High-throughput aided synthesis of the porous metal-organic framework-type aluminum pyromellitate, MIL-121, with extra carboxylic acid functionalization

A new porous metal-organic framework (MOF)-type aluminum pyromellitate (MIL-121 or Al(OH)[H(2)btec]·(guest), (guest = H(2)O, H(4)btec = pyromellitic acid) has been isolated by using a high-throughput synthesis method under hydrothermal conditions. Its structure was determined from powder X-ray diffraction analysis using synchrotron radiation (Soleil, France) and exhibits a network closely related to that of the MIL-53 series. It is a three-dimensional (3D) framework containing one-dimensional (1D) channels delimited by infinite trans-connected aluminum-centered octahedra AlO(4)(OH)(2) linked through the pyromellitate ligand. Here the organic ligand acts as tetradendate linker via two of the carboxylate groups. The two others remain non-bonded in their protonated form, and this constitutes a rare case of the occurrence of both bonding and non-bonding organic functionalities of the MOF family. The non-coordinated -COOH groups points toward the channels to get them an open form configuration. Within the tunnels are located unreacted pyromellitic acid and water species, which are evacuated upon heating, and a porous MIL-121 phase is obtained with a Brunauer-Emmett-Teller (BET) surface area of 162 m(2) g(-1). MIL-121 has been characterized by IR, thermogravimetry (TG) analyses, and solid state NMR spectroscopy employing a couple of two-dimensional (2D) techniques such as (1)H-(1)H SQ-DQ BABA, (1)H-(1)H SQ-SQ RFDR, (27)Al{(1)H} CPHETCOR and (27)Al MQMAS.     

A rationale for the large breathing of the porous aluminum terephthalate (MIL-53) upon hydration

Aluminum 1,4-benzenedicarboxylate Al(OH)[O(2)C-C(6)H(4)-CO(2)]. [HO(2)C-C(6)H(4)-CO(2)H](0.70) or MIL-53 as (Al) has been hydrothermally synthesized by heating a mixture of aluminum nitrate, 1,4-benzenedicarboxylic acid, and water, for three days at 220 degrees C. Its 3 D framework is built up of infinite trans chains of corner-sharing AlO(4)(OH)(2) octahedra. The chains are interconnected by the 1,4-benzenedicarboxylate groups, creating 1 D rhombic-shaped tunnels. Disordered 1,4-benzenedicarboxylic acid molecules are trapped inside these tunnels. Their evacuation upon heating, between 275 and 420 degrees C, leads to a nanoporous open-framework (MIL-53 ht (Al) or Al(OH)[O(2)C-C(6)H(4)-CO(2)]) with empty pores of diameter 8.5 A. This solid exhibits a Langmuir surface area of 1590(1) m(2)g(-1) together with a remarkable thermal stability, since it starts to decompose only at 500 degrees C. At room temperature, the solid reversibly absorbs water in its tunnels, causing a very large breathing effect and shrinkage of the pores. Analysis of the hydration process by solid-state NMR ((1)H, (13)C, (27)Al) has clearly indicated that the trapped water molecules interact with the carboxylate groups through hydrogen bonds, but do not affect the hydroxyl species bridging the aluminum atoms. The hydrogen bonds between water and the oxygen atoms of the framework are responsible for the contraction of the rhombic channels. The structures of the three forms have been determined by means of powder X-ray diffraction analysis. Crystal data for MIL-53 as (Al) are as follows: orthorhombic system, Pnma (no. 62), a = 17.129(2), b = 6.628(1), c = 12.182(1) A; for MIL-53 ht (Al), orthorhombic system, Imma (no. 74), a = 6.608(1), b = 16.675(3), c = 12.813(2) A; for MIL-53 lt (Al), monoclinic system, Cc (no. 9), a = 19.513(2), b = 7.612(1), c = 6.576(1) A, beta = 104.24(1) degrees.     

