基于周期极化铌酸锂波导的软件同步光采样

随着大于40 Gb/s高速光通信系统的出现, 为了保证光信号传输质量, 需要对光信号进行监测。对于带宽超过传统光电探测器和示波器可测量带宽的高比特率数据光信号, 光采样技术是进行时域测量的重要手段。采用固定频差的方法可以用百兆速率的采样脉冲对高速光信号进行采样, 降低了对采样后电数据处理系统带宽的要求。在对基于周期极化铌酸锂(PPLN)波导中和频效应的采样过程进行建模仿真的基础上, 实现了对Optsim获得的光传输线内10 Gb/s的非归零码(NRZ)和归零码(RZ)信号的采样。采用软件同步算法对采样数据进行处理, 获得信号的眼图, 这一方法可使采样系统对硬件的要求降到最低。与理想与门获得的采样结果进行比较, 对PPLN波导的光采样特性和采样质量进行了分析。     

研制超宽带全光取样示波器设备

全光取样示波器是研究与开发超高速光通信系统和光子交换网络的关键性测试仪器设备. 本文简介了我们自行设计和研制出的超宽带全光取样示波器设备的实验样机系统, 并报道了我们已取得的初步实验结果. 采用自主研发的高稳定性被动锁模飞秒光纤激光器作为该光学示波器的光脉冲取样源, 我们通过利用高度非线性光纤中的四波混频效应, 成功地实现了对脉宽为1.8ps、重复频率分别为10GHz和40GHz的光脉冲信号的全光取样. 然后通过数字信号处理和计算机图形处理, 得到了再现后的超短光脉冲信号波形, 并测出了其脉冲宽度值为2.3ps. 借助于该光学取样示波器实验样机, 我们还成功地完成了对脉宽为1.8ps、经过伪随机数据序列调制后的10Gbit/s和40Gbit/s光数据信号眼图的精确测量. 这是我国首次报道有关超宽带全光取样示波器设备的实际研制工作及其相应的实验测试结果. 所得到的有关超短光脉冲信号波形的测试结果也与用70GHz宽带电子示波器和超快光电探测器组成的常规光电测量系统所获得的结果进行了比较, 清楚地表明了我们研制出的全光取样示波器实验样机比后者具有更高的时间分辨率和更大的测量带宽.     

基于单向注入垂直腔面发射激光器系统的密钥分发

随机源对于信息理论安全的密钥分发至关重要,本文提出了一种基于单向注入垂直腔面发射激光器系统的密钥分发方案.首先基于单向注入的方式产生无时延特征的激光混沌信号,并通过单向注入驱动两个从激光器产生带宽增强的混沌同步信号.然后经过采样、量化以及异或等后处理,生成密钥流.数值仿真结果表明,在单阈值情况下,合法用户之间的误比特率低至1%左右,合法用户与窃听者之间的误比特率都高于10%;在双阈值情况下,误比特率可以低至10^-6.最后,对生成的密钥流进行了NIST随机性测试.该方案有效地增强了密钥分发的安全性.     

基于异步延迟采样的光通信性能监测方法

基于异步延迟采样和人工神经网络统计学习提出了一种光通信性能监测方法。通过对高速光信号进行异步延迟采样,获得信号二维幅度直方图,然后提取其中特征参数并对人工神经网络进行训练,最后以人工神经网络的预测输出实现对光信号损伤的监测。构建10 Gb/s非归零码开关键控,40 Gb/s光学双二进制码和归零码差分移相键控光通信仿真系统,并对光信噪比、色散和偏振模色散损伤进行监测。仿真结果表明,所提方法对被监测光信号的速率、码型调制格式透明,可同时准确监测多种并存的传输损伤,损伤参数监测误差小于5%。该方法具有电域处理带宽要求低、采样机制简单的特点,适用于分布式在线光性能监测。     

Time-resolved chirp measurement for 100GBaud test systems using an ideal frequency discriminator

