宽频段太赫兹光谱技术的抗坏血酸和硫胺素研究

采用太赫兹时域光谱(THz-TDS)和傅里叶变换红外光谱(FTIR),测量了L-抗坏血酸与硫胺素在0.10~3.50 THz的光谱特性。给出了两种维生素的分子模型,详细分析比较了抗坏血酸与硫胺素在两种方法测量下吸收光谱的异同。结果表明：利用太赫兹时域光谱和傅里叶红外光谱测得的特征吸收谱在0.70~3.00 THz完全吻合,而在较低频段0.30~0.50 THz,两种样品的傅里叶红外光谱展现了太赫兹时域光谱所没有的特征峰,同时硫胺素样品在8.00~12.00 THz范围内,8.75,8.85,9.00,9.30和10.30 THz出现指纹峰;研究了样品掺杂不同比例聚乙烯粉末时THz吸收光谱的差异,抗坏血酸对太赫兹吸收较弱,总结了两种维生素的折射率曲线与其吸收峰的对应关系;结果对抗坏血酸和硫胺素的分析识别以及维生素太赫兹光谱数据库的建立具有重要参考意义。     

光电子技术与器件 射线探测技术与装置

O441．4 2005042976 太赫兹(THz)成像的进展概况=Review of the progress of T-ray imaging[刊,中]／张蕾(首都师范大学物理系,北京 (100037)),徐新龙…／／量子电子学报,-2005,22(2),- 129-134 评述了太赫兹射线成像的进展情况。太赫兹(THz) 辐射介于微波和红外之间。与微波、X射线、核磁共振 (NMR)成像相比,太赫兹成像不仅能给出物体的密度信息,而且能给出频率域的信息,以及在光频、微波和X射线范围内所不能给出的材料的转动、振动信息。太赫兹射线与其他频段的电磁波相比,它能量低,不会造成对生物样     

不同参数多壁碳纳米管太赫兹谱特性

探索不同管径和长度的多壁碳纳米管(MWCNT)的太赫兹(THz)谱特性,采用透射型太赫兹时域光谱系统研究了5个不同管径和长度的MWCNT样品的太赫兹吸收谱和折射率谱,并对比和分析了它们的差异。结果表明:在0.2~2.0THz内,多壁碳纳米管太赫兹吸收没有特征吸收峰,吸收强度随着频率的增加而增加,并可以拟合为不同斜率的直线,且MWCNT在THz波段的吸收强度与管径和长度成正比。折射率随着频率的增加呈指数衰减,同时,管径是影响其折射率的一个重要因素,而长度对其影响不大。     

爆炸性物质太赫兹时间分辨光谱测量

利用自由空间电光取样方法,研究了四种炸药在太赫兹(THz)频段的光学特性。通过太赫兹时间分辨光谱测量,作者得到了四种炸药DNT(2,4-二硝基甲苯)、钝化的RDX(黑索今)、HMX(奥克托金)和TNT(2,4,6-三硝基甲苯)的透射光谱,进而计算得出它们在0.2～2.5 THz频段的吸收系数和折射率。作者发现,2,4-DNT在1.08 THz,HMX在1.82 THz存在显著的吸收尖峰,RDX在此频段存在多个吸收峰,TNT的吸收谱线相对其他三种样品比较平缓,这种共振吸收一般认为是由分子间相互作用或声子共振模式引起的。四种炸药对太赫兹波独特的吸收性质说明,太赫兹时间分辨光谱测量技术在炸药特征识别及安全检测领域具有潜在应用价值。作者对致癌物质偶氮苯进行了太赫兹光谱研究,发现了国产偶氮苯和进口偶氮苯在太赫兹波段均存在特征吸收峰,可用于物质鉴别。     

