Effect of surface morphology on surface‐enhanced Raman scattering of 4‐aminobenzenethiol adsorbed on gold substrates

The substrate‐dependent surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT) adsorbed on Au surfaces has been investigated. 4‐ABT is one of the very unique adsorbate molecules whose SERS spectral patterns are known to be noticeably dependent on the relative contribution of chemical enhancement mechanism vs electromagnetic enhancement mechanism. The SERS spectral patterns of 4‐ABT adsorbed on gold substrates with various surface morphology have thus been analyzed in terms of the symmetry types of the vibrational modes. Almost invisibly weak b₂ type vibrational bands were observed in the SERS spectra of the 4‐ABT adsorbed on Au colloidal sol nanoparticles or commercially available Au micro‐powders because of the weak contribution of the chemical enhancement. However, greatly enhanced b₂ vibrational bands were observed in the spectra of the 4‐ABT molecules adsorbed on the synthesized Au(Zn) sponge or the electrochemically roughened Au(ORC) foil caused by the strong contribution of the chemical enhancement mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

An improved self‐assembly gold colloid film as surface‐enhanced Raman substrate for detection of trace‐level polycyclic aromatic hydrocarbons in aqueous solution

To detect trace‐level polycyclic aromatic hydrocarbons, some investigations of an improved self‐assembly method are carried out using gold colloid films for the preparation of the surface‐enhanced Raman scattering (SERS)‐active substrate. Extinction spectra and scanning electron microscopy images reveal that controllable surface plasmonic metal substrates can be obtained by increasing the temperature of (3‐aminopropyl)trimethoxysilane solution up to 64.5 °C. The SERS‐active substrates have a high enhancement factor, and they can be both easily prepared and reproducible. With the use of these substrates, different concentrations of pyrene and anthracene in aqueous solutions were detected by SERS. A further enhancement can be supported by shifted excitation Raman difference spectroscopy. Raman signals of pyrene and anthracene adsorbed on gold colloid substrates up to limits of detection at 5 and 1 nmol/l, respectively, can be obtained. The quantitative analysis shows the possibility of in situ detection of polycyclic aromatic hydrocarbons while such gold colloid film serves as a SERS‐active substrate. Copyright © 2012 John Wiley & Sons, Ltd.     

Reduction of silver nanoparticles onto graphene oxide nanosheets with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylformamide and SERS activities of GO/Ag composites

Silver nanoparticles (Ag NPs) have been homogeneously deposited onto graphene oxide (GO) nanosheets by an optimal method, in which N,N-dimethylformamide (DMF) as a co-dispersant of GO and reductant of sliver ions is added to an aqueous suspension of GO and AgNO₃. GO nanosheets are uniformly covered by Ag NPs with a narrow size distribution and inter-particle gap. Raman signals of GO are greatly enhanced after deposition owing to the charge transfer interaction of GO with Ag NPs. The GO/Ag composite can be further utilized as an effective surface-enhanced Raman scattering (SERS) active substrate. Several new Raman bands and frequency shifts are clearly observed in using 4-aminothiophenol (4-ATP) as a Raman probe on GO/Ag compared to the normal Raman spectrum of solid 4-ATP. The Raman enhancement arises from a major electromagnetic effect and a minor chemical effect.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

A rapid technique for synthesis of metallic nanoparticles for surface enhanced Raman spectroscopy

Incubator‐shaker method was used as a rapid technique to fabricate an efficient surface enhanced Raman scattering (SERS) substrate by combination of zero valent nanostructures and carbon fiber, which shows dramatic Raman enhancement of nitroaromatic molecule. The fabricated Ag nanoparticle on carbon‐fiber substrate (Ag–C) was used as an efficient SERS substrate to detect the adsorbed 2, 4‐dinitrotoluene molecules with a detection limit of 50 ppm. In advent, our developed SERS substrates could have great potential in detecting other nitro‐aromatic based‐explosive materials, such as 2, 4, 6‐trinitrotoluene molecules. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

