Heterogeneous optical signal transmission using re-modulation in injection-locked Fabry-Perot laser diode for wired and wireless access network

The radio over fiber system that transmits different signals simultaneously for 30-GHz wireless and 1.25-Gb/s wired network is proposed. One sub-carrier of a double-sideband wireless signal is re-modulated by injection-locking technique using a Fabry-Perot laser diode (FP LD) to generate a wired signal. Since the condition of injection-locking varies with changes of the input optical power and the injected current of the FP LD, the BER performance of the wired signal is investigated according to the modulation depth of both the wireless and wired signals, respectively. The error-free transmission of both the wired signal and the wireless one are achieved after 23-km SSMF.     

160-Gb/s polarization-multiplexing optical NRZ-DQPSK transmission using differential detection

Using differential detection,we perform polarization-multiplexing 160-Gb/s optical non-return-to-zero(NRZ) differential quadrature phase shift keying(DQPSK) signal transmission over 100-km standard single mode fiber at a bit error rate(BER) of less than 10-9.The enabling technology includes clock recovery,fine dispersion compensation,and polarization tracking for de-multiplexing.Furthermore,a hybrid clock recovery scheme is proposed.The scheme is realized with ordinary devices using an optoelectrical modula...     

42.8 Gbit/s DPSK信号的波分复用传输实验

实现了42.8 Gbit/s 差分相移键控调制信号的三信道波分复用传输实验.传输链路为410 km的标准单模光纤,分为四个放大段,采用色散补偿光纤进行色散补偿和掺铒光纤放大器/分布式喇曼放大器混合放大方式.给出了差分相移键控信号及其解调后的信号在背对背和传输后的光谱和眼图(中路波长信号).在接收端使用单端检测,给出中路波长的差分相移键控信号背对背情况和传输后的误码率曲线,并与单信道传输时进行比较.经过传输后的中路信号的误码率可维持在1.0E-3左右.     

42.8 Gbit/s DPSK信号的波分复用传输实验

实现了42.8 Gbit/s 差分相移键控调制信号的三信道波分复用传输实验.传输链路为410 km的标准单模光纤,分为四个放大段,采用色散补偿光纤进行色散补偿和掺铒光纤放大器/分布式喇曼放大器混合放大方式.给出了差分相移键控信号及其解调后的信号在背对背和传输后的光谱和眼图(中路波长信号).在接收端使用单端检测,给出中路波长的差分相移键控信号背对背情况和传输后的误码率曲线,并与单信道传输时进行比较.经过传输后的中路信号的误码率可维持在1.0E-3左右.     

Dual-Output Mach–Zehnder Modulator for Optical Access Networks

This paper employs dual-output Mach–Zehnder Modulator (MZM) for optical access networks without optical filters. Light waves generated from multiple laser sources are multiplexed and fed into dual-output MZM. Biasing the dual-output MZM at null point generates central carriers in one output port and first-order sidebands in another output port. Reflective semiconductor optical amplifier modulates both the central carriers and sidebands with wired and wireless data, respectively. The modulated optical signals are combined by polarization beam splitter and transmitted through 25-km single-mode fiber. The performance of the proposed scheme is proved by clear eye-diagrams and great bit error rate (BER) curves. Moreover, the power penalty at the BER of 10^-9 is less than 1 dB for both wired and wireless signals. Therefore, the proposed system simultaneously transmits wired and wireless signals.     

Employing mutually injection-locked FP LDs scheme over full-duplex radio-on-fiber transport systems

A full-duplex radio-on-fiber (ROF) transport system based on mutually injection-locked Fabry-Perot laser diodes (FP LDs) as light source is proposed and demonstrated. Transmission performances over a 40-km standard single-mode fiber (SMF) for full-duplex transmission were investigated. Good performance of bit error rate (BER) was achieved in our proposed systems. We directly modulate the FP LDs in mutually injection-locked scheme instead of using expensive external modulator and sophisticated optical carrier suppression technique; it reveals an outstanding alternative with advantages in simplicity and cost.     

