炭黑填充聚丙烯/尼龙6/玻璃纤维复合材料的制备及表征

以聚丙烯(PP)和尼龙6(PA6)的共混物为基体材料,以导电炭黑(CB)和玻璃纤维(GF)作为填料,通过熔融共混的方法制备了导电复合材料。研究了GF和CB质量分数对复合材料热稳定性、导电性能、力学性能和微观形貌的影响。结果表明:CB粒子选择性分散在PA6中,同时PA6包覆在GF表面,通过具有较大长径比的纤维相互搭接形成连续的网络结构,从而显著降低复合材料的逾渗阈值。在相同CB质量分数下(2%),PP/PA6/GF/CB的表面电阻率相对于PP/PA6/CB体系降低了5个数量级。此外,引入GF后,材料的热稳定性和拉伸强度都有所提高。     

全钒液流电池用导电高分子材料集流体的研究

以炭黑、石墨、碳纤维等炭系与基体树脂复合改性得到体积电阻率小于0.1的导电高分子材料.研究了不同复合体系及不同配方的复合材料的导电性能,其中尤以SIS/PP体系中碳纤维占填料量32.5%的材料导电率高、力学性能和加工性能良好,并与石墨毡有较好的粘接性.选用该体系作为钒电池集流板,考察了电池性能,研究结果表明,导电高分子材料可以作为钒电池集流体材料,并在钒电池中具有良好的应用前景.     

全钒液流电池用导电高分子材料集流体的研究

以炭黑、石墨、碳纤维等炭系与基体树脂复合改性得到体积电阻率小于0．1的导电高分子材料。研究了不同复合体系及不同配方的复合材料的导电性能，其中尤以SIS／PP体系中碳纤维占填料量32．5％的材料导电率高、力学性能和加工性能良好，并与石墨毡有较好的粘接性。选用该体系作为钒电池集流板，考察了电池性能，研究结果表明，导电高分子材料可以作为钒电池集流体材料，并在钒电池中具有良好的应用前景。     

玻璃纤维对碳纳米管填充聚合物/热塑性聚氨酯共混体系导电性能的影响

研究了表面带有环氧基团的玻璃纤维(GF)对聚丙烯(PP)/热塑性聚氨酯(TPU)/多壁碳纳米管(MWCNT)、 聚甲基丙烯酸甲酯(PMMA)/TPU/MWCNT和聚乳酸(PLA)/TPU/MWCNT体系导电性能的影响. 研究结果表明, 未添加GF时, 由于MWCNTs选择性地分布在TPU分散相中, PP/TPU/MWCNT, PMMA/TPU/MWCNT和PLA/TPU/MWCNT材料的导电性能很差; 加入20%的GF使3个体系的电阻率均大幅度下降, 最高下降约13个数量级, 表明填充GF是一种具有普适性的改善以TPU为分散相的共混体系导电性能的有效方法. GF使体系电阻率降低的机理主要是形成了TPU包覆GF结构, 该结构可以看作长径比较高的导电棒, 可以有效协助导电通路的构建; 同时GF还起到了体积占位的作用, 提高了体系中导电组分在基体中的有效浓度.     

碳系导电填料混杂填充聚合物共混体系的导电逾渗模型

以排除体积理论为基础,提出了3种碳系导电填料混杂填充聚合物共混体系的导电逾渗模型,并利用三维图和二维图对导电逾渗模型进行了描述.选用炭黑、聚团状碳纳米管和阵列碳纳米管3种导电填料,以聚碳酸酯(PC)/苯乙烯-丙烯腈共聚物(SAN)(70∶30,质量比)和PC/聚苯醚(PPO)(70∶30,质量比)2个共混体系进行研究,通过不同导电填料在单一聚合物及其共混物中逾渗值的测量,对导电逾渗模型公式的各个参数进行计算和修正.导电逾渗模型预测结果与样品实际电阻率基本吻合,证明了模型的普适性和实用价值.对于基体相不变的系列聚合物共混体系,可以通过任意一种导电填料在共混体系中的逾渗值及在基体相聚合物中的逾渗值之比得到模型公式的相关参数,从而极大地方便了模型的推广和应用.     