纳米结构表面形貌成型机理及其对石墨烯拉曼光谱的影响

通过真空热蒸镀和高温退火法制备的金属纳米复结构SERS基底因其具有良好的灵敏度,稳定性和均匀性而广泛应用于各种检测领域。石墨烯具有优良的光学特性,化学惰性以及荧光猝灭效应,自被发现以后一直是光学微纳器件中的一大热门材料。石墨烯还可以有效分离探针分子与基底,优化拉曼光谱质量,因此广泛应用于SERS研究领域。同时石墨烯可以有效隔绝金属纳米结构与空气的直接接触防止金属纳米结构被氧化而失效,也可以催化氧化银的脱氧反应提升SERS基底的稳定性。在石墨烯/金属纳米复合结构SERS基底在制备过程中,受到金属膜的种类、厚度参数、气体种类、退火时间、温度和气压等因素的影响,制备的金属纳米结构形貌存在很大差异。石墨烯的拉曼光谱会因为应力和掺杂导致其拉曼特征峰出现不同程度的增强,移动以及展宽。（1）采用真空热蒸镀法和高温退火法制备石墨烯/银纳米复合结构SERS基底,建立了金属纳米颗粒成型机理的模型,从孔洞形成、孔洞生长、金属纳米岛形成三个阶段分析了金属纳米粒子的成型过程,实验沉积5,10,15以及20 nm的银薄膜,退火后银纳米结构的覆盖率分别为~35.1%,~24.4%,~30%以及~96.0%,在沉积银薄膜样品上使用湿法转移石墨烯,退火处理后发现石墨烯阻止了银纳米岛的形成过程;（2）理论分析了银薄膜厚度、石墨烯覆盖对复合结构的几何形貌、拉曼增强特性的影响,石墨烯由于其具有较高的杨氏模量和表面张力,可以有效抑制退火过程中银薄膜向纳米粒子转变的过程,从而实现对复合结构表面形貌的调控;（3）实验研究了银纳米粒结构形貌对石墨烯拉曼光谱的影响,并理论分析了蒸镀不同银薄膜厚度的样品对石墨烯的拉曼光谱增强,移动以及展宽影响的具体原因。     

Multiscale electromagnetic SERS enhancement on self‐assembled micropatterned gold nanoparticle films

In this work, we demonstrate a cascaded, multiplicative electromagnetic enhancement effect in surface‐enhanced Raman scattering (SERS) on periodically micropatterned films made of colloidal gold nanoparticles, prepared by a self‐assembly approach, without implying lithography procedures. The multiplicative enhancement effect is obtained by combining surface plasmon near‐field enhancement due to nanoscale features with far‐field photonic coupling by periodic microscale features. The effect is observed for both internal Raman reporters (molecules attached to the Au colloids before their assembly) and external Raman probes (molecules adsorbed on the samples after film assembly). The ability of the patterned films for far‐field light coupling is supported by reflectivity spectra, which present minima/maxima in the visible spectral range. Finite‐difference time‐domain computer simulations of the electric field distribution also support this interpretation. The fabricated dual‐scale SERS substrates exhibit a good spot‐to‐spot reproducibility and time stability, as proved by the SERS response over a time scale longer than 1 month. The experimental demonstration of this cascaded electromagnetic enhancement effect contributes to a better understanding of SERS and can affect future design of SERS substrates. Moreover, such dual‐scale colloidal films prepared by convective self‐assembly can be of general interest for the broader field of nanoparticle‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman evidence for Rhodamine 6 G and its derivative with different adsorption geometry to colloidal silver nanoparticle

Some high‐affinity functional groups or resonant molecules were often used as probe molecules adsorbed on silver nanoparticles for Surface‐enhanced Raman scattering (SERS). However, it is still unclear how the attached molecules interact with the silver nanoparticles' surface, and how the anchoring groups affect the optical and electronic properties of molecules. Here, we report that surface‐enhanced Raman studies of two organic compounds; rhodamine 6G (R6G) and its aminated derivative (R‐NH₂) have very different functional groups for surface binding but nearly identical SERS spectroscopic properties at pH = 7 and UV–vis at pH = 3, respectively. A surprise was found that under the same experimental conditions, the SERS signal intensity for R6G is nearly 50‐fold higher than that of R‐NH₂. Furthermore, the pH‐dependent study reveals that the structure of R6G is irreversibly stabilized or ‘locked’ in its form and no longer responsive to pH changes. In contrast, R‐NH₂ is still sensitive to pH, and can be switched between its open‐ring and closed‐ring structures. Copyright © 2013 John Wiley & Sons, Ltd.     

