L–H power threshold studies with tungsten/carbon divertor on the EAST tokamak

The power threshold for low (L) to high (H) confinement mode transition achieved by radio-frequency heating and molybdenum first wall with lithium coating has been experimentally investigated on the EAST tokamak for two sets of divertor geometries and materials: tungsten/carbon divertor and full carbon divertor. For both sets of divertors, the power threshold was found to decrease with gradual accumulation of the lithium wall coating, suggesting the important role played by the low Z impurities and/or the edge neutral density on the L–H power threshold. When operating in the upper single null configuration, with the ion grad-B drift direction away from the primary X-point, a lower normalized power threshold is observed in EAST with the tungsten/carbon divertor, compared to the carbon divertor after intensive lithium wall coating. A newly installed cryopump increasing the pumping efficiency also plays an important part in the observed lower threshold. In addition, the H-mode in the Quasi-Snowflake divertor configuration has been obtained on EAST, exhibiting higher L–H power threshold compared to the lower single null configuration with similar I_P/B_T pairs.     

Electron cooling in three‐dimensional Dirac fermion systems at low temperature: Effect of screening

Hot electron cooling rate P, due to acoustic phonons, is investigated in three‐dimensional Dirac fermion systems at low temperature taking account of the screening of electron–acoustic phonon interaction. P is studied as a function of electron temperature T_e and electron concentration n_e. Screening is found to suppress P very significantly for about T_e < 0.5 K and its effect reduces considerably for about T_e > 1 K in Cd₃As₂. In Bloch–Grüneisen (BG) regime, for screened (unscreened) case the T_e dependence is P ～ T_e⁹(T_e⁵) and the n_e dependence gives P ～ n_e^–5/3 (n_e^–1/3). The T_e dependence is characteristic of 3D phonons and n_e dependence is characteristics of 3D Dirac fermions. The plot of P /T_e⁴ vs. T_e shows a maximum at temperature T_em which shifts to higher values for larger n_e. Interestingly, the maximum is nearly same for different n_e and T_em/n_e^1/3 being nearly constant. More importantly, we propose, the n_e dependent measurements of P would provide a clearer signature to identify 3D Dirac semimetal phase. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Optical Emission Diagnostics of an U-Shaped Argon Stabilized d.c. Arc

The radial distribution of parameters has been measured by using the optical emission spectroscopy of an U-shaped argon stabilized low current arc at atmospheric pressure. All the measurements reported here were performed from a side-on observation direction by applying the Abel inversion routine. Radial distributions of apparent temperatures (T_exc., T_e, T_i, T_g) and of electron number density (n_e) for the plasma were measured, with and without presence of KCl (spectrochemical buffer). The measured data of n_e are compared to the theoretically calculated values of the equilibrium plasma composition. On the basis of the measured data, the validity of LTE concept is considered. It was found that deviation from LTE increases to the plasma periphery.     

Plasma parameters in the upgraded Trimyx-M Galathea

Results are presented from measurements of the plasma parameters in the upgraded Trimyx-M Galathea. After the barrier magnetic field and the energy of the injected hydrogen plasma bunch were increased to B _bar ∼ 0.1 T and W ₀ ≈ 200 J, respectively, the following plasma parameters were achieved: the density n ∼ 5 × 10¹³ cm⁻³, the plasma confinement time τ* = 800–900 μs, the elergy of the confined plasma W ₁ ∼ 100 J, the ratio of the plasma pressure to the barrier magnetic pressure β ₀ ∼ 0.2, the electron temperature T _e ∼ 20 eV, and the ion temperature T _i ∼ 2T _e . The maximum time during which the plasma density decreased e-fold, τ _p , was found to be 300 μs at B _bar = 0.1 T, which agrees with the classical transport model.     

Measurements of Flow Velocity in the Plasma Generator PSI‐2

The plasma flow velocity in the Plasma Generator PSI‐2 has been investigated by using of Mach probe. PSI‐2 is a stationary high‐current arc discharge in which the quasi‐neutral plasma expands along the magnetic field lines. The low‐temperature (T_e < 20 eV), medium density (n_e ∼ 10¹⁸— 10¹⁹ m^—3 ) plasma in the discharge is similar to the plasma in the divertor region of tokamaks. From the ratio of ion saturation currents collected from opposite sides of the probe the flow velocities (Mach numbers) in argon and hydrogen discharges are obtained.     

