以2, 4-二氯苯氧乙酸构筑的一维链状钕配位聚合物:合成、晶体结构和荧光性质

水热条件下采用Nd(NO3)3.6H2O,2,4-二氯苯氧乙酸(Hdcp)和4,4′-联吡啶(bpy)为反应物合成出一个新的具有一维链状结构的金属有机配位聚合物{[Nd(dcp)3(H2O)2].1.5bpy.2H2O}n(1),并分别用元素分析,红外谱图,差热分析,X-射线粉末衍射,紫外-可见光谱和X-射线单晶衍射表征该结构。晶体结构结果分析表明:2,4-二氯苯氧乙酸离子(dcp)将Nd髥离子连接成一维链状结构(由{Nd2(dcp)6(H2O)4}重复单元构成),相邻链之间通过氢键作用最终被连接成二维网络结构。荧光谱图表明常温固态下配合物1发射近红外荧光,荧光寿命为3.27 ms。     

2-(5-甲基-1，3，4-噻二唑)-硫乙酸稀土配合物的合成和晶体结构

由溶液法合成了2个稀土配合物{[Ln(Hmtyaa)3(H2O)2].H2O}n(Ln=Nd,1;Pr,2)(Hmtyaa=2-(5-甲基-1,3,4-噻二唑)-硫乙酸),用X-射线单晶衍射仪测定了配合物的单晶结构,并对其进行了元素分析、红外光谱、热重和粉末X-射线衍射等表征。晶体结构表明:配合物1和2结构相同,都属于三斜晶系,P1空间群。配合物中金属离子均采取九配位模式,金属离子被配体桥连形成一维双链结构,该一维双链被氢键和π-π作用连接成二维层状结构。     

三聚氰胺和对苯二氧乙酸共晶中的三维氢键网络(英文)

合成了一个新的超分子聚合物{(MAH+)2(p-BDOA2-)·4H2O}n(MA=三聚氰胺;p-BDOAH2=对苯二氧乙酸),通过X-射线对其结构进行了表征。在该聚合物中,三聚氰胺被质子化,相邻的三聚氰胺分子通过氢键形成一维阳离子链(MAH+)n,相邻的阳离子链由p-BDOA2-阴离子连接构成波浪状的二维层,层状结构通过水分子的氢键和π-π堆积形成三维结构。     

三聚氰胺和对苯二氧乙酸共晶中的三维氢键网络

合成了一个新的超分子聚合物{(MAH+)2(p-BDOA2-)·4H2O}n(MA=三聚氰胺;p-BDOAH2=对苯二氧乙酸),通过X-射线对其结构进行了表征。在该聚合物中,三聚氰胺被质子化,相邻的三聚氰胺分子通过氢键形成一维阳离子链(MAH+)n,相邻的阳离子链由p-BDOA2-阴离子连接构成波浪状的二维层,层状结构通过水分子的氢键和π-π堆积形成三维结构。     

一维链状锌配位聚合物{[Zn(H2O)2(L)(phen)]·3H2O}n的合成、晶体结构和性能研究

合成了一种锌配位聚合物{[Zn(H2O)2(L)(phen)].3H2O}n(1),其中,H2L=1-氨基-8-萘酚-3,6-二磺酸并利用元素分析、红外、紫外、荧光、热重和X-射线单晶衍射分析进行了表征。标题配合物属正交晶系,Pnma空间群,a=1.698 90(12)nm,b=0.661 88(11)nm,c=2.480 40(14)nm,V=2.789 1(5)nm3,Z=4,Mr=634.92,Dc=1.512 g.cm-3,R=0.058 6,wR=0.121 4。标题配合物呈现一维链状结构,链内L2-和phen配体之间存在π-π堆积作用,链与链之间通过氢键扩展为二维超分子网络。     