Optimization of NRZ Data Transmission at 10 Gbit/s over G.652 Without In-Line DFAs

Performance limits of NRZ data transmission at 10 Gbit/s over standard single mode fiber (SSMF, G.652) without the deployment of in-line erbium-doped fiber amplifiers (EDFAs) are evaluated by means of numerical simulation. The fiber system was modeled using the standard split-step Fourier algorithm for the solution of nonlinear Schroedinger equation. The effect of group velocity dispersion (GVD) compensation scheme, degree of GVD compensation of the SSMF, and input optical powers to SSMF and to the dispersion compensating fiber (DCF) have been investigated with the aim to maximize the distance between transmitter and receiver. We have found that a post-compensation scheme performs better than the pre-compensation scheme and that, by careful selection of input powers and degree of GVD compensation, it should be possible to keep the bit-error-ratio (BER) below 10 upper index = 15 for an SSMF length of 270 km.     

Optimization of NRZ Data Transmission at 10 Gbit/s over G.652 Without In-Line DFAs

Performance limits of NRZ data transmission at 10 Gbit/s over standard single mode fiber (SSMF, G.652) without the deployment of in-line erbium-doped fiber amplifiers (EDFAs) are evaluated by means of numerical simulation. The fiber system was modeled using the standard split-step Fourier algorithm for the solution of nonlinear Schroedinger equation. The effect of group velocity dispersion (GVD) compensation scheme, degree of GVD compensation of the SSMF, and input optical powers to SSMF and to the dispersion compensating fiber (DCF) have been investigated with the aim to maximize the distance between transmitter and receiver. We have found that a post-compensation scheme performs better than the pre-compensation scheme and that, by careful selection of input powers and degree of GVD compensation, it should be possible to keep the bit-error-ratio (BER) below 10 upper index = 15 for an SSMF length of 270 km.     

Demonstration of single channel 160-Gb/s OTDM 100-km transmission system

A 16 × 10-Gb/s optical time-division-multiplexing (OTDM) 100-km transmission system with home-made multiplexer is demonstrated experimentally. A demultiplexer based on two cascaded electro-absorption modulator (EAM) and a clock recovery unit form a feedback loop. Error-free demultiplexing from 160-Gb/s to 10-Gb/s after over 100-km transmission is achieved. The power penalty is about 3.5 dB with the bit error rate of 10⁻⁹.     

Delay-Doppler domain decision feedback turbo equalization for OTFS modulation

Emerging evidence indicates that orthogonal time–frequency space (OTFS) modulation is a potential candidate modulation scheme for high mobility wireless communications. However, OTFS may experience significant inter-symbol interference (ISI) and inter-Doppler interference (IDI) in the receiver. In this paper, we propose a soft decision feedback turbo equalization for OTFS transmission over delay-Doppler channels to jointly combat both interferences. A novel block decision feedback equalization (BDFE) algorithm is constructed using the band feature of the channels in the delay-Doppler domain. The feedforward and feedback filters are designed by the delay-time channels coefficients. According to the designed filter, an equivalent system model is employed to allow turbo equalization. The posterior probability is established using the soft prior information and feedback filter, and then fed back to the channel decoder as external information. Both theoretical analysis and simulation results demonstrate the effectiveness of the proposed scheme in improving the bit error rate (BER) performance and combat various interference. Numerical simulations are finally provided to justify the validity of the proposed scheme in improving the bit error rate (BER) performance and combating various interference.     

Bidirectional colorless wired and wireless WDM-PON with improved dispersion tolerance for radio over fiber

We propose and demonstrate a bidirectional transmission, hybrid wired and wireless access network based on subcarrier modulation (SCM) techniques. The scheme simultaneously enables the dispersion-tolerant transmission of millimeter (mm)-wave signals for use in wireless access networks, downstream baseband signals for optical wired access networks, and optical continuous-wave (CW) carriers for use in upstream data remodulations. Error-free transmissions through a 25-km length of single mode fiber (SMF) for both the downstream baseband and the remodulated upstream signals are confirmed by bit-error-rate (BER) measurements. The dispersion tolerance of the radio-over-fiber (RoF) signal is assessed using numerical simulations.     

