Kinetics and mechanism of catalytic decomposition and oxidation of chlorine dioxide by the hypochlorite ion

The oxidation of ClO(2) by OCl(-)is first order with respect to both reactants in the neutral to alkaline pH range: -d[ClO(2)]/dt = 2k(OCl)[ClO(2)][OCl(-)]. The rate constant (T = 298 K, mu = 1.0 M NaClO(4)) and activation parameters are k(OCl) = 0.91 +/- 0.02 M(-1) s(-1), DeltaH = 66.5 +/- 0.9 kJ/mol, and DeltaS(++) = -22.3 +/- 2.9 J/(mol K). In alkaline solution, pH > 9, the primary products of the reaction are the chlorite and chlorate ions and consumption of the hypochlorite ion is not observed. The hypochlorite ion is consumed in increasing amounts, and the production of the chlorite ion ceases when the pH is decreased. The stoichiometry is kinetically controlled, and the reactants/products ratios are determined by the relative rates of the production and consumption of the chlorite ion in the ClO(2)/OCl(-) and HOCl/ClO(2)(-) reactions, respectively.     

Integration of catalysis and analysis is the key: rapid and precise investigation of the catalytic asymmetric Gosteli-Claisen rearrangement

The kinetics of the Cu(II)(bisoxazoline)-catalyzed diastereo- and enantioselective Gosteli-Claisen rearrangement of 2-alkoxycarbonyl-substituted allyl vinyl ethers has been investigated by enantioselective on-column reaction gas chromatography (ocRGC). Enantioselective ocRGC integrates (stereoselective) catalysis and enantioselective chromatography in a single microcapillary, which is installed in a GC-MS for direct analysis of conversion and selectivity. Thus, this technique allows direct differentiation of thermal and stereoselectively catalyzed reaction pathways and determination of activation parameters and selectivities of the individual reaction pathways starting from stereoisomeric reactants with high precision. Two modes of operation of enantioselective ocRGC are presented to investigate noncatalyzed, i.e., conversion of isopropyl-2-(allyloxy)but-2Z-enoate 1 to isopropyl-3R,S-methyl-2-oxy-hex-5-enoate (±)-2 and the [Cu{(R,R)-Ph-box}](SbF(6))(2)-catalyzed Gosteli-Claisen rearrangement, i.e., conversion of isopropyl-2-(but-2'E-en-1-yloxy)but-2Z-enoate (E,Z)-3 to isopropyl-3S,4S-dimethyl-2-oxy-hex-5-enoate 4b. Eyring activation parameters have been determined by temperature-dependent measurements: Uncatalyzed rearrangement of 1 to (±)-2 gives ΔG(?) (298 K) = 114.1 ± 0.2 kJ·mol(-1), ΔH(?) = 101.1 ± 1.9 kJ·mol(-1), and ΔS(?) = -44 ± 5 J·(K·mol)(-1), and catalyzed rearrangement of (E,Z)-3 to 4b gives ΔG(?)(298 K) = 101.1 ± 0.3 kJ·mol(-1), ΔH(?) = 106.1 ± 6.6 kJ·mol(-1), and ΔS(?) = 17 ± 19 J·(K·mol)(-1).     

NMR study of ligand exchange and electron self-exchange between oxo-centered trinuclear clusters [Fe3(μ3-O)(μ-O2CR)6(4-R'py)3](+/0)

