A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

Zinc‐Reduced Mesoporous TiOx Li‐Ion Battery Anodes with Exceptional Rate Capability and Cycling Stability

We demonstrate a unique synthetic route for oxygen‐deficient mesoporous TiO_x by a redox–transmetalation process by using Zn metal as the reducing agent. The as‐obtained materials have significantly enhanced electronic conductivity; 20 times higher than that of as‐synthesized TiO₂ material. Moreover, electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) measurements are performed to validate the low charge carrier resistance of the oxygen‐deficient TiO_x. The resulting oxygen‐deficient TiO_x battery anode exhibits a high reversible capacity (～180 mA h g^?1 at a discharge/charge rate of 1 C/1 C after 400 cycles) and an excellent rate capability (～90 mA h g^?1 even at a rate of 10 C). Also, the full cell, which is coupled with a LiCoO₂ cathode material, exhibits an outstanding rate capability (>75 mA h g^?1 at a rate of 3.0 C) and maintains a reversible capacity of over 100 mA h g^?1 at a discharge/charge of 1 C/1 C for 300 cycles.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Biomass‐Derived Porous Carbon with Micropores and Small Mesopores for High‐Performance Lithium–Sulfur Batteries

Biomass‐derived porous carbon BPC‐700, incorporating micropores and small mesopores, was prepared through pyrolysis of banana peel followed by activation with KOH. A high specific BET surface area (2741 m² g^?1), large specific pore volume (1.23 cm³ g^?1), and well‐controlled pore size distribution (0.6–5.0 nm) were obtained and up to 65 wt % sulfur content could be loaded into the pores of the BPC‐700 sample. When the resultant C/S composite, BPC‐700‐S65, was used as the cathode of a Li–S battery, a large initial discharge capacity (ca. 1200 mAh g^?1) was obtained, indicating a good sulfur utilization rate. An excellent discharge capacity (590 mAh g^?1) was also achieved for BPC‐700‐S65 at the high current rate of 4 C (12.72 mA cm^?2), showing its extremely high rate capability. A reversible capacity of about 570 mAh g^?1 was achieved for BPC‐700‐S65 after 500 cycles at 1 C (3.18 mA cm^?2), indicating an outstanding cycling stability.     

Fabrication of Porous Nitrogen‐Doped Carbon Materials as Anodes for High‐Performance Lithium Ion Batteries

The hierarchical porous nitrogen‐doped carbon materials (HNCs) were prepared by using nitrogen containing gelatin as the carbon source and nano‐silica obtained by a simple flame synthesis approach as the template. All of the as‐obtained HNCs show much higher Li storage capacity as compared with commercial graphite. Specifically, HNC‐700 with biggest micropore volume and highest nitrogen content exhibited optimal reversible capacities of 1084 mAh·g^??1 at the current density of 37.2 mA·g^?1 (0.1 C) and 309 mAh·g^?1 even at 3.72 A·g^?1 (10 C). This result suggests that HNCs should be a promising candidate for anode materials in high‐rate lithium ion batteries (LIBs).     

One‐Step Pyro‐Synthesis of a Nanostructured Mn3O4/C Electrode with Long Cycle Stability for Rechargeable Lithium‐Ion Batteries

A nanostructured Mn₃O₄/C electrode was prepared by a one‐step polyol‐assisted pyro‐synthesis without any post‐heat treatments. The as‐prepared Mn₃O₄/C revealed nanostructured morphology comprised of secondary aggregates formed from carbon‐coated primary particles of average diameters ranging between 20 and 40 nm, as evidenced from the electron microscopy studies. The N₂ adsorption studies reveal a hierarchical porous feature in the nanostructured electrode. The nanostructured morphology appears to be related to the present rapid combustion strategy. The nanostructured porous Mn₃O₄/C electrode demonstrated impressive electrode properties with reversible capacities of 666 mAh g^?1 at a current density of 33 mA g^?1, good capacity retentions (1141 mAh g^?1 with 100 % Coulombic efficiencies at the 100^th cycle), and rate capabilities (307 and 202 mAh g^?1 at 528 and 1056 mA g^?1, respectively) when tested as an anode for lithium‐ion battery applications.     