含2-苯氧基丙酸根的镍、锌配位聚合物的合成与晶体结构

用溶液法和水热法分别合成了2个含2-苯氧基丙酸配体(HL)的聚合物{[NiL2(H2O)2(bipy)].2H2O}n(1)、{[ZnL2(bipy)].2H2O}n(2)(bipy=4,4′-联吡啶),用元素分析、红外光谱、热重和单晶X-射线衍射对产物进行了表征。在化合物1中,镍原子与2个羧基氧原子、2个配位水氧原子及2个4,4′-联吡啶的2个氮原子配位,配位数为6,镍原子的配位构型为畸变的八面体;而在化合物2中,锌原子与2个羧基氧原子及2个4,4′-联吡啶中的2个氮原子配位,锌原子的配位构型为畸变的四面体。在这2个化合物里,4,4′-联吡啶通过氮原子连接金属原子形成一维链状。链间氢键与π-π堆积作用又将一维链链接成二维层状结构。     

基于5-(4-(2,6-二(2-吡啶基)-4-吡啶基)苯氧基)间苯二甲酸的Ni(Ⅱ)和Cd(Ⅱ)配位聚合物的合成与晶体结构

用溶剂热法合成了2个以5-(4-(2,6-二(2-吡啶基)-4-吡啶基)苯氧基)间苯二甲酸(H_2L)为配体的金属-有机配位聚合物:{[NiL(H_2O)]·H_2O}_n(1),[Cd L(phen)]_n(2)。通过X-射线单晶衍射,元素分析和红外光谱进行了结构表征。结构分析表明,在1中,L~(2-)配体的2个羧基氧原子桥连相邻的2个Ni(Ⅱ)离子,形成平行于a轴的一维链,链间则通过吡啶氮原子与金属离子连接,最终形成具有(4,4)-连接三维网络结构。在2中,Cd(Ⅱ)为七配位的单帽三棱柱几何构型,L2-配体通过2个羧基和1个吡啶基与3个中心金属Cd(Ⅱ)相连,形成(3,3)-连接的二维层面结构,又通过面间的π…π堆积作用形成了3D超分子结构。测定了配位聚合物的热稳定性和2的荧光性质。     

N，N’-二羧甲基-2-甲基苯并咪唑内翁盐的合成及晶体结构

以2-甲基苯并咪唑为原料,合成了一个新型的苯并咪唑二羧酸衍生物,基结构通过IR,1HNMR,元素分析和X-射线单晶衍射法确定.X射线衍射单晶结构分析表明,固态时标题化合物通过分子间氢键形成一维无限链状结构,这些一维无限链状结构又通过链与链间的苯并咪唑环的π-π堆积作用形成二维结构.标题化合物的晶体属单斜晶系,P21/c空间群;Mr568.54,a=19.821(3),b=7,.4501(11),c=20.093 (3)A,β=116.479(3)°,v=2655.8(3)A3,z=4,Dc=1.422 mg· m-3,F(000)=1200,最终偏离因子R=0.0675,wR=0.2187.     

N,N′-二羧甲基-2-甲基苯并咪唑内鎓盐的合成及晶体结构

以2-甲基苯并咪唑为原料,合成了一个新型的苯并咪唑二羧酸衍生物,基结构通过IR,1HNMR,元素分析和X-射线单晶衍射法确定。X射线衍射单晶结构分析表明,固态时标题化合物通过分子间氢键形成一维无限链状结构,这些一维无限链状结构又通过链与链间的苯并咪唑环的π-π堆积作用形成二维结构。标题化合物的晶体属单斜晶系,P21/c空间群;Mr:568.54,a=19.821(3),b=7,.4501(11),c=20.093(3),β=116.479(3),°v=2655.8(3)3,z=4,Dc=1.422 mg.m-3,F(000)=1200,最终偏离因子R=0.0675,wR=0.2187。     

含苯并咪唑基配体Zn(Ⅱ)、Cd(Ⅱ)配位聚合物的合成、结构以及荧光性质研究(英文)