On‐line surface enhanced Raman spectroscopic detection in a recyclable Au@SiO2 modified glass capillary

A facile method was developed to fabricate a high sensitive, reproducible and recyclable surface enhanced Raman spectroscopy (SERS) active glass capillary. The Au nanoparticles were synthesized through a seed‐mediated growth approach and then self‐assembled onto the inner wall of glass capillaries. The attached Au nanoparticles were homogeneously coated with thin silica shell by using the silane coupling agent to functionalize the Au surface. By using thiophenol (TP) as SERS probe molecules, the substrate exhibited robust SERS effects. The adsorbed SERS probe molecules could be rapidly and completely removed away by flowing sodium borohydride solution and thus to obtain a refresh Au@SiO₂ film‐coated substrate for the cyclic detection on different species. The on‐line detection of TP and malachite green (MG) with different concentrations was performed in the flowing system. The intensities of SERS signals were dependent on concentrations of the detected molecules. The results indicated that the SERS‐active substrate has potential applications on the on‐line qualitative and quasi‐quantitative analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Photonic nanojet‐mediated SERS technique for enhancing the Raman scattering of a few molecules

We report a two‐step enhancement of Raman scattering signal (η) of a few dye molecules. In the first step, high‐quality surface‐enhanced Raman scattering (SERS) substrates have been used. The SERS substrates were fabricated by direct current sputtering of Au followed by thermal annealing. The role of thermal annealing of the SERS substrates and numerical aperture of Raman microscopic objective lens on the enhancement has been studied for optimizing the enhancement in the SERS technique. In the second step, the value of η obtained with conventional SERS technique has been improved significantly with the help of photonic nanojet (PNJ) of an optical microsphere (PNJ‐mediated SERS technique). The signal to noise ratio and reproducibility of the experimental results have been found to be very high. Based on our theoretical simulations on PNJ, a few suitable parameters have been proposed for obtaining better enhancement using this technique. To the best of our belief, this report will enable the SERS community to improve η value with ease. Copyright © 2016 John Wiley & Sons, Ltd.     

Use of atomic layer deposition to improve the stability of silver substrates for in situ,high‐temperature SERS measurements

A method to stabilize silver surface‐enhanced Raman spectroscopy (SERS) substrates for in situ, high‐temperature applications is demonstrated. Silver island films grown by thermal evaporation were coated with a thin layer (from 2.5 to 5 nm) of alumina by atomic layer deposition (ALD), which protects and stabilizes the SERS‐active substrate without eliminating the Raman enhancement. The temporal stability of the alumina‐coated silver island films was examined by measurement of the Raman intensity of rhodamine 6G molecules deposited onto bare and alumina‐coated silver substrates over the course of 34 days. The coated substrates showed almost no change in SERS enhancement, while the uncoated substrates exhibited a significant decrease in Raman intensity. To demonstrate the feasibility of the alumina‐coated silver substrate as a probe of adsorbates and reactions at elevated temperatures, an in situ SERS measurement of calcium nitrate tetrahydrate on bare and alumina‐coated silver was performed at temperatures ranging from 25 to 400 °C. ALD deposition of an ultrathin alumina layer significantly improved the thermal stability of the SERS substrate, thus enabling in situ detection of the dehydration of the calcium nitrate tetrahydrate at an elevated temperature. Despite some loss of Raman signal, the coated substrate exhibited greater thermal stability compared to the uncoated substrate. These experiments show that ALD can be used to synthesize stable SERS substrates capable of measuring adsorbates and processes at high temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of 1,2,4‐triazole on a silver electrode: surface‐enhanced Raman spectroscopy and density functional theory studies