A Long‐Cycling Aqueous Zinc‐Ion Pouch Cell: NASICON‐Type Material and Surface Modification

Aqueous zinc‐ion batteries (ZIBs) have become the highest potential energy storage system for large‐scale applications owing to the high specific capacity, good safety and low cost. In this work, a NASICON‐type Na₃V₂(PO₄)₃ cathode modified by a uniform carbon layer (NVP/C) has been synthesized via a facile solid‐state method and exhibited significantly improved electrochemical performance when working in an aqueous ZIB. Specifically, the NVP/C cathode shows an excellent rate capacity (e. g., 48 mAh g^?1 at 1.0 A g^?1). Good cycle stability is also achieved (e. g., showing a capacity retention of 88% after 2000 cycles at 1.0 A g^?1). Furthermore, the Zn²⁺ (de)intercalation mechanism in the NVP cathode has been determined by various ex‐situ techniques. In addition, a Zn||NVP/C pouch cell has been assembled, delivering a high capacity of 89 mAhg^?1 at 0.2 A g^?1 and exhibiting a superior long cycling stability.     

Lithium Germanate (Li2GeO3): A High‐Performance Anode Material for Lithium‐Ion Batteries

A simple, cost‐effective, and easily scalable molten salt method for the preparation of Li₂GeO₃ as a new type of high‐performance anode for lithium‐ion batteries is reported. The Li₂GeO₃ exhibits a unique porous architecture consisting of micrometer‐sized clusters (secondary particles) composed of numerous nanoparticles (primary particles) and can be used directly without further carbon coating which is a common exercise for most electrode materials. The new anode displays superior cycling stability with a retained charge capacity of 725 mAh g^?1 after 300 cycles at 50 mA g^?1. The electrode also offers excellent rate capability with a capacity recovery of 810 mAh g^?1 (94 % retention) after 35 cycles of ascending steps of current in the range of 25–800 mA g^?1 and finally back to 25 mA g^?1. This work emphasizes the importance of exploring new electrode materials without carbon coating as carbon‐coated materials demonstrate several drawbacks in full devices. Therefore, this study provides a method and a new type of anode with high reversibility and long cycle stability.     

A High‐Voltage and Ultralong‐Life Sodium Full Cell for Stationary Energy Storage

Recently, there has been great interest in developing advanced sodium‐ion batteries for large‐scale application. Most efforts have concentrated on the search for high‐performance electrode materials only in sodium half‐cells. Research on sodium full cells for practical application has encountered many problems, such as insufficient cycles with rapid capacity decay, low safety, and low operating voltage. Herein, we present a layered P2‐Na_0.66Ni_0.17Co_0.17Ti_0.66O₂, as both an anode (ca. 0.69 V versus Na⁺/Na) and as a high‐voltage cathode (ca. 3.74 V versus Na⁺/Na). The full cell based on this bipolar electrode exhibits well‐defined voltage plateaus near 3.10 V, which is the highest average voltage in the symmetric cells. It also shows the longest cycle life (75.9 % capacity retention after 1000 cycles) in all sodium full cells, a usable capacity of 92 mAh g^?1, and superior rate capability (65 mAh g^?1 at a high rate of 2C).     

Compositing Amorphous TiO2 with N‐Doped Carbon as High‐Rate Anode Materials for Lithium‐Ion Batteries

Compositing amorphous TiO₂ with nitrogen‐doped carbon through Ti? N bonding to form an amorphous TiO₂/N‐doped carbon hybrid (denoted a‐TiO₂/C? N) has been achieved by a two‐step hydrothermal–calcining method with hydrazine hydrate as an inhibitor and nitrogen source. The resultant a‐TiO₂/C? N hybrid has a surface area as high as 108 m² g^?1 and, when used as an anode material, exhibits a capacity as high as 290.0 mA h g^?1 at a current rate of 1 C and a reversible capacity over 156 mA h g^?1 at a current rate of 10 C after 100 cycles; these results are better than those found in most reports on crystalline TiO₂. This superior electrochemical performance could be ascribed to a combined effect of several factors, including the amorphous nature, porous structure, high surface area, and N‐doped carbon.     