The syntheses, single crystal X-ray structures, and magnetic properties of the homometallic μ?-oxo trinuclear clusters [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](ClO?) (1) and [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)?](NO?) (2) are reported (Ad = adamantane). The persistence of the trinuclear structure within 1 and 2 in CD?Cl? and C?D?Cl? solutions in the temperature range 190-390 K is demonstrated by 1H NMR. An equilibrium between the mixed pyridine clusters [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)(3-x)(4-Phpy)(x)](NO?) (x = 0, 1, 2, 3) with a close to statistical distribution of these species is observed in CD?Cl? solutions. Variable-temperature NMR line-broadening made it possible to quantify the coordinated/free 4-Rpy exchanges at the iron centers of 1 and 2: k(ex)2?? = 6.5 ± 1.3 × 10?1 s?1, ΔH(?) = 89.47 ± 2 kJ mol?1, and ΔS(?) = +51.8 ± 6 J K?1 mol?1 for 1 and k(ex)2?? = 3.4 ± 0.5 × 10?1 s?1, ΔH(?) = 91.13 ± 2 kJ mol?1, and ΔS(?) = +51.9 ± 5 J K?1 mol?1 for 2. A limiting D mechanism is assigned for these ligand exchange reactions on the basis of first-order rate laws and positive and large entropies of activation. The exchange rates are 4 orders of magnitude slower than those observed for the ligand exchange on the reduced heterovalent cluster [Fe(III)?Fe(II)(μ?-O)(μ-O?CCH?)?(4-Phpy)?] (3). In 3, the intramolecular Fe(III)/Fe(II) electron exchange is too fast to be observed. At low temperatures, the 1/3 intermolecular second-order electron self-exchange reaction is faster than the 4-Phpy ligand exchange reactions on these two clusters, suggesting an outer-sphere mechanism: k?2?? = 72.4 ± 1.0 × 103 M?1 s?1, ΔH(?) = 18.18 ± 0.3 kJ mol?1, and ΔS(?) = -90.88 ± 1.0 J K?1 mol?1. The [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](+/0) electron self-exchange reaction is compared with the more than 3 orders of magnitude faster [Ru?(μ?-O)(μ-O?CCH?)?(py)?](+/0) self-exchange reaction (ΔΔG(exptl)(?298) = 18.2 kJ mol?1). The theoretical estimated self-exchange rate constants for both processes compare reasonably well with the experimental values. The equilibrium constant for the formation of the precursor to the electron-transfer and the free energy of activation contribution for the solvent reorganization to reach the electron transfer step are taken to be the same for both redox couples. The larger ΔG(exptl)(?298) for the 1/3 iron self-exchange is attributed to the larger (11.1 kJ mol?1) inner-sphere reorganization energy of the 1 and 3 iron clusters in addition to a supplementary energy (6.1 kJ mol?1) which arises as a result of the fact that each encounter is not electron-transfer spin-allowed for the iron redox couple.     

Kinetic study of the thermal inactivation of glucose oxidase in the presence of denaturant and stabilizer by means of bioelectrocatalysis method

The thermal inactivation of glucose oxidase (GOD) in aqueous solution has been studied by the electrochemical method to follow the bioelectrocatalytic current due to the oxidation of glucose by GOD. Exponential time-dependent decrease in bioelectrocatalytic current, that is, the decrease in the enzymatic activity of GOD, was observed at given temperatures to determine the rate constant (k) of a simple inactivation process: GOD (active) → GOD (inactive). The ln[k] vs. T(-1) plots gave straight lines with all solution conditions tested, so that the resulting Arrhenius activation parameters including ΔH(?) and ΔS(?) can be compared with each other. In the 50 mmol/L phosphate buffer at 70°C, k was determined to be (6.6 ± 1.6)× 10(-4) s(-1), and ΔH(?) and ΔS(?) were calculated to be 202 ± 13 kJ mol(-1) and 282 ± 39 J K(-1) mol(-1), respectively. By addition of 3 mol/L guanidine hydrochloride, the k was increased to (4.7 ± 0.6)× 10(-3) s(-1), indicating that the denaturant accelerates the thermal inactivation. In this case, ΔH(?) was significantly reduced. By addition of 1 g/L ε-poly-L-lysine, which may adsorb onto the GOD surface to reduce the local disorder, k was decreased to (1.8 ± 0.6)× 10(-4) s(-1). In this case, ΔS(?) was reduced but ΔH(?) was not decreased much. This can be used as an important indication for selection of the enzyme stabilizer in solution.     

