In situ preparation of polymeric cobalt phthalocyanine–decorated TiO2 nanorods for efficient photocatalytic CO2 reduction

The integration of photosensitizers with low-cost and non-toxic metal oxides is a promising strategy to design heterogeneous photocatalysts for CO₂ reduction. Herein, p–n heterojunction photocatalysts (T-CoPPcs) consisting of p-type polymeric cobalt phthalocyanines (CoPPcs) as a photosensitizer coupled with n-type TiO₂ nanorods were fabricated through a facile, eco-friendly, one-pot hydrothermal reaction. In this process, CoPPcs were grown on n-type TiO₂ nanorods, whereas protonated titanate nanorods began converting to the highly crystalline anatase phase with small crystals on the TiO₂ surfaces. The introduction of CoPPcs not only improved the solar light utilization but also accelerated the separation and migration of charge carriers via the p–n heterojunction with the strong interfacial contact Ti–O–Co bond. The increases in crystallinity and surface area of TiO₂ nanorods also contributed to the enhanced photoactivities of T-CoPPcs. The CO₂ photoreduction of the synthesized materials was evaluated in CO₂-saturated MeCN/water using [Co(bpy)₃]²⁺ as a cocatalyst and triethanolamine as a hole scavenger. The optimized nanocomposite exhibited a remarkable CO generation rate of 4.42 mmol/h/g with a high selectivity of 85.3% and outstanding catalytic stability. The influences of cocatalyst concentration, water content, catalyst loading, and hole scavenger concentration were optimized for efficient CO₂ reduction. The photocatalytic CO₂ conversion efficiency of the present system is found to be higher than that of TiO₂-based materials reported in the literature. We believe that this research into a heterostructural design strategy and photocatalytic system may be an inspiration for the development of photocatalytic CO₂-to-CO conversion.     

Post-modification of metal-organic framework for improved CO2 photoreduction efficiency

Utilizing metal-organic frameworks (MOFs) to design photocatalysts for CO₂ reduction catalysts is an excellent idea but currently restricted by the relatively low activity. Enhancing CO₂ affinity and tuning the oxidation state of metal clusters in MOFs might be a solution to improve the catalytic performance. Herein, the Cl-bridge atoms in the metal clusters of a cobalt MOF were easily exchanged with OH^?, which simultaneously oxidized a portion of Co(II) to Co(III) and resulted in a much enhanced photocatalytic activity for CO₂ reduction. In contrast, the original framework does not exhibit such superior activity. Comprehensive characterizations on their physicochemical properties revealed that the introduction of hydroxyl group not only greatly increases the CO₂ affinity but also alters the oxidation state of metal clusters, resulting in significantly improved photocatalytic activities for CO₂ reduction. This work provides important insight into the design of efficient photocatalysts.     

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)₃²⁺/Fe(bpy)₃²⁺) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H₂) evolution. Rubpy-ZnPor COF achieved the highest H₂ yield (30 338 μmol g⁻¹ h⁻¹) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H₂ was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.     

光催化CO2转化为碳氢燃料体系的综述

传统化石能源燃烧产生CO₂引起的地球变暖和能源短缺已经成为一个严重的全球性问题. 利用太阳光和光催化材料将CO₂还原为碳氢燃料, 不仅可以减少空气中CO₂浓度, 降低温室效应的影响, 还可以提供碳氢燃料, 缓解能源短缺问题, 因此日益受到各国科学家的高度关注. 本文综述了光催化还原CO₂为碳氢燃料的研究进展, 介绍了光催化还原CO₂的反应机理, 并对现阶段报道的光催化还原CO₂材料体系进行了整理和分类, 包括TiO₂光催化材料, ABO₃型钙钛矿光催化材料, 尖晶石型光催化材料, 掺杂型光催化材料, 复合光催化材料, V、W、Ge、Ga基光催化材料及石墨烯基光催化材料. 评述了各种材料体系的特点及光催化性能的一些影响因素. 最后对光催化还原CO₂的研究前景进行了展望.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Supramolecular Hemicage Cobalt Mediators for Dye‐Sensitized Solar Cells

A new class of dye‐sensitized solar cells (DSSCs) using the hemicage cobalt‐based mediator [Co(ttb)]^2+/3+ with the highly preorganized hexadentate ligand 5,5′′,5′′′′‐((2,4,6‐triethyl benzene‐1,3,5‐triyl)tris(ethane‐2,1‐diyl))tri‐2,2′‐bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D –π–A dyes utilizing either [Co(ttb)]^2+/3+ or the conventional [Co(bpy)₃]^2+/3+ (bpy=2,2′‐bipyridine) redox mediator are comparable under 1000 W m^?2 AM 1.5 G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120‐hour continuous light illumination stability test for DSSCs using [Co(ttb)]^2+/3+ resulted in a 10 % increase in the performance, whereas a 40 % decrease in performance was found for [Co(bpy)₃]^2+/3+ electrolyte‐based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)]^2+/3+ complexes as redox mediators for efficient, cost‐effective, large‐scale DSSC devices.     

