A semi‐Lagrangian multi‐moment finite volume method with fourth‐order WENO projection

Numerical oscillation has been an open problem for high‐order numerical methods with increased local degrees of freedom (DOFs). Current strategies mainly follow the limiting projections derived originally for conventional finite volume methods and thus are not able to make full use of the sub‐cell information available in the local high‐order reconstructions. This paper presents a novel algorithm that introduces a nodal value‐based weighted essentially non‐oscillatory limiter for constrained interpolation profile/multi‐moment finite volume method (CIP/MM FVM) (Ii and Xiao, J. Comput. Phys., 222 (2007), 849–871) as an effort to pursue a better suited formulation to implement the limiting projection in schemes with local DOFs. The new scheme, CIP‐CSL‐WENO4 scheme, extends the CIP/MM FVM method by limiting the slope constraint in the interpolation function using the weighted essentially non‐oscillatory (WENO) reconstruction that makes use of the sub‐cell information available from the local DOFs and is built from the point values at the solution points within three neighboring cells, thus resulting a more compact WENO stencil. The proposed WENO limiter matches well the original CIP/MM FVM, which leads to a new scheme of high accuracy, algorithmic simplicity, and computational efficiency. We present the numerical results of benchmark tests for both scalar and Euler conservation laws to manifest the fourth‐order accuracy and oscillation‐suppressing property of the proposed scheme. Copyright © 2016 John Wiley & Sons, Ltd.     

Third‐order WENO scheme with a new smoothness indicator

In this article, we have devised a new reference smoothness indicator for third‐order weighted essentially non‐oscillatory (WENO) scheme to achieve desired order of convergence at critical points. In the context of the weighted essentially non‐oscillatory scheme, reference smoothness indicator is constructed in such a way that it satisfies the sufficient condition on the weights for the third‐order convergence. The goal is to construct a reference smoothness indicator such that the resulted scheme have to achieve the required order of accuracy even if the first two derivatives vanish but not the third derivative. The construction of such reference smoothness indicator is not possible through a linear combination of local smoothness indicators only. We have proposed a reference smoothness indicator to be of the fourth order of accuracy on three‐point stencil that contains the linear combination of the first derivative information of the local and global stencils. The performance enhancement of the WENO scheme through this reference smoothness indicator is verified through the standard numerical experiments. Numerical results indicate that the new scheme provides better results in comparison with the earlier third‐order WENO schemes like WENO‐JS and WENO‐Z. Copyright © 2017 John Wiley & Sons, Ltd.     

High‐order ENO and WENO schemes for unstructured grids

This work describes the implementation and analysis of high‐order accurate schemes applied to high‐speed flows on unstructured grids. The class of essentially non‐oscillatory schemes (ENO), that includes weighted ENO schemes (WENO), is discussed in the paper with regard to the implementation of third‐ and fourth‐order accurate methods. The entire reconstruction process of ENO and WENO schemes is described with emphasis on the stencil selection algorithms. The stencils can be composed by control volumes with any number of edges, e.g. triangles, quadrilaterals and hybrid meshes. In the paper, ENO and WENO schemes are implemented for the solution of the dimensionless, 2‐D Euler equations in a cell centred finite volume context. High‐order flux integration is achieved using Gaussian quadratures. An approximate Riemann solver is used to evaluate the fluxes on the interfaces of the control volumes and a TVD Runge–Kutta scheme provides the time integration of the equations. Such a coupling of all these numerical tools, together with the high‐order interpolation of primitive variables provided by ENO and WENO schemes, leads to the desired order of accuracy expected in the solutions. An adaptive mesh refinement technique provides better resolution in regions with strong flowfield gradients. Results for high‐speed flow simulations are presented with the objective of assessing the implemented capability. Copyright © 2007 John Wiley & Sons, Ltd.     

Well‐balanced finite difference weighted essentially non‐oscillatory schemes for the blood flow model

The blood flow model maintains the steady‐state solutions, in which the flux gradients are non‐zero but exactly balanced by the source term. In this paper, we design high order finite difference weighted essentially non‐oscillatory (WENO) schemes to this model with such well‐balanced property and at the same time keeping genuine high order accuracy. Rigorous theoretical analysis as well as extensive numerical results all indicate that the resulting schemes verify high order accuracy, maintain the well‐balanced property, and keep good resolution for smooth and discontinuous solutions. Copyright © 2016 John Wiley & Sons, Ltd.     

