Trace analysis of polycyclic aromatic hydrocarbons using calixarene layered gold colloid film as substrates for surface‐enhanced Raman scattering

A surface‐enhanced Raman scattering (SERS) active substrate for the detection of polycyclic aromatic hydrocarbons (PAHs) was developed, which used 25, 27‐dimercaptoacetic acid‐26, 28‐dihydroxy‐4‐terbutyl calix[4]arene (DMCX) to functionalize a gold colloid film. This SERS‐active substrate prepared by self‐assembly method exhibits a high sensitivity, especially for the detection of PAHs. With the use of this SERS‐active substrate and with the application of the shifted excitation Raman difference spectroscopy (SERDS) technique, Raman signals of pyrene and anthracene in aqueous solutions at low concentration level (500 pM) can be obtained. Moreover, because PAHs are blocked from being directly adsorbed on gold colloid by DMCX and the photochemical reactions of adsorbates are avoided, the Raman bands of PAHs adsorbed on DMCX‐fuctionalized gold colloid film can be one‐to‐one correspondence with those of solid PAHs, and additionally, this SERS‐active substrate can be easily cleaned and reused. The obtained results demonstrate that the DMCX‐functionalized gold colloid films prepared by self‐assembly method have great potential to be developed to an in situ PAHs detection substrate. Copyright © 2012 John Wiley & Sons, Ltd.     

应用球形和海胆状金混合SERS基底检测高环多环芳烃

合成了海胆状金银复合纳米材料,并与球形金纳米材料混合作为表面增强拉曼活性基底实现了对水中高环多环芳烃的痕量检测。对海胆状材料进行表征,粒径大小约为300～400 nm,表面有40～100 nm明显的刺状凸起。与球形金溶胶混合后并优化pH值及混合比例等参数,产生了优于球形金溶胶2～3倍的增强效果。利用此增强基底检测了危害严重的高环多环芳烃污染物——芘(四环)、苯并蒽(四环)、苯并芘(五环),得到的光谱数据反映出混合SERS基底有良好的重复性和稳定性,对测得光谱进行特征峰归属分析,固体拉曼光谱与水溶液SERS光谱有确定的对应关系,并且在低浓度范围多环芳烃特征峰峰强与其水溶液浓度有良好的线性关系。经计算,芘(四环)、苯并蒽(四环)、苯并芘(五环)的检测限分别为0.44,2.92和1.64 nmol·L-1。该研究的创新点为合成了海胆金纳米颗粒,与球形金溶胶混合后制成新型高效SERS检测基底;选用自制高效SERS基底,实现了高环PAHs痕量检测。结果表明,利用该方法制备的活性基底,可实现对水中高环多环芳烃的痕量检测,为检测水中高环多环芳烃提供了实验室依据。     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

多环芳烃的表面增强拉曼光谱探测与分析

首次实现了以参数优化的金溶胶为表面增强拉曼散射(SERS)活性基底探测水中痕量的多环芳烃。采用化学还原法制备不同颗粒大小的金溶胶,实验确定了632.8 nm激发光下的最优金纳米颗粒的平均粒径为(32±3) nm,并以此金溶胶为基底,探索pH值对多环芳烃增强效果的影响,发现pH=13效果最佳,与pH=6相比谱线绝对强度提高约20倍。以粒径为(32±3) nm,pH=13的金溶胶为活性基底对不同浓度萘、菲、芘溶液进行了SERS光谱探测,探测到的最低浓度分别为20,4和4 nmol·L-1,特征峰强与浓度呈线性关系,线性拟合相关系数均在0.985以上,三者混合溶液的SERS光谱可清晰分辨出各自的特征峰。结果表明,该实验所采用的SERS活性基底灵敏度较高,具有广阔的应用前景。     

The role of the dielectric environment in surface‐enhanced Raman scattering on the detection of a 4‐nitrothiophenol monolayer