The oxidative degradation of dibenzoazepine derivatives by cerium(IV) complexes in acidic sulfate media

The kinetics of the oxidation of imipramine and desipramine using cerium(IV) complexes were studied in the presence of a large excess of azepine derivative (TCA) in acidic sulfate media using UV-Vis spectroscopy. The reaction proceeds via dibenzoazepine radical formation, identified by EPR measurements. The kinetics of the first degradation step were studied independently of the further slower degradation reactions. Linear dependences, with zero intercept, of the pseudo-first-order rate constants (k(obs)) on [TCA] were established for both dibenzoazepine radical formation processes. Rates of reactions decreased with increasing concentration of the H(+) ion indicating that cerium(IV) as well as both reductants exist in an equilibrium with their protolytic forms. The activation parameters for the degradation of dibenzoazepine derivatives in the first oxidation stage were as follows: ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 8 J K(-1) mol(-1) for imipramine and ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 6 J K(-1) mol(-1) for desipramine, respectively. Imipramine and desipramine radicals dimerized leading to an intermediate radical dimer, which decayed in a first-order consecutive decay process. These two further reactions proceed with rates which are characterized by non-linear dependences of the pseudo-first-order rate constants (k(obs)) on [TCA]. The degradation reaction of the intermediate radical dimer leads to an uncharged dimer as a final product. Mechanistic consequences of all the results are discussed.     

Oxidation of a guanine derivative coordinated to a Pt(IV) complex initiated by intermolecular nucleophilic attacks

In this study we report that fac-[Pt(IV)(dach)(9-EtG)Cl(3)](+) (dach = d,l-1,2-diaminocyclohexane, 9-EtG = 9-ethylguanine) in high pH (pH 12) or phosphate solution (pH 7.4) produces 8-oxo-9-EtG and Pt(II) species. The reaction in H(2)(18)O revealed that the oxygen atom in hydroxide or phosphate ends up at the C8 position of 8-oxo-G. The kinetics of the redox reaction was first order with respect to both Pt(IV)-G and free nucleophiles (OH(-) and phosphate). The oxidation of G initiated by hydroxide was approximately 30～50 times faster than by phosphate in 100 mM NaCl solutions. The large entropy of activation of OH(-1) (ΔS(?) = 26.6 ± 4.3 J mol(-1) K(-1)) due to the smaller size of OH(-) is interpreted to be responsible for the faster kinetics compared to phosphate (ΔS(?) = -195.5 ± 11.1 J mol(-1) K(-1)). The enthalpy of activation for phosphate reaction is more favorable relative to the OH(-) reaction (ΔH(?) = 35.4 ± 3.5 kJ mol(-1) for phosphate vs. 96.6 ± 11.4 kJ mol(-1) for OH(-1)). The kinetic isotope effect of H8 was determined to be 7.2 ± 0.2. The rate law, kinetic isotope effect, and isotopic labeling are consistent with a mechanism involving proton ionization at the C8 position as the rate determining step followed by two-electron transfer from G to Pt(IV).     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Chlorine dioxide-facilitated oxidation of the azo dye amaranth

The oxidation reaction of amaranth (trisodium 2-hydroxy-1-(4-sulfonato-1-naphthylazo)naphthalene-3,6-disulfonate or AM(-)) by chlorine dioxide (ClO(2)) in aqueous conditions was investigated in detail. The major reaction products immediately after decolorization of AM(-) were 1,2-naphthoquinone disulfonate sodium salt and 1,4-napthalenedione. The reaction had first-order dependence on both AM(-) and ClO(2). The rate-limiting step involved the reaction between AM(-) and OH(-) ions. The role of hydroxide ion as a catalyst was established. The second-order rate constant increased with pH, from (19.8 ± 0.9) M(-1) s(-1) at pH 7.0, (97.1 ± 2.3) M(-1) s(-1) at pH 8.0 to (132.5 ± 2.8) M(-1) s(-1) at pH 9.0. In the pH range of 6.0-7.5, the catalytic constant for OH(-) ion was 4.0 × 10(9) M(-2) s(-1). The energy and entropy of activation values for the reaction were 50.0 kJ mol(-1) and -658.7 J K(-1) mol(-1), respectively. A probable reaction mechanism was elucidated and was validated by simulations.     

