首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 23 毫秒
1.
Accurate computations of two‐dimensional turbulent hypersonic shock–shock interactions that arise when single and dual shocks impinge on the bow shock in front of a cylinder are presented. The simulation methods used are a class of lower–upper symmetric‐Gauss–Seidel implicit anti‐diffusive weighted essentially non‐oscillatory (WENO) schemes for solving the compressible Navier–Stokes equations with Spalart–Allmaras one‐equation turbulence model. A numerical flux of WENO scheme with anti‐diffusive flux correction is adopted, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of first‐order dissipative methods. Experimental flow fields of type IV shock–shock interactions with single and dual incident shocks by Wieting are computed. By using the WENO scheme with anti‐diffusive flux corrections, the present solution indicates that good accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Computed surface pressure distribution and heat transfer rate are also compared with experimental data and other computational results and good agreement is found. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

2.
This paper reports numerical convergence study for simulations of steady shock‐induced combustion problems with high‐resolution shock‐capturing schemes. Five typical schemes are used: the Roe flux‐based monotone upstream‐centered scheme for conservation laws (MUSCL) and weighted essentially non‐oscillatory (WENO) schemes, the Lax–Friedrichs splitting‐based non‐oscillatory no‐free parameter dissipative (NND) and WENO schemes, and the Harten–Yee upwind total variation diminishing (TVD) scheme. These schemes are implemented with the finite volume discretization on structured quadrilateral meshes in dimension‐by‐dimension way and the lower–upper symmetric Gauss–Seidel (LU–SGS) relaxation method for solving the axisymmetric multispecies reactive Navier–Stokes equations. Comparison of iterative convergence between different schemes has been made using supersonic combustion flows around a spherical projectile with Mach numbers M = 3.55 and 6.46 and a ram accelerator with M = 6.7. These test cases were regarded as steady combustion problems in literature. Calculations on gradually refined meshes show that the second‐order NND, MUSCL, and TVD schemes can converge well to steady states from coarse through fine meshes for M = 3.55 case in which shock and combustion fronts are separate, whereas the (nominally) fifth‐order WENO schemes can only converge to some residual level. More interestingly, the numerical results show that all the schemes do not converge to steady‐state solutions for M = 6.46 in the spherical projectile and M = 6.7 in the ram accelerator cases on fine meshes although they all converge on coarser meshes or on fine meshes without chemical reactions. The result is based on the particular preconditioner of LU–SGS scheme. Possible reasons for the nonconvergence in reactive flow simulation are discussed.Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

3.
Hybrid schemes are very efficient for complex compressible flow simulation. However, for most existing hybrid schemes in literature, empirical problem‐dependent parameters are always needed to detect shock waves and hence greatly decrease the robustness and accuracy of the hybrid scheme. In this paper, based on the nonlinear weights of the weighted essentially non‐oscillatory (WENO) scheme, a novel weighting switch function is proposed. This function approaches 1 with high‐order accuracy in smooth regions and 0 near discontinuities. Then, with the new weighting switch function, a seventh‐order hybrid compact‐reconstruction WENO scheme (HCCS) is developed. The new hybrid scheme uses the same stencil as the fifth‐order WENO scheme, and it has seventh‐order accuracy in smooth regions even at critical points. Numerical tests are presented to demonstrate the accuracy and robustness of both the switch function and HCCS. Comparisons also reveal that HCCS has lower dissipation and less computational cost than the seventh‐order WENO scheme. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

4.
寻找一种能够准确计算以涡为主要特征的复杂流场和克服尾迹耗散问题的数值方法,一直是旋翼空气动力学研究的热点和难点。本文发展了一种基于高阶迎风格式计算悬停旋翼无粘流场的隐式数值方法。无粘通量采用Roe通量差分分裂格式,为提高精度,使用五阶WENO格式进行左右状态插值,并与MUSCL插值进行比较。为提高收敛到定常解的效率,时间推进采用LU-SGS隐式方法。用该方法对一跨声速悬停旋翼无粘流场进行了数值计算,数值结果表明WENO-Roe的激波分辨率高于MUSCL-Roe,体现出了格式精度的提高对计算结果的改善,LU-SGS隐式方法的计算效率比5步Runge-Kutta显式方法的高。  相似文献   