(Fe,N)共掺杂TiO2红外光谱的电负性原理研究

采用电负性原理,构建合理的红外光谱模型,对TiO2红外光谱的振动频率与元素电负性之间的各种经验关系进行探究.采用溶胶-凝胶法制备(Fe,N)共掺杂TiO2,利用X-射线衍射(XRD)、傅里叶红外光谱(FTIR)对样品的物相和红外光谱进行了表征.XRD物相分析表明当煅烧温度为600 ℃时,TiO2样品中的无定形结构己基本转化为锐钛矿型结构.随着煅烧温度升高,TiO2的X射线衍射峰逐渐由宽变窄,衍射强度由弱变强.当煅烧温度为700 ℃时,锐钛矿型的衍射峰基本消失,取而代之的是金红石相的衍射峰,但TiO2的主晶相并没有发生改变.红外光谱分析表明(Fe,N)共掺杂TiO2在650~500 cm-1区间有一个较宽的吸收峰.电负性模拟计算了(Fe,N)共掺杂TiO2红外光谱的伸缩振动频率,获得了Fe、N掺杂的位置、分子结构和键价特征:首先计算出约化质量μ,然后按照经典力学伸缩力常数k与频率V之间满足的关系,结合力常数与电负性关系、键级的计算方法,计算了基本单元都是氧八面体的掺杂金红石、锐钛矿TiO2的分子振动频率.结果表明:通过电负性理论计算的(Fe,N)共掺杂的TiO2的红外光谱与实验测量的红外光谱的伸缩振动频率比较吻合.     

基于太赫兹谱分析中药材鉴别

中草药分析与鉴定对中草药质量控制意义重大,以飞秒激光为基础的太赫兹时域光谱技术(THz-TDS)是一种新型相干远红外光谱测量技术。为了研究基于太赫兹谱的中药材鉴别可行性,应用THz-TDS研究了室温下黄芪、当归、杜仲及三种掺杂的黄芪在0.2~2.2 THz范围内的光学特性,得到了对应的时域谱、频域谱和吸收谱。结果表明在此波段三种中草药的时域谱、频域谱及吸收谱存在显著差异;三种掺杂黄芪的频域谱、吸收谱虽相似但也有明显不同。利用太赫兹时域光谱技术鉴别中药材是可行的,它可为中草药质量控制提供一种新的方法。     

组氨酸和精氨酸的太赫兹光谱研究

采用太赫兹时域光谱(THz-TDS)测试和理论模拟相结合的方法，研究了组氨酸和精氨酸在THz波段的光谱特性.THz-TDS测试的有效光谱范围为0.2—2.8 THz，在该波段得到样品的特征吸收峰分别位于0.88，1.64，2.23 THz(组氨酸)和0.99，1.47，2.60 THz(精氨酸)；运用Gaussian03半经验理论PM3和AM1算法，计算了两种分子在0.1—10.0 THz波段的振动吸收谱，结果表明它们在该波段均具有多个特征吸收，其中在0.2—2.8 THz波段的吸收峰位与实验吸收峰位相互对应并且符合较好；给出了与光谱特征吸收对应的分子振转模型，为认识分子对THz波的响应机制提供了帮助，也为分子鉴别及更宽有效光谱区的实验测试研究提供了科学依据. 关键词： 太赫兹(THz) 半经验理论 THz时域光谱 氨基酸     

1,4-萘醌的太赫兹,远红外及低频拉曼光谱研究

本文对1,4-萘醌进行了太赫兹时域光谱,远红外吸收光谱及低频拉曼散射谱的测试研究。1,4-萘醌的太赫兹吸收光谱与远红外谱仪测得的光谱取得了在1.75 THz(58.3 cm-1)/1.63 THz(54.3 cm-1)等处吸收峰位基本相同、两者相互佐证和补充的结果。将太赫兹和远红外吸收谱与低频拉曼散射谱进行比较,表明两种选择机制不同的光谱在1.04,1.72和4.59 THz等处的峰位基本重合,结合群论的不可约表示理论分析,表明该样品在低频波段具有拉曼活性和红外活性的振动属性(A1、B1或B2)。采用Gaussi-an03软件的密度泛函理论B3LYP函数和6-311基组模拟单分子红外与拉曼光谱,结合实验分析,对部分分子基团或原子振转模式给与了指认。     

