SBA-15固定化脂肪酶催化拆分萘普生甲酯水解反应

利用吸附法将柱状假丝酵母菌脂肪酶(Candida rugosa lipase,CRL)固定于SBA-15介孔分子筛上,在搅拌槽反应体系中催化拆分外消旋萘普生甲酯的水解反应,获得了光学纯对映体(S)-萘普生,考察了SBA-15性能和酶固定量对初始反应速率、产量、转化率、对映体过剩(eep)和对映体选择性(E)的影响.结果...     

膜反应器中萘普生甲酯的动态拆分

在碱催化连续原位消旋条件下,利用CRL脂肪酶（Candida rugosa lipase）催化的萘普生甲酯立体选择性水解反应。动态拆分制备（S）－普生。使用硫水硅橡胶膜隔离生物催化拆分反应和碱催化消旋反应,解决了常规动态拆分反应中生物催化剂难以承受原位化学消旋苛刻反应条件的难题。为了利于从水－有机溶剂乳化体系中分离产物和克服产物抑制,将亲水半透膜引入搅拌罐反应器,在该膜反应器中进行动态拆分反应。当转化率超过60％时,产物（S）－萘普生的对映体过量值（eep)仍在96％以上,在反应过程中还发现CRL脂肪酶同工酶的转化。     

脂肪酶催化一步酯化协同拆分合成S-萘普生淀粉酯

利用CRL脂肪酶选择性催化外消旋萘普生甲酯与玉米淀粉进行转酯化反应合成光学纯S-萘普生淀粉酯,同时达到拆分外消旋萘普生的目的.考察了有机溶剂、脂肪酶用量、底物浓度比、反应温度对酯化协同拆分反应的影响,结果表明在异辛烷中脂肪酶CRL可以催化S-萘普生甲酯与淀粉发生转酯化反应同时完成外消旋萘普生的拆分,并且在脂肪酶用量为10%、底物浓度比为1∶3、异辛烷用量为15 m L、反应温度为60℃的条件下反应6d,外消旋萘普生甲酯的转化率为42.5%,产物对映体过量值eep高达99.1%.     

脂肪酶催化一步酯化协同拆分合成S-萘普生淀粉酯前药

利用CRL脂肪酶选择性催化外消旋萘普生甲酯与玉米淀粉进行转酯化反应合成光学纯S-萘普生淀粉酯前药,同时达到拆分外消旋萘普生的目的。考察了有机溶剂、脂肪酶用量、底物浓度比、反应温度对酯化协同拆分反应的影响,结果表明在异辛烷中脂肪酶CRL可以催化S-萘普生甲酯与淀粉发生转酯化反应同时完成外消旋萘普生的拆分,并且在脂肪酶用量为10%、底物浓度比为1:3、异辛烷用量为15mL、反应温度为60℃的条件下反应6d,外消旋萘普生甲酯的转化率为27.2%,产物对应体过量值eep高达99.4%可以作为萘普生的前药进行应用。     

有机溶剂-水双液相体系脂肪酶不对称水解合成S-(+)-萘普生

采用有机溶剂－水双液相体系作为反应介质，并用键合有—Ｃ６Ｈ５的无定型多孔硅胶作为分散剂增大两相间的接触面，用圆柱状假丝酵母脂肪酶对萘普生甲酯进行不对称水解．考察了酶浓度、体系ｐＨ值、温度、分散剂对反应的影响．当转化率为２４．３％时，产品萘普生的对映体过量值（ｅｅ）为９４．９％，剩余底物萘普生甲酯的对映体过量值（ｅｅ）为３０．５％，当以异辛烷作为有机相时，该体系酶催化水解的对映体比率（Ｅ）约为５０．     

有机溶剂—水以液相体系脂肪酶不对称水解合成S—（＋）—萘普生

采用有机溶剂－水双液相体系作为反应介质，并用键合有一Ｃ６Ｈ５的无定型多孔硅胶作为分散在两相间的接触面。用圆柱状假丝酵母脂肪酶对萘普生甲酯进行不对称水解，考察了酶浓度、体系ＰＨ值、温度、分散剂对反应的影响，当转化率为２４．３％时，产品萘普生的对映体守量值为９４．９％，剩余底物萘普生甲酯的对映体过量值为３０．５％，当以异辛烷作为有机相时，该体系酶催化水解的对映体比率约为５０。     

CSTR和批式反应器中酶法拆分萘普生的比较

比较了批式反应器和连续流动搅拌反应器中酶动力学拆分萘普生的不同之处。从宏观反应器平衡角度,推导出了在ＣＳＴＲ中不同于在批式反应器中的酶立体选择性,产物对映体过量值和反应转化率的定量关系式,并通过脂肪酶催化的萘一甲酯的不对称水解反应得到了证实。     

脂肪酶的固定化及其在有机酶促反应中稳定性研究

利用吸附法,将圆柱状假丝酵母脂肪酶固定于４种疏水性不同的载体上,固定化酶的活性及稳定性随载休疏水性的增大而增大。用ＹＧＷ－Ｃ６Ｈ５作为载体,在有机溶剂－水双液相体系中催化萘普生甲酯的不对称水解,反应１２０ｈ转化率为２４．７２％,产品的对映体过量值为９４．８２％。     

水-离子液和水-有机溶剂体系中萘普生酶法拆分的比较研究

在水—有机溶剂和水—离子液两相体系中研究了脂肪酶催化的萘普生甲酯的立体选择性水解反应。考察了转化率，对映体过量值(eep)；(ees)与时间的关系。据此构建了一种可以进行萘普生甲酯立体选择性水解的水—离子液两相体系，在该水—离子液两相体系中酶的活性与传统的水—有机相两相体系相比没有明显的变化，但是酶的立体选择性却明显提高，同时也对水—离子液两相体系中水含量对萘普生甲酯立体选择性水解反应的影响进行了研究，发现在水：离子液(v／v)为1：1时酶的活性和立体选择性最好。     

对萘普生和萘普生甲酯的毛细管电泳手性分离

以磺化β－ＣＤ作为手性分离添加剂,分别对萘普生和萘普生甲酯进行了手性分离研究,当磺化β－ＣＤ的浓度为３．５％（Ｗ／Ｖ）时,萘普生和萘普生甲酯的手性分离度都可大于２,但萘普生与萘普生甲酯不能达到同时拆分。如果同时以磺化β－ＣＤ和ＨＰ－β－ＣＤ作为作为手性分离添加剂,则可对萘普生甲酯达到同时拆分,当磺化β－ＣＤ和ＨＰ－β－ＣＤ的浓度分别为３．５％和１．５％（Ｗ／Ｖ）时,对萘磺生和萘普生甲酯两种消旋体的     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.