5.
In this article, we present an improved third-order finite difference weighted essentially nonoscillatory (WENO) scheme to promote the order of convergence at critical points for the hyperbolic conservation laws. The improved WENO scheme is an extension of WENO-ZQ scheme. However, the global smoothness indicator has a little different from WENO-ZQ scheme. In this follow-up article, a convex combination of a second-degree polynomial with two linear polynomials in a traditional WENO fashion is used to compute the numerical flux at cell boundary. Although the same three-point information is adopted by the improved third-order WENO scheme, the truncation errors are smaller than some other third-order WENO schemes in L and L2 norms. Especially, the convergence order is not declined at critical points, where the first and second derivatives vanish but not the third derivative. At last, the behavior of improved scheme is proved on a variety of one- and two-dimensional standard numerical examples. Numerical results demonstrate that the proposed scheme gives better performance in comparison with other third-order WENO schemes.  相似文献   

6.
加权型紧致格式与加权本质无波动格式的比较   总被引:3,自引:3,他引:0  
张树海 《力学学报》2016,48(2):336-347
线性紧致格式和加权本质无波动格式是两种典型的高阶精度数值格式,它们各有优缺点.线性紧致格式在具有高阶精度的同时,格式的分辨率也比较高,耗散低,是计算多尺度流场结构的较好格式,但是不能计算具有强激波的流场.加权本质无波动格式是一种高阶精度捕捉激波格式,鲁棒性好,但耗散比较高,分辨率也不理想.近年来,在莱勒的线性紧致格式基础上,采用加权本质无波动格式捕捉激波思想,发展了一系列加权型紧致格式.本文较全面地比较了加权型紧致格式和加权本质无波动格式,包括构造方法、鲁棒性、分辨率、耗散特性、收敛特性以及并行计算效率.结果表明,现有的加权型紧致格式基本保持了加权本质无波动格式的性质,对于气动力等宏观量的计算,比加权本质无波动格式没有明显的优势.   相似文献   

7.
This work describes the implementation and analysis of high‐order accurate schemes applied to high‐speed flows on unstructured grids. The class of essentially non‐oscillatory schemes (ENO), that includes weighted ENO schemes (WENO), is discussed in the paper with regard to the implementation of third‐ and fourth‐order accurate methods. The entire reconstruction process of ENO and WENO schemes is described with emphasis on the stencil selection algorithms. The stencils can be composed by control volumes with any number of edges, e.g. triangles, quadrilaterals and hybrid meshes. In the paper, ENO and WENO schemes are implemented for the solution of the dimensionless, 2‐D Euler equations in a cell centred finite volume context. High‐order flux integration is achieved using Gaussian quadratures. An approximate Riemann solver is used to evaluate the fluxes on the interfaces of the control volumes and a TVD Runge–Kutta scheme provides the time integration of the equations. Such a coupling of all these numerical tools, together with the high‐order interpolation of primitive variables provided by ENO and WENO schemes, leads to the desired order of accuracy expected in the solutions. An adaptive mesh refinement technique provides better resolution in regions with strong flowfield gradients. Results for high‐speed flow simulations are presented with the objective of assessing the implemented capability. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

8.
In this paper we proposed the kinetic framework based fifth-order adaptive finite difference WENO schemes abbreviated as WENO-AO-K schemes to solve the compressible Euler equations, which are quasi-linear hyperbolic equations that can admit discontinuous solutions like shock and contact waves. The formulation of the proposed schemes is based on the kinetic theory where one can recover the Euler equations by applying a suitable moment method strategy to the Boltzmann equation. The kinetic flux vector splitting strategy is used in WENO-AO framework, which produces the computationally expensive error and exponential functions. Thus, to reduce the computational cost, a physically more relevant peculiar velocity based splitting strategy is used, which is more efficient than the kinetic flux vector splitting. High order of accuracy in time is achieved using the third-order total variation diminishing Runge–Kutta (TVD-RK) scheme. Several one- and two-dimensional test cases are solved for the compressible Euler equations using the proposed fifth-order WENO-AO-K schemes and the results are compared with conventional WENO-AO scheme. Proposed schemes capture the complex flow features in a smooth region accurately, and discontinuity is also well resolved. Error analysis of the proposed schemes shows optimal convergence rates in various norms.  相似文献   