A novel weighting switch function for uniformly high‐order hybrid shock‐capturing schemes

Hybrid schemes are very efficient for complex compressible flow simulation. However, for most existing hybrid schemes in literature, empirical problem‐dependent parameters are always needed to detect shock waves and hence greatly decrease the robustness and accuracy of the hybrid scheme. In this paper, based on the nonlinear weights of the weighted essentially non‐oscillatory (WENO) scheme, a novel weighting switch function is proposed. This function approaches 1 with high‐order accuracy in smooth regions and 0 near discontinuities. Then, with the new weighting switch function, a seventh‐order hybrid compact‐reconstruction WENO scheme (HCCS) is developed. The new hybrid scheme uses the same stencil as the fifth‐order WENO scheme, and it has seventh‐order accuracy in smooth regions even at critical points. Numerical tests are presented to demonstrate the accuracy and robustness of both the switch function and HCCS. Comparisons also reveal that HCCS has lower dissipation and less computational cost than the seventh‐order WENO scheme. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of central differencing and low‐dissipation weights in a weighted compact nonlinear scheme

This paper proposes WCNS‐CU‐Z, a weighted compact nonlinear scheme, that incorporates adapted central difference and low‐dissipative weights together with concepts of the adaptive central‐upwind sixth‐order weighted essentially non‐oscillatory scheme (WENO‐CU) and WENO‐Z schemes. The newly developed WCNS‐CU‐Z is a high‐resolution scheme, because interpolation of this scheme employs a central stencil constructed by upwind and downwind stencils. The smoothness indicator of the downwind stencil is calculated using the entire central stencil, and the downwind stencil is stopped around the discontinuity for stability. Moreover, interpolation of the sixth‐order WCNS‐CU‐Z exhibits sufficient accuracy in the smooth region through use of low‐dissipative weights. The sixth‐order WCNS‐CU‐Zs are implemented with a robust linear difference formulation (R‐WCNS‐CU6‐Z), and the resolution and robustness of this scheme were evaluated. These evaluations showed that R‐WCNS‐CU6‐Z is capable of achieving a higher resolution than the seventh‐order classical robust weighted compact nonlinear scheme and can provide a crisp result in terms of discontinuity. Among the schemes tested, R‐WCNS‐CU6‐Z has been shown to be robust, and variable interpolation type R‐WCNS‐CU6‐Z (R‐WCNS‐CU6‐Z‐V) provides a stable computation by modifying the first‐order interpolation when negative density or negative pressure arises after nonlinear interpolation. Copyright © 2016 John Wiley & Sons, Ltd.     

Hermite WENO-based limiters for high order discontinuous Galerkin method on unstructured grids

A novel class of weighted essentially nonoscillatory (WENO) schemes based on Hermite polynomials,termed as HWENO schemes,is developed and applied as limiters for high order discontinuous Galerkin (DG) method on triangular grids.The developed HWENO methodology utilizes high-order derivative information to keep WENO reconstruction stencils in the von Neumann neighborhood.A simple and efficient technique is also proposed to enhance the smoothness of the existing stencils,making higher-order scheme stable and simplifying the reconstruction process at the same time.The resulting HWENO-based limiters are as compact as the underlying DG schemes and therefore easy to implement.Numerical results for a wide range of flow conditions demonstrate that for DG schemes of up to fourth order of accuracy,the designed HWENO limiters can simultaneously obtain uniform high order accuracy and sharp,essentially non-oscillatory shock transition.     

Linear stability of WENO schemes coupled with explicit Runge–Kutta schemes

This paper focuses on the results of the linear stability analysis of the finite‐difference weighted essentially non‐oscillatory (WENO) schemes with optimal weights. The standard WENO schemes between the third and 11th order, the order‐optimised WENO schemes of the sixth and eighth order and the bandwidth‐optimised WENO schemes of the third and fourth order are considered. Several explicit Runge–Kutta schemes including the recently published strong stability‐preserving explicit Runge–Kutta schemes are considered for time discretisation. The stability limits as well as dissipation and dispersion properties dependent on the Courant–Friedrichs–Lewy number are presented for a hyperbolic model equation. The different combinations of space and time discretisation schemes are compared in terms of their accuracy and efficiency. For a parabolic model equation, the viscous term is discretised with high‐order central differences. The stability limits for the parabolic problem are presented as well. Numerical results of linear test cases are shown. Copyright © 2011 John Wiley & Sons, Ltd.     