In this paper we present multi-channel chirp measurements of wide-band sources, using a programmable Fourier-domain optical processor (FDOP) as a near-perfect linear frequency discriminator element followed by a fast photodiode and electrical sampling oscilloscope. The electric field of a 10.7 Gbit/s phase-encoded data source and a directly modulated laser diode are simultaneously interrogated with this measurement system. The constellation diagram of the phase-encoded data source is demonstrated, and a comparison with another phase-sensitive measurement technique is performed. Additionally, an extension to this technique is demonstrated in which the time-resolved chirp of a picosecond-duration mode-locked laser diode with a 260 GHz spectral bandwidth is characterised using the FDOP and a high-bandwidth optical sampling oscilloscope. This measurement ensemble has sufficient temporal resolution to characterise random or repetitive data signals up to 100GBaud.     

Influence of Self-Diffraction Effect on Femtosecond Time-Resolved Single-Shot Optical Kerr Measurements

Femtosecond time-resolved single-shot optical Kerr gating(OKG) measurements are performed by focusing the probe pulse and using a cylindrical lens to introduce a spatially encoded time delay with respect to the pump pulse.By measuring the pump power and polarization dependence of the OKG signals in CS_2,the contribution of self-diffraction effect which is independent of the nonlinear response time of the material is directly observed on the rising edge of the time-resolved OKG signals.The influence of the self-diffraction effect on the optical Kerr signal could be controlled effectively by varying the polarization angle between pump and probe pulses.     

Noninvasive detection of inhomogeneities in turbid media with time-resolved log-slope analysis

Detecting foreign objects embedded in turbid media using noninvasive optical tomography techniques is of great importance in many practical applications, such as in biomedical imaging and diagnosis, safety inspection on aircrafts and submarines, and LIDAR techniques. In this paper we develop a novel optical tomography approach based on slope analysis of time-resolved back-scattered signals collected at the medium boundaries where the light source is an ultrafast, short-pulse laser. As the optical field induced by the laser-pulse propagates, the detected temporal signals are influenced by the optical properties of the medium traversed. The detected temporal signatures therefore contain information that can indicate the presence of an inhomogeneity as well as its size and location relative to the laser source and detection systems. The log-slope analysis of the time-resolved back-scattered intensity is shown to be an effective method for extracting the information contained in the signal. The technique is validated by experimental results and by Monte Carlo simulations.     

基于光子晶体光纤中四波混频效应的单到双非归零到归零码型转换

归零(RZ)码与非归零(NRZ)码是波分复用和时分复用系统中广泛采用的两种码型, 全光NRZ到RZ码型转换能完成从波分复用到时分复用的网络接口功能, 是未来透明光子网络中一项重要的全光信号处理技术. 提出并实验证实了一种基于色散平坦高非线性光子晶体光纤中四波混频效应的单到双NRZ到RZ码型转换方法, 将一束信号光与同步时钟脉冲同时输入色散平坦高非线性光子晶体光纤中, 通过四波混频过程, 产生两个携带该数据信息的闲频光, 从而实现了单到双的NRZ到RZ码型转换功能, 码型转换器工作波长在193 nm范围可调谐, 最大转换效率为-21 dB, 最优消光比和品质因子分别为11.9 dB和7.2. 该方法的特点在于基于光纤中的四波混频效应工作, 因而具有对调制格式和比特率透明的优点, 同时, 光子晶体光纤特有的高非线与色散平坦性, 既避免了使用传统光纤需要较长的长度, 又避免了波长设置不灵活的弊端, 并具备可进一步增加带宽的能力, 且在码型转换的同时, 实现了波长转换, 完成了双通道波长组播功能. 整个系统为全光纤设计, 结构简单, 性能可靠, 并易于与现有的光纤通信系统相容, 对促进超高速大容量光子网络的发展具有重要意义. 关键词： 码型转换 四波混频 光子晶体光纤     

Effect of phase noise on optical minimum-shift keying transmission systems

Phase-modulated (PM) signals have recently been used in long-haul lightwave communication systems to reach record distances. Added directly to the signal phase, linear and nonlinear phase noise cause performance degradation in PM systems. Minimum-shift keying (MSK), as a special format of PM signals, presents some different features of phase noise tolerance. This paper investigates the effect of phase noise on the performance degradation in the 10 Gb/s optical MSK systems and analyzes the contribution of phase noise to the bit error rate (BER), compared with the conventional PM format, 50% duty cycle optical return-to-zero differential phase-shift keying (RZ-DPSK) signals, in several typical local fiber dispersion transmission systems. The effect of intensity noise on the performance degradation in the corresponding transmission systems is also investigated.     