Preparation and characterization of manganese(IV) in aqueous acetic acid

Mn(IV) acetate was generated in acetic acid solutions and characterized by UV-vis spectroscopy, magnetic susceptibility, and chemical reactivity. All of the data are consistent with a mononuclear manganese(IV) species. Oxidation of several substrates was studied in glacial acetic acid (HOAc) and in 95:5 HOAc-H(2)O. The reaction with excess Mn(OAc)(2) produces Mn(OAc)(3) quantitatively with mixed second-order kinetics, k (25.0 °C) = 110 ± 4 M(-1) s(-1) in glacial acetic acid, and 149 ± 3 M(-1) s(-1) in 95% AcOH, ΔH(?) = 55.0 ± 1.2 kJ mol(-1), ΔS(?) = -18.9 ± 4.1 J mol(-1) K(-1). Sodium bromide is oxidized to bromine with mixed second order kinetics in glacial acetic acid, k = 220 ± 3 M(-1) s(-1) at 25 °C. In 95% HOAc, saturation kinetics were observed.     

Rapid C-H bond activation by a monocopper(III)-hydroxide complex

One-electron oxidation of the tetragonal Cu(II) complex [Bu(4)N][LCuOH] at -80 °C generated the reactive intermediate LCuOH, which was shown to be a Cu(III) complex on the basis of spectroscopy and theory (L = N,N'-bis(2,6-diisopropylphenyl)-2,6-pyridinedicarboxamide). The complex LCuOH reacts with dihydroanthracene to yield anthracene and the Cu(II) complex LCu(OH(2)). Kinetic studies showed that the reaction occurs via H-atom abstraction via a second-order rate law at high rates (cf. k = 1.1(1) M(-1) s(-1) at -80 °C, ΔH(?) = 5.4(2) kcal mol(-1), ΔS(?) = -30(2) eu) and with very large kinetic isotope effects (cf. k(H)/k(D) = 44 at -70 °C). The findings suggest that a Cu(III)-OH moiety is a viable reactant in oxidation catalysis.     

A general strategy for the experimental study of the thermochemistry of protic ionic liquids: enthalpy of formation and vaporisation of 1-methylimidazolium ethanoate

A general strategy to determine enthalpies of formation of protic ionic liquids, based solely on enthalpy of solution measurements, was conceived and tested for 1-methylimidazolium ethanoate, leading to Δ(f)H°(m){[Hmim][O(2)CCH(3)], 1} = -(425.7 ± 1.2) kJ mol(-1). This result in conjunction with the enthalpy of formation of gaseous 1-methylimidazole (mim) proposed in this work, Δ(f)H°(m)(mim, g) = 126.5 ± 1.1 kJ mol(-1), and Δ(f)H°(m)(CH(3)COOH, g) taken from the literature, allowed the calculation of the enthalpy of the vaporisation process [Hmim][O(2)CCH(3)](l) → mim(g) + CH(3)COOH(g) as Δ(vap)H°(m){[Hmim][O(2)CCH(3)]} = 119.4 ± 3.0 kJ mol(-1). The agreement between this value and Δ(vap)H°(m){[Hmim][O(2)CCH(3)]} = 117.3 ± 0.5 kJ mol(-1), obtained for the direct vaporisation of [Hmim][O(2)CCH(3)], by Calvet-drop microcalorimetry, gives a good indication that, as previously suggested by Fourier transform ion cyclotron resonance mass spectrometry, Raman spectroscopy, and GC-MS experiments, the vaporisation of [Hmim][O(2)CCH(3)] essentially involves a proton transfer mechanism with formation of the two volatile neutral precursor molecules (mim and CH(3)COOH). Although being a low ionicity protic ionic liquid, [Hmim][O(2)CCH(3)] was chosen to validate the methodology proposed here, since its vaporisation mechanism has been unequivocally demonstrated by different methods and for different pressure ranges.     

Structural and mechanistic information on the nitrosation of model Fe(II) complexes containing a biomimetic S4N chelate