Investigation of the Plasma of a Magnetron Discharge during Titanium Deposition

In the present work the deposition of titanium layers using a planar-magnetron sputtering system is performed. To optimize the sputtering process and to improve the layer quality the plasma has been monitored in front of the target and near the substrate. The plasma was studied by means of Langmuir-probe diagnostics and optical emission spectroscopy (OES). The internal plasma parameters (n_e, k_B T_e) and the relative power dependence of the neutral densities (n_Ti) at the target as well as at the substrate have been determined as functions of discharge power and pressure. It was found that the plasma densities increase with power and pressure and reach a maximum at a certain gas pressure (0.8 Pa) connected with a maximum of the energy influx and a maximum of the mass density of the deposited films.     

Initiation and Sustainment of Unipolar Arc Discharges by a Microsecond Pulse Plasma

Unipolar arcs have been produced by contacting metal surfaces with microsecond pulse plasmas. Plasma temperature T_e, density n_e and potential (with respect to ground) were controlled in the limits 7–12 eV, 10¹⁸–10¹⁹ m^?3, 20–40 V, respectively, and the influence of these parameters on arc current amplitude (50–500 A) and ignition probability has been investigated. It was found that the ignition is the most limiting process requiring surface contaminations as well as the transport of net currents to the surface. The amplitude of the current was proportional to n_eT_e^1/2.     

Influence of Plasma Resistance and Fluctuation on Probe Characteristics in Detached Recombining Plasmas

In order to find the causes of the strong anomaly of current‐voltage characteristics of Langmuir probe observed in detached recombining plasmas in a linear divertor plasma simulator, NAGDIS‐II, we have investigated plasma resistance along a magnetic field and potential fluctuations in the detached recombining plasmas. Simple calculation on the ratio between the plasma length, at which plasma resistance and resistance of ion sheath formed around a probe tip become equal, and an electron collection length indicates that the evaluation of electron temperature T_e becomes inaccurate at T_e of less than 0.6 eV when plasma density and neutral pressure are 1.0 × 10¹⁸ m^—3 and 10 mtorr, respectively. The potential fluctuation in detached recombining plasmas was found to be so large compared to T_e/e, which can also modify the probe characteristics.     

Density and impurity profile behaviours in HL-2A tokamak with different gas fuelling methods

The electron density profile peaking and the impurity accumulation in the HL-2A tokamak plasma are observed when three kinds of fuelling methods are separately used at different fuelling particle locations. The density profile becomes more peaked when the line-averaged electron density approaches the Greenwald density limit n_G and, consequently, impurity accumulation is often observed. A linear increase regime in the density range n_e< 0.6n_G and a saturation regime in n_e > 0.6n_G are obtained. There is no significant difference in achieved density peaking factor f_ne between the supersonic molecular beam injection (SMBI) and gas puffing into the plasma main chamber. However, the achieved f_ne is relatively low, in particular, in the case of density below 0.7n_G, when the working gas is puffed into the divertor chamber. A discharge with a density as high as 1.2n_G, i.e. n_e = 1.2n_G, can be achieved by SMBI just after siliconization as a wall conditioning. The metallic impurities, such as iron and chromium, also increase remarkably when the impurity accumulation happens. The mechanism behind the density peaking and impurity accumulation is studied by investigating both the density peaking factor versus the effective collisionality and the radiation peaking versus density peaking.     

Study of multiple impurity seeding effect using SONIC integrated divertor code for JT-60SA plasma prediction

In order to study the potential impurity seeding operation regime of the future fusion devices, the first application of the integrated divertor code SONIC to the Ar + Ne mixed-impurity seeding operation of JT-60SA steady-state high-β plasma has been carried out. In the case, Ne is added to Ar-only seeding, the separatrix electron density has fell into the desired low separatrix electron density of the scenario. This is mainly because the D⁺ flow velocity towards the inner divertor has been increased by the Ne seeding. The resultant friction force transports Ar impurities towards the inner divertor region, while impurities are stagnated in the top of scrape-off layer (SOL) in the Ar-only seeding case. The higher impurity radiation power in the divertor regions and lower one in the SOL region above the X point have been obtained in mixed-impurity seeding cases, which show similar tendency as the Ar + Ne mixed-impurity seeding experiment in JT-60 U. At the core edge, Z_eff has been slightly increased and the radiation power has been decreased as the Ne seeding rate increases. The core plasma/impurity transport has been also evaluated by the TOPICS code using the impurity density at the core edge computed by the SONIC as a boundary parameter. The results show lower Z_eff and radiation power, and higher electron temperature in the core in the mixed-impurity seeding cases. Above possible contributors to the better energy confinement indicate that the mixed-impurity seeding operation might be more effective than Ar-only seeding operation.     

