甲基丙烯酸缩水甘油酯与甲基丙烯酸氯乙酯共聚反应竞聚率的研究

本文合成了甲基丙烯酸缩水甘油酯、甲基丙烯酸氯乙酯和甲基丙烯酸缩水甘油酯与甲基丙烯酸氯乙酯共聚物。用~1H-NMR谱仪测定了共聚物中两种单体的含量。用Fineman-Ross和Kelen-Tilds两种作图方法以及最小二乘法对单体的竞聚率进行估假。结果表明了甲基丙烯酸氯乙酯的竞聚率(r_1)和甲基丙烯酸缩水甘油酯的竞聚率(r_2)分别为r_1=0.712,r_2=1.081。     

乙烯基二茂铁、丙烯酰胺和甲基丙烯酸二甲氨基乙酯共聚物的合成及性能研究

以乙烯基二茂铁、丙烯酰胺和甲基丙烯酸二甲氨基乙酯为共聚单体,采用自由基聚合法合成了具有水溶性和氧化还原活性的聚合物,并通过示差扫描量热法、傅里叶红外光谱、紫外-可见吸收光谱,及电化学方法对其玻璃化转变温度、化学组成、质子化作用及电化学性能进行了分析。实验结果表明该共聚物为乙烯基二茂铁、丙烯酰胺和甲基丙烯酸二甲氨基乙酯三元共聚物。该共聚物具有较好的水溶性和柔性,这些特点有利于提高修饰电极电子转移的效率,以及实现酶活性中心与电极之间的直接电子转移。共聚物中的甲基丙烯酸二甲氨基乙酯结构单元在近中性的溶液中可发生质子化作用,可与酶之间形成离子键从而有利于缩短酶活性中心与电极表面之间导电路径。共聚物的电化学性能表现出良好的氧化还原可逆性,且实现了共聚物与电极之间的可逆电子转移。另外该共聚物在溶液中的扩散系数较低,有利于提高修饰电极的稳定性。     

无机盐对氟烷基封端的嵌段共聚物在水相聚集行为的影响

以含氟醇钾盐(NFHO-K )作为引发剂,通过阴离子活性聚合方法合成了氟烷基封端的聚甲基丙烯酸-2-(二甲氨基)乙酯-block-聚甲基丙烯酸-2-(二乙氨基)乙酯嵌段共聚物(NFHO-PDMA-b-PDEA).该共聚物与一般的含氟嵌段共聚物相比,既具有优良的表面活性,又具有较好的溶解性.通过对溶液表面张力的测定,荧光探针法对溶液临界聚集浓度(cac)的测定和透射电子显微镜(TEM)对共聚物在溶液中胶束形态的研究,发现无机盐对共聚物在水溶液中的聚集行为有明显的影响,并可以增强共聚物的表面活性.     

乙烯与甲基丙烯酸二甲氨基乙酯共聚物序列结构与结晶结构关系的研究

乙烯与甲基丙烯酸二甲氨基乙酯共聚物序列结构与结晶结构关系的研究＊陈群罗会浚杨光（华东师范大学分析测试中心上海２０００６２）徐端夫（中国科学院化学所北京１０００８０）关键词乙烯共聚物，高分辨核磁共振，序列结构，最小可结晶序列长度乙烯与甲基丙烯酸二甲氨基...     

含N-苯基马来酰亚胺甲基丙烯酸酯共聚物的合成及其在负性光致抗蚀剂中的应用

以甲基丙烯酸(MAA)、甲基丙烯酸甲酯(MMA)、N-苯基马来酰亚胺(N-PMI)、甲基丙烯酸环己基酯(CHMA)为反应单体,通过自由基共聚合成了一系列共聚物PMMNC,然后与甲基丙烯酸缩水甘油酯(GMA)反应制备了甲基丙烯酸酯共聚物G-PMMNC.利用傅立叶红外光谱(FT-IR)、核磁共振氢谱(¹HNMR)、凝胶渗透色谱(GPC)、差示扫描量热(DSC)等表征了共聚物的结构与性能.随着N-PMI含量的升高,共聚物的分子量增大,玻璃化转变温度升高;以G-PMMNC为基体树脂制备了光致抗蚀剂,考察了光致抗蚀剂的耐酸性和分辨率,研究结果表明,该光致抗蚀剂的耐酸性良好,分辨率为40 μm.     

