Three-dimensional integral imaging with improved visualization using subpixel optical ray sensing

In this Letter, we propose an improved three-dimensional (3D) image reconstruction method for integral imaging. We use subpixel sensing of the optical rays of the 3D scene projected onto the image sensor. When reconstructing the 3D image, we use a calculated minimum subpixel distance for each sensor pixel instead of the average pixel value of integrated pixels from elemental images. The minimum subpixel distance is defined by measuring the distance between the center of the sensor pixel and the physical position of the imaging lens point spread function onto the sensor, which is projected from each reconstruction point for all elemental images. To show the usefulness of the proposed method, preliminary 3D imaging experiments are presented. Experimental results reveal that the proposed method may improve 3D imaging visualization because of the superior sensing and reconstruction of optical ray direction and intensity information for 3D objects.     

Depth-control method for integral imaging

We present a method for controlling the depth of three-dimensional (3D) images reconstructed by integral photography. Incoherent light is reflected from 3D objects, propagates through a lens array, and is captured as the first elemental images by a capturing device. The second elemental images of the 3D images are generated by numerical processing from the first elemental images in accordance with the desired depth. The optical reconstruction of 3D images at the desired depth by the second elemental images is confirmed experimentally.     

Geometric analysis of spatial distortion in projection-type integral imaging

In projection-type integral imaging, positional errors in elemental images and elemental lenses affect three-dimensional (3D) image quality. We analyzed the relationships between the geometric distortion in elemental images caused by a projection lens and the spatial distortion in the reconstructed 3D image. As a result, we clarified that 3D images that were reconstructed far from the lens array were largely affected, and that the reconstructed images were significantly distorted in the depth direction at the corners of the displayed images.     

Computational integral imaging reconstruction scheme of far 3D objects by additional use of an imaging lens

In this paper, we propose a novel performance-enhanced computational integral imaging reconstruction (CIIR) scheme by additional use of an imaging lens. In the proposed scheme, elemental images can be obtained by using a simultaneous pickup scheme of far three-dimensional (3D) objects from the lenslet array in both real and virtual image fields. And additional imaging lens produces an image shift effect of 3D objects located far away from the lenslet array and improve the visual quality of reconstructed images in CIIR by overcoming limitation of pickup range in integral imaging. To show the usefulness of the proposed system, some experiments are carried out for real 3D objects and its results are presented.     

基于螺旋相位调制的非相干全息点扩散函数研究

分析了菲涅耳非相干相关全息(Fresnel incoherent correlation holography,FINCH)系统中纯相位空间光调制器(spatial light modulator,SLM)加载螺旋相位掩模时的点扩散函数.以氙灯为照明光源搭建了FINCH系统,电荷耦合器记录的点源全息图与点扩散函数模拟结果一致.采用该系统分别在SLM上加载双透镜掩模和螺旋相位调制双透镜掩模两种情况下对分辨率板和非染色洋葱细胞成像,给出了成像对比结果.结果表明:采用螺旋相位调制的FINCH系统可以在几乎不牺牲分辨率的情况下提高图像的边缘对比度;同样,对相位物体也可以实现图像的边缘提取和识别.该方法在实时监测活细胞的分裂、形变等方面具有重要应用前景.     

Three-dimensional display with a long viewing distance by use of integral photography

We developed a technique of three-dimensional (3-D) display for distant viewing of a 3-D image without the need for special glasses. The photobased integral photography (IP) method allows precise 3-D images to be displayed at long viewing distances without any influence from deviated or distorted lenses in a lens array. We calculate elemental images from a referential viewing area for each lens and project the corresponding result images to photographic film through each lens. We succeed in creating an image display that appears to have three dimensionality even when viewed from a distance, with an image depth of 5.7 m or more in front of the display and 3.5 m or more behind the display. To the best of our knowledge, the long-distance IP display presented here is technically unique because it is the first report of generation of an image with such a long viewing distance.     

Three-dimensional polarimetric integral imaging

A three-dimensional (3D) polarimetric image sensing and display technique based on integral imaging is proposed. Three-dimensional polarization distribution of reflected light from a 3D object can be measured as elemental image arrays by a rotating linear polarizer. After the measurement of the polarization of the 3D object, the 3D polarimetric object can be reconstructed optically by displaying the polarization-selected elemental images in spatial light modulators with two quarter-wave plates. Experimental demonstration of 3D polarimetric imaging of a 3D object attached to two orthogonal linear polarizers is presented. To the best of our knowledge, this is the first report on 3D polarimetric sensing imaging and 3D optical reconstruction by integral imaging.     