The pH‐dependent surface‐enhanced Raman scattering (SERS) of 1,2,4‐triazole adsorbed on silver electrode and normal Raman (NR) spectra of this compound in the aqueous solutions were investigated. The observed bands in the NR and SERS spectra were assigned with the help of density functional theory calculations for model molecules in the neutral, anionic, and cationic forms and their complexes with silver. The Raman wavenumbers and intensities were computed at the optimized molecular geometry. Vibrational assignments of the SERS and NR spectra are provided by calculated potential energy distributions. The combination of experimental SERS results and density functional theory calculations provide an insight into the molecular structure of adlayers formed by 1,2,4‐triazole on a silver surface at varying pH values and enable the determination of molecular orientation with respect to the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Fiber‐optic SERS sensor with optimized geometry: testing and optimization

A unique, geometry‐optimized, surface‐enhanced Raman scattering (SERS) fiber‐optic sensor has been recently developed and built. Though this class of sensors can be very useful in many applications, their use is greatly hindered by the fact that their reusability can hardly be achieved because of the irreversible adsorption of the analyte molecules on the SERS‐active substrate. Different substrates have been tested on our sensor with the purpose of increasing its reusability by means of cleaning procedures or good reproducibility in manufacturing the sensor, keeping, however, the same enhancement. We show that a partial reusability of the sensor is possible using SERS‐active substrates prepared by a standard process of immobilization of silver nanoparticles with 3‐aminopropyltrimethoxysilane. We also show that a fairly good reproducibility can be achieved with a low‐cost substrate realized in a short time by depositing a layer of polyvinyl alcohol (PVA) containing silver nanoparticles on the etched fiber tip. We prove as well that measurements are possible even with nanoparticles dispersed in the analyte solution instead of using a substrate directly made on the sensor tip. Finally, we have successfully tested our sensor with some molecules cited in EFSA (European Food Safety Authority) and FDA (Food and Drug Administration) reports as molecules for which new detection methods are necessary. Copyright © 2009 John Wiley & Sons, Ltd.     

A three‐dimensional surface‐enhanced Raman scattering substrate: Au nanoparticle supramolecular self‐assembly in anodic aluminum oxide template

A three‐dimensional surface‐enhanced Raman scattering (SERS) substrate via the self‐assembly of properly sized Au nanoparticles in anodic aluminum oxide templates was designed and prepared. Au nanoparticles first underwent hydrophobic surface modification. Then, the hydrophobic Au nanoparticles self‐assembled, aggregated and formed many hot spots in the anodic aluminum oxide templates through a supramolecular interaction. We chose thiophenol as a probe molecule to evaluate the SERS enhancement ability of this three‐dimensional substrate. The enhancement factor was calculated to be 4.6 × 10⁶ under the radiation of a 785‐nm laser. By further comparing SERS signals from different points on the same substrate, we confirmed that this substrate possessed good reproducibility and could be applied for SERS detection. Copyright © 2011 John Wiley & Sons, Ltd.     

Silver‐decorated carbon nanotube networks as SERS substrates

We report on investigations upon a surface‐enhanced Raman scattering (SERS) substrate produced from a two‐dimensional single‐walled carbon nanotube (SWNT) network decorated with Ag nanoparticles. Using the strong and unique Raman spectrum of SWNTs as a reference, the SWNT/Ag nanostructure can be considered to provide two regions: one with an ultrasensitive SERS response for single‐molecule SERS (SMSERS) study; and another with uniform SERS enhancement over an area of several square millimeters for general SERS measurements. We report the appearance of an anomalous Raman feature at around 2180 cm⁻¹ in the high‐sensitivity region which exhibits the characteristics of SMSERS. The SERS performance of the uniform area was characterized using pyridine vapor adsorbed onto the substrate. The presence of the SWNT/Ag nanostructure enhanced the Raman intensity by over seven orders of magnitude, a factor comparable to or exceeding that obtained on SERS substrates reported by other groups. The results indicate great potential to produce highly sensitive, uniform SERS substrates via further fine‐tuning of the nanostructure. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of uniform substrate based on silver nanoparticles decorated glycidyl methacrylate‐ethylene dimethacrylate porous material for ultrasensitive surface‐enhanced Raman scattering detection

