基于鲁棒优化的随机时变网络最优路径研究

交通事故、恶劣天气以及偶发的交通拥堵等都会导致道路交通网络中行程时间的不确定性,极大地影响了道路交通系统的可靠性,同时给日常生活中出行计划的制定以及出行路径的选择带来了不便。因此,本次研究将综合考虑道路交通网络中由于交通流量的全天变化所导致的路径行程时间的时变特征,以及由于事故、天气等不确定因素所导致的路径行程时间的随机特征,并以此作为路网环境的假设条件,对出行路径选择问题进行研究。具体地,首先建立行程时间的动态随机变量,并在此基础上模拟构建了随机时变网络。随后,定义了该网络环境下路径选择过程中所考虑的成本费用,并通过鲁棒优化的方法,将成本费用鲁棒性最强的路径视为最优路径。随后,在随机一致性条件下,通过数学推导证明了该模型可以简化为解决一个确定性时变网络中的最短路径问题。最终,具有多项式时间计算复杂度的改进Dijkstra算法被应用到模型的求解中,并通过小型算例验证模型及算法的有效性。结果表明,本研究中所提出的方法可以被高效率算法所求解,并且不依赖于先验行程时间概率分布的获取,因此对后续的大规模实际城市道路网络应用提供了良好的理论基础。此外,由于具有行程时间随机时变特征的交通网络更接近实际道路情况,因此本次研究的研究成果具有较高的实际意义和应用价值。     

Solving the minimum toll revenue problem in real transportation networks

As a means to relieve traffic congestion, toll pricing has recently received significant attention by transportation planners. Inappropriate use of transportation networks is one of the major causes of network congestion. Toll pricing is a method of traffic management in which traffic flow is guided to proper time and path in order to reduce the total delay in the network. This article investigates a method for solving the minimum toll revenue problem in real and large-scale transportation networks. The objective of this problem is to find link tolls that simultaneously cause users to efficiently use the transportation network and to minimize the total toll revenues to be collected. Although this model is linear, excessive number of variables and constraints make it very difficult to solve for large-scale networks. In this paper, a path-generation algorithm is proposed for solving the model. Implementation of this algorithm for different networks indicates that this method can achieve the optimal solution after a few iterations and a proper CPU time.     

基于双层规划的高速公路收费费率优化模型

在全国联网收费的背景下,从动态收费的角度考虑,建立了双层规划模型,上层规划中将路网管理者作为领导者,以高速公路收费效益最大化为目标函数,同时考虑道路运营管理方的合理收益和养护成本支出情况,下层规划则以用户出行效用最大化为目标,充分考虑了道路使用者的道路选择差异性及道路拥堵对交通分布的影响,建立随机用户均衡模型.最后结合某地区AB地高速公路实际情况进行分析,采用了遗传模拟退火算法验证了模型的实用性,并与其他的算法对比,验证了算法的有效性。研究表明:优化模型可以有效提高高速公路的收费效益和用户的出行效用,可以分散高峰时的交通压力,提升高速公路的通行效率.     

Labeling algorithm for the shortest path problem with turn prohibitions with application to large-scale road networks

In real road networks, the presence of no-left, no-right or no U-turn signs, restricts the movement of vehicles at intersections. These turn prohibitions must be considered when calculating the shortest path between a starting and an ending point in a road network. We propose an extension of Dijkstra’s algorithm to solve the shortest path problem with turn prohibitions. The method uses arc labeling and a network structure with low memory requirements. We compare the proposed method with the dual graph approach in a set of randomly generated networks and Bogotá’s large-scale road network. Our computational experiments show that the performance of the proposed method is better than that of the dual graph approach, both in terms of computing time and memory requirements. We co-developed a Web-based decision support system for computing shortest paths with turn prohibitions that uses the proposed method as the core engine.     

主路多车道无信号交叉口混合交通流的通行能力

Highway capacity is defined as maximum volume of traffic flow through the particular highway section under given traffic conditions,road conditions and so on.Highway construction and management is judged by capacity standard.The reasonable scale and time of highway construction,rational network structure and optimal management mode of highway network can be determined by analyzing the fitness between capacity and traffic volume.All over the world,highway capacity is studied to different extent in different country. Based on the gap acceptance theory,the mixed traffic flow composed of two representative vehicle types heavy and light vehicles is analyzed with probability theory.Capacity model of the minor mixed traffic flows crossing m major lanes,on which the traffic flows fix in with M3 distributed headway,on the unsignalized intersection is set up,and it is an extension of minor lane capacity theory for one vehicle-type and one major-lane traffic flow.     

