大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间     

特殊形态接枝高分子颗粒的合成

表面接枝高分子微球具有分子结构的可设计性 ,分散稳定性好 ,被用于高效催化剂的载体、药物释放控制和疾病治疗等生物医学领域 ,因而引起了许多高分子材料和生物医学工作者的极大兴趣[1～ 3] .我们用链转移自由基聚合法合成了一端为苯乙烯基封端的聚乙二醇 ( PEG)和聚 ( N -异丙基丙烯酰胺 )等亲水性大分子单体 .在与疏水性单体如苯乙烯等的二元分散共聚反应中 ,利用接枝共聚物在溶液中的自组装 ,制备了粒径分布均一 ,颗粒表面形态光滑 ,同时表面具有功能性高分子链的微球 [4～ 8] .传统的合成高分子微球的研究主要是以苯乙烯或甲基丙烯酸…     

Fe-g-PDEAEMA纳米复合微球的制备及性质研究

由聚N,N-二乙基胺基甲基丙烯酸乙酯(PDEAEMA)与铁纳米颗粒复合制得的纳米铁基复合材料。纳米铁微球表面钝化形成Fe3O4后,将多巴胺基引发剂修饰在Fe3O4的表面,通过表面引发原子转移自由基聚合(SI-ATRP)将DEAEMA单体聚合在修饰了多巴胺基引发剂的表面获得Fe-g-PDEAEMA复合微球。显微结果表明修饰PDEAEMA后,复合微球的分散性得到了一定的提高;XRD数据表明在纳米铁表面生成了一层Fe3O4壳。利用透光率测定研究了复合微球的p H敏感性,表明在酸性条件下悬浮性良好,在碱性条件下发生了沉降,复合微球具有p H敏感性。通过还原降解酸性大红染料,表明Fe-g-PDEAEM复合微球与纳米铁相比,其还原性有所提高,合成的Fe-g-PDEAEMA复合微球可用于氯代烃等氯化物污染的水体保护。     

用于固定抗体的新型温敏性核—壳结构聚合物微球的合成及其初步应用研究

利用无皂乳液聚合和种子聚合的方法合成了一种以聚苯乙烯为核,聚(N-异丙基丙烯酰胺-co-N-丙烯酸琥珀酰亚胺酯)为壳的单分散的核-壳结构的聚合物微球.用扫描电镜和透射电镜观察了球的形貌特征,发现微球具有清晰的核-壳结构和较好的单分散性,红外光谱显示了在1738cm-1处有酯羰基的特征吸收峰.动态光散射测定发现该聚合物微球具有温敏性,当温度高于聚N-异丙基丙烯酰胺的最低临界溶液温度(LCST)时,球的流体力学直径变小.利用微球壳层所含有的琥珀酰亚胺酯基与伯氨基的高反应活性,将抗体Rabbit IgG化学固定在球的壳层上.由于壳层的聚N-异丙基丙烯酰胺具有温敏性,反应温度不同结合的抗体的量也不同,在0℃和36.5℃,微球对抗体的结合率分别为61.6%和38.6%.     

两种磁性复合微球的制备及其性能对比

为了得到蛋白吸附性能良好的免疫磁性载体,文章用反相微乳的方法合成了壳聚糖磁性复合微球(Chitosanmagneticcompositemicrospheres简称CMCM),与常用的单体聚合法制备的聚苯乙烯磁性复合微球(Polystyrenemagneticcompositemicrospheres,简称PMCM)从粒径和表观形貌、微球铁含量、磁响应性、表面官能基团等性质做了对比表征,结果表明,CMCM是一种比PMCM更理想的免疫磁性微球载体材料。     

分散聚合法制备液相芯片聚苯乙烯磁性复合微球的研究

本文将丙烯酸基磁流体均匀分散到苯乙烯单体中,采用分散聚合法制备出了适于构建液相芯片微球载体的单分散性微米级磁性微球.考察了丙烯酸基磁流体预处理时间、加料顺序和单体量对微球形貌和粒径分布的影响及其条件优化.扫描电镜(SEM)显示磁性微球平均粒径为7.77 μm,具有良好的单分散性(多分散指数PDI为1.03),并且表面光滑致密;用超导量子干涉磁强计测量了Fe3O4纳米粒子的磁化曲线;用红外光谱(FT-IR)和热失重(TG)方法表征了磁性微球的化学结构及Fe3O4含量.     