Convergence issues in using high‐resolution schemes and lower–upper symmetric Gauss–Seidel method for steady shock‐induced combustion problems

This paper reports numerical convergence study for simulations of steady shock‐induced combustion problems with high‐resolution shock‐capturing schemes. Five typical schemes are used: the Roe flux‐based monotone upstream‐centered scheme for conservation laws (MUSCL) and weighted essentially non‐oscillatory (WENO) schemes, the Lax–Friedrichs splitting‐based non‐oscillatory no‐free parameter dissipative (NND) and WENO schemes, and the Harten–Yee upwind total variation diminishing (TVD) scheme. These schemes are implemented with the finite volume discretization on structured quadrilateral meshes in dimension‐by‐dimension way and the lower–upper symmetric Gauss–Seidel (LU–SGS) relaxation method for solving the axisymmetric multispecies reactive Navier–Stokes equations. Comparison of iterative convergence between different schemes has been made using supersonic combustion flows around a spherical projectile with Mach numbers M = 3.55 and 6.46 and a ram accelerator with M = 6.7. These test cases were regarded as steady combustion problems in literature. Calculations on gradually refined meshes show that the second‐order NND, MUSCL, and TVD schemes can converge well to steady states from coarse through fine meshes for M = 3.55 case in which shock and combustion fronts are separate, whereas the (nominally) fifth‐order WENO schemes can only converge to some residual level. More interestingly, the numerical results show that all the schemes do not converge to steady‐state solutions for M = 6.46 in the spherical projectile and M = 6.7 in the ram accelerator cases on fine meshes although they all converge on coarser meshes or on fine meshes without chemical reactions. The result is based on the particular preconditioner of LU–SGS scheme. Possible reasons for the nonconvergence in reactive flow simulation are discussed.Copyright © 2012 John Wiley & Sons, Ltd.     

Simulation of multiple shock–shock interference using implicit anti‐diffusive WENO schemes

Accurate computations of two‐dimensional turbulent hypersonic shock–shock interactions that arise when single and dual shocks impinge on the bow shock in front of a cylinder are presented. The simulation methods used are a class of lower–upper symmetric‐Gauss–Seidel implicit anti‐diffusive weighted essentially non‐oscillatory (WENO) schemes for solving the compressible Navier–Stokes equations with Spalart–Allmaras one‐equation turbulence model. A numerical flux of WENO scheme with anti‐diffusive flux correction is adopted, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of first‐order dissipative methods. Experimental flow fields of type IV shock–shock interactions with single and dual incident shocks by Wieting are computed. By using the WENO scheme with anti‐diffusive flux corrections, the present solution indicates that good accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Computed surface pressure distribution and heat transfer rate are also compared with experimental data and other computational results and good agreement is found. Copyright © 2009 John Wiley & Sons, Ltd.     

Well‐balanced discontinuous Galerkin method and finite volume WENO scheme based on hydrostatic reconstruction for blood flow model in arteries

The blood flow model in arteries admits the steady state solutions, for which the flux gradient is nonzero, and is exactly balanced by the source term. In this paper, by means of hydrostatic reconstruction, we construct a high order discontinuous Galerkin method, which exactly preserves the dead‐man steady state, which is characterized by a discharge equal to zero (analogue to hydrostatic equilibrium). Moreover, the method maintains genuine high order of accuracy. Subsequently, we apply the key idea to finite volume weighted essentially non‐oscillatory schemes and obtain a well‐balanced finite volume weighted essentially non‐oscillatory scheme. Extensive numerical experiments are performed to verify the well‐balanced property, high order accuracy, as well as good resolution for smooth and discontinuous solutions.     

Implicit weighted essentially non‐oscillatory schemes for the incompressible Navier–Stokes equations

A class of lower–upper/approximate factorization (LUAF) implicit weighted essentially non‐oscillatory (ENO; WENO) schemes for solving the two‐dimensional incompressible Navier–Stokes equations in a generalized co‐ordinate system is presented. The algorithm is based on the artificial compressibility formulation, and symmetric Gauss–Seidel relaxation is used for computing steady state solutions while symmetric successive overrelaxation is used for treating time‐dependent flows. WENO spatial operators are employed for inviscid fluxes and central differencing for viscous fluxes. Internal and external viscous flow test problems are presented to verify the numerical schemes. The use of a WENO spatial operator not only enhances the accuracy of solutions but also improves the convergence rate for the steady state computation as compared with using the ENO counterpart. It is found that the present solutions compare well with exact solutions, experimental data and other numerical results. Copyright © 1999 John Wiley & Sons, Ltd.     