LDPE／CPE／炭黑三相复合导电体系的亚微形态和导电性能

对ＬＤＰＥ／ＣＰＥ／炭黑三相复合导电体系的亚微形态和导电性能进行了研究。实验发现,该体系的亚微形态在共混比ＬＤＰＥ／ＣＰＥ大于和小于５０／５０时为典型的“海－岛”结构,在５０／５０时,为两相连续交错“互锁”结构;在共混比大于５０／５０时,ＬＤＰＥ／ＣＰＥ炭黑复合体系的导电性能较单一的ＬＰＤＰＥ树脂与炭黑复合体系的高２－５个数量级。     

聚乙烯/炭黑复合材料导电体系的结构形态

将导电填料（例如炭黑）加入绝缘的聚合物基体即得到导电复合材料,两组混全物的电阻率随导电填料体积分数的变化而改变,电阻率与导电填料体积分数的关系称为渗流曲线,可分为三个主要区域：低导电填料含量区域,复合材料的电阻率很大,聚合物的电阻率占主导;渗流区域,导电填料含量少量的增加会引起复合材料电阻率很大的提高;高导电填料区域,复合材料电阻率很大的提高;高导电填料区域,复合材料电阻率主要由导电填料的电阻率决定,对于导电复合材料已有大量的实验和理论工作来解释导电复合材料已有大量的实验和理论工作来解释导电填料含量和复合材料各组分的形貌对电性能的影响,其中有效介质普适方程（GEM方程）已经对大量的渗流曲线进行了精确的拟合。聚乙烯／炭黑复合材料中由于炭黑的大量分布很难观测其微观形貌,本文对不同辐照交联程度和不同环境温度下聚乙烯／炭黑复合材料的渗流曲线进行分析,试图找出GEM方程各参数与复合材料各组分形貌的关系,为导电复合材料的设计和制备提供理论基础。     

一种提高有机硅导电橡胶复合材料导电和电磁屏蔽性能的方法

描述了一种利用多元复合导电网络提高有机硅橡胶复合材料导电和电磁屏蔽性能的思想。这种含有多元复合导电网络的复合材料是通过将镀银泡沫、导电填料和有机硅橡胶复合在一起而制备的。利用扫描电子显微镜观察了复合材料的微观结构,采用电阻测试仪、矢量网络分析仪、热失重分析仪分别研究了复合材料的导电性、电磁屏蔽性能及热稳定性,并探讨了补强剂SiO2对这些性能的影响。结果表明,2%碳纳米管/导电泡沫/硅橡胶多元复合体系相比于2%碳纳米管/硅橡胶单一复合体系电阻率降低了6个数量级,平均电磁屏蔽效能由12dB提高到52dB,增大了4倍。当导电填料换为炭黑后,2%炭黑/导电泡沫/硅橡胶多元复合体系相比于2%炭黑/硅橡胶单一复合体系电阻率降低了7个数量级,平均电磁屏蔽效能由10dB提高到50dB,增大了5倍。由于多元复合导电网络,材料的导电性能和电磁屏蔽性能大幅度提升。此外,补强剂的加入增大了复合材料的热稳定性,但降低了其导电和电磁屏蔽性能。     

聚乙烯复合导电塑料世

采用高密度聚乙烯、SEBS、导电炭黑和炭纤维等经过混合、造粒、注塑成型等工艺过程,制备了聚乙烯复合导电塑料,测试了其物理化学性能。同时设计了复合导电塑料的检漏方法和耐电化学腐蚀的实验方法。结果表明,聚乙烯复合导电塑料的体积电阻率达到0．2Ω·cm,拉伸强度为47．6MPa,断裂伸长率1．6％,同时具有不渗液、耐腐蚀等特性,SEM观察表明,聚乙烯复合导电塑料中形成了导电网络,适合用作钒电池的集流体。     

CB在PET-PE复合材料中的选择分散及电性能

用Haake转矩流变仪制备了聚对苯二甲酸乙二酯-聚乙烯-炭黑(PET-PE-CB)复合材料.通过溶解性试验、扫描电镜测试对CB在PET-PE多相体系中的选择性分散进行了研究,考察了CB分布对电性能的影响.结果表明:CB倾向于分布在PET相,改变CB填充量、基体配比以及加料次序对CB微观分布的影响不大.当m(CB)/m(PET-PE)=0.07时,出现渗滤现象.固定炭黑含量,当PET的质量分数由20%增加到60%时,材料的体积电阻率下降了6个数量级,一次性加料更有利于形成导电通路,可以获得较低的体积电阻.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.