网络安全产品研究

本文在研究了网络安全的国内外有关情况后对网络安全技术进行了探讨 ,介绍了一种简单而实用的网络安全产品 ,添补了这方面的空白 ,而且本文介绍的产品已经应用到了许多部门 ,为网络安全做出了贡献     

探究两个一次函数图像的对称规律

在学习了反比例函数后,老师带大家总结了两个点及函数图像的对称性.对于两个一次函数对称的情况,我自己进行了探索,发现了     

系统动力学在城市污水再生回用系统中的应用

用系统动力学方法研究了城市污水回用系统.首先分析了影响城市污水回用系统的诸多因素以及它们之间的相互关系,探讨了污水再生回用系统行为和结构的特点,确定了系统中因素之间的定量关系,建立了城市污水回用系统动力学(SD)模型,并介绍了模型的检验方法.同时给出了SD模型的具体应用实例,对西北地区的某一城市的污水回用进行了预测和分析,提出了符合该城市发展的污水回用方案.     

分数阶抛物方程控制系统最优控制的稳定性

本文研究了一类分数阶抛物方程的最优控制问题,主要讨论了其最优控制与最优值的稳定性.利用了凸方法获得了获得了这类问题最优控制的稳定性结果,并且推广了在参考文献[3]中的最优控制稳定性结论.     

分数阶Chen-like系统混沌性态分析及控制

提出了一类Chen-like系统,研究了该系统奇点稳定性、混沌等动力学性态.讨论了Chen-like系中参数与阶数对系统混沌性态的影响,并给出了Chem-like系统出现混沌性态的阶次范围.与分数阶Chen系统相比,系统出现混沌性态的阶次范围增大了.根据分数阶系统稳定性理论及线性反馈控制,对系统进行了混沌控制,得出了混沌系统在平衡点处的稳定性条件.数值模拟验证了理论分析的正确性.     

数学教辅书中的一类极值问题解答错误及修正

指出了一些微积分教辅书中一类极值问题的解答错误,分析了产生错误的原因,仔细研究了变量之间的关系,从而给出了正确的答案.     

一种积分数据的函数重构及其误差估计

本文考虑了一种基于函数积分平均值的函数重构方法,在定义了一个插值算子之后建立了误差估计.从理论分析结果可以看出这种方法得到的解是适定的,因此我们不需要选择正则化参数,这样就简化了算法,而且最后一系列的数值结果很好的验证了这种方法的有效性.     

交通运输系统协调发展理论与模型研究

提出了交通运输系统协调度的评价分析模型.从系统论的观点出发,提出了交通运输系统协调理论的概念,探讨了交通运输系统随时间而不断演化变迁的规律,给出了交通运输系统协调发展基本步骤;并根据协调学原理,讨论了交通运输系统的协调性问题,提出了系统协调发展模型,对交通运输子系统内部及子系统之间及系统整体的协调发展问题进行了研究,探讨了交通运输可持续发展的系统协调管理过程,为进一步研究交通运输系统的可持续发展奠定了基础.     

对称阵的最小多项式及其应用

本文研究了对称阵的最小多项式的存在唯一性,利用对称阵的正交分解的基本思想,获得了对称阵的最小多项式的具体表示形式,改进了Hamilton-Caylay定理.并且给出了对称阵最小多项式的几个应用.     

一个函数不等式的加强与延伸

从一个常见的不等式谈起,分析了多种证明方法,运用该不等式推导出了多个重要结论,对不等式进行了扩充和加强,解释了蕴含的意义,显示了该不等式的重要性和深刻性.     

Structure and Properties of Nanocrystalline Oxide Powders

The crystalline and porous structure of superfine powders and fibers made of alumina and zirconia doped with yttria is investigated. The particle sizes were determined by the methods of coherent dispersion and scanning transmission electron microscopy. Based on data on the sizes of crystallites of the metal oxides, which were obtained by different methods, it is found that crystalline transformations of the oxides lead to dispersion of the materials. The structural transformations of the superfine oxides are accompanied by changes in crystallite sizes and in the character and size of pores. The laws established allow one to purposefully control the process of producing nanostructured oxide powders and fibers, which can be utilized as active fillers for composite materials based on various matrices. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 831–840, November–December, 2005.     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

Rigid isotopy classification of real algebraic curves of bidegree (3,3) on quadrics

A rigid isotopy of nonsingular real algebraic curves on a quadric is a path in the space of such curves of a given bidegree. We obtain the rigid isotopy classification of nonsingular real algebraic curves of bidegree (3, 3) on a hyperboloid and on an ellipsoid. We also study of the space of real algebraic curves of bidegree (3, 3) with a single node or cusp. Translated fromMatematicheskie Zametki, Vol. 66, No. 6, pp. 810–815, December, 1999.     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

Cocyclic Codes of Length 40

There are 5 groups of order 20. This paper reports on the search for binary self-dual codes of length 40, cocyclic over any one of the first four groups, using cocyclic Hadamard matrices and the [I, A] construction. The fifth group is not investigated here. A total of 28 classes of extremal cocyclic self-dual codes were found—27 of these are doubly-even and one singly-even. The majority of these classes arise from the dihedral-cocyclic Hadamard matrices. There is also a class of dihedral-cocyclic Hadamard matrices which gives a large collection of [40, 20] codes with only one codeword of length 4.     

Survey on path and cycle embedding in some networks

To find a cycle (resp. path) of a given length in a graph is the cycle (resp. path) embedding problem. To find cycles of all lengths from its girth to its order in a graph is the pancyclic problem. A stronger concept than the pancylicity is the panconnectivity. A graph of order n is said to be panconnected if for any pair of different vertices x and y with distance d there exist xy-paths of every length from d to n. The pancyclicity or the panconnectivity is an important property to determine if the topology of a network is suitable for some applications where mapping cycles or paths of any length into the topology of the network is required. The pancyclicity and the panconnectivity of interconnection networks have attracted much research interest in recent years. A large amount of related work appeared in the literature, with some repetitions. The purpose of this paper is to give a survey of the results related to these topics for the hypercube and some hypercube-like networks.      

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

Torsional vibrations and dispersion of torsional waves in orthotropic composite rods

The Barr’s refined theory of torsional vibrations of isotropic rods of noncircular cross section is generalized for an orthotropic material. An analysis of natural frequencies of torsional vibration of free-free orthotropic prismatic rods of rectangular cross section is carried out with the help of an exact solution of the frequency equation. For orthotropic CFRP and GFRP rods, the improved theory, which takes into account the normal stresses and inertia forces in the axial direction, in some cases, predicts a noticeable raise in the natural frequencies compared with those following from the Saint-Venant classical theory. A good agreement is obtained between the experimental and calculated values of natural frequencies of torsional vibrations of rectangular quartz and fiber glass rods. The dispersion of torsional waves in an orthotropic quasi-homogeneous rod is considered. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 44, No. 2, pp. 165–182, March–April, 2008.     

Best approximation by downward sets with applications

We develop a theory of downward sets for a class of normed ordered spaces. We study best approximation in a normed ordered space X by elements of downward sets, and give necessary and sufficient conditions for any element of best approximation by a closed downward subset of X. We also characterize strictly downward subsets of X, and prove that a downward subset of X is strictly downward if and only if each its boundary point is Chebyshev. The results obtained are used for examination of some Chebyshev pairs （W,x）, where ∈ X and W is a closed downward subset of X