Crystal structure of [Al4(OH)6(H2O)12][Al(H2O)6]2Br12: a new polyaluminum compound

A vertex-shared tetrahedral [Al(4)(OH)(6)(H(2)O)(12)](6+) (Al(4)) and a disordered [Al(H(2)O)(6)](3+) (Al(1)) that coexist in a 1:2 ratio within each unit cell were observed in the structure of [Al(4)(OH)(6)(H(2)O)(12)][Al(H(2)O)(6)](2)Br(12), which crystallized in a cubic Fd3m space group from a spontaneously hydrolyzed solution of AlBr(3). The former is composed of four AlO(6) octahedra that are connected to each other by sharing three vertexes of each octahedron and form a large regular tetrahedron with ideal T(d) symmetry. The central Al(3+) ion of the latter is coordinated by 6 disordered OH(2) molecules, that form a core-shell structure with ideal D(3d) symmetry.     

Homogeneous forced hydrolysis of aluminum through the thermal decomposition of urea

Homogeneous hydrolysis of aluminum by decomposition of urea in solution was achieved because the urea coordinates to the Al3+ in solution, forming [Al(H2O)5 (urea)]3+ and to a lesser extent [Al(H2O)4 (urea)2]3+. Upon hydrolysis more hydrolyzed monomeric species, [Al(H2O)5 (OH)]2+, [Al(H2O)4 (OH)2]+, [Al(H2O)4 (urea)(OH)]2+, and [Al(H2O)3 (urea)(OH)2]+, were formed, followed by trimeric species and the Al13 Keggin complex [AlO4Al12(OH)24(H2O)12]7+. The 27Al NMR spectra indicated the formation of other complexes in addition to the Al13 at the end of the hydrolysis reaction.     

A ladderlike chain aluminum fluoride ([Al2F8]2-)n with edge-sharing AlF6 octahedra

A new aluminum fluoride, Al(2)F(8).2NC(5)H(6).C(6)H(3)(CO(2)H)(3), was synthesized under mild hydrothermal conditions (200 degrees C, 3 days) in the presence of 1,3,5-benzenetricarboxylic acid (btc) in pyridine/HF (pyr/HF) solvent. Its structure is characterized with single-crystal XRD analysis and high-resolution solid-state NMR. The inorganic framework consists of the corner- and edge-shared connections of AlF(6) octahedra. They are linked via a common edge and form a bioctahedral motif which is trans-connected through the corner-shared fluorine. It results in the formation of an original infinite double file of AlF(6) octahedra running along the a axis. A high-power decoupled MAS (27)Al{(19)F} Hahn echo NMR spectrum allowed us to distinguish the two crystallographic hexacoordinated Al sites. Four unresolved (19)F NMR signals are observed in the MAS spectra to account for the eight crystallographic fluorine atoms. Half of the terminal fluorine sites interact via strong hydrogen bonds with the ammonium groups of the pyridine moieties. The resulting mixed pyridine-fluoroaluminate chains are intercalated by the btc molecules which are hydrogen-bonded to the remaining free terminal fluoride anions through the protonated carboxylic acid function. The (1)H nuclei of both organic molecules are observed in the protonated form.     

Synthesis and characterization of three novel cation-containing (NH4+/C3H7NH3+/NH3+C2H4NH3+) aluminum diphosphonates