以3,5-二(苯并咪唑基)吡啶(L)、间苯二甲酸(m-H2BDC)、4-羧基肉桂酸(H2CCA)、ZnSO4·7H2O和Cd(NO3)2·4H2O为原料,使用溶剂热方法合成了两个配位聚合物[Zn(L)(m-BDC)](1)和[Cd(L)(CCA)]·2H2O(2),利用红外、元素分析、热重分析和X-射线粉末衍射对其进行了表征,利用X-射线单晶衍射对结构进行了测定,并研究了配合物的荧光性质。在配合物1中,L与金属离子连接形成了一维(1D)链结构,而间苯二甲酸根离子与金属离子构成了一个M2(m-BDC)2(M=金属离子)的单元。一维链之间通过M2(m-BDC)2单元连接形成二维网状(2D)结构。在配合物2中,和配合物1类似,L与金属离子连接形成一维链,但与1不同的是羧酸配体与金属离子配位也构成了一维链结构,两种一维链通过配位作用连接构成二维结构。     

Iodination of cisplatin adduct of Vitamin B12 [{B12}-CN-{cis-PtCl(NH3)2}]

The cisplatin adduct of vitamin B₁₂, [{B₁₂}-CN-{cis-PtCl(NH₃)₂}]⁺ (1), reacts with iodide in aqueous solution to form [{B₁₂}-CN-{trans-PtI₂(NH₃)}] (3) in good yield. Mono-substitution of chloride was not observed since a subsequent replacement of one NH₃ by a second iodide is very fast as compared to the Cl⁻ → I⁻ exchange. The same reaction conditions allowed to introduce radioiodide ¹³¹I. Vitamin B₁₂ can therefore be labeled with radionuclides via binding to the Pt(II) center.     

Synthesis, structure and properties of the Cp2Zr{CH(SiMe3)2} cation

The generation and properties of the Cp₂Zr{CH(SiMe₃)₂}⁺ cation are described. An X-ray crystallographic analysis shows that the carborane salt [Cp₂Zr{CH(SiMe₃)₂}][HCB₁₁Me₅Br₆] contains an agostic Zr-μ-Me-Si interaction in the solid state. Low temperature NMR spectra of the borate salt [Cp₂Zr{CH(SiMe₃)₂}][B(C₆F₅)₄] show that this interaction is retained in solution. Variable temperature NMR spectra establish that the SiMe₂(μ-Me) and unbound SiMe₃ units of Cp₂Zr{CH(SiMe₃)₂}⁺ exchange by a “pivot” process involving partial rotation around the Zr-CH(SiMe₃)₂ bond, with a barrier of ΔG^‡ = 9.2(1) kcal/mol at −89 °C. Cp₂Zr{CH(SiMe₃)₂}⁺ does not coordinate alkenes or alkynes.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Expanding the Hierarchy of Metal-Oxide Building Blocks from Fragments via Clusters to Networks: A ∞2 [({Mo17(NO)2}3{MoV2}3{FeIII}6)(FeII1.5)]-Type Layer Compound

A planar network consisting of {Mo₁₇(NO)₂}₃{Mo^V ₂}₃{Fe₆^III} cluster entities that are interlinked to layers via {Fe^II(H₂O)₄}²⁺ groups is formed stepwise from building units. The corresponding mixed-valence compound exhibits a variety of different formal oxidation states: {MoNO}³⁺, Mo^V, Mo^VI, Fe^II, and Fe^III. This compound also represents an extension of building-block hierarchy from the molecular level to extended networks.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Low-Lying Isomers of (TiO\begin{document}$_{2}$\end{document})\begin{document}$_{n}$\end{document} (\begin{document}${n}$\end{document}=2-8) Clusters

Although there are diverse bond features of Ti and O atoms, so far only several isomers have been reported for each (TiO\begin{document}$_2$\end{document})\begin{document}$_n$\end{document} cluster. Instead of the widely used global optimization, in this work, we search for the low-lying isomers of (TiO\begin{document}$_2$\end{document})\begin{document}$_n$\end{document} (\begin{document}$n$\end{document}=2\begin{document}$-$\end{document}8) clusters with up to 10000 random sampling initial structures. These structures were optimized by the PM6 method, followed by density functional theory calculations. With this strategy, we have located many more low-lying isomers than those reported previously. The number of isomers increases dramatically with the size of the cluster, and about 50 isomers were found for (TiO\begin{document}$_2$\end{document})\begin{document}$_7$\end{document} and (TiO\begin{document}$_2$\end{document})\begin{document}$_8$\end{document} with the energy within kcal/mol. Furthermore, new lowest isomers have been located for (TiO\begin{document}$_2$\end{document})\begin{document}$_5$\end{document} and (TiO\begin{document}$_2$\end{document})\begin{document}$_8$\end{document}, and isomers with three terminal oxygen atoms, five coordinated oxygen atoms as well as six coordinated titanium atoms have been located. Our work highlights the diverse structural features and a large number of isomers of small TiO\begin{document}$_2$\end{document} clusters.     