Dynamic graph generation for the shortest path problem in time expanded networks

In discrete optimization problems the progress of objects over time is frequently modeled by shortest path problems in time expanded networks, but longer time spans or finer time discretizations quickly lead to problem sizes that are intractable in practice. In convex relaxations the arising shortest paths often lie in a narrow corridor inside these networks. Motivated by this observation, we develop a general dynamic graph generation framework in order to control the networks’ sizes even for infinite time horizons. It can be applied whenever objects need to be routed through a traffic or production network with coupling capacity constraints and with a preference for early paths. Without sacrificing any information compared to the full model, it includes a few additional time steps on top of the latest arcs currently in use. This “frontier” of the graphs can be extended automatically as required by solution processes such as column generation or Lagrangian relaxation. The corresponding algorithm is efficiently implementable and linear in the arcs of the non-time-expanded network with a factor depending on the basic time offsets of these arcs. We give some bounds on the required additional size in important special cases and illustrate the benefits of this technique on real world instances of a large scale train timetabling problem.     

带时空相关性分析的行车时间估计模型

基于流体动力学方程的行车时间估计模型不能很好地反映真实的行车时间,需要对其进行一定的改进.在对交通流进行流体动力学建模的基础之上,引入对高速公路路网中不同路段之间的行车时间相关性和同一路段不同季节、不同时段的行车时间相关性分析,建立了带时空相关性分析的时间估计模型,使用统计学的方法消除动力学模型的误差.     

A network traffic flow model for motorway and urban highways

The research reported in this paper develops a network-level traffic flow model (NTFM) that is applicable for both motorways and urban roads. It forecasts the traffic flow rates, queue propagation at the junctions and travel delays through the network. NTFM uses sub-models associated with all road and junction types that comprise the highway. The flow at any one part of the network is obviously very dependent on the flows at all other parts of the network. To predict the two-way traffic flow in NTFM, an iterative simulation method is executed to generate the evolution of dependent traffic flows and queues. To demonstrate the capability of the model, it is applied to a small case study network and a local Loughborough–Nottingham highway network. The results indicate that NTFM is capable of identifying the relationship between traffic flows and capturing traffic phenomena such as queue dynamics. By introducing a reduced flow rate on links of the network, the effects of strategies used to carry out roadworks can be mimicked.     

Using ACCPM in a simplicial decomposition algorithm for the traffic assignment problem

The purpose of the traffic assignment problem is to obtain a traffic flow pattern given a set of origin-destination travel demands and flow dependent link performance functions of a road network. In the general case, the traffic assignment problem can be formulated as a variational inequality, and several algorithms have been devised for its efficient solution. In this work we propose a new approach that combines two existing procedures: the master problem of a simplicial decomposition algorithm is solved through the analytic center cutting plane method. Four variants are considered for solving the master problem. The third and fourth ones, which heuristically compute an appropriate initial point, provided the best results. The computational experience reported in the solution of real large-scale diagonal and difficult asymmetric problems—including a subset of the transportation networks of Madrid and Barcelona—show the effectiveness of the approach.     

A framework for user equilibrium dynamic traffic assignment

Several analytic approaches have been developed to describe or predict traffic flows on networks with time-varying (dynamic) travel demands, flows and travel times. A key component of these models lies in modelling the flows and/or travel times on the individual links, but as this is made more realistic or accurate it tends to make the overall model less computationally tractable. To help overcome this, and for other reasons, we develop a bi-level user equilibrium (UE) framework that separates the assignment or loading of flows on the time–space network from the modelling of flows and trip times within individual links. We show that this model or framework satisfies appropriate definitions of UE satisfies a first-in-first-out (FIFO) property of road traffic, and has other desirable properties. The model can be solved by iterating between (a) a linear network-loading model that takes the lengths of time–space links as fixed (within narrow ranges), and (b) a set of link flow sub-models which update the link trip times to construct a new time–space network. This allows links to be processed sequentially or in parallel and avoids having to enumerate paths and compute path flows or travel times. We test and demonstrate the model and algorithms using example networks and find that the algorithm converges quickly and the solutions behave as expected. We show how to extend the model to handle elastic demands, multiple destinations and multiple traffic types, and traffic spillback within links and from link to link.     