9.
In this article, we present two improved third‐order weighted essentially nonoscillatory (WENO) schemes for recovering their design‐order near first‐order critical points. The schemes are constructed in the framework of third‐order WENO‐Z scheme. Two new global smoothness indicators, τL3 and τL4, are devised by a nonlinear combination of local smoothness indicators (ISk) and reference values (ISG) based on Lagrangian interpolation polynomial. The performances of the proposed schemes are evaluated on several numerical tests governed by one‐dimensional linear advection equation or one‐ and two‐dimensional Euler equations. Numerical results indicate that the presented schemes provide less dissipation and higher resolution than the original WENO3‐JS and subsequent WENO3‐N scheme.  相似文献   

10.
A new third‐order WENO scheme is proposed to achieve the desired order of convergence at the critical points for scalar hyperbolic equations. A new reference smoothness indicator is introduced, which satisfies the sufficient condition on the weights for the third‐order convergence. Following the truncation error analysis, we have shown that the proposed scheme achieves the desired order accurate for smooth solutions with arbitrary number of vanishing derivatives if the parameter ε satisfies certain conditions. We have made a comparative study of the proposed scheme with the existing schemes such as WENO‐JS, WENO‐Z, and WENO‐N3 through different numerical examples. The result shows that the proposed scheme (WENO‐MN3) achieves better performance than these schemes.  相似文献   

11.
This paper presents a family of High‐order finite volume schemes applicable on unstructured grids. The k‐exact reconstruction is performed on every control volume as the primary reconstruction. On a cell of interest, besides the primary reconstruction, additional candidate reconstruction polynomials are provided by means of very simple and efficient ‘secondary’ reconstructions. The weighted average procedure of the WENO scheme is then applied to the primary and secondary reconstructions to ensure the shock‐capturing capability of the scheme. This procedure combines the simplicity of the k‐exact reconstruction with the robustness of the WENO schemes and represents a systematic and unified way to construct High‐order accurate shock capturing schemes. To further improve the efficiency, an efficient problem‐independent shock detector is introduced. Several test cases are presented to demonstrate the accuracy and non‐oscillation property of the proposed schemes. The results show that the proposed schemes can predict the smooth solutions with uniformly High‐order accuracy and can capture the shock waves and contact discontinuities in high resolution. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

12.
Three-dimensional dynamic gas–liquid flow simulations that accurately track the phase interface are numerically challenging. This article presents a numerical study of the performance of the level-set phase–interface tracking method when combined with extremely high order (7th to 11th) weighted essentially non-oscillatory (WENO) advection schemes for gas–liquid free surface flows. Comparisons between simulation results and prior benchmark results suggest that such a combination of methods can be satisfactorily applied to the level-set and Navier-Stokes equations for free surface flow simulations when volume conservation is enforced at every time step, and minor numerical oscillations are suppressed through use of an artificial viscosity term. In particular, simulations of solid body rotation, the unsteady flow following an ideal dam break, tank sloshing, and the rise of a single bubble all agree with analytical or experimental results to within ± 3.12% when the level-set method is combined with an 11th order WENO scheme. Furthermore, use of an 11th order WENO advection scheme actually has a computational cost advantage because, for the same accuracy, it can be used on a coarser grid when compared with a more-common second-order advection scheme; computational savings of up to 87% are possible.  相似文献   

13.
The blood flow model in arteries admits the steady state solutions, for which the flux gradient is nonzero, and is exactly balanced by the source term. In this paper, by means of hydrostatic reconstruction, we construct a high order discontinuous Galerkin method, which exactly preserves the dead‐man steady state, which is characterized by a discharge equal to zero (analogue to hydrostatic equilibrium). Moreover, the method maintains genuine high order of accuracy. Subsequently, we apply the key idea to finite volume weighted essentially non‐oscillatory schemes and obtain a well‐balanced finite volume weighted essentially non‐oscillatory scheme. Extensive numerical experiments are performed to verify the well‐balanced property, high order accuracy, as well as good resolution for smooth and discontinuous solutions.  相似文献   

14.
In this paper, we propose a high‐order finite volume hybrid kinetic Weighted Essentially Non‐Oscillatory (WENO) scheme for inviscid and viscous flows. Based on the WENO reconstruction technique, a hybrid kinetic numerical flux is introduced for the present method, which includes the mechanisms of both the free transfer and the collision of gas molecules. The collisionless free transfer part of the hybrid numerical flux is constructed from the conventional kinetic flux vector splitting treatment, and the collision contribution is considered by constructing an equilibrium gas state and calculating the corresponding numerical flux at the cell interface. The total variation diminishing Runge–Kutta methods are used for the temporal integration. The high‐order accuracy and good shock‐capturing capability of the proposed hybrid kinetic WENO scheme are validated by many numerical examples in one‐dimensional and two‐dimensional cases. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