3D Macro-Micro-Mesoporous FeC\begin{document}$_{2}$\end{document}O\begin{document}$_{4}$\end{document}/Graphene Hydrogel Electrode for High-Performance 2.5 V Aqueous Asymmetric Supercapacitors

Distinguished from commonly used Fe\begin{document}$_2$\end{document}O\begin{document}$_3$\end{document} and Fe\begin{document}$_3$\end{document}O\begin{document}$_4$\end{document}, a three-dimensional multilevel macro-micro-mesoporous structure of FeC\begin{document}$_2$\end{document}O\begin{document}$_4$\end{document}/graphene composite has been prepared as binder-free electrode for supercapacitors. The as-prepared materials are composed of macroporous graphene and microporous/mesoporous ferrous oxalate. Generally, the decomposition voltage of water is 1.23 V and the practical voltage window limit is about 2 V for asymmetric supercapacitors in aqueous electrolytes. When FeC\begin{document}$_2$\end{document}O\begin{document}$_4$\end{document}/rGO hydrogel was used as the negative electrode and a pure rGO hydrogel was used as the positive electrode, the asymmetrical supercapacitor voltage window raised to 1.7 V in KOH (1.0 mol/L) electrolyte and reached up to 2.5 V in a neutral aqueous Na\begin{document}$_2$\end{document}SO\begin{document}$_4$\end{document} (1.0 mol/L) electrolyte. Correspondingly it also exhibits a high performance with an energy density of 59.7 Wh/kg. By means of combining a metal oxide that owns micro-mesoporous structure with graphene, this work provides a new opportunity for preparing high-voltage aqueous asymmetric supercapacitors without addition of conductive agent and binder.     

Redox behavior of $${\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }$$ as a simulant of $${\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }$$NpO2+/NpO22+ in boiling nitric acid solution

To evaluate the redox behavior of \({\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }\) as a simulant of \({\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }\) in boiling nitric acid solution, i.e., typical operating conditions for nuclear fuel reprocessing plants, oxidation rate measurements for VO²⁺ in boiling and non-boiling nitric acid solutions, thermodynamic calculations, and kinetic calculations were performed. The results indicated that the apparent oxidation rate of VO²⁺ to \({\text{VO}}_{2}^{ + }\) is accelerated by a decrease in \({\text{NO}}_{2}^{ - }\) and HNO₂ concentrations owing to the boiling phenomena of nitric acid solution.     

Theoretical Study of Hydrogen-Bond Interactions of CO\begin{document}$ _\textbf{2} $\end{document} in Organic Absorbent 1, 3-Diphenylguanidine

Carbon capture and storage technology have been rapidly developed to reduce the carbon dioxide (CO\begin{document}$ _2 $\end{document}) emission into the environment. It has been found that the amine-based organic molecules could absorb CO\begin{document}$ _2 $\end{document} efficiently and form the bicarbonate salts through hydrogen-bond (H-bond) interactions. Recently, the aqueous 1, 3-diphenylguanidine (DPG) solution was developed to trap and convert CO\begin{document}$ _2 $\end{document} to valuable chemicals under ambient conditions. However, how the DPG molecules interact with CO\begin{document}$ _2 $\end{document} in an aqueous solution remains unclear. In this work, we perform molecular dynamics simulations to explore the atomistic details of CO\begin{document}$ _2 $\end{document} in the aqueous DPG. The simulated results reveal that the protonated DPGH\begin{document}$ ^+ $\end{document} and the bicarbonate anions prefer to form complexes through different H-bond patterns. These double H-bonds are quite stable in thermodynamics, as indicated from the accurate density functional theory calculations. This study is helpful to understand the catalytic mechanism of CO\begin{document}$ _2 $\end{document} conversion in the aqueous DPG.