炙没药颗粒的不同尺寸对太赫兹吸收光谱的影响

一般来说,当粒子线度a与光波长λ可以比拟(a/λ数量级为0.1~10)甚至更大时,会产生米氏散射,导致无法有效检测高频波段太赫兹光谱的吸收峰以及会引起光谱重复性和信噪比的降低。本文分别用远红外傅里叶变换红外光谱仪(Far-infrared Fourier transform infrared spectrometer,Far-infrared FTIR,30~600cm-1)和太赫兹时域光谱仪(Terahertz time-domain spectrometer,THz-TDS,0.2–3.5THz),对4组不同颗粒尺寸的炙没药进行测试,得到的低频吸收峰位置基本相同。由于米氏散射影响,在385cm-1以后,无法有效检测吸收峰波形。通过计算协方差发现,随着药品颗粒尺寸减小,散射对于太赫兹吸收光谱影响越小,即光谱重复性越好,信噪比越高。     

基于太赫兹光谱的氨基酸检测

太赫兹是指频率从0.1到2.0 THz之间的远红外波。与傅里叶红外相比,太赫兹时域光谱能量低,信躁比高,并且无辐射损伤。氨基酸分子的低频振动模式(扭转,集体振动模式和氢键)处在 THz波段。氨基酸是一类重要的生物分子,是组成蛋白质最基本的物质。氨基酸分子以分子间氢键相互连接构成晶体。氨基酸在THz波段比在红外波段体现更多独特吸收特征。到目前为止,已经获得了20种氨基酸分子的太赫兹吸收谱,包括利用太赫兹技术对部分氨基酸的定量分析。氨基酸的太赫兹光谱研究,有利于深层次理解蛋白质/ DNA的低频振动模式及相关生物反应和活性。文章综述了20种氨基酸分子的太赫兹吸收光谱并建立了吸收光谱数据库。总结了太赫兹技术在氨基酸应用方面存在的问题,并对未来发展方向进行展望。     

Preparation,characterization, and conductivity of YLnTiZrO7 (Ln = La,Nd, Sm,and Eu)

The pyrochlore oxide of composition YLnTiZrO₇ (Ln?=?La, Nd, Sm, and Eu) was prepared by sol–gel method. All the samples were characterized by powder X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), diffused reflectance spectroscopy, and impedance spectroscopy. The powder XRD and Raman studies reveal that these samples were crystallized in cubic lattice with pyrochlore structure. The Rietveld analysis of the samples was carried out to obtain the unit cell parameters and reliability factors. The broad Raman bands observed for all the samples are due to cation/anion disorder in the lattice and nanosize. The XPS analysis of the samples shows the characteristic peaks belonging to Y³⁺, Ln³⁺ (Ln?=?La, Nd, Sm, and Eu), Ti⁴⁺, and Zr⁴⁺. Electrical conductivity of YLaTiZrO₇ (YLTZ) and YEuTiZrO₇ (YETZ) samples was calculated from the impedance as a function of frequency and temperature. These samples have shown conductivity of the order of 10^?5 scm^?1 at 500 °C.     

镧系元素双1：11系列杂多蓝的红外光谱和紫外光谱研究

本文首次系统研究了镧系元素钼采双１：１１系列两子杂多蓝ＫｚＨｙ（Ｌｎ（ＸＭｏ１１Ｏ３９０２）．ｎＨ２Ｏ（Ｘ＝Ｐ，Ｌｎ＝Ｌａ，Ｃｅ，Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ；Ｘ＝Ｓｉ，Ｌｎ＝Ｃｅ，Ｐｒ，Ｓｍ，Ｔｂ，Ｄｙ）的红外光谱和紫外光谱，对特征峰进行指认，并与还原前的杂多酸盐进行比较，发现有的特征峰出现小的位移，有的峰强度稍有变化，所以得出结论，还原前后，杂多阴离子结构基本不变，但有轻微的畸变。     