Nanotechnology enables the generation and characterization of novel surface‐enhanced Raman scattering (SERS) substrates. In this study, we focus on the impact of the carrier material of the SERS active layer and hence the dielectric environment to the enhancement. Therefore, a self‐assembled monolayer of 4‐nitrothiophenol is immobilized on silver and gold particles substrates on a quartz carrier. The detection of the monolayer occurs through the quartz carrier and through air. For the former, an increase of the intensity of the SERS bands in the spectrum is observed compared to the latter. The magnitude of the increase is larger for gold than for silver. Calculations according to the theoretical model of the electromagnetic enhancement agree with our experimental data. The presented detection mode will stimulate the fabrication of novel SERS sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of solid substrate on the SERS‐based immunoassay: a comparative study

A comparative study of the solid substrates used in surface‐enhanced Raman scattering (SERS) based immunoassay is made in this paper. Five different substrates were prepared and divided into two groups with and without SERS activity. They are (1) a poly‐L ‐lysine slide, (2) a glutaraldehyde (GA)‐aminosilane slide, (3) a substrate assembled with silver nanoparticles, (4) a substrate assembled with silver nanoparticles and functionalized with GA–aminosilane and (5) a substrate assembled with gold nanoparticles, of which the first two are substrates are without SERS activity and the latter three are with SERS activity because of the existence of the metallic nanoparticles. The SERS experimental results show that the immunoassay performed on an SERS‐active substrate is more effective than that employing the inactive substrate. Among the inactive substrates, the GA–aminosilane slide with a better ability for antibody immobilization leads to a more sensitive immunoassay than the poly‐L ‐lysine slide. Moreover, for SERS‐based immunoassay, the substrate with assembled silver nanoparticles has an advantage of higher SERS enhancement capacity over the substrate assembled with gold nanoparticles. This work indicates that SERS‐active substrates play important and positive roles in sensitive SERS‐based immunoassay. Copyright © 2010 John Wiley & Sons, Ltd.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.     

Portable smart films for ultrasensitive detection and chemical analysis using SERS and SERRS

Metallic nanostructures, much smaller than the wavelength of visible light, which support localized surface plasmon resonances, are central to the giant signal enhancement achieved in surface‐enhanced Raman scattering (SERS) and surface‐enhanced resonance Raman scattering (SERRS). Plasmonic driven SERS and SERRS is a powerful analytical tool for ultrasensitive detection down to single molecule detection. For all practical SERS applications a key issue is the development of reproducible and portable SERS‐active substrates, where the most widely used metals for nanostructure fabrication are silver and gold. Here, we report the fabrication of a ‘smart film’, containing gold nanoparticles (AuNPs), produced by in situ reduction of gold chloride III (Au⁺³) in natural rubber (NR) membranes for SERS and SERRS applications. The composite films (NR/AuNP membranes) show characteristic plasmon absorption of Au nanostructures, which notably do not influence the mechanical properties of the NR membranes. The term ‘smart film’ has to do with the fact that the SERS substrate (smart film) is flexible and standalone, which allows one to take it anywhere and to dip it into solutions containing the analyte to be characterized by SERS or SERRS technique. Besides, the synthesis of the AuNPs at the surface of NR films is much simpler than making an Au colloid and cast it onto a substrate surface or preparing an Au evaporated film. Copyright © 2012 John Wiley & Sons, Ltd.     

Gold‐coated zinc oxide nanowire‐based substrate for surface‐enhanced Raman spectroscopy

Zinc oxide nanowires with two distinct morphologies were synthesized on silicon substrates using a simple thermal evaporation and vapor transport method in an oxidizing environment. The as‐synthesized nanowires were coated with gold to allow excitation of surface plasmons over a broad frequency range. SERS studies with near‐IR excitation at 785 nm showed significant enhancement (average enhancement > 10⁶) with excellent reproducibility to detect monolayer concentrations of 4‐methylbenzenethiol (4‐MBT) and 1,2‐benzendithiol (1,2‐BDT) probe molecules. The Raman enhancement showed a strong dependence on the gold film thickness, and the peak enhancement was observed for a ∼40‐nm‐thick film. The Raman enhancement was stronger for randomly oriented nanowires compared to aligned ones suggesting the importance of contributions from the junctions of nanowires. Copyright © 2009 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering from gold‐coated germanium oxide nanowires