High Optical Magnification Three-Dimensional Integral Imaging of Biological Micro-organism

A high optical magnification three-dimensional imaging system is proposed using an optic microscope whose ocular(eyepiece) is retained and the structure of the transmission mode is not destroyed. The elemental image array is captured through the micro lens array. Due to the front diffuse transmission element, each micro lens sees a slightly different spatial perspective of the scene, and a different independent image is formed in each micro lens channel. Each micro lens channel is imaged by a Fourier lens and captured by a CCD. The design translating the stage in x or y provides no parallax. Compared with the conventional integral imaging of micro-objects, the optical magnification of micro-objects in the proposed system can enhanced remarkably. The principle of the enhancement of the image depth is explained in detail and the experimental results are presented.     

基于立体像素匹配的图像重构技术研究

为了解决目前全景成像技术中分辨率低的问题,提出了一种新的基于3D场景立体像素光线映射的全景图像计算机重构技术.在全景成像技术中,3D场景的每个立体像素点经全景成像系统的编码系统分别映射在一定区域的多个体元素图像的不同像素点上.在计算机重构全景图像时,根据逆光学路径原理,提出了从立体像素映射到的体元素图像区域中提取对应立体像素的多个2D像素点来重构全景图像,使重构的全景图像最大分辨率可达到传统成像方法图像分辨率的N倍（N为映射区域面积）.提出的立体像素的匹配技术大大提高了重构的计算机全景图像分辨率.     

Focusing of electromagnetic waves into a uniaxial crystal

We derive integral representations suitable for studying the focusing of electromagnetic waves through a plane interface into a uniaxial crystal. To that end we start from existing exact solutions for the transmitted fields due to an arbitrary three-dimensional (3D) wave that is incident upon a plane interface separating two uniaxial crystals with arbitrary orientation of the optical axis in each medium. Then we specialize to the case in which the medium of the incident wave is isotropic and derive explicit expressions for the dyadic Green's functions associated with the transmitted fields as well as integral representations suitable for asymptotic analysis and efficient numerical evaluation. Relevant integral representations for focused 3D electromagnetic waves are also given. Next we consider the special case in which (i) the incident field is a two-dimensional (2D) TM wave and (ii) the optical axis in the crystal lies in the plane of incidence, implying that we have a 2D vectorial problem, and derive dyadic Green's functions, integral representations suitable for asymptotic and numerical treatment, and integral representations for focused TM fields. Numerical results for focused 2D TM fields based on these integral representations as well as corresponding experimental results will be presented in forthcoming papers.     

Three-dimensional visualization of objects in scattering medium using integral imaging and spectral analysis

This paper presents a three-dimensional visualization method of 3D objects in a scattering medium. The proposed method employs integral imaging and spectral analysis to improve the visual quality of 3D images. The images observed from 3D objects in the scattering medium such as turbid water suffer from image degradation due to scattering. The main reason is that the observed image signal is very weak compared with the scattering signal. Common image enhancement techniques including histogram equalization and contrast enhancement works improperly to overcome the problem. Thus, integral imaging that enables to integrate the weak signals from multiple images was discussed to improve image quality. In this paper, we apply spectral analysis to an integral imaging system such as the computational integral imaging reconstruction. Also, we introduce a signal model with a visibility parameter to analyze the scattering signal. The proposed method based on spectral analysis efficiently estimates the original signal and it is applied to elemental images. The visibility-enhanced elemental images are then used to reconstruct 3D images using a computational integral imaging reconstruction algorithm. To evaluate the proposed method, we perform the optical experiments for 3D objects in turbid water. The experimental results indicate that the proposed method outperforms the existing methods.     

放疗3D剂量验证系统中光场相机点扩散函数获取

基于闪烁光场成像的放疗新型3D剂量测量中,需利用点扩散函数将每一个二维平面的真实闪烁光数据从重叠图像中提取出来.利用刀口法,结合光场数字重聚焦以及聚焦测距法,实验获取光场相机不同重聚焦位置处的点扩散函数,并给出棋盘格标定板在参数α=0.6时的重聚焦面聚焦在α=0.7位置处的高斯离焦点扩散函数表达式,研究光场相机点扩散函...     

Viewing-angle-enhanced integral imaging by lens switching

In spite of the many advantages of integral imaging, its narrow viewing angle has been a disadvantage. We propose a method to enhance the viewing angle of integral imaging by opening and shutting each lens in the array (i.e., the elemental lenses) sequentially. We prove our idea by using a mask that has a pattern of an on-off vertical array of apertures. Moving the mask prevents the aliasing of a neighboring lens. Thus image overlap or image flipping is reduced and the viewing angle of the system is increased.     