稀土硅钨杂多配合物与半菁复合材料的合成及光学性质

通过Keggin结构稀土硅钨杂多配合物K₁₃[Ln(SiW₁₁O₃₉)₂] (其中Ln=La,Ce,Pr,Nd,Sm,简写为Ln(SiW₁₁)₂)与碘化(E)-N-甲基-4-(2-(4-二甲氨基苯基)乙烯基)吡啶(C₁₆H₁₉N₂I,AI)反应,制备了一系列含轻稀土元素的硅钨杂多配合物与半菁衍生物的复合材料。应用元素分析和TG-DTA确定配合物的组成为(C₁₆H₁₉N₂)₁₀K₃[Ln(SiW₁₁O₃₉)₂]。利用红外光谱、紫外-可见光谱和荧光光谱研究了上述复合材料的光学性质及复合材料中无机组分与有机组分间的相互作用。     

香兰素对甲苯胺希夫碱稀土配合物的红外光声光谱

研究了香兰素对甲苯胺希夫碱及其金属配合物在３８００－２００ ｃｍ＾－１范围的傅里叶变换红外光谱光谱，对主要谱带进行了经验归属。     

Combined Study of Structural,Magnetic and Transport Properties of Eu_(0.5)Ln_(0.5)BiS_2F Superconductor

Superconductivity below 0.3 K and a charge-density-wave-like(CDW-like) anomaly at 280 K were observed in EuBiS_2F recently.Here we report a systematic study of structural and transport properties in Eu_(0.5)Ln_(0.5)BiS_2F(Ln=La,Ce,Pr,Nd,Sm) by electrical resistivity,magnetization,and specific heat measurements.The lattice constants have a significant change upon rare earth substitution for Eu,suggesting an effective doping.As Ln is changed from Sm to La,the superconducting transition temperature T_c increases from 1.55 K to 2.8 K.In contrast to the metallic parent compound,the temperature dependence of electrical resistivity displays semiconductinglike behavior for all the Eu_(0.5)Ln_(0.5)BiS_2F samples.Meanwhile,the CDW-like anomaly observed in EuBiS2F is completely suppressed.Unlike the mixed valence state in the undoped compound,Eu ions in these rareearth-doped samples are mainly divalent.A specific anomaly at 1.3 K resembling that in EuBiS2F suggests the coexistence of superconductivity and spin glass state for Eu_(0.5)La_(0.5)BiS_2F.Coexistence of ferromagnetic order and superconductivity is found below 2.2 K in Eu_(0.5)Ce_(0.5)BiS_2F samples.Our results supplies a rich diagram showing that many interesting properties can be induced in BiS_2-based compounds.     

Synthesis, characterization and photoluminescent properties of rare-earth hydroxides and oxides nanorods by hydrothermal route

The stable and crystalline pure phase Ln(OH)₃ (Ln=La, Nd, Sm, Eu, Gd, Tb, and Dy) nanorods are synthesized by a facile hydrothermal method using the simple chemical materials (rare-earth chloride hexahydrate LnCl₃?6H₂O and NH₃?H₂O) and polymer polyvinypyrrolidone (PVP). The as-prepared Ln(OH)₃ nanorods can be successfully converted to Ln₂O₃ nanorods via calcination under appropriate conditions. X-ray diffraction (XRD) spectra, Fourier transformed infrared (FTIR) spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-Resolution TEM (HRTEM), and Raman spectroscopy were used to examine the morphologies and microstructures to find out the cause. The analyzed results indicate that the obtained nanorods are rare-earth hydroxides and oxides with 1D nanostructures. The formation mechanism of the Ln(OH)₃ and Ln₂O₃ nanorods was investigated. Optical properties of the Ln(OH)₃ and Ln₂O₃ nanorods were determined by photoluminescence (PL). Ln(OH)₃ and Ln₂O₃ nanorods exhibit a strong blue emission with the strongest narrow bands at about 469 nm corresponding to the intra-4f transitions ⁵D₂→⁷F₆, which have potential applications in fluorescent devices.     