Three new aluminum diphosphonates (C(3)H(7)NH(3))[AlF[(HO)O(2)PC(2)H(4)PO(3)]] (1) (orthorhombic, Pnma, a = 8.2048(1) A, b = 6.90056(6) A, c = 19.6598(4) A, Z = 4), (H(3)NC(2)H(4)NH(3))[Al(OH)(O(3)PC(2)H(4)PO(3))] (2) (monoclinic, P2(1)/n, a = 11.142(3) A, b = 7.008(2) A, c = 12.903(5) A, beta = 96.24(7) degrees, Z = 4), and (NH(4))(2)[AlF(O(3)PCH(2)PO(3))] (3) (orthorhombic, Cmcm, a = 16.592(2) A, b = 7.5106(9) A, c = 7.0021(9) A, Z = 4) have been synthesized by solvothermal methods in the presence of linear organic ammonium cations (for 1 and 2) and ammonium cations (for 3) and their structures determined using powder, microcrystal, and single-crystal X-ray diffraction data, respectively. All three materials contain a similar one-dimensional chain motif which is related to that found in the mineral Tancoite. This chain motif consists of corner-sharing octahedra (AlO(4)F(2) for 1 and 3 and AlO(6) for 2) linked together through the bridging CPO(3) tetrahedra of the diphosphonate groups. These chains are unusual in that each diphosphonate moiety acts as a bisbidentate ligand that is coordinated to the same two metal centers through both of the O(3)PC- groups of the diphosphonate ligand. The arrangement of the Tancoite-like chains and charge compensation cations in the structures of compounds 1-3 is seen to be dependent upon the nature of the diphosphonic acid and organoammonium/ammonium cations. Careful selection of these two components may provide a method to design future materials in this system.     

p-Xylene-selective metal-organic frameworks: a case of topology-directed selectivity

Para-disubstituted alkylaromatics such as p-xylene are preferentially adsorbed from an isomer mixture on three isostructural metal-organic frameworks: MIL-125(Ti) ([Ti(8)O(8)(OH)(4)(BDC)(6)]), MIL-125(Ti)-NH(2) ([Ti(8)O(8)(OH)(4)(BDC-NH(2))(6)]), and CAU-1(Al)-NH(2) ([Al(8)(OH)(4)(OCH(3))(8)(BDC-NH(2))(6)]) (BDC = 1,4-benzenedicarboxylate). Their unique structure contains octahedral cages, which can separate molecules on the basis of differences in packing and interaction with the pore walls, as well as smaller tetrahedral cages, which are capable of separating molecules by molecular sieving. These experimental data are in line with predictions by molecular simulations. Additional adsorption and microcalorimetric experiments provide insight in the complementary role of the two cage types in providing the para selectivity.     

Synthesis,structure, and magnetic properties of two new vanadocarboxylates with three-dimensional hybrid frameworks

(V(III)(OH))(2)[C(6)H(2)(CO(2))(4)].4H(2)O (labeled MIL-60) and V(III)(OH)[(2)(O(2)C)C(6)H(2)(COOH)(2)].H(2)O (labeled MIL-61) were hydrothermally synthesized from mixtures of VCl(3), 1,2,4,5-benzenetetracarboxylic acid, and water heated for 3 days at 473 K. The structure of MIL-60 was solved from single-crystal X-ray diffraction data in the triclinic centrosymmetric P1 (No. 2) space group with lattice parameters a = 6.3758(5) A, b = 6.8840(5) A, c = 9.0254(5) A, alpha = 69.010(2) degrees, beta = 85.197(2) degrees, gamma = 79.452(2) degrees, V = 363.53(5) A(3), and Z = 1. The structure of MIL-61 was ab initio determined from an X-ray powder diffraction pattern. MIL-61 crystallizes in the Pnma (No. 62) orthorhombic space group with lattice parameters a = 14.8860(1) A, b = 6.9164(1) A, c = 10.6669(2) A, V = 1098.23(3) A(3), and Z = 4. Both structures contain the same inorganic building block that consists of trans chains of V(III)O(4)(OH)(2) octahedra. The three-dimensional frameworks of MIL-60 and MIL-61 are constituted by the linkage of these chains via the organic molecules so delimiting the channels or cages where the water molecules are encapsulated. The magnetic behavior of these two phases is presented: MIL-60 is paramagnetic, and MIL-61 antiferromagnetically orders below T(N) = 55(5) K.     