Demonstration of a directed optical encoder using microring-resonator-based optical switches

We propose and demonstrate a directed optical logic circuit that performs the encoding function from a 4 bit electrical signal to a 2 bit optical signal based on cascaded microring switches. The four logic input signals control the states of the switches, while the two logic outputs are given by the optical power at the output waveguides. For proof of concept, a thermo-optic switching effect is used with an operation speed of 10 kbps.     

高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

A novel scheme to implement clock recovery from degraded signals is proposed and demonstrated based on an optoelectronic oscillator and a dual-wavelength mode-locked fiber ring laser with distributed dispersion cavity. The scheme can obtain wavelength-tunable optical clocks at two wavelengths, which is highly desirable for composite optical logic gates, cascaded optical signal processing modules or optical signal processing modules that need synchronized pulses at multiple wavelengths. In addition, the scheme can operate in both RZ and NRZ systems. The feasibility of the method is demonstrated by an experiment, in which dual-wavelength 10-GHz optical clock with a timing jitter less than 170 fs is obtained from 10-Gb/s degraded RZ and NRZ signals. The optical clocks can be tuned from 1530 to 1565 nm.     

All-optical implementations for high-capacity TDMA networks

In this article we show how optical technology can allow the design of new optical devices that are able to perform some network functions in order to treat very high bit rate signals (100 Gbit/s). The multiplexing technique that we take into account is the Time Division Multiple Access (TDMA), and the network functions we consider are multiplexing, demultiplexing, synchronization, packet decoding, routing, and resolution of packet contention.

In order to show how these new optical devices can improve the network performance we propose two different network topologies: the first concerns a TDMA star network where the signal information is simultaneously broadcast to all users, while the second is a multihop network. The former is useful mainly for circuit switching, while the latter is suitable for packet switching.

Soliton propagation is used in order to avoid the problem of fiber chromatic dispersion.     

偏置M-Z调制器构建2-bits电光模数转换相位编码方法的分析与模拟

为了降低电光相位编码器功率消耗和解决内部M Z调制器一致性要求高的问题,利用2个偏置M Z调制器构成了用于电光模数转换的2 bits电光相位编码器。理论分析了偏置M Z调制器实现2 bits电光相位编码的方法、特点和性能。仿真结果验证了采用偏置M Z调制器构成的2 bits相位编码方法可行性,并实现了对1 GHz模拟电信号的采样速率12 GSa/s模数转换。分析和仿真结果表明,采用该方法对调制器一致性要求低,对输入信号功率要求低于0.32 W。分析结果表明,调制器直流漂移不影响最低位量化结果,引起最高位量化结果的判决模糊低于3.8%。     

Influence of self-focusing effect on femtosecond collinear nondegenerate optical Kerr measurements

We performed the femtosecond nondegenerate optical Kerr shutter (OKS) measurements in a 10-mm-thick optical glass. The time-resolved OKS signals showed an obvious asymmetry and a large broadening with respect to that for thin samples. The time-resolved OKS signals in samples with different thicknesses showed that, the temporal broadening of the OKS signals was attributed to the group velocity mismatch between pump and probe beams of different wavelengths. By imaging the filament induced inside the glass, we attributed the asymmetry of the time-resolved OKS signals to the focusing position change of pump beam caused by self-focusing and re-focusing effect.     