Realizing Complete Solid‐Solution Reaction in High Sodium Content P2‐Type Cathode for High‐Performance Sodium‐Ion Batteries

P2‐type layered oxides suffer from an ordered Na⁺/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na⁺ extraction/insertion. The deficient sodium in the P2‐type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na⁺ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2‐type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau‐free P2‐type cathode‐Na_0.85Li_0.12Ni_0.22Mn_0.66O₂ (P2‐NLNMO) was developed. The complete solid‐solution reaction over a wide voltage range ensures both fast Na⁺ mobility (10^?11 to 10^?10 cm² s^?1) and small volume variation (1.7 %). The high sodium content P2‐NLNMO exhibits a higher reversible capacity of 123.4 mA h g^?1, superior rate capability of 79.3 mA h g^?1 at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid‐solution reaction are critical to realizing high‐performance P2‐type cathodes for sodium‐ion batteries.     

High Crystalline Prussian White Nanocubes as a Promising Cathode for Sodium‐ion Batteries

Prussian blue and its analogues (PBAs) have been recognized as one of the most promising cathode materials for room‐temperature sodium‐ion batteries (SIBs). Herein, we report high crystalline and Na‐rich Prussian white Na₂CoFe(CN)₆ nanocubes synthesized by an optimized and facile co‐precipitation method. The influence of crystallinity and sodium content on the electrochemical properties was systematically investigated. The optimized Na₂CoFe(CN)₆ nanocubes exhibited an initial capacity of 151 mA h g^?1, which is close to its theoretical capacity (170 mA h g^?1). Meanwhile, the Na₂CoFe(CN)₆ cathode demonstrated an outstanding long‐term cycle performance, retaining 78 % of its initial capacity after 500 cycles. Furthermore, the Na₂CoFe(CN)₆ Prussian white nanocubes also achieved a superior rate capability (115 mA h g^?1 at 400 mA g^?1, 92 mA h g^?1 at 800 mA g^?1). The enhanced performances could be attributed to the robust crystal structure and rapid transport of Na ions through large channels in the open‐framework. Most noteworthy, the as‐prepared Na₂CoFe(CN)₆ nanocubes are not only low‐cost in raw materials but also contain a rich sodium content (1.87 Na ions per lattice unit cell), which will be favorable for full cell fabrication and large‐scale electric storage applications.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

No More HF: Teflon‐Assisted Ultrafast Removal of Silica to Generate High‐Surface‐Area Mesostructured Carbon for Enhanced CO2 Capture and Supercapacitor Performance

An innovative technique to obtain high‐surface‐area mesostructured carbon (2545 m² g^?1) with significant microporosity uses Teflon as the silica template removal agent. This method not only shortens synthesis time by combining silica removal and carbonization in a single step, but also assists in ultrafast removal of the template (in 10 min) with complete elimination of toxic HF usage. The obtained carbon material (JNC‐1) displays excellent CO₂ capture ability (ca. 26.2 wt % at 0 °C under 0.88 bar CO₂ pressure), which is twice that of CMK‐3 obtained by the HF etching method (13.0 wt %). JNC‐1 demonstrated higher H₂ adsorption capacity (2.8 wt %) compared to CMK‐3 (1.2 wt %) at ?196 °C under 1.0 bar H₂ pressure. The bimodal pore architecture of JNC‐1 led to superior supercapacitor performance, with a specific capacitance of 292 F g^?1 and 182 F g^?1 at a drain rate of 1 A g^?1 and 50 A g^?1, respectively, in 1 m H₂SO₄ compared to CMK‐3 and activated carbon.     

Freeze‐Drying‐Assisted Synthesis of Hierarchically Porous Carbon/Germanium Hybrid for High‐Efficiency Lithium‐Ion Batteries

Herein, an approach is reported to prepare porous a carbon/Ge (C/Ge) hybrid. In this hybrid, Ge nanoparticles are closely embedded in a highly conductive and flexible carbon matrix. Such a hybrid features a high surface area (128.0 m² g^?1) and a hierarchical micropore–mesopore structure. When used as an anode material in lithium‐ion batteries (LIBs), the as‐prepared hybrid [C/Ge (60.37 %)] exhibits an improved lithium storage performance with regard to its capacity and rate capability compared to its counterparts. More specifically, it can maintain a specific capacity as high as 906 mAh g^?1 at a high current density of 0.6 A g^?1 after 50 cycles. The excellent lithium storage performance of the C/Ge (60.37 %) sample can be attributed to synergetic effects between the carbon matrix and Ge nanoparticles. The method we adopted is simple and effective, and can be extended to fabricate other nanomaterials.     