Phase transitions of lanthanide monophosphides with NaCl-type structure at high pressures

Lanthanide monophosphides LnP (Ln = La, Ce, Pr, Nd, Sm, Gd, Tb, Tm and Yb) with a NaCl-type structure have systematically been prepared at high temperatures. Using synchrotron radiation, X-ray diffractions of LnP have been studied up to 61 GPa at room temperature. The NaCl---CsCl transition for CeP is found at around 25 GPa. First-order phase transitions of LnP (Ln = La, Pr and Nd) with the crystallographic change occur at around 24, 26 and 30 GPa, respectively. The structure of the high pressure phases of these phosphides is a body center tetragonal structure (Ln: 0, 0, 0; P: 1/2, 1/2, 1/2; space group P4/mmm), which can be seen as the distorted CsCl-type structure. The Pr---P distance in the high pressure form of PrP is 2.789 Å. This almost agrees with the sum of covalent radii of Pr and P. The Pr---P bond has the covalent character at very high pressures. Similar results are also obtained for LaP and NdP. The pressure-induced phase transitions of SmP, GdP, TbP, TmP and YbP occur at around 35, 40, 38, 53 and 51 GPa, respectively. The structure of the high pressure phase is unknown. The phase transitions of LnP with many f-electrons are not due to the mechanism of the ordinary NaCl---CsCl transition. The transition pressures of LnP increase with decreasing the lattice constants in the NaCl-type structure, which decrease with increasing atomic number of the lanthanide atoms.     

Temperature-dependent electrical, elastic and magnetic properties of sol-gel synthesized Bi(0.9)Ln(0.1)FeO3 (Ln = Nd, Sm)

This report details correlated electrical, mechanical and magnetic behaviour in BiFeO(3) ceramics doped with 10% Ln (Ln = Sm, Nd) ions on the Bi, or perovskite A, site and synthesized by a sol-gel method. The ceramics exhibit bulk piezoelectric and ferroelectric properties and clear ferroelectric domain patterns through piezoresponse force microscopy. Resonant ultrasound spectroscopy, dielectric spectroscopy and magnetometry studies show correlated magnetoelectromechanical behaviour and the existence of weak ferromagnetism for both compositions. An anomaly with simultaneous mechanical and magnetic signatures is discovered in both materials near room temperature, while previously reported transitions and anomalies are found to exhibit electro- and/or magnetomechanical coupling. Magnetism is significantly enhanced in the Sm doped sample, which is a promising multiferroic material.     

Dielectric and optical properties of Ln0.8Lu0.2TiNbO6 (Ln = Ce,Pr, Nd & Sm) ceramics

Ln_0.8Lu_0.2TiNbO₆ (Ln = Ce, Pr, Nd & Sm) are synthesized through conventional solid state ceramic route. The XRD, FT Raman and FT IR studies revealed that the samples have aeschynite orthorhombic symmetry. The samples are sintered at 1230 ^∘C. Using SEM technique, microstructure of the sintered samples is analyzed. The dielectric properties of all the samples in the radio as well as microwave frequencies are studied. UV spectra of the samples are recorded and the optical band gap is estimated from the Tauc's plots. The samples are found to be photoluminescent materials with emissions at violet and green regions.     

Ce-EU-1分子筛的合成和表征

采用水热法,以溴化六甲双铵（HMBr2）为模板剂,硅溶胶、偏铝酸钠为硅铝源,以六水硝酸铈为铈源合成了稀土Ce-EU-1分子筛,并通过XRD、FTIR、紫外-可见漫反射光谱、热重分析（TG-DTG）和氮气吸附-脱附等测试手段对合成样品的孔道结构、物化性能及Ce的存在状态进行了表征。XRD结果表明,合成样品不仅具有很高的纯度和结晶度,为典型的立方有序排列的EU-1结构,而且部分Ce已取代Si或Al进入微孔分子筛的骨架。样品的FTIR图谱在980cm-1附近有明显的Si—O—Ce特征吸收峰,证明Ce存在于分子筛的骨架中。紫外-可见漫反射图谱显示,在253nm附近出现O—Ce之间的电子跃迁特征峰,进一步证明了Ce进入了分子筛骨架。氮气吸附-脱附结果表明了Ce的掺入对分子筛的物化性能和孔道结构产生了影响。同时考察了镧系其他金属离子（Ln：La、Nd、Sm和Gd）对EU-1分子筛的影响,发现随着镧系离子半径的减小,Ln-EU-1分子筛的相对结晶度逐渐降低,晶胞体积减小。