Emission Spectroscopic Investigation of the Decomposition of CCl4 in Plasma Etching Processes

The CCl₄ plasma decomposition and the etching of SiO₂ and Al by the CCl₄ plasma is investigated with the aid of emission intensity Iλ of such species as Cl₂, CCl, Cl and CO, which are influenced systematically by the etching process. A time independent electron density (n_e ≈ 2 · 10⁸ ?1 · 10¹⁰ cm^?3, dependent on plasma conditions) is measured by microwave diagnostics. The ratio Iλ/n_e and Iλ/I_reference' resp. (I_reference = I_Helium) is a relative measure of concentrations. The ratio I_cl2/I_ccl is very sensitive against CCl₄-decomposition and etching processes of SiO₂ and Al. Its changes during the etching process of SiO₂ and Al in a CCl₄ plasma are investigated.     

Optical Emission Spectroscopy Used to Study the Characteristics of the Capacitive Radio-Frequency Discharge in Argon

Capacitively coupled radio-frequency (13.56 MHz) glow discharge in argon at low pressure (200 mTorr) has been studied by optical emission spectroscopy (OES) and electrical probe. Increasing power density resulted in lowering of the electron temperature T _e and increase of the electron density n _e. The to transition in this case takes place smoothly. The intensity (I _750.4) of the emission line at 750.4 nm due to 2p₁1s₂ transition closely follows the variation of n _e with power density. Calculation of the electron-energy probability function shows that electron occupation mainly changes in the high-energy tail, which explains close resemblance of I _750.4 to n _e. At moderate pressures, only OES method was applied to observe - transition which is abrupt in this pressure range.     

The gauge transformation of the modified KP hierarchy

In this paper, we firstly investigate the successive applications of three elementary gauge transformation operators T_i with i = 1,2,3 for the mKP hierarchy in Kupershmidt-Kiso version, and find that the gauge transformation operators T_i can not commute with each other. Then two types of gauge transformation operators T_D and T_I constructed from T_i are proved that they can commute with each other. In particular, T_I is introduced for the first time in the literature. And the successive applications of T_D and T_I in the form of T^(n,k), which is the product of n terms of T_D and k terms of T_I, are derived in three cases for different n and k. At last, the corresponding successive applications of T_D and T_I on the eigenfunction Φ, the adjoint eigenfunction Ψ and the tau functions τ₀ and τ₁ are considered.     

Three-particle recombination coefficient of a weakly nonideal ultracold plasma in a high magnetic field

An expression for the recombination coefficient α _B in a weakly nonideal ultracold plasma in a high magnetic field has been proposed. According to this expression, α _B ∼ T _e ^−1.5 B ⁻², where T _e is the temperature of electrons and B is the strength of the magnetic field. Comparison of calculated values with experimental data including the results of the recent experiments on recombination in antihydrogen confirms the theoretical dependence.     

Condition for adiabatic passage in the earth’s-field NMR technique

The equation of motion dM/dt=γ M×B(t) is solved for the case B(t)=jB_p(t)+kB_e. The field B_e is a small static field, typically the earth’s field. The field B_p(t) decays exponentially toward zero with time constant T. This decay is produced by an overdamped switching transient that occurs near the end of the rapid cutoff of the coil current used to polarize the sample. It is assumed that B_p is initially large compared to B_e, and that magnetization M is initially along the resultant field B. Exact solutions are obtained numerically for several decay time constants of B_p, and the motion of M is depicted graphically. It is found that for adiabatic passage, the final cone angle β of the precession in field B_e is related to the decay time constant of B_p by β=2e^{−(π/2)ω_eT}. This is confirmed by measurements of the amplitudes of the ensuing free-precession signals for various decay rates of B_p. Near-perfect adiabatic passage (magnetization aligned within 2° of the earth’s field) can be achieved for time constants T2.6/ω_e. For the case of sudden passage, an approximate analytic solution is developed by linearizing the equation of motion in the laboratory frame of reference. For the adiabatic case, an approximate analytic solution is obtained by linearizing the equation of motion in a rotating frame of reference that follows the resultant field B=B_p+B_e.     