Weighted essential non‐oscillatory schemes for tidal bore on unstructured meshes

In this paper, the third‐order weighted essential non‐oscillatory (WENO) schemes are used to simulate the two‐dimensional shallow water equations with the source terms on unstructured meshes. The balance of the flux and the source terms makes the shallow water equations fit to non‐flat bottom questions. The simulation of a tidal bore on an estuary with trumpet shape and Qiantang river is performed; the results show that the schemes can be used to simulate the current flow accurately and catch the stronger discontinuous in water wave, such as dam break and tidal bore effectively. Copyright © 2008 John Wiley & Sons, Ltd.     

High‐order k‐exact WENO finite volume schemes for solving gas dynamic Euler equations on unstructured grids

This paper presents a family of High‐order finite volume schemes applicable on unstructured grids. The k‐exact reconstruction is performed on every control volume as the primary reconstruction. On a cell of interest, besides the primary reconstruction, additional candidate reconstruction polynomials are provided by means of very simple and efficient ‘secondary’ reconstructions. The weighted average procedure of the WENO scheme is then applied to the primary and secondary reconstructions to ensure the shock‐capturing capability of the scheme. This procedure combines the simplicity of the k‐exact reconstruction with the robustness of the WENO schemes and represents a systematic and unified way to construct High‐order accurate shock capturing schemes. To further improve the efficiency, an efficient problem‐independent shock detector is introduced. Several test cases are presented to demonstrate the accuracy and non‐oscillation property of the proposed schemes. The results show that the proposed schemes can predict the smooth solutions with uniformly High‐order accuracy and can capture the shock waves and contact discontinuities in high resolution. Copyright © 2011 John Wiley & Sons, Ltd.     

Adaptive mesh refinement techniques for high‐order shock capturing schemes for multi‐dimensional hydrodynamic simulations

The numerical simulation of physical phenomena represented by non‐linear hyperbolic systems of conservation laws presents specific difficulties mainly due to the presence of discontinuities in the solution. State of the art methods for the solution of such equations involve high resolution shock capturing schemes, which are able to produce sharp profiles at the discontinuities and high accuracy in smooth regions, together with some kind of grid adaption, which reduces the computational cost by using finer grids near the discontinuities and coarser grids in smooth regions. The combination of both techniques presents intrinsic numerical and programming difficulties. In this work we present a method obtained by the combination of a high‐order shock capturing scheme, built from Shu–Osher's conservative formulation (J. Comput. Phys. 1988; 77 :439–471; 1989; 83 :32–78), a fifth‐order weighted essentially non‐oscillatory (WENO) interpolatory technique (J. Comput. Phys. 1996; 126 :202–228) and Donat–Marquina's flux‐splitting method (J. Comput. Phys. 1996; 125 :42–58), with the adaptive mesh refinement (AMR) technique of Berger and collaborators (Adaptive mesh refinement for hyperbolic partial differential equations. Ph.D. Thesis, Computer Science Department, Stanford University, 1982; J. Comput. Phys. 1989; 82 :64–84; 1984; 53 :484–512). Copyright © 2006 John Wiley & Sons, Ltd.     

Preventing numerical oscillations in the flux‐split based finite difference method for compressible flows with discontinuities,II

Problems in the characteristic‐wise flux‐split based finite difference method when compressible flows with contact discontinuities or material interfaces are computed were presented and analyzed. The current analysis showed the following: (i) Even with the local characteristic decomposition technique, numerical errors could be caused by point‐wise flux vector splitting (FVS) methods, such as the Steger–Warming FVS or the van Leer FVS. Therefore, the Lax–Friedrichs type FVS method is required. (ii) If the isobars of a material are vertical lines, the combination of using the local characteristic decomposition and the global Lax–Friedrichs FVS can avoid velocity and pressure oscillations of contact discontinuities in this material for weighted essentially non‐oscillatory (WENO) schemes. (iii) For problems with material interfaces, the quasi‐conservative approach can be realized using characteristic‐wise flux‐split based finite difference WENO schemes if nonlinear WENO schemes in genuinely nonlinear characteristic fields can be guaranteed to be the same and the decomposition equation representing material interfaces is discretized properly. Copyright © 2015 John Wiley & Sons, Ltd.     