15.
双曲性守恒方程组采用高阶、高分辨率的WENO格式时有两类分裂方法,即逐点分裂和特征分裂。本文基于后者,对特征分裂重构时强间断和接触间断位置出现的振荡情况进行研究,对重构变量加以改进,发现改进后的WENO格式克服了间断处的振荡,然后以LU-SGS为子迭代的双时间步法求解Euler方程,选用一维Sod、二维前台阶和双马赫反射算例,并与Roe格式计算结果进行对比,发现WENO格式分辨率更高,耗散更小。  相似文献   

16.
The local smoothness indicators play an important role in the performance of a weighted essentially nonoscillatory (WENO) scheme. Due to having only 2 points available on each substencil, the local smoothness indicators calculated by conventional methods make the third‐order WENO scheme too dissipative. In this paper, we propose a different method to calculate the indicators by using all the 3 points on the global stencil of the third‐order WENO scheme. The numerical results demonstrate that the WENO scheme with the new indicators has less dissipation and better resolution than the conventional third‐order WENO scheme of Jiang and Shu for both smooth and discontinuous solutions.  相似文献   

17.
The blood flow model maintains the steady‐state solutions, in which the flux gradients are non‐zero but exactly balanced by the source term. In this paper, we design high order finite difference weighted essentially non‐oscillatory (WENO) schemes to this model with such well‐balanced property and at the same time keeping genuine high order accuracy. Rigorous theoretical analysis as well as extensive numerical results all indicate that the resulting schemes verify high order accuracy, maintain the well‐balanced property, and keep good resolution for smooth and discontinuous solutions. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

18.
Problems in the characteristic‐wise flux‐split based finite difference method when compressible flows with contact discontinuities or material interfaces are computed were presented and analyzed. The current analysis showed the following: (i) Even with the local characteristic decomposition technique, numerical errors could be caused by point‐wise flux vector splitting (FVS) methods, such as the Steger–Warming FVS or the van Leer FVS. Therefore, the Lax–Friedrichs type FVS method is required. (ii) If the isobars of a material are vertical lines, the combination of using the local characteristic decomposition and the global Lax–Friedrichs FVS can avoid velocity and pressure oscillations of contact discontinuities in this material for weighted essentially non‐oscillatory (WENO) schemes. (iii) For problems with material interfaces, the quasi‐conservative approach can be realized using characteristic‐wise flux‐split based finite difference WENO schemes if nonlinear WENO schemes in genuinely nonlinear characteristic fields can be guaranteed to be the same and the decomposition equation representing material interfaces is discretized properly. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

19.
In this article, we have devised a new reference smoothness indicator for third‐order weighted essentially non‐oscillatory (WENO) scheme to achieve desired order of convergence at critical points. In the context of the weighted essentially non‐oscillatory scheme, reference smoothness indicator is constructed in such a way that it satisfies the sufficient condition on the weights for the third‐order convergence. The goal is to construct a reference smoothness indicator such that the resulted scheme have to achieve the required order of accuracy even if the first two derivatives vanish but not the third derivative. The construction of such reference smoothness indicator is not possible through a linear combination of local smoothness indicators only. We have proposed a reference smoothness indicator to be of the fourth order of accuracy on three‐point stencil that contains the linear combination of the first derivative information of the local and global stencils. The performance enhancement of the WENO scheme through this reference smoothness indicator is verified through the standard numerical experiments. Numerical results indicate that the new scheme provides better results in comparison with the earlier third‐order WENO schemes like WENO‐JS and WENO‐Z. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

20.
This paper focuses on the results of the linear stability analysis of the finite‐difference weighted essentially non‐oscillatory (WENO) schemes with optimal weights. The standard WENO schemes between the third and 11th order, the order‐optimised WENO schemes of the sixth and eighth order and the bandwidth‐optimised WENO schemes of the third and fourth order are considered. Several explicit Runge–Kutta schemes including the recently published strong stability‐preserving explicit Runge–Kutta schemes are considered for time discretisation. The stability limits as well as dissipation and dispersion properties dependent on the Courant–Friedrichs–Lewy number are presented for a hyperbolic model equation. The different combinations of space and time discretisation schemes are compared in terms of their accuracy and efficiency. For a parabolic model equation, the viscous term is discretised with high‐order central differences. The stability limits for the parabolic problem are presented as well. Numerical results of linear test cases are shown. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号