One-dimensional configuration sums in vertex models and affine Lie algebra characters

We study the local state probabilities of the vertex models in the face formulation associated with the simple Lie algebras X _n =A _n, B _n, C _n, D _n. The corner transfer matrix method expresses them in terms of one-dimensional configuration sums. We show that the latter are the string functions of X _n ⁽¹⁾ modules. We also present similar results for the restricted face models of types B _n ⁽¹⁾, C _n ⁽¹⁾, D _n ⁽¹⁾.     

Electron temperature (T e) measurements by Thomson scattering system

Thomson scattering technique based on high power laser has already proved its superoirity in measuring the electron temperature (T _e and density (n _e) in fusion plasma devices like tokamaks. The method is a direct and unambiguous one, widely used for the localised and simultaneous measurements of the above parameters. In Thomson scattering experiment, the light scattered by the plasma electrons is used for the measurements. The plasma electron temperature is measured from the Doppler shifted scattered spectrum and density from the total scattered intensity. A single point Thomson scattering system involving a Q-switched ruby laser and PMTs as the detector is deployed in ADITYA tokamak to give the plasma electron parameters. The system is capable of providing the parameters T _e from 30 eV to 1 keV and n _e from 5 × 10¹²cm⁻³−5 × 10¹³cm⁻³. The system is also able to give the parameter profile from the plasma center (Z=0 cm) to a vertical position of Z=+22 cm to Z=−14 cm, with a spatial resolution of 1 cm on shot to shot basis. This paper discusses the initial measurements of the plasma temperature from ADITYA.     

Spatiotemporal spectroscopic diagnostics of a pulse-periodic strontium vapor laser

Results of spectroscopic investigations into plasma of a pulse-periodic strontium vapor laser operating in the superradiance mode on the infrared transition at λ = 6.45 μm are presented. The method of determining the electron temperature and concentration as well as the gas temperature – T _e , n _e , and T _g – based on measuring the absolute intensities of some SrI and SrII and buffer gas (helium or neon) spectral lines is used. Time dependences of the line intensities during a current pulse (τ = 150 ns) and near afterglow (up to 3 μs) are obtained under conditions of non-equilibrium plasma ionization and recombination. The optical system collects radiation from the entire length of the plasma column by means of separating radial volume zones, includingthe central zone and the zone closer to the walls, with the monochromator slit. The results obtained allow us not only to calculate T _e , n _e , and T _g values, but also to trace the spatiotemporal plasma evolution.     

VUV emission model of REB-heated plasma

VUV emission model of a hygrogen plasma with oxygen impurity (T _e=tens of eV,n _e 10¹⁴–10¹⁶ cm^–3,ⁿimp=1–3 % n_e) is constructed in order to judge different possibilities of plasma diagnostics (especiallyT _e measurements) in the REBEX experiments. Two sets of calculations based on the nonstationary corona model are performed: time dependent continuous and line spectra in the range 5 eV—5 keV in the constantT _e approximation (discussion ofT _e measurements by the filter-method) and time dependent intensities of selected spectral lines (2s-2p type) of ionsO ²⁺–O⁵⁺ at variableT _e (including plasma heating by REB and radiative cooling). A possibility of plasma energy content determination from radiation losses is shown.We would like to acknowledge many helpful discussions with dr. P. unka; we thank also dr. J. Ullschmied for comparing our results with diamagnetic measurements.     

Significance of the Radial Electric Field to Divertor Load Asymmetries

JET divertor load measurements using embedded thermocouples have indicated a large target asymmetry and non-uniformities in the loads and that, under H-mode conditions, the load is dominated by the ion component. ASCOT simulations of the ion contribution to JET divertor loads are consistent with the presence of a large outward radial electric field E _r in the scrape-off layer (SOL) next to the separatrix. Such a field would provide an explanation for observed features of the divertor loads in JET. The required field for getting the correct in/out asymmetry is within the range of the estimated SOL E _r in JET, but reproducing the experimental heat deposition profiles requires higher field values.