Surface‐enhanced Raman scattering (SERS) in practical application and theoretical research mostly depends on the performance of the SERS substrate. In this study, a new SERS substrate which is based on inverted self‐assembly of Ag nanoparticles (AgNPs) on glycidyl methacrylate‐ethylene dimethacrylate (GMA‐EDMA) porous material is developed. The characterization results show the GMA‐EDMA material with intertwined pores may contribute to the distribution of the AgNPs to fabricate an ideal substrate for SERS detection. In view of the characteristics of porous material, an inverted assembly method is proposed and used in operation to avoid the adverse gravity effect which may make the AgNPs plug up the pore channel and distribute on the surface unevenly. By the inverted self‐assembly method, the AgNPs could uniformly distribute on the surface of the material stably. The prepared substrate presents ultrasensitivity and good reproducibility for SERS detection. The enhancement factor of rhodamine 6G (R6G) detection is approximately 10¹⁴ and the relative standard deviation of each characteristic peak is about 15% when the substrate is used. The substrate also shows a good performance in detecting paraquat and thymine. The ultrasensitive SERS substrate can be readily integrated into pesticide detection systems and biological sample analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Near‐IR surface‐enhanced Raman spectrum of lignin

Compacted powders of commercially available nano‐ and microparticles of silver were used to successfully induce the surface‐enhanced Raman scattering (SERS) effect in spruce milled‐wood lignin (MWL). For the two silver particle sizes used in this investigation, the spectra were mostly similar. Some general characteristics of the lignin SERS spectrum are described. The SERS technique was found to be sensitive for detecting lignin. Significant spectral changes were present between the SERS and normal Raman spectra of MWL. The SERS spectrum was assigned on the basis of literature‐reported vibrational assignments of lignin and its models. Based on significant changes in Raman features, we propose that the lignin is strongly adsorbed on silver. To determine whether SERS of lignin can be obtained directly from wood without its isolation, Wiley‐milled spruce wood (WMW) adsorbed on silver was studied. The results indicated that not only the surface‐enhancement effect was successfully induced in the WMW, but that its spectrum was similar to MWL SERS. Moreover, for WMW, no signals from the carbohydrate components were observed, and therefore, lignin was detected selectively. This nano‐ and microparticle‐based molecularly specific method is expected to make a significant contribution in identifying and investigating lignin in various lignin‐containing materials. Published in 2009 by John Wiley & Sons, Ltd.     

Surface enhanced Raman scattering of molecules related to highly ordered gold cavities

We presented a controlled particles‐in‐cavity (PIC) pattern for surface‐enhanced Raman scattering (SERS) detection. The periodic gold cavity array was fabricated by electrodeposition using highly ordered polystyrene spheres as a template. The as‐prepared gold cavities can be used as a SERS active substrate with significant spectral enhancement and reproducibility, which was evaluated by SERS signals using 4‐mercaptobenzoic acid (4‐MBA) as probe molecules. The surface of these gold cavities was further functionalized with cetyltrimethylammonium bromide molecules, which may immobilize the 4‐MBA‐modified silver nanoparticles in the gold cavity to form a PIC structure via the electrostatic interaction. We have demonstrated that there exists a pH window for the immobilization of the nanoparticles inside cavities. Therefore, the silver nanoparticles can be selectively immobilized into the functionalized gold cavities under the optimized pH value of the media. Further enhancement of the Raman scattering of the labeled molecules can be achieved due to the interconnection between the silver nanoparticles and gold cavity. Copyright © 2013 John Wiley & Sons, Ltd.