Characterization of time-resolved laser differential phase using 3D complementary cumulative distribution functions

An experimental method for characterizing the time-resolved phase noise of a fast switching tunable laser is discussed. The method experimentally determines a complementary cumulative distribution function of the laser's differential phase as a function of time after a switching event. A time resolved bit error rate of differential quadrature phase shift keying formatted data, calculated using the phase noise measurements, was fitted to an experimental time-resolved bit error rate measurement using a field programmable gate array, finding a good agreement between the time-resolved bit error rates.     

混沌与湍流大气中的光通信

目前, 光无线通信的质量主要受到大气信道环境的制约, 大气信道中混沌介质与湍流的强烈扰动使得通信质量很差, 甚至通信中断. 提出了一种面到点的光无线通信机理: 利用面阵各单元的光信号在混沌介质中传输通道的空间非相干性, 通过桶探测器收集通过混沌介质的光信号的能量和, 平均各传输通道的交叉干扰, 降低混沌介质对光无线通信的影响; 利用随机噪声与随机编码的空间非相干性, 经过二阶相关运算, 构建新的信号传输方程, 减弱大气湍流及背景光对信号解码的干扰, 使得接收端并不需要窄带光学滤波器. 数值仿真和演示实验表明, 该光无线通信机理在混沌与湍流大气中的误码率为10^-4-10^-2, 能够实现复杂大气环境中的光通信, 在军事、抢险救援等方面具有重要应用价值.     

An all-optical bit-error indicating scheme based on self-phase modulation and filtering

In this paper, a novel all-optical bit-error indicating scheme is numerically studied. The bit-error indicating function is achieved by two all-optical processing stages. Firstly, the amplified original bit stream propagates through a high-nonlinear fiber and experiences self-phase modulation which causes intensity-dependent spectrum broadening and split. And then, the bit stream output from the high-nonlinear fiber is filtered by a band-pass filter with the same central wavelength as the original bit stream to generate an error bit indicating signal. The error bit indicating signal, in which only the “Error” bits have the highest peak power, is synchronous with the delayed original bit stream. Therefore, the position of the “Error” bits in the original bit stream can be identified by setting only one judge threshold in the error bit indicating signal. The scheme is demonstrated for an 80 Gb/s bit stream with return-to-zero format by simulation. The results show that the scheme can be used for the all-optical bit-error indicating of the super high bit-rate systems using the return-to-zero format which is favored in the optical time division multiplexing transmission systems.     

面向全光物理随机数发生器的混沌实时光采样研究

基于混沌激光实现全光物理随机数发生器的物理基础是完成对混沌光信号的高速实时全光采样. 本文利用偏振无关的SOA构建出TOAD全光采样门, 以光反馈半导体激光器产生混沌激光, 对混沌激光的全光采样可行性进行了原理性实验论证, 实现了对光反馈半导体激光器产生的6.4 GHz带宽的混沌激光5 GSa/s的实时、高保真全光采样. 进一步研究显示, 光采样周期与外腔反馈时间成比例与否对混沌信号弱周期性的抑制水平影响显著. 当两者不成比例时, 可有效消除原始混沌信号的弱周期性, 有利于高质量物理随机数的产生.     

测速光幕靶用数字信号处理算法

针对光幕靶在使用中易受到蚊虫、冲击波和光电器件随机噪声干扰因而可靠性差的技术难题,提出一种测速光幕靶用数字信号处理算法。利用数据采集仪采集光幕靶输出的弹丸过靶信号,通过莱达因准则剔除偶发性干扰数据。通过阈值比较法判断出弹丸信号的时间范围后,利用4次高斯公式对一定时间范围内的采样数据进行曲线拟合,并准确计算出半峰值触发时刻点,实现低采样率下的高精度测量。研究的信号处理算法利用计算机进行仿真验证,其原理正确,计算效率高。配合XGK-2002型光幕靶进行实弹射击试验,测试数据表明:该算法可准确计算出各类弹丸信号的过幕时刻,极大地提高了光幕靶的稳定性和适用范围,测量相对误差不大于0.1%。研究的算法同样适用于一类动态特征信号的提取与计算。