Synthesis of MIL-102, a chromium carboxylate metal-organic framework, with gas sorption analysis

A new three-dimensional chromium(III) naphthalene tetracarboxylate, CrIII3O(H2O)2F{C10H4(CO2)4}1.5.6H2O (MIL-102), has been synthesized under hydrothermal conditions from an aqueous mixture of Cr(NO3)3.9H2O, naphthalene-1,4,5,8-tetracarboxylic acid, and HF. Its structure, solved ab initio from X-ray powder diffraction data, is built up from the connection of trimers of trivalent chromium octahedra and tetracarboxylate moieties. This creates a three-dimensional structure with an array of small one-dimensional channels filled with free water molecules, which interact through hydrogen bonds with terminal water molecules and oxygen atoms from the carboxylates. Thermogravimetric analysis and X-ray thermodiffractometry indicate that MIL-102 is stable up to approximately 300 degrees C and shows zeolitic behavior. Due to topological frustration effects, MIL-102 remains paramagnetic down to 5 K. Finally, MIL-102 exhibits a hydrogen storage capacity of approximately 1.0 wt % at 77 K when loaded at 3.5 MPa (35 bar). The hydrogen uptake is discussed in relation with the structural characteristics and the molecular simulation results. The adsorption behavior of MIL-102 at 304 K resembles that of small-pore zeolites, such as silicalite. Indeed, the isotherms of CO2, CH4, and N2 show a maximum uptake at 0.5 MPa, with no further significant adsorption up to 3 MPa. Crystal data for MIL-102: hexagonal space group P(-)6 (No. 169), a = 12.632(1) A, c = 9.622(1) A.     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

Keggin结构阳离子[AlO4Al12(OH)24(H2O)12]7+与杂多阴离子构筑的新型无机纳米簇凝胶

多金属氧酸盐（Polyoxometalates POMs）化学已成为材料科学、医学、催化及光化学等诸多领域的活跃研究课题[1～5]。     

Characteristics and formation of [AlO_4Al_(12)(OH)_(24)(H_2O)_(12)]~(7+) in electrolysis process

[AlO4Al12(OH)24(H2O)12] + (Al13) formation in electrolysis process is studied. The results detected by27Al NMR spectroscopy show that high content of Al13 polymer is formed in the partially hydrolyzed aluminum solution prepared by controlled electrolysis process. In the produced electrolyte of total Al concentration ([AlT]) 2.0 mol · L-1 with a basicity (B = OH/Al molar ratios) of 2.0, the content of Al13 polymer is over 60% of total Al. Dynamic light scattering shows that the size distribution of the final electrolyte solutions ([AlT] = 2.0 mol · L-1) is trimodal with B = 2.0 and bimodal with B = 2.5. The aggregates of Al13 complexes increase the particle size of partially hydrolyzed aluminum solution.     

Facile synthesis of monomeric alumatranes

Alumatranes, tricyclic neutral molecules featuring a transannular N --> Al bond, can act as Lewis acids that activate substrates in the axial coordination site. Treatment of tris(2-hydroxy-3,5-dimethylbenzyl)amine with AlMe(3) afforded dimeric (AlL)(2) 1 [wherein L = tris(2-oxy-3,5-dimethylbenzyl)amine]. X-ray diffraction analysis revealed bridging between AlL monomers by two Al-O bonds. Reactions of 1 with substrates containing O or N donors generated the alumatranes THF-AlL 2, PhCHO-AlL 3, H(2)NCH(2)CH(2)NH(2)-AlL 4, and [PhO-AlL](-) 5, in which the apical added ligand on the five-coordinate aluminum center causes variation in the transannular bond distance. Water coordinates with 1 at -20 degrees C to form the alumatrane H(2)O-AlL 6 that undergoes partial hydrolysis at room temperature to produce 7, which X-ray crystallography showed to be composed of four AlL fragments linked by an (H(2)O)(2)(HO)(2)Al(OH)(2)Al(OH)(2)(H(2)O)(2) framework in which the O(4)AlO(2)AlO(4) moiety is of local D(2)(h)() symmetry. According to X-ray analysis, 7 can crystallize in at least two polymorphic modifications: triclinic 7a and monoclinic 7b. The reaction of 3 with water also generated 6 and 7, depending on the reaction temperature. Dimeric 1 was found to promote the reaction of benzaldehyde with trimethylsilyl cyanide at room temperature to provide 2-trimethylsilyoxyphenylacetonitrile in 95% yield.     