无机材料/天然高分子复合微球的制备研究进展

微球是一种新型药物载体,具有很大的开发与应用潜力.天然高分子具有良好的生物相容性、可降解性,易在生物体内分散,可制备成微球.无机材料(主要为无机矿物)力学性能优良,且价廉易得.通过天然高分子与无机材料两者耦合杂化作用,可优势互补、协同增效,进而产生许多优异的理化性能.使用无机材料改性天然高分子,通过乳化交联法、溶液混合法、原位合成法、挤出法等多种方法可制备得到无机材料/天然高分子复合微球.将无机材料/天然高分子复合微球应用于药物传递系统中,缓释效果明显,安全无毒害,且载体材料价格相对低廉,对于开发新型药物载体具有一定的意义.本文综述了近年无机材料/天然高分子复合微球的制备、载药与释药性能的相关研究,分析了常用制备方法的利弊,展望了复合微球的发展方向.     

聚合物微球固载N-羟基邻苯二甲酰亚胺催化剂的制备及其催化氧化性能初探

首先采用悬浮聚合法,制备了甲基丙烯酸缩水甘油酯(GMA)和甲基丙烯酸甲酯(MMA)的交联聚合物微球(GMA/MMA),然后经过几步大分子反应在微球表面合成与固载了N-羟基邻苯二甲酰亚胺(NHPI),形成固载有NHPI的功能微球GMA/MMA-NHPI。采用红外光谱(FT-IR)及扫描电子显微镜(SEM)等方法对功能微球进行了表征。结果表明,以含环氧基团的GMA/MMA为载体,通过大分子反应可实现NHPI的合成与固载。GMA/MMA-NHPI与醋酸钴(Co(OAc)2)构成的共催化体系,在分子氧对环己烷和环己醇的氧化过程中,显示出良好的催化活性。     

一种新型氨基磁性微球的制备及表征

采用化学共沉淀法制备油酸包被的Fe3O4纳米粒子,以此Fe3O4纳米粒子为核,采用分散聚合法合成了表面带有氨基功能基团的磁性微球。利用透射电镜(TEM)、X射线衍射仪(XRD)、振动样品磁强计(VSM)和傅里叶变换红外光谱仪(FT-IR)对两种磁性微球进行了表征,并采用电位滴定法测定了微球表面的氨基含量。结果表明,微球粒径均匀,为10 nm左右,具有超顺磁性,饱和磁化强度约为50 emu/g,氨基基团含量达486μmol/g。     

丝素改性聚乳酸-羟基乙酸共聚物多孔微球作为牙龈间充质干细胞递送载体的研究

利用复乳-溶剂挥发法合成适合细胞三维培养的聚乳酸-羟基乙酸共聚物(PLGA)多孔微球, 并对其表面进行丝素改性, 利用扫描电子显微镜、 能谱、 红外光谱和X射线衍射等对改性前后PLGA多孔微球的理化特性进行表征. 原代培养人牙龈间充质干细胞并进行成骨(茜素红染色)成脂(油红O染色)分化鉴定. 通过负压混悬法将牙龈干细胞负载于丝素改性的PLGA多孔微球上进行5-乙炔基-2'-脱氧尿嘧啶核苷(EdU)细胞增殖及成骨分化研究. 结果表明, 原代培养的牙龈干细胞具有多向分化潜能, 负载在丝素改性的PLGA多孔微球上的细胞有利于细胞增殖. 丝素改性的PLGA多孔微球是良好的细胞递送载体, 为进一步修复牙槽骨缺损提供了科学依据.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.