400 Gbps WDM transmission over short range with discrete multi-tone

We simulate 400 Gbps WDM transmission system with DMT modulation. The system reaches 5 km SSMF with 100 Gbps per wavelength when the BER is 1e−3. From our analyses, we can see that DMT can be a promising solution for high capacity optical transmission system over short distance.     

Fiber-wireless (FiWi) access network: Performance evaluation and scalability analysis of the physical layer

The fiber-wireless (FiWi) access network is a prestigious architecture for next generation (NG) access network. NG access networks are proposed to provide high data rate, broadband multiple services, scalable bandwidth, and flexible communication for manifold wireless end-users (WEUs). In this paper, the FiWi access network is designed based on a wavelengths division multiplexing/time division multiplexing passive optical network (WDM/TDM PON) at the optical backhaul with data rate of 2.5 Gb/s and wireless fidelity-worldwide interoperability for microwave access (WiFi–WiMAX) technologies at the wireless front-end along a 50 m–5 km wireless links with data rate of 54–30 Mb/s, respectively. The performance of the optical backhaul and the wireless front-end, in the proposed FiWi access network, has been evaluated in terms of bit error rate (BER), error vector magnitude (EVM), and signal-to-noise ratio (SNR) of the physical (PHY) layer. The scalability of the optical backhaul based on maximum split ratio of 1/32 for each wavelength channel and a fiber length of 24 km from the central office (CO) to the access point (AP) is analyzed with bit error rate (BER) of 10⁻⁹.     

Data-aided channel estimation and frequency domain equalization of minimum-shift keying in optical transmission systems

We demonstrate a digital optical communication system based on minimum shift keying （MSK） signal transmission with coherent detection. 5-Gb/s MSK signal can transmit over a 160-km standard single mode fiber （SSMF） without phase compensation. At the receiver, we use data-aided channel estimation and frequency domain equalization （FDE） techniques in the digital signal processing （DSP） algorithm, then analyze its performance characteristics compared with quadrature phase shift keying （QPSK） format. The simulation results show that the MSK format will be a potential candidate for next-generation access network.     

100 Gb/s RZ-OOK transmission through 212 km deployed SSMF using monolithically integrated ETDM receiver module

100 Gb/s on-off keying (OOK) transmission over 212 km installed standard single-mode fibers using an Indium Phosphide (InP)-based electrical clock-data-recovery (CDR) and demultiplexer module was demonstrated. 5.5 × 10^− 11 bit error rate (BER) performance was achieved and 1.1-dB optical signal-to-noise ratio (OSNR) penalty was required at 10^− 9 BER after transmission.     

52 m/9 Gb/s PAM4 plastic optical fiber-underwater wireless laser transmission convergence with a laser beam reducer

A 52 m/9 Gb/s four-level pulse amplitude modulation(PAM4) plastic optical fiber(POF)-underwater wireless laser transmission(UWLT) convergence with a laser beam reducer is proposed. A 52 m/9 Gb/s PAM4 POFUWLT convergence is practically demonstrated with the application of a laser beam reducer to reduce the collimated beam diameter. A 50 m graded-index(GI)-POF is employed as an underwater extender to efficiently enhance the coverage of UWLT. The performances of PAM4 POF-UWLT convergence in view of bit error rate(BER) and eye diagrams improve with the decrease of the collimated beam diameter because of the small amount of light absorbed by clear ocean water. Competent BER and eye diagrams(three independent eye diagrams) are achieved over a 50 m GI-POF transmission with a 2 m clear ocean water link.     