Synthesis and characterization of a new layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O with extra-large 16-rings

A new two-dimensional-layered fluoroaluminophosphate (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O (denoted as AlPO-CJ20) with an Al/P ratio of 4:5 has been synthesized solvothermally by using 2-amino-2-methyl-1-propanol as the structure-directing agent. Its structure was determined by single-crystal X-ray diffraction analysis and further characterized by solid-state NMR techniques, including 27Al, 19F --> 27Al cross-polarization, and 31P magic angle spinning NMR. The alternation of Al-centered tetrahedra (AlO4 and AlO3F) and PO3(=O) tetrahedra gives rise to a new type of 4.6.16-net sheet. The inorganic sheets are stacked in an ABAB sequence along the [010] direction and further held together through strong H bonds between protonated template molecules and P=O groups in the inorganic layers. Except for Mu-4, AlPO-CJ20 is the second layered aluminophosphate with an Al/P ratio of 4:5, and it contains the largest pore opening of 16-rings in the known layered aluminophosphates. Furthermore, the coordination of Al and P of fluoroaluminophosphates is summarized. Crystal data: (C4H11NOH)3.5[Al4(PO4)5F] x 0.5H3O, monoclinic, C2/c (No. 15), a = 32.678(7) A, b = 12.956(3) A, c = 21.045(4) A, beta = 115.17(3) degrees, V = 8064(3) A3, Z = 8, R1 = 0.0837 [I > 2sigma(I)], and wR2 = 0.2428 (all data).     

Investigation of acid sites in a zeotypic giant pores chromium(III) carboxylate

A study of the zeotypic giant pores chromium(III) tricarboxylate Cr(III)3OF(x)(OH)(1-x)(H2O)2 x {C6H3-(CO2)3}2 x nH2O (MIL-100) has been performed. First, its thermal behavior, studied by X-ray thermodiffractometry and infrared spectroscopy, indicates that the departure of water occurs without any pore contraction and no loss in crystallinity, which confirms the robustness of the framework. In a second step, IR spectroscopy has shown the presence of three distinct types of hydroxy groups depending on the outgassing conditions; first, at high temperatures (573 K), only Cr-OH groups with a medium Br?nsted acidity are present; at lower temperatures, two types of Cr-H2O terminal groups are observed; and at room temperature, their relatively high Br?nsted acidity allows them to combine with H-bonded water molecules. Finally, a CO sorption study has revealed that at least three Lewis acid sites are present in MIL-100 and that fluorine atoms are located on a terminal position on the trimers of octahedra. A first result of grafting of methanol molecules acting as basic organic molecules on the chromium sites has also been shown, opening the way for a postsynthesis functionalization of MIL-100.     

Very large breathing effect in the first nanoporous chromium(III)-based solids: MIL-53 or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x [HO(2)C-C(6)H(4)-CO(2)H](x) x H(2)O(y)

The first three-dimensional chromium(III) dicarboxylate, MIL-53as or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)].[HO(2)C-C(6)H(4)-CO(2)H](0.75), has been obtained under hydrothermal conditions (as: as-synthesized). The free acid can be removed by calcination giving the resulting solid, MIL-53ht or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)]. At room temperature, MIL-53ht adsorbs atmospheric water immediately to give Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x H(2)O or MIL-53lt (lt: low-temperature form, ht: high-temperature form). Both structures, which have been determined by using X-ray powder diffraction data, are built up from chains of chromium(III) octahedra linked through terephthalate dianions. This creates a three-dimensional structure with an array of one-dimensional large pore channels filled with free disordered terephthalic molecules (MIL-53as) or water molecules (MIL-53lt); when the free molecules are removed, this leads to a nanoporous solid (MIL-53ht) with a Langmuir surface area over 1500 m(2)/g. The transition between the hydrated form (MIL-53lt) and the anhydrous solid (MIL-53ht) is fully reversible and followed by a very high breathing effect (more than 5 A), the pores being clipped in the presence of water molecules (MIL-53lt) and reopened when the channels are empty (MIL-53ht). The thermal behavior of the two solids has been investigated using TGA and X-ray thermodiffractometry. The sorption properties of MIL-53lt have also been studied using several organic solvents. Finally, magnetism measurements performed on MIL-53as and MIL-53lt revealed that these two phases are antiferromagnetic with Néel temperatures T(N) of 65 and 55 K, respectively. Crystal data for MIL-53as is as follows: orthorhombic space group Pnam with a = 17.340(1) A, b = 12.178(1) A, c = 6.822(1) A, and Z = 4. Crystal data for MIL-53ht is as follows: orthorhombic space group Imcm with a = 16.733(1) A, b = 13.038(1) A, c = 6.812(1) A, and Z = 4. Crystal data for MIL-53lt is as follows: monoclinic space group C2/c with a = 19.685(4) A, b = 7.849(1) A, c = 6.782(1) A, beta = 104.90(1) degrees, and Z = 4.     