含碘聚甲基丙烯酸酯类X光显影材料的制备

由甲基丙烯酸正丁酯（BMA）与2-(2'-碘苯甲酰)-O-甲基丙烯酸乙酯(2-IEMA)自由基共聚制备了一种X光显影材料。1H NMR分析表明,该共聚物中2种结构单元之比与投料比吻合。GPC测得该共聚物的分子量随2-IEMA含量增加而降低。DSC分析表明,共聚物的玻璃化转变温度在22.3~28.0 ℃之间,与Fox方程计算值比较接近,而且随2-IEMA含量的增加而升高。TGA测得共聚物的分解温度为250 ℃,具有很好的热稳定性。力学性能测试结果表明,共聚物的拉伸强度随BMA含量的增加而增加,最大拉伸强度可达到7.46 MPa。X光显影性测试表明,该共聚物具有良好的显影性,显影效果随2-IEMA含量增加而增强。     

叔胺铜离子络合物的表征及在铜离子缓释防污涂料中的应用

以五水合硫酸铜和甲基丙烯酸N,N-二甲基氨基乙酯为原料得到络合物,并利用傅里叶红外光谱及核磁共振谱对络合物进行表征.结果表明,铜离子与叔胺基发生配位,测定甲醇溶液中的电导率验证其最大配位数为4.形成的络合物对金属离子的释放具有缓释作用.合成了一系列甲基丙烯酸N,N-二甲基氨基乙酯无规共聚物涂料,结果表明,加入甲基丙烯酸N,N-二甲基氨基乙酯使涂料具有更好的抗菌性能且有助于延长其防污性能.     

主链含酯键的基于聚甲基丙烯酸二甲氨基乙酯的共聚物合成与表征

通过己内酯(CL)和甲基丙烯酸二甲氨基乙酯(DMAEMA)的杂化聚合制备了主链含酯键结构单元的聚甲基丙烯酸二甲氨基乙酯的共聚物,并通过核磁(~1H-NMR)、凝胶渗透色谱(GPC)、示差扫描量热仪(DSC)等对聚合物的结构和性能进行了表征.结果表明,膦腈碱t-Bu P4能高效催化CL和DMAEMA的杂化聚合,得到含CL和DMAEMA 2种结构单元的刺激响应性可降解共聚物.该共聚物只存在一个玻璃化转变温度且共聚物组成与单体投料比接近.GPC数据表明共聚物的数均分子量范围为1.63×10~4~2.47×10~4,分子量分布为2.11~2.54.酯键的引入赋予了聚合物良好的降解性能,同时使其低临界相转变温度(LCST)从52.6℃降到了44.5℃.TEM结果表明得到的共聚物能够在水中形成平均直径约60 nm的胶束.     

pH响应性含氟三嵌段共聚物的制备及性质研究

以苄醇(BzOH)与氢化钾(KH)反应形成的氧阴离子作为引发剂, 依次引发甲基丙烯酸-2-(N,N-二甲氨基)乙酯(DMAEMA, 简称DMA)、甲基丙烯酸-2-(N,N-二乙氨基)乙酯(DEAEMA, 简称DEA)和甲基丙烯酸-(2,2,3,3,4,4,5,5-八氟)戊酯(OFPMA)进行氧阴离子聚合, 获得含氟三嵌段共聚物PDMA-b-PDEA-b-POFPMA和PDEA-b-PDMA-b-POFPMA. 共聚物的化学结构可以通过不同单体的加料顺序和各种单体的投料量加以控制. 通过¹H NMR, ¹⁹F NMR和GPC测试, 研究聚合物的结构、分子量及分子量分布. 利用表面张力、荧光探针法、Zeta电位和透射电镜等测试方法, 研究共聚物在不同pH值的水溶液中的聚集行为.     

两性纤维素接枝共聚物的研究：Ⅰ,两性共聚物的合成

用过硫酸铵和四甲基车胺氧化还原引发体系合成了羧甲基纤维素接枝甲基丙烯酸二甲胺基乙酯两性共聚物（ＣＧＤ）,研究了反应温度、ｐｈ、原料羧甲基取代度,引发剂用量,反应物料配比和外加盐对接枝共聚的影响,并用红外光谱对技枝共聚物结构进行了鉴定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.