We utilized bulk‐synthesized nanowires (NWs) of germanium dioxide as nanoscale structures that can be coated with noble metals to allow the excitation of surface plasmons over a broad frequency range. The NWs were synthesized on substrates of silicon using gold‐catalyst‐assisted vapor–liquid–solid (VLS) growth mechanism in a simple quartz tube furnace setup. The resulting NWs have diameters of ∼100–200 nm, with lengths averaging ∼10–40 µm and randomly distributed on the substrate. The NWs are subsequently coated with thin films of gold, which provide a surface‐plasmon‐active surface. Surface‐enhanced Raman scattering (SERS) studies with near‐infrared (NIR) excitation at 785 nm show significant enhancement (average enhancement > 10⁶) with good uniformity to detect submonolayer concentrations of 4‐methylbenzenethiol (4‐MBT), trans‐1,2‐bis(4‐pyridyl)ethylene (BPE), and 1,2‐benzendithiol (1,2‐BDT) probe molecules. We also observed an intense, broad continuum in the Raman spectrum of NWs after metal coating, which tended to diminish with the analyte monolayer formation. Copyright © 2008 John Wiley & Sons, Ltd.     

Improved performance of surface‐enhanced Raman scattering on silver substrates prepared in nitric acid solutions

In this work, we propose a new electrochemical method to prepare surface‐enhanced Raman scattering (SERS)‐active silver substrates in nitric acid solutions. Experimental results indicate that the SERS intensity of adsorbed Rhodamine 6G (R6G) can be significantly increased, as compared with that of R6G adsorbed on a SERS‐active Ag substrate prepared by an electrochemical method in a chloride‐containing solution, which was generally employed in the literature. Moreover, the SERS of R6G on the newly developed substrate (prepared in a nitric acid solution) still performs well at a high temperature of 250 °C. However, the enhancement capability of the SERS‐active substrate prepared in a chloride‐containing solution is seriously destroyed at temperatures higher than 150 °C. Further investigations indicate that the oxidation states of roughened Ag substrates prepared in nitric acid solutions under different experiment conditions have less influence on the corresponding SERS performances. Instead, different surface morphologies of roughened Ag substrates and different contents of nitrogen‐containing dopping ions on the roughened Ag substrates demonstrate significant effects on the corresponding SERS performances. Copyright © 2011 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering of aromatic molecules on graphene oxide

Graphene has become an ideal substrate for surface‐enhanced Raman scattering (SERS) to study the chemical enhancement mechanism. In comparison with mechanically exfoliated graphene, graphene oxide (GO) has been found to be a better substrate due to its highly negatively charged oxygen functional groups. In this work, the pH‐dependent SERS effect of aromatic molecules on GO are investigated. The results demonstrate that the Raman enhancement of dyes deposited on GO performs differently over a wide range of pH values (2 to 10). Adsorption experiments show that the pH‐dependent SERS effect is closely related to the adsorption of aromatic molecules on GO, which is dominated by the electrostatic interaction. Thus, the influence of pH in GO‐mediated SERS should be carefully considered, especially in its biomedical application. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimization of extinction efficiency of gold‐coated polystyrene bead substrates improves surface‐enhanced Raman scattering effects by post‐growth microwave heating treatment

We report a novel post‐growth microwave treatment approach to selectively modify the surface morphologies of gold (Au) films coated on the polystyrene (PS) bead substrates for effectively improving the surface‐enhanced Raman scattering (SERS) effect on the analytes. The discrete dipole approximation (DDA) model was introduced to evaluate the enhancement effects by calculating the localized electromagnetic field distribution and extinction efficiency based on the sizes of the trenches and voids, and the surface roughness of the modified Au–PS bead substrates. The SERS performance of microwave‐modified Au–PS substrates on rhodamine 6G (Rh 6G) and saliva yields at least 10‐fold improvements in SERS intensities compared to the as‐grown substrates, which is also in agreement with theoretical predictions by DDA modeling. This work demonstrates both experimentally and theoretically the efficacy of the microwave heating treatment on modifying the Au–PS bead substrates for the realization of high SERS performance in biomedical applications. Copyright © 2009 John Wiley & Sons, Ltd.     