Synthesis, crystal structure, and solid-state NMR spectroscopy of a new open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O

A new three-dimensional open-framework aluminophosphate (NH(4))(2)Al(4)(PO(4))(4)(HPO(4)).H(2)O (denoted AlPO-CJ19) with an Al/P ratio of 4/5 has been synthesized, using pyridine as the solvent and 2-aminopyridine as the structure-directing agent, under solvothermal conditions. The structure was determined by single-crystal X-ray diffraction and further characterized by solid-state NMR techniques. The alternation of the Al-centered polyhedra (including AlO(4), AlO(5), and AlO(6)) and the P-centered tetrahedra (including PO(4) and PO(3)OH) results in an interrupted open-framework structure with an eight-membered ring channel along the [100] direction. This is the first aluminophosphate containing three kinds of Al coordinations (AlO(4), AlO(5), and AlO(6)) with all oxygen vertexes connected to framework P atoms. (27)Al MAS NMR, (31)P MAS NMR, and (1)H --> (31)P CPMAS NMR characterizations show that the solid-state NMR techniques are an effective complement to XRD analysis for structure elucidation. Furthermore, all of the possible coordinations of Al and P in the aluminophosphates with an Al/P ratio of 4/5 are summarized. Crystal data: (NH(4))(2)Al(4)(PO(4))(4)(HPO(4))xH(2)O, monoclinic P2(1) (No. 4), a = 5.0568(3) A, b = 21.6211(18) A, c = 8.1724(4) A, beta = 91.361(4) degrees , V = 893.27(10) A(3), Z = 2, R(1) = 0.0456 (I > 2 sigma(I)), and wR(2) = 0.1051 (all data).     

Mixed-ligand coordination polymers from 1,2-bis(1,2,4-triazol-4-yl)ethane and benzene-1,3,5-tricarboxylate: trinuclear nickel or zinc secondary building units for three-dimensional networks with crystal-to-crystal transformation upon dehydration

The hydrothermal reaction of M(NO3)2.6H2O (M = Ni and Zn) with benzene-1,3,5-tricarboxylic acid (H3btc) and 1,2-bis(1,2,4-triazol-4-yl)ethane (btre) produced the mixed-ligand coordination polymers (MOFs) 3 infinity{[Ni3(mu3-btc)2(mu(4)-btre)2(mu-H2O)2]. approximately 22H2O} (1) and 3 infinity{[Zn3(mu4-btc)2(mu4-btre)(H2O)2].2H2O} (3). The compounds, characterized by single-crystal X-ray diffraction, X-ray powder diffraction and thermoanalysis feature trinuclear secondary building units (SBU) within the three-dimensional frameworks. The trinuclear nickel unit in 1 exhibits an intra-trimer together with some weak inter-trimer antiferromagnetic coupling with J = -13.88(8) cm(-1) from the magnetic susceptibility measurement between 1.9-300 K. The zinc coordination polymer 3 shows a strong fluorescence at 423 nm upon excitation at 323 nm (not seen in the free btre ligand). Compound 3 is thermally robust until 200 degrees C (ambient pressure) where loss of the water molecules starts. Careful control of the dehydration procedure (freeze-drying) for 1 and (heating to 280 degrees C) for allowed for a solid-state reaction with single-crystal-to-single-crystal structural transformations in obtaining the largely dehydrated products 3 infinity{[Ni3(mu2-btc)2(mu4-btre)2(mu-H2O)2(H2O)2].4H2O} (2) and 3 infinity{[Zn3(mu6-btc)2(mu4-btre)2]. approximately 0.67H2O} (4), respectively. In the transformation from 1 to 2 the unit cell volume is reduced to about 60%. The transition from 3 to 4 involves breakage and formation of new Zn-O bonds.     