In order to provide insight into the reaction pathways of nitrogen oxide redox species with [Fe-S] models that may parallel those existing in biology, the reactivity of the iron-sulfur species, {[Fe(II)(S(4)NEt(2)N)]}(2) (1) and [Fe(II)(CH(3)CN)(S(4)NEt(2)N)] (2), where (S(4)NEt(2)N)(2-) = 2,6-bis(2-mercaptophenylthiomethyl)-4-diethylaminopyridine(2-), towards NO(+) (nitrosation) has been studied mechanistically in acetonitrile and compared with the corresponding reactions with NO (nitrosylation). For the nitrosation of 1, the reaction takes place in two steps that correspond to the nitrosation of the mononuclear (2) and dinuclear (1) complexes, respectively. For the corresponding carbonyl complex [Fe(II)(CO)(S(4)NEt(2)N)] (3), the nitrosation reaction occurs in a single step. The relative reactivity of the iron-sulfur species is approximately (1)/(2)/(3) = 1/20/10. Activation parameters for the nitrosation of 1 (ΔH(#) = 27 ± 1 kJ mol(-1), ΔS(#) = -111 ± 2 J K(-1) mol(-1), and ΔV(#) = -19 ± 2 cm(3) mol(-1)), 2 (ΔH(#) = 46 ± 2 kJ mol(-1), ΔS(#) = -22 ± 7 J K(-1) mol(-1), and ΔV(#) = -9.7 ± 0.4 cm(3) mol(-1)) and 3 (ΔH(#) = 38 ± 1 kJ mol(-1), ΔS(#) = -44 ± 4 J K(-1) mol(-1), and ΔV(#) = -7.8 ± 0.3 cm(3) mol(-1)) were determined from variable temperature and pressure studies. The significantly negative ΔS(#) and ΔV(#) values found for the nitrosation reactions are consistent with an associative mechanism. A comparative study of the reactivity of the iron-sulfur species 1 to 3 towards NO(+) and NO is presented.     

Photoelectron spectroscopy of anilinide and acidity of aniline

The photoelectron spectrum of the anilinide ion has been measured. The spectrum exhibits a vibrational progression of the CCC in-plane bending mode of the anilino radical in its electronic ground state. The observed fundamental frequency is 524 ± 10 cm(-1). The electron affinity (EA) of the radical is determined to be 1.607 ± 0.004 eV. The EA value is combined with the N-H bond dissociation energy of aniline in a negative ion thermochemical cycle to derive the deprotonation enthalpy of aniline at 0 K; Δ(acid)H(0)(PhHN-H) = 1535.4 ± 0.7 kJ mol(-1). Temperature corrections are made to obtain the corresponding value at 298 K and the gas-phase acidity; Δ(acid)H(298)(PhHN-H) = 1540.8 ± 1.0 kJ mol(-1) and Δ(acid)G(298)(PhHN-H) = 1509.2 ± 1.5 kJ mol(-1), respectively. The compatibility of this value in the acidity scale that is currently available is examined by utilizing the acidity of acetaldehyde as a reference.     

The kinetics of pentoxyl oxidation by hypochlorite ions

The kinetics of pentoxyl (I) oxidation in aqueous media under the action of hypochlorite ions was studied at pH 8.8 and 273–298 K. The order of the reaction with respect to both participants was found to be one. The temperature dependence of the reaction rate obeyed the Arrhenius law. The reaction activation parameters were found to be E _a=11.08 kJ/mol, ΔH ^≠=8.73 kJ/mol, ΔS ^≠=?200.70 J/(mol K), and ΔG ^≠=66.88 kJ/mol. Reaction stoichiometry was studied, the chemical characteristics of the process considered, and a mechanism of the oxidative transformation of I under the action of OCl^? suggested.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

Role of Fe(IV)-oxo intermediates in stoichiometric and catalytic oxidations mediated by iron pyridine-azamacrocycles