Engineering a Copper Single-Atom Electron Bridge to Achieve Efficient Photocatalytic CO2 Conversion

Developing highly efficient and stable photocatalysts for the CO₂ reduction reaction (CO₂RR) remains a great challenge. We designed a Z-Scheme photocatalyst with N−Cu₁−S single-atom electron bridge (denoted as Cu-SAEB), which was used to mediate the CO₂RR. The production of CO and O₂ over Cu-SAEB is as high as 236.0 and 120.1 μmol g⁻¹ h⁻¹ in the absence of sacrificial agents, respectively, outperforming most previously reported photocatalysts. Notably, the as-designed Cu-SAEB is highly stable throughout 30 reaction cycles, totaling 300 h, owing to the strengthened contact interface of Cu-SAEB, and mediated by the N−Cu₁−S atomic structure. Experimental and theoretical calculations indicated that the SAEB greatly promoted the Z-scheme interfacial charge-transport process, thus leading to great enhancement of the photocatalytic CO₂RR of Cu-SAEB. This work represents a promising platform for the development of highly efficient and stable photocatalysts that have potential in CO₂ conversion applications.     

Semiconductor/Covalent-Organic-Framework Z-Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z-scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z-scheme photocatalysts combining water-oxidation semiconductors (TiO₂, Bi₂WO₆, and α-Fe₂O₃) with CO₂ reduction COFs (COF-316/318) was synthesized and exhibited high photocatalytic CO₂-to-CO conversion efficiencies (up to 69.67 μmol g⁻¹ h⁻¹), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic-semiconductor systems utilizing the Z-scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor-to-COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

A Noble‐Metal‐Free Nickel(II) Polypyridyl Catalyst for Visible‐Light‐Driven Hydrogen Production from Water

The complex [Ni(bpy)₃]²⁺ (bpy=2,2′‐bipyridine) is an active catalyst for visible‐light‐driven H₂ production from water when employed with [Ir(dfppy)₂(Hdcbpy)] [dfppy=2‐(3,4‐difluorophenyl)pyridine, Hdcbpy=4‐carboxy‐2,2′‐bipyridine‐4′‐carboxylate] as the photosensitizer and triethanolamine as the sacrificial electron donor. The highest turnover number of 520 with respect to the nickel(II) catalyst is obtained in a 8:2 acetonitrile/water solution at pH 9. The H₂‐evolution system is more stable after the addition of an extra free bpy ligand, owing to faster catalyst regeneration. The photocatalytic results demonstrate that the nickel(II) polypyridyl catalyst can act as a more effective catalyst than the commonly utilized [Co(bpy)₃]²⁺. This study may offer a new paradigm for constructing simple and noble‐metal‐free catalysts for photocatalytic hydrogen production.     

Photochemical In Situ Exfoliation of Metal–Organic Frameworks for Enhanced Visible-Light-Driven CO2 Reduction

Two novel two-dimensional metal–organic frameworks (2D MOFs), 2D-M₂TCPE (M=Co or Ni, TCPE=1,1,2,2-tetra(4-carboxylphenyl)ethylene), which are composed of staggered (4,4)-grid layers based on paddlewheel-shaped dimers, serve as heterogeneous photocatalysts for efficient reduction of CO₂ to CO. During the visible-light-driven catalysis, these structures undergo in situ exfoliation to form nanosheets, which exhibit excellent stability and improved catalytic activity. The exfoliated 2D-M₂TCPE nanosheets display a high CO evolution rate of 4174 μmol g⁻¹ h⁻¹ and high selectivity of 97.3 % for M=Co and Ni, and thus are superior to most reported MOFs. The performance differences and photocatalytic mechanisms have been studied with theoretical calculations and photoelectric experiments. This study provides new insight for the controllable synthesis of effective crystalline photocatalysts based on structural and morphological coregulation.     

Study of Excited States and Electron Transfer of Semiconductor-Metal-Complex Hybrid Photocatalysts for CO2 Reduction by Using Picosecond Time-Resolved Spectroscopies

A semiconductor-metal-complex hybrid photocatalyst was previously reported for CO₂ reduction; this photocatalyst is composed of nitrogen-doped Ta₂O₅ as a semiconductor photosensitizer and a Ru complex as a CO₂ reduction catalyst, operating under visible light (>400 nm), with high selectivity for HCOOH formation of more than 75 %. The electron transfer from a photoactive semiconductor to the metal-complex catalyst is a key process for photocatalytic CO₂ reduction with hybrid photocatalysts. Herein, the excited-state dynamics of several hybrid photocatalysts are described by using time-resolved emission and infrared absorption spectroscopies to understand the mechanism of electron transfer from a semiconductor to the metal-complex catalyst. The results show that electron transfer from the semiconductor to the metal-complex catalyst does not occur directly upon photoexcitation, but that the photoexcited electron transfers to a new excited state. On the basis of the present results and previous reports, it is suggested that the excited state is a charge-transfer state located between shallow defects of the semiconductor and the metal-complex catalyst.     