Rational design of the pore system within the framework aluminium alkylenediphosphonate series

We report here on the solvothermal synthesis and crystal structure of the hybrid organic-inorganic framework material Al(2)[O(3)PC(3)H(6)PO(3)](H(2)O)(2)F(2).H(2)O (orthorhombic, Pmmn, a = 12.0591(2) A, b = 19.1647(5) A, c = 4.91142(7) A, Z = 4), the second member of the Al(2)[O(3)PC(n)H(2n)PO(3)](H(2)O)(2)F(2).H(2)O series. The structure consists of corrugated chains of corner-sharing AlO(4)F(2) octahedra in which alternating AlO(4)F(2) octahedra contain two fluorine atoms in a trans or a cis configuration. The diphosphonate groups link the chains together through Al-O-P-O-Al bridges and through the propylene groups to form a three-dimensional framework structure containing a one-dimensional channel system. The linkage of the corrugated inorganic Al-O-P layers within the structure results in the formation of two types of channel that differ in size, shape and composition. The smaller channel is unoccupied; the larger channel is more elongated and contains two extra-framework water molecules per unit cell. A computational investigation into the driving force that controls the stacking arrangement of the Al-O-P inorganic layers within this series of compounds reveals that the stacking is found to be controlled by thermodynamic factors, arising chiefly from the conformation of the organic linker molecule used to connect the inorganic sheets. It is found that the registration of the inorganic layers can be engineered by selecting an appropriate, simple organic spacer or linker alkyl chain, where an even number of carbon atoms in the alkyl chain directs formation of aligned, stacked, inorganic sheets (AAAAAA), and an odd number directs formation of unaligned, stacked sheets (ABABAB) and the formation of one or two channel types in the resultant structure, respectively. This combination of alkyl-chain linkers in conjunction with corrugated inorganic layers is an effective tool to rationally design the pore system of hybrid framework materials.     

2D coordination polymers of macrocyclic oxamide with polycarboxylates: syntheses, crystal structures and magnetic properties

Five new 2D coordination polymers, [Co(nip)(CuL)(H(2)O)]·CH(3)OH (1), [Mn(ip)(NiL)]·0.63H(2)O (2), [Cu(ip)(CuL)] (3), [Mn(6)(CuL)(6)(btc)(4)(H(2)O)(4)]·7H(2)O (4), and [Cu(CuL)(Hbtc)(H(2)O)] (5)(ML, H(2)L = 2,3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-diene; H(2)nip = 5-nitroisophthalic acid; H(2)ip = m-isophthalic acid; H(3)btc = 1,3,5-benzenetricarboxylic acid) have been synthesized by a solvothermal method and characterized by single-crystal X-ray diffraction. Complexes 1-5 exhibit different 2D layered structures formed by Co(2)Cu(2) (1), Mn(2)Ni(2) (2), Cu(4) (3), Mn(3)Ni(3) (4), Cu(4) (5) units, respectively, via the oxamide and diverse carboxylic acid bridges. Compounds 1, 2, 3 and 5 are uninodal 4-connected (4, 4)-grids topology, while complex 4 possesses a 2D network with (3, 4)-connected (4(2).8)(4)(4(3).6(2).8)(3) topology. The results of magnetic determination show pronounced antiferromagnetic interactions in 1-4.