An iron(II) complex with a pyridine-containing 14-membered macrocyclic (PyMAC) ligand L1 (L1 = 2,7,12-trimethyl-3,7,11,17-tetra-azabicyclo[11.3.1]heptadeca-1(17),13,15-triene), 1, was prepared and characterized. Complex 1 contains low-spin iron(II) in a pseudo-octahedral geometry as determined by X-ray crystallography. Magnetic susceptibility measurements (298 K, Evans method) and M?ssbauer spectroscopy (90 K, δ = 0.50(2) mm/s, ΔE(Q) = 0.78(2) mm/s) confirmed that the low-spin configuration of Fe(II) is retained in liquid and frozen acetonitrile solutions. Cyclic voltammetry revealed a reversible one-electron oxidation/reduction of the iron center in 1, with E(1/2)(Fe(III)/Fe(II)) = 0.49 V vs Fc(+)/Fc, a value very similar to the half-wave potentials of related macrocyclic complexes. Complex 1 catalyzed the epoxidation of cyclooctene and other olefins with H(2)O(2). Low-temperature stopped-flow kinetic studies demonstrated the formation of an iron(IV)-oxo intermediate in the reaction of 1 with H(2)O(2) and concomitant partial ligand oxidation. A soluble iodine(V) oxidant, isopropyl 2-iodoxybenzoate, was found to be an excellent oxygen atom donor for generating Fe(IV)-oxo intermediates for additional spectroscopic (UV-vis in CH(3)CN: λ(max) = 705 nm, ε ≈ 240 M(-1) cm(-1); M?ssbauer: δ = 0.03(2) mm/s, ΔE(Q) = 2.00(2) mm/s) and kinetic studies. The electrophilic character of the (L1)Fe(IV)═O intermediate was established in rapid (k(2) = 26.5 M(-1) s(-1) for oxidation of PPh(3) at 0 °C), associative (ΔH(?) = 53 kJ/mol, ΔS(?) = -25 J/K mol) oxidation of substituted triarylphosphines (electron-donating substituents increased the reaction rate, with a negative value of Hammet's parameter ρ = -1.05). Similar double-mixing kinetic experiments demonstrated somewhat slower (k(2) = 0.17 M(-1) s(-1) at 0 °C), clean, second-order oxidation of cyclooctene into epoxide with preformed (L1)Fe(IV)═O that could be generated from (L1)Fe(II) and H(2)O(2) or isopropyl 2-iodoxybenzoate. Independently determined rates of ferryl(IV) formation and its subsequent reaction with cyclooctene confirmed that the Fe(IV)-oxo species, (L1)Fe(IV)═O, is a kinetically competent intermediate for cyclooctene epoxidation with H(2)O(2) at room temperature. Partial ligand oxidation of (L1)Fe(IV)═O occurs over time in oxidative media, reducing the oxidizing ability of the ferryl species; the macrocyclic nature of the ligand is retained, resulting in ferryl(IV) complexes with Schiff base PyMACs. NH-groups of the PyMAC ligand assist the oxygen atom transfer from ferryl(IV) intermediates to olefin substrates.     

果糖催化合成四氢苯并[b]吡喃衍生物:动力学和机理研究(英文)

Fructose was used as an efficient catalyst for three-component condensation reactions of aryl aldehydes,malononitrile,and dimedone in a mixture of EtOH and H_2O as green solvents.The advantages of this method are a short reaction time,high yields,low cost,easy accesses,and simple work-up.The mechanism of the synthesis of a derivative of 4H-tetrahydrobenzo[b]pyran was clarified using spectroscopic kinetic methods.The activation energy(Ea=65.34 kJ/mol)and related kinetic parameters(ΔG=69.14 kJ/mol,ΔS=20.99 J/(mol·K),andΔH=62.89 kJ/mol)were calculated,based on the effects of temperature,concentration,and solvent.The first step in the proposed mechanism was identified as the rate-determining step(k1),based on the steady-state approximation.     

Predicted thermochemistry and unimolecular kinetics of nitrous sulfide

The geometry of N(2)S was obtained at the CCSD(T)/aug-cc-pV(T + d)Z level of theory and energies with coupled-cluster single double triple (CCSD(T)) and basis sets up to aug-cc-pV(6 + d)Z. After correction for anharmonic zero-point energy, core-valence correlation, correlation up to CCSDT(Q) and relativistic effects, D(0) for the N-S bond is estimated as 71.9 kJ mol(-1), and the corresponding thermochemistry for N(2)S is Δ(f)H(0)(°)=205.4 kJ mol(-1) and Δ(f)H(298)(°)=202.6 kJ mol(-1) with an uncertainty of ±2.5 kJ mol(-1). Using CCSD(T)/aug-cc-pV(T + d) theory the minimum energy crossing point between singlet and triplet potential energy curves is found at r(N-N) ≈ 1.105 ? and r(N-S) ≈ 2.232 ?, with an energy 72 kJ mol(-1) above N(2) + S((3)P). Application of Troe's unimolecular formalism yields the low-pressure-limiting rate constant for dissociation of N(2)S k(0) = 7.6 × 10(-10) exp(-126 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 700-2000 K. The estimated uncertainty is a factor of 4 arising from unknown parameters for energy transfer between N(2)S and Ar or N(2) bath gas. The thermochemistry and kinetics were included in a mechanism for CO/H(2)/H(2)S oxidation and the conclusion is that little NO is produced via subsequent chemistry of NNS.     