Cognitive and self-selective routing for sensor networks

New approaches to Quality-of-Service (QoS) routing in wireless sensor networks which use different forms of learning are the subject of this paper. The Cognitive Packet Network (CPN) algorithm uses smart packets for path discovery, together with reinforcement learning and neural networks, while Self-Selective Routing (SSR) is based on the “Ant Colony” paradigm which emulates the pheromone-based technique which ants use to mark paths and communicate information about paths between different insects of the same colony (Koenig et al. in Ann Math Artif Intell 31(1–4): 41–76, 2001). In this paper, we present first experimental results on a network test-bed to evaluate CPN’s ability to discover paths having the shortest delay, or shortest length. Then, we present small test-bed experiments and large-scale network simulations to evaluate the effectiveness of the SSR algorithm. Finally, the two approaches are compared with respect to their ability to adapt as network conditions change over time.     

An N-path user equilibrium for transportation networks

The traditional trip-based approach to transportation modeling has been employed for the past decade. The last step of the trip-based modeling approach is traffic assignment, which has been typically formulated as a user equilibrium (UE) problem. In the conventional perspective, the definition of UE traffic assignment is the condition that no road user can unilaterally change routes to reduce their travel time. An equivalent definition is that the travel times of all the used paths between any given origin–destination pair are equal and less than those of the unused paths. The underlying assumption of the UE definition is that road users have full information on the available transportation paths and can potentially use any path if the currently used path is overly congested. However, a more practical scenario is that each road user has a limited path set within which she/he can choose routes from. In this new scenario, we call the resulting user equilibrium an N-path user equilibrium (NPUE), in which each road user has only N paths to select from when making route choices in the network. We introduce a new formulation of the NPUE and derive optimality conditions based on this formulation. Different from traditional modeling framework, the constraints of the proposed model are of linear form, which makes it possible to solve the problem with conventional convex programming techniques. We also show that the traditional UE is a special case of an NPUE and prove the uniqueness of the resulting flow pattern of the NPUE. To efficiently solve this problem, we devise path-based and link-based solution algorithms. The proposed solution algorithms are empirically applied to networks of various sizes to examine the impact of constrained user path sets. Numerical results demonstrate that NPUE results can differ significantly from UE results depending on the number of paths available to road users. In addition, we observed an interesting phenomenon, where increasing the number of paths available to road users can sometimes decrease the overall system performance due to their selfish routing behaviors. This paradox demonstrates that network information should be provided with caution, as such information can do more harm than good in certain transportation systems.     

Application of a simulation-based dynamic traffic assignment model

The evaluation of on-line intelligent transportation system (ITS) measures, such as adaptive route-guidance and traffic management systems, depends heavily on the use of faster than real time traffic simulation models. Off-line applications, such as the testing of ITS strategies and planning studies, are also best served by fast-running traffic models due to the repetitive or iterative nature of such investigations. This paper describes a simulation-based, iterative dynamic equilibrium traffic assignment model. The determination of time-dependent path flows is modeled as a master problem that is solved using the method of successive averages (MSA). The determination of path travel times for a given set of path flows is the network-loading sub-problem, which is solved using the space-time queuing approach of Mahut. This loading method has been shown to provide reasonably accurate results with very little computational effort. The model was applied to the Stockholm road network, which consists of 2100 links, 1191 nodes, 228 zones, representing and 4964 turns. The results show that this model is applicable to medium-size networks with a very reasonable computation time.     

A biased random-key genetic algorithm for road congestion minimization

One of the main goals in transportation planning is to achieve solutions for two classical problems, the traffic assignment and toll pricing problems. The traffic assignment problem aims to minimize total travel delay among all travelers. Based on data derived from the first problem, the toll pricing problem determines the set of tolls and corresponding tariffs that would collectively benefit all travelers and would lead to a user equilibrium solution. Obtaining high-quality solutions for this framework is a challenge for large networks. In this paper, we propose an approach to solve the two problems jointly, making use of a biased random-key genetic algorithm for the optimization of transportation network performance by strategically allocating tolls on some of the links of the road network. Since a transportation network may have thousands of intersections and hundreds of road segments, our algorithm takes advantage of mechanisms for speeding up shortest-path algorithms.     

Finding a minimum cost path between a pair of nodes in a time-varying road network with a congestion charge

The minimum cost path problem in a time-varying road network is a complicated problem. The paper proposes two heuristic methods to solve the minimum cost path problem between a pair of nodes with a time-varying road network and a congestion charge. The heuristic methods are compared with an alternative exact method using real traffic information. Also, the heuristic methods are tested in a benchmark dataset and a London road network dataset. The heuristic methods can achieve good solutions in a reasonable running time.     