Highly Efficient Photoreduction of Low-Concentration CO2 to Syngas by Using a Polyoxometalates/RuII Composite

At present, the fixation of CO₂ always requires it to be extracted from the atmosphere first, which leads to more energy consumption. Thus, direct photoreduction of low-concentration CO₂ to useful chemicals (e.g., syngas) under sunlight is significant from an energy-saving and environmentally friendly perspective. Here, the design and fabrication of a [Ru(bpy)₃]/[Co₂₀Mo₁₆P₂₄] composite is demonstrated for visible-light-driven syngas production from diluted CO₂ (3–20 %) gas with a high yield of approximately 1000 TONs (turnover number of syngas). This activity is an order of magnitude higher than the reported system with [Ru(bpy)₃]²⁺ participation. With evidence from ultrafast transient absorption, GC-MS, ¹H NMR spectroscopy and in situ transient photovoltage tests, a clear and fundamental understanding of the highly efficient photoreduction of CO₂ by the [Ru(bpy)₃]/[Co₂₀Mo₁₆P₂₄] composite is achieved. Making use of the structure and property designable polyoxometalates towards the photo-fixation of CO₂ is a conceptually distinct and commercially interesting strategy for making useful chemicals and environmental protection.     

Studies on Photocatalytic CO2 Reduction over NH2‐Uio‐66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal–Organic Frameworks

Metal–organic framework (MOF) NH₂‐Uio‐66(Zr) exhibits photocatalytic activity for CO₂ reduction in the presence of triethanolamine as sacrificial agent under visible‐light irradiation. Photoinduced electron transfer from the excited 2‐aminoterephthalate (ATA) to Zr oxo clusters in NH₂‐Uio‐66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr^III and its involvement in photocatalytic CO₂ reduction was confirmed by ESR analysis. Moreover, NH₂‐Uio‐66(Zr) with mixed ATA and 2,5‐diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO₂ reduction due to its enhanced light adsorption and increased adsorption of CO₂. This study provides a better understanding of photocatalytic CO₂ reduction over MOF‐based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO₂ reduction.     

Coupling Benzylamine Oxidation with CO2 Photoconversion to Ethanol over a Black Phosphorus and Bismuth Tungstate S-Scheme Heterojunction

Photoconversion of CO₂ and H₂O into ethanol is an ideal strategy to achieve carbon neutrality. However, the production of ethanol with high activity and selectivity is challenging owing to the less efficient reduction half-reaction involving multi-step proton-coupled electron transfer (PCET), a slow C−C coupling process, and sluggish water oxidation half-reaction. Herein, a two-dimensional/two-dimensional (2D/2D) S-scheme heterojunction consisting of black phosphorus and Bi₂WO₆ (BP/BWO) was constructed for photocatalytic CO₂ reduction coupling with benzylamine (BA) oxidation. The as-prepared BP/BWO catalyst exhibits a superior photocatalytic performance toward CO₂ reduction, with a yield of 61.3 μmol g⁻¹ h⁻¹ for ethanol (selectivity of 91 %).In situ spectroscopic studies and theoretical calculations reveal that S-scheme heterojunction can effectively promote photogenerated carrier separation via the Bi−O−P bridge to accelerate the PCET process. Meanwhile, electron-rich BP acts as the active site and plays a vital role in the process of C−C coupling. In addition, the substitution of BA oxidation for H₂O oxidation can further enhance the photocatalytic performance of CO₂ reduction to C₂H₅OH. This work opens a new horizon for exploring novel heterogeneous photocatalysts in CO₂ photoconversion to C₂H₅OH based on cooperative photoredox systems.     

Co掺杂提高ZnIn2S4光催化剂可见光下的产氢性能

采用溶剂热法制备出Co掺杂的ZnIn₂S₄催化剂.用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)漫反射光谱等技术对其进行了表征. XRD 和XPS结果表明, Co成功地掺杂到ZnIn₂S₄晶格内. 随着Co掺杂量增加, 样品的吸收边发生红移, 同时ZnIn₂S₄的微球形态会遭到破坏. 光催化反应实验结果表明Co²⁺掺杂提高了ZnIn₂S₄光催化性能, 掺杂量为0.3%(w)时表现出最佳催化性能. 并对可能的催化机理进行了讨论.     