Probing the nature of the Co(III) ion in corrins: a comparison of the thermodynamics and kinetics of the ligand substitution reactions of aquacyanocobyrinic acid heptamethyl ester and stable yellow aquacyanocobyrinic acid heptamethyl ester

Equilibrium constants (log K) for the substitution of coordinated H(2)O in aquacyanocobyrinic acid heptamethyl ester (aquacyanocobester, ACCbs) and stable yellow aquacyanocobyrinic acid heptamethyl ester (stable yellow aquacyanocobester, ACSYCbs), in which oxidation of the C5 carbon of the corrin interrupts the normal delocalized system of corrins, by ligands with soft (CN(-), SO(3)(2-), and S(2)O(3)(2-)) and hard (NO(2)(-) and N(3)(-)) donors have been determined. The ligands with a harder donor atom (N in N(3)(-) and NO(2)(-)) produce ΔH values that are more negative in their reactions with ACSYCbs than with ACCbs. If the donor atom is softer (C in CN(-) and S in SO(3)(2-)), then ΔH is less positive, or more negative, for reactions with ACCbs than with ACSYCbs. The softer metal in ACCbs has a preference for softer ligands and the harder metal in ACSYCbs for the harder ligands. A kinetics study in which CN(-) substitutes H(2)O on Co(III) shows that ACCbs is more labile than ACSYCbs; the second-order rate constant k(II) is between 4.6 (at 5 °C) and 2.6 (at 35 °C) times larger. ΔH(?) for the reaction of CN(-) with ACCbs is smaller by some 12 kJ mol(-1) than that for the reaction with ACSYCbs, consistent with an earlier transition state in which bonding between the softer metal of ACCbs and the ligand is greater than that of ACSYCbs with its harder metal. This difference in ΔH(?) makes ACCbs over 100 times more labile, although the effect is masked by a ΔS(?) value that is over 30 J K(-1) mol(-1) more negative. There is a significant increase in the inertness of Co(III) upon a decrease in the extent of conjugation of the corrin ligand. Modifying the electronic structure of the equatorial ligand in the cobalt corrins can modify the thermodynamics and kinetics of its reactions with exogenous ligands.     

Thermodynamic investigations of methyl tert-butyl ether and water mixtures

Interactions between methyl tert-butyl ether (MTBE) and water have been investigated by scanning calorimetry, isothermal titration calorimetry, densitometry, IR-spectroscopy, and gas chromatography. The solubilization of MTBE in water at 25 °C at infinite dilution has ΔH° = -17.0 ± 0.6 kJ mol(-1); ΔS° = -80 ± 2 J mol(-1) K(-1); ΔC(p) = +332 ± 15 J mol(-1) K(-1); ΔV° = -18 ± 2 cm(3) mol(-1). The signs of these thermodynamic functions are consistent with hydrophobic interactions. The occurrence of hydrophobic interaction is further substantiated as IR absorption spectra of MTBE-water mixtures show that MTBE strengthens the hydrogen bond network of water. Solubilization of MTBE in water is exothermic whereas solubilization of water in MTBE is endothermic with ΔH° = +5.3 ± 0.6 kJ mol(-1). The negative mixing volume is explained by a large negative contribution due to size differences between water and MTBE and by a positive contribution due to changes in the water structure around MTBE. Henry's law constants, K(H), were determined from vapor pressure measurements of mixtures equilibrated at different temperatures. A van't Hoff analysis of K(H) gave ΔH(H)° = 50 ± 1 kJ mol(-1) and ΔS(H)° = 166 ± 5 J mol(-1) K(-1) for the solution to gas transfer. MTBE is excluded from the ice phase water upon freezing MTBE-water mixtures.