6- positions (Poly-O-Trz-Cl) was prepared by alternating copolymerization between cyanuric chloride and tetra(ethylene glycol). Similarly, polymers bearing both alkoxy and amino substituents (Poly-N-Trz-Cl) were synthesized from tetra(ethylene glycol) bis(4,6-dichlorotriazin-2-yl) ether 6 and tris(2-aminoethyl)amine 7 and/or ethylenediamine 8. All the polymers were shown to be good reagents for dehydrocondensation of carboxylic acids and amines in the presence of NMM, compared to the corresponding monomeric dehydrocondensing reagent (DMT-MM). The advantages of the polymeric reagents are as follows: (1) both the reaction and isolation procedure of dehydrocondensation can be greatly simplified, (2) the dehydrocondensation can be conducted in protic solvents as well as in common organic solvents, (3) the reagents can be efficiently prepared at a low cost, and (4) these reagents are considered eco-friendly, generating a lower amount of waste compared to conventionally related reagents because of high loading of the dehydrocondensing activity (ca. 3 mequiv/g).     

3-对甲氧基苯基-和3-对羟基苯基-1-氨基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈的合成和晶体结构

用低价钛试剂(TiCl₄-Zn)与2-氰基-3-对甲氧基苯基-3-(1-四氢萘酮-2-基)丙腈反应合成了3-对甲氧基苯基-1-氨 基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈和3-对羟基苯基-1-氨基-3a,4,5,9b-四氢化-9b-羟基-3H-环戊烯并[a]萘-2-甲腈, 并用X射线衍射分析确定了这两个产物的结构.