Numerical experiments with several variant WENO schemes for the Euler equations

Numerical experiments with several variants of the original weighted essentially non‐oscillatory (WENO) schemes (J. Comput. Phys. 1996; 126 :202–228) including anti‐diffusive flux corrections, the mapped WENO scheme, and modified smoothness indicator are tested for the Euler equations. The TVD Runge–Kutta explicit time‐integrating scheme is adopted for unsteady flow computations and lower–upper symmetric‐Gauss–Seidel (LU‐SGS) implicit method is employed for the computation of steady‐state solutions. A numerical flux of the variant WENO scheme in flux limiter form is presented, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of low‐order schemes. Computations of unsteady oblique shock wave diffraction over a wedge and steady transonic flows over NACA 0012 and RAE 2822 airfoils are presented to test and compare the methods. Various aspects of the variant WENO methods including contact discontinuity sharpening and steady‐state convergence rate are examined. By using the WENO scheme with anti‐diffusive flux corrections, the present solutions indicate that good convergence rate can be achieved and high‐order accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Copyright © 2008 John Wiley & Sons, Ltd.     

A high‐resolution hybrid scheme for hyperbolic conservation laws

A new hybrid scheme is proposed, which combines the improved third‐order weighted essentially non‐oscillatory (WENO) scheme presented in this paper with a fourth‐order central scheme by a novel switch. Two major steps have been gone through for the construction of a high‐performance and stable hybrid scheme. Firstly, to enhance the WENO part of the hybrid scheme, a new reference smoothness indicator has been devised, which, combined with the nonlinear weighting procedure of WENO‐Z, can drive the third‐order WENO toward the optimal linear scheme faster. Secondly, to improve the hybridization with the central scheme, a hyperbolic tangent hybridization switch and its efficient polynomial counterpart are devised, with which we are able to fix the threshold value introduced by the hybridization. The new hybrid scheme is thus formulated, and a set of benchmark problems have been tested to verify the performance enhancement. Numerical results demonstrate that the new hybrid scheme achieves excellent performance in resolving complex flow features, even compared with the fifth‐order classical WENO scheme and WENO‐Z scheme. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved third‐order weighted essentially nonoscillatory schemes with new smoothness indicators

In this article, we present two improved third‐order weighted essentially nonoscillatory (WENO) schemes for recovering their design‐order near first‐order critical points. The schemes are constructed in the framework of third‐order WENO‐Z scheme. Two new global smoothness indicators, τ_L3 and τ_L4, are devised by a nonlinear combination of local smoothness indicators (IS_k) and reference values (IS_G) based on Lagrangian interpolation polynomial. The performances of the proposed schemes are evaluated on several numerical tests governed by one‐dimensional linear advection equation or one‐ and two‐dimensional Euler equations. Numerical results indicate that the presented schemes provide less dissipation and higher resolution than the original WENO3‐JS and subsequent WENO3‐N scheme.     

An adaptive multilevel wavelet framework for scale‐selective WENO reconstruction schemes

We put forth a dynamic computing framework for scale‐selective adaptation of weighted essential nonoscillatory (WENO) schemes for the simulation of hyperbolic conservation laws exhibiting strong discontinuities. A multilevel wavelet‐based multiresolution procedure, embedded in a conservative finite volume formulation, is used for a twofold purpose. (i) a dynamic grid adaptation of the solution field for redistributing grid points optimally (in some sense) according to the underlying flow structures, and (ii) a dynamic minimization of the in built artificial dissipation of WENO schemes. Taking advantage of the structure detection properties of this multiresolution algorithm, the nonlinear weights of the conventional WENO implementation are selectively modified to ensure lower dissipation in smoother areas. This modification is implemented through a linear transition from the fifth‐order upwind stencil at the coarsest regions of the adaptive grid to a fully nonlinear fifth‐order WENO scheme at areas of high irregularity. Therefore, our computing algorithm consists of a dynamic grid adaptation strategy, a scale‐selective state reconstruction, a conservative flux calculation, and a total variation diminishing Runge‐Kutta scheme for time advancement. Results are presented for canonical examples drawn from the inviscid Burgers, shallow water, Euler, and magnetohydrodynamic equations. Our findings represent a novel direction for providing a scale‐selective dissipation process without a compromise on shock capturing behavior for conservation laws, which would be a strong contender for dynamic implicit large eddy simulation approaches.