A novel three-dimensional digital watermarking scheme basing on integral imaging

A novel integral imaging-based three-dimensional (3D) digital watermarking scheme is presented. In the proposed method, an elemental image array (EIA) obtained by recording the rays coming from a 3D object through a pinhole array in the integral imaging system is employed as a new 3D watermark. The EIA is composed of a number of small elemental images having their own perspectives of a 3D object, and from this recorded EIA various depth-dependent 3D object images can be reconstructed by using the computational integral imaging reconstruction (CIIR) technique. This 3D property of the EIA watermark can make a robust reconstruction of the watermark image available even though there are some data losses in the embedded watermark by attacks. To show the robustness of the proposed scheme against attacks, some experiments are carried out and the results are discussed.     

Wave aberration function and its definition

A definition of a wave aberration as a phase shift upon composition of light waves in the image of a point is given using the concept of point eikonal. An expression that determines the total differential of a wave aberration function is obtained and the condition of its integrability is determined. The sequence of the wave aberration function definition at the known functions of the meridional and sagittal components of lateral aberration is presented.     

Method for computing the intensity distribution in the image plane of an aberration-free lens with allowance for the wave properties of light

For the Gaussian model of a lens, a Green-function-based method is proposed to compute the intensity distribution in the lens image plane. The method is used to accomplish several test tasks, which include the simulation of the image of a square area, the diffraction by an infinitely long slit, the focusing of a convergent wave with a Gaussian amplitude profile in the focal waist region, and the image of a surface representing an analog of a diffraction grating. After a suitable modification, the method can serve for simulating the propagation of light waves within a real lens and for solving other applied problems.     

基于视差信息的三维图像的计算机重构*

为了解决全景成像技术中观察者位于观察区域之外看到的图像会存在失真的问题,提出了一种基于视差信息的计算机重构3D视图技术.利用3D场景中的物体点经过不同微透镜在元素图像中记录的视差信息,根据光学路径分析,对重构视图中的失真部分用其它元素图像中存在的同一物体点的匹配像素进行替代,从而得到无失真的3D视图.该技术能够在更宽的观察区域内产生3D图像.     

基于视差信息的三维图像的计算机重构

为了解决全景成像技术中观察者位于观察区域之外看到的图像会存在失真的问题,提出了一种基于视差信息的计算机重构3D视图技术.利用3D场景中的物体点经过不同微透镜在元素图像中记录的视差信息,根据光学路径分析,对重构视图中的失真部分用其它元素图像中存在的同一物体点的匹配像素进行替代,从而得到无失真的3D视图.该技术能够在更宽的观察区域内产生3D图像.     

Optical 3D watermark based digital image watermarking for telemedicine

Region of interest (ROI) of a medical image is an area including important diagnostic information and must be stored without any distortion. This algorithm for application of watermarking technique for non-ROI of the medical image preserving ROI. The paper presents a 3D watermark based medical image watermarking scheme. In this paper, a 3D watermark object is first decomposed into 2D elemental image array (EIA) by a lenslet array, and then the 2D elemental image array data is embedded into the host image. The watermark extraction process is an inverse process of embedding. The extracted EIA through the computational integral imaging reconstruction (CIIR) technique, the 3D watermark can be reconstructed. Because the EIA is composed of a number of elemental images possesses their own perspectives of a 3D watermark object. Even though the embedded watermark data badly damaged, the 3D virtual watermark can be successfully reconstructed. Furthermore, using CAT with various rule number parameters, it is possible to get many channels for embedding. So our method can recover the weak point having only one transform plane in traditional watermarking methods. The effectiveness of the proposed watermarking scheme is demonstrated with the aid of experimental results.     

小孔衍射和近场散射数值计算的格林函数方法

从简谐光波满足的亥姆霍兹方程出发,将由格林定理得到的介质分界面上的积分方程转化为以表面上的光波及其导数为未知量的线性方程组,并对其进行数值求解,实现了光场的数值计算。然后将这一方法应用于亚波长尺度的小孔衍射的光波以及自仿射分形表面产生的随机光场及其在近场区域范围内的传播的计算。在随机表面产生的光场计算中．提出了类比推导夫琅禾费面上散斑场自相关函数的方法产生随机表面,以及计算其导数的傅里叶变换方法。对光场的计算结果表明,在近场范围内,光场随离开表面的距离的增加而迅速变化,其传播特性完全不同于光场在远场范围内的传播特性。