Performance evaluation of path-averaged soliton pulses in loss-managed 10-Gbps soliton transmission link over a long haul

In this paper, the performance evaluation of path-averaged soliton transmission link for various performance measures viz. OSNR, optical power, extinction ratio, bit error rate (BER) and Q factor at different levels of noise figure and values of pulse width (FWHM) has been carried out. The performance of soliton transmission link is studied, taking into account soliton interaction, amplified spontaneous emission (ASE) noise and noise figure. The model presented considers interaction in a random sequence of solitons and the effect of the ASE noise added in each amplification stage. The influence of ASE noise, noise figure and pulse width with different amplifier spacing on the BER and quality factor has been investigated. It has been shown that these play dominant roles in degrading the performance measures. We have demonstrated the capability of path-averaged (guiding-centre) soliton for a long-haul distance of 17,000 km at a bit rate of 10 Gbps without ASE effect and noise figure in each amplifier span length of 500 km. The average value of quality factor is found to be 16.6 dB and the average BER is of the order of 10⁻¹² over the transmission distance of 17,000 km. Further, it has been investigated that a severe system penalty results on the inclusion of ASE effect and noise figure in order to achieve the same level of performance. Thus, the investigations ascertain that in order to maintain the same level of BER and Q factor, the amplifier spacing and total transmission distance reduce considerably.     

40-Gb/s star 16-QAM transmitter based on single dual-drive Mach-Zehnder modulator

We propose a 40-Gb/s star 16-ary quadrature amplitude modulation （16-QAM） transmitter using a single dual-drive Mach-Zehnder modulator （DDMZM）. This transmitter is demonstrated through experiment and simulation and shows the advantage of simplicity for implementation. Simulation results indicate that error free performance could be achieved for the generated signal after 80-km standard single-mode fiber （SSMF） transmission with coherent detection scheme.     

大气闪烁对无线光CDMA通信系统性能的影响

将光CDMA技术应用到无线光通信中。提出了基于脉冲位置调制的二维大气无线光CDMA通信系统，并分析了该通信系统的性能。考虑多用户干扰、APD噪声以及热噪声等干扰因素的影响，采用数值分析的方法，详细分析了大气湍流引起的大气闪烁对二维无线光CDMA通信系统误码率的影响。结果表明，大气闪烁是影响二维无线光CDMA系统误码率性能的一个重要因素；当大气闪烁的对数方差较小(如σ2s=0.1)时，该系统可以实现高速率通信；当大气闪烁的对数方差较大(σ2s≥0.2)时，在有限的光功率条件下，该系统难以实现通信，需要采用信道编码技术来提高系统的误码率性能。     

Optimizing 10 Gbps optical communication system with duty cycle selection of return to zero pulse

We have investigated the return-to-zero (RZ) pulse duty cycle for single-channel Standard Single mode fiber (SSMF), Non Zero Dispersion shifted fibers (normal NZDSF and anomalous NZDSF fiber) for 10 Gbps optical fiber communication system. We give a comprehensive look on the behavior of variable duty cycle optical RZ pulse indicating that lowest bit error rate for duty cycle 0.8 among the duty cycle values 0.2, 0.4, 0.6 and 0.8 investigated for the case of SSMF. The single repeaterless mode fiber length is increased from existing 55 km at duty cycle 0.2 to fiber length 85 km by keeping duty cycle at 0.8. The result is also emphasized through the 10 dB Q value improvement and corresponding improvement in average eye opening diagram. The normal NZDSF show similar improvement but at greater fiber length, it offers BER 10⁻⁹ at length 110 km with duty cycle 0.2. NZDSF operating length can further be increased to length 160 km by keeping duty cycle 0.8. The corresponding 8 dB Q value improvement and Average eye opening improvement also supports the result through its graphical variation. Thirdly Anomalous NZDSF for same optical communication system showed that 0.2 duty cycle value give operational length of 130 km which could be extended to 160 km if 0.8 duty cycle is kept. The corresponding 8 dB Q value improvement, average eye-opening improvement endorsed the fact in the graphs.