Static and Dynamic Path Selection on Expander Graphs: A Random Walk Approach

This paper addresses the problem of virtual circuit switching in bounded degree expander graphs. We study the static and dynamic versions of this problem. Our solutions are based on the rapidly mixing properties of random walks on expander graphs. In the static version of the problem an algorithm is required to route a path between each of K pairs of vertices so that no edge is used by more than g paths. A natural approach to this problem is through a multicommodity flow reduction. However, we show that the random walk approach leads to significantly stronger‐results than those recently obtained by Leighton and Rao [Proc. of 9th International Parallel Processing Symposium, 1995] using the multicommodity flow setup. In the dynamic version of the problem connection requests are continuously injected into the network. Once a connection is established it utilizes a path (a virtual circuit) for a certain time until the communication terminates and the path is deleted. Again each edge in the network should not be used by more than g paths at once. The dynamic version is a better model for the practical use of communication networks. Our random walk approach gives a simple and fully distributed solution for this problem. We show that if the injection to the network and the duration of connection are both controlled by Poisson processes then our algorithm achieves a steady state utilization of the network which is similar to the utilization achieved in the static case situation. ©1999 John Wiley & Sons, Inc. Random Struct. Alg., 14, 87–109, 1999     

Locating Active Sensors on Traffic Networks

Sensors are used to monitor traffic in networks. For example, in transportation networks, they may be used to measure traffic volumes on given arcs and paths of the network. This paper refers to an active sensor when it reads identifications of vehicles, including their routes in the network, that the vehicles actively provide when they use the network. On the other hand, the conventional inductance loop detectors are passive sensors that mostly count vehicles at points in a network to obtain traffic volumes (e.g., vehicles per hour) on a lane or road of the network.This paper introduces a new set of network location problems that determine where to locate active sensors in order to monitor or manage particular classes of identified traffic streams. In particular, it focuses on the development of two generic locational decision models for active sensors, which seek to answer these questions: (1) “How many and where should such sensors be located to obtain sufficient information on flow volumes on specified paths?”, and (2) “Given that the traffic management planners have already located count detectors on some network arcs, how many and where should active sensors be located to get the maximum information on flow volumes on specified paths?”The problem is formulated and analyzed for three different scenarios depending on whether there are already count detectors on arcs and if so, whether all the arcs or a fraction of them have them. Location of an active sensor results in a set of linear equations in path flow variables, whose solution provide the path flows. The general problem, which is related to the set-covering problem, is shown to be NP-Hard, but special cases are devised, where an arc may carry only two routes, that are shown to be polynomially solvable. New graph theoretic models and theorems are obtained for the latter cases, including the introduction of the generalized edge-covering by nodes problem on the path intersection graph for these special cases. An exact algorithm for the special cases and an approximate one for the general case are presented.     

Maximum flow problem on dynamic generative network flows with time-varying bounds

This paper considers a new class of network flows, called dynamic generative network flows in which, the flow commodity is dynamically generated at a source node and dynamically consumed at a sink node and the arc-flow bounds are time dependent. Then the maximum dynamic flow problem in such networks for a pre-specified time horizon T is defined and mathematically formulated in both arc flow and path flow presentations. By exploiting the special structure of the problem, an efficient algorithm is developed to solve the general form of the dynamic problem as a minimum cost static flow problem.     

道路维修施工路段交通分流信控优化模型

针对道路维修施工期间常采用的部分路面封闭施工且利用辅路进行分流的情形,探讨了交通分流信控优化模型。借助交通流波动理论,分析了施工路段及其前后车流拥挤排队及疏散特征和规律,分析了对车流进行控制需满足的约束,并分析了车流的延误计算公式。以总的车辆行驶时间最小化目标,原路径及分流路径的绿时分配及信号周期为优化参数,考虑交通分流控制的各种约束,建立了道路施工路段交通分流信控优化模型。分析了该模型属于非凸问题,因此提出了一种近似求解最优解的办法。通过一个示例对模型和求解算法进行了验证,并对一些规律性结果进行了分析。     

结点有约束的交通网络最短路径模型

结点有约束的网络是一类特殊的网络，如具有禁止通行限制信息的交通路网等，由于最短路径的求解是有后效性的，经典的Dijkstra算法等不能直接用来求解该问题，本文提出了一种结点有约束的交通网络最短路径建模方法，该方法所建模型为一般网络模型，可用任一传统高效的算法求其最短路径，从根本上降低了问题的复杂性，为很好地解决交通、通信等领域中的此类问题提供了有益的方法。