应用银溶胶膜探测水中抗生素的表面增强拉曼光谱研究

以自组装法制备的银溶胶膜为表面增强拉曼散射活性基底实现了对水中抗生素的痕量检测。采用微波加热法制备银溶胶,自组装法制备银溶胶膜。通过改变银溶胶的pH值及镀膜的次数,研究其对抗生素增强效果的影响。实验发现,采用不同pH值的银溶胶镀膜所获得的银溶胶膜的增强效果有很大差异,当银溶胶pH=4,且镀膜次数为五次时,增强效果最佳。以此银溶胶膜为基底对三种抗生素(氯霉素、环丙沙星、恩诺沙星)进行了SERS检测,可以检测到的最低浓度分别为120,15,120 nmol·L-1。结果表明,利用改进方法制备的银溶胶膜,可以对水中抗生素进行痕量检测,为实现养殖水中残留抗生素的检测提供了方法。     

Characterization of polycyclic aromatic hydrocarbons using Raman and surface‐enhanced Raman spectroscopy

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous atmospheric pollutants and food contaminants, which exhibit potent carcinogenicity, mutagenicity, and teratogenicity. Vibrational spectroscopy techniques, especially Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS), can be potentially used as an alternative technique to liquid and gas chromatography in PAH analysis. However, there is limited information on the intrinsic Raman and SERS fingerprints of PAHs. In this study, we have acquired the Raman and SERS spectra of seven PAH compounds and compared their experimental spectra with theoretical Raman spectra calculated by density function theory (DFT). The vibrational modes corresponding to the Raman peaks have also been assigned using DFT. Characteristic Raman and SERS peaks have been identified for five PAH compounds, and the limits of detection were estimated. Such information could be useful for developing SERS assays for simple and rapid PAH identification. Copyright © 2014 John Wiley & Sons, Ltd.     

A rapid technique for synthesis of metallic nanoparticles for surface enhanced Raman spectroscopy

Incubator‐shaker method was used as a rapid technique to fabricate an efficient surface enhanced Raman scattering (SERS) substrate by combination of zero valent nanostructures and carbon fiber, which shows dramatic Raman enhancement of nitroaromatic molecule. The fabricated Ag nanoparticle on carbon‐fiber substrate (Ag–C) was used as an efficient SERS substrate to detect the adsorbed 2, 4‐dinitrotoluene molecules with a detection limit of 50 ppm. In advent, our developed SERS substrates could have great potential in detecting other nitro‐aromatic based‐explosive materials, such as 2, 4, 6‐trinitrotoluene molecules. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancements in intensity and thermal stability of Raman spectra based on roughened gold substrates modified by underpotential deposition of silver

In this study, electrochemically roughened gold is modified with underpotential deposition (UPD) silver to investigate the effects on enhancements in the intensity and the thermal stability of surface‐enhanced Raman scattering (SERS). The SERS of Rhodamine 6G (R6G) adsorbed on the UPD Ag‐modified Au substrate exhibits a higher intensity by six‐fold of magnitude, as compared with that of R6G adsorbedon the unmodified Au substrate. Moreover, the SERS enhancement capabilities of UPD Ag‐modified Au and unmodified Au substrates are seriously depressed at temperatures higher than 200 and 150 °C, respectively. It indicates that the modification of UPD Ag can significantly depress the thermal destruction of SERS‐active substrates. Copyright © 2009 John Wiley & Sons, Ltd.