Ascorbic Acid‐Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp2‐Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium‐Ion Batteries

Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp²‐coordinated carbon coatings (meso‐Na₃V₂(PO₄)₃/C) were successfully synthesized as efficient cathode material for rechargeable sodium‐ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso‐Na₃V₂(PO₄)₃/C not only delivered good reversible capacity (98 mAh g^?1 at 0.1 A g^?1) and superior rate capability (63 mAh g^?1 at 1 A g^?1) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g^?1). Moreover, the symmetrical sodium‐ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g^?1 with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium‐ion insertion/extraction and their continuous sp²‐coordinated carbon coatings, which facilitate electronic conduction.     

Mesoporous Spherical Li4Ti5O12 as High‐Performance Anodes for Lithium‐Ion Batteries

Porous microspherical Li₄Ti₅O₁₂ aggregates (LTO‐PSA) can be successfully prepared by using porous spherical TiO₂ as a titanium source and lithium acetate as a lithium source followed by calcinations. The synthesized LTO‐PSA possess outstanding morphology, with nanosized, porous, and spherical distributions, that allow good electrochemical performances, including high reversible capacity, good cycling stability, and impressive rate capacity, to be achieved. The specific capacity of the LTO‐PSA at 30 C is as high as 141 mA h g^?1, whereas that of normal Li₄Ti₅O₁₂ powders prepared by a sol–gel method can only achieve 100 mA h g^?1. This improved rate performance can be ascribed to small Li₄Ti₅O₁₂ nanocrystallites, a three‐dimensional mesoporous structure, and enhanced ionic conductivity.     

Reduced Graphene Oxide‐Supported TiO2 Fiber Bundles with Mesostructures as Anode Materials for Lithium‐Ion Batteries

Although the synthesis of mesoporous materials is well established, the preparation of TiO₂ fiber bundles with mesostructures, highly crystalline walls, and good thermal stability on the RGO nanosheets remains a challenge. Herein, a low‐cost and environmentally friendly hydrothermal route for the synthesis of RGO nanosheet‐supported anatase TiO₂ fiber bundles with dense mesostructures is used. These mesostructured TiO₂‐RGO materials are used for investigation of Li‐ion insertion properties, which show a reversible capacity of 235 mA h g^?1 at 200 mA g^?1 and 150 mA h g^?1 at 1000 mA g^?1 after 1000 cycles. The higher specific surface area of the new mesostructures and high conductive substrate (RGO nanosheets) result in excellent lithium storage performance, high‐rate performance, and strong cycling stability of the TiO₂‐RGO composites.     

Template‐Free Synthesis of Hierarchical Vanadium‐Glycolate Hollow Microspheres and Their Conversion to V2O5 with Improved Lithium Storage Capability

Nanosheet‐assembled hierarchical V₂O₅ hollow microspheres are successfully obtained from V‐glycolate precursor hollow microspheres, which in turn are synthesized by a simple template‐free solvothermal method. The structural evolution of the V‐glycolate hollow microspheres has been studied and explained by the inside‐out Ostwald‐ripening mechanism. The surface morphologies of the hollow microspheres can be controlled by varying the mixture solution and the solvothermal reaction time. After calcination in air, hierarchical V₂O₅ hollow microspheres with a high surface area of 70 m² g^?1 can be obtained and the structure is well preserved. When evaluated as cathode materials for lithium‐ion batteries, the as‐prepared hierarchical V₂O₅ hollow spheres deliver a specific discharge capacity of 144 mA h g^?1 at a current density of 100 mA g^?1, which is very close to the theoretical capacity (147 mA h g^?1) for one Li⁺ insertion per V₂O₅. In addition, excellent rate capability and cycling stability are observed, suggesting their promising use in lithium‐ion batteries.