Photocatalytic carbon dioxide reduction by photocatalyst innovation

The photocatalytic conversion of carbon dioxide into sustainable fuel methanol using carbon quantum dots is highlighted in this paper. The multifaceted roles of carbon quantum dots in photocatalytic reactions and future directions of CQD materials are outlined.     

Round‐the‐Clock Photocatalytic Hydrogen Production with High Efficiency by a Long‐Afterglow Material

Long afterglow materials can store and release light energy after illumination. A brick‐like, micrometer‐sized Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long‐afterglow material is used for hydrogen production by the photocatalytic reforming of methanol under round‐the‐clock conditions for the first time, achieving a solar‐to‐hydrogen (STH) conversion efficiency of 5.18 %. This material is one of the most efficient photocatalysts and provides the possibility of practical use on a large scale. Its remarkable photocatalytic activity is attributed to its unique carrier migration path and large number of lattice defects. These findings expand the application scope of long afterglow materials and provide a new strategy to design efficient photocatalysts by constructing trap levels that can prolong carrier lifetimes.     

Simultaneous co-Photocatalytic CO2 Reduction and Ethanol Oxidation towards Synergistic Acetaldehyde Synthesis

Photocatalytic conversion of CO₂ is of great interest but it often suffers sluggish oxidation half reaction and undesired by-products. Here, we report for the first the simultaneous co-photocatalytic CO₂ reduction and ethanol oxidation towards one identical value-added CH₃CHO product on a rubidium and potassium co-modified carbon nitride (CN-KRb). The CN-KRb offers a record photocatalytic activity of 1212.3 μmol h⁻¹g⁻¹ with a high selectivity of 93.3 % for CH₃CHO production, outperforming all the state-of-art CO₂ photocatalysts. It is disclosed that the introduced Rb boosts the *OHCCHO fromation and facilitates the CH₃CHO desorption, while K promotes ethanol adsorption and activation. Moreover, the H⁺ stemming from ethanol oxidation is confirmed to participate in the CO₂ reduction process, endowing near ideal overall atomic economy. This work provides a new strategy for effective use of the photoexcited electron and hole for high selective and sustainable conversion of CO₂ paired with oxidation reaction into identical product.     

钙钛矿氧化物H1.9K0.3La0.5Bi0.1Ta2O7和Pt/WO3组成的Z体系下完全光解水性能

以质子化层状钙钛矿氧化物H_1.9K_0.3La_0.5Bi_0.1Ta₂O₇ (HKLBT)作为产氢催化剂, Pt/WO₃作为产氧催化材料进行Z 型体系下完全分解水反应. 考察了不同载流子传递介质及不同载流子浓度对反应活性的影响. 结果表明, 以Fe²⁺/Fe³⁺为载流子传递介质时可以实现水的完全分解(H₂/O₂体积比为2:1), 8 mmol·L^-1的FeCl₃作为初始载流子传递介质时, 产氢、产氧活性分别为66.8和31.8 μmol·h^-1, 氢氧体积比为2.1:1. 受光催化材料对载流子传递介质氧化还原速度的限制, 过高的载流子传递介质浓度并不能提高光催化活性.     

Relative Local Electron Density Tuning in Metal-Covalent Organic Frameworks for Boosting CO2 Photoreduction

The high local electron density and efficient charge carrier separation are two important factors to affect photocatalytic activity, especially for the CO₂ photoreduction reaction. However, the systematic studies on the structure-functional relationship regarding the above two factors based on precisely structure model are rarely reported. Herein, as a proof-of-concept, we developed a new strategy on the evaluation of local electron density by controlling the relative electron-deficient (ED) and electron-rich (ER) intensity of monomer at a molecular level based on three rational-designed vinylene-linked sp² carbon-covalent organic frameworks (COFs). As expected, the as-prepared vinylene-linked sp² carbon-conjugated metal-covalent organic framework (MCOFs) (VL-MCOF-1) with molecular junction exhibited excellent activities for CO₂-to-HCOOH conversion (283.41 μmol g⁻¹ h⁻¹) and high selectivity of 97.1 %, much higher than the VL-MCOF-2 and g-C₃₄N₆-COF, which is due to the synergistic effect of the multi-electronic metal clusters (Cu₃(PyCA)₃) (PyCA=pyrazolate-4-carboxaldehyde) as strong ER roles and cyanopyridine units as ED roles and active sites, as well as the boosted photo-induced charge separation efficiency of vinyl connection and increased light utilization ability. These results not only provide a strategy for regulating the electron-density distribution of photocatalysts at the molecular level but also offers profound insights for metal clusters-based COFs to effective CO₂ conversion.