Kinetic of Adsorption of Urea Nitrogen onto Chitosan Coated Dialdehyde Cellulose under Catalysis of Immobilized Urease

The adsorption of urea nitrogen onto chitosan coated dialdehyde cellulose (CDAC) under catalysis of immobilized urease in gelatin membrane (IE) was studied in batch system. The pseudo first-order and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data fitted well to the second-order kinetic model.     

Crosslinked chitosan nanofiber mats fabricated by one-step electrospinning and ion-imprinting methods for metal ions adsorption

The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were fabricated by one-step electrospinning and ion-imprinting methods and their application as adsorbents for metal ions was also investigated.The resulting chitosan nanofiber mats were characterized by scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and thermal gravimetric analysis(TGA).The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were used as adsorbents for the removal of Pb(Ⅱ)ions from aqueous or acid solutions.The effects of p H values,contact time,content of crosslinker(glutaraldehyde)on Pb(Ⅱ)ions adsorption were studied.The results indicated that the Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats had the highest adsorption capacity of 110.0 mg/g at p H 7.The kinetic study demonstrated that the adsorption of Pb(Ⅱ)ions followed the pseudo-second-order model.The equilibrium isotherm data showed that the Langmuir model was the most suitable for predicting the adsorption isotherm of the studied system.The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats had good adsorption selectivity,which illustrates the equilibrium adsorption capacity in the order of Pb(Ⅱ)Cu(Ⅱ)Zn(Ⅱ)Cd(Ⅱ)Ni(Ⅱ).The Pb(Ⅱ)ion-imprinting electrospun crosslinked chitosan nanofiber mats were stable and had good reuse ability.     

Equilibrium and kinetic studies on the adsorption of VB_(12) onto CMK-3

The adsorption of VB12 onto CMK-3 was studied as a function of temperature and initial VB12 concentration. The highest VB12 adsorption capacity was determined as 353.4 mg/g at 40℃. Adsorption data were well described by the Langmuir model, although they could be modelled by the Freundlich equation. The pseudo-first-order and pseudo-second-order kinetic models were applied to test the experimental data. The pseudo-second-oider kinetic model provided the best correlation of the experimental data compared to the pseudo-nrsi-order model.     

EFFECT OF HYPERCROSSLINKED RESINS SURFACE CHEMISTRY ON THE ADSORPTION OF PHENOL FROM AQUEOUS SOLUTION

Two hypercrosslinked resins with similar physical characters but different surface chemistry were synthesized and used to remove phenol from aqueous solutions. The FTIR spectra, elemental analysis and the Boehm titration were used to characterize the chemical properties of the resins. The adsorption experiments were carried out using the bottle-point technique, and the effects of the surface chemistry on the adsorption were discussed. The adsorption data fit well with the Freundlich model, indicating the heterogeneity of the resins surface. It could be seen from the experimental results that the adsorption capacity increased with the increase in the total surface concentration of oxygen-containing groups. The pH dependence and the effects of ionic strength were also discussed. The kinetic adsorption data fit well with the pseudo-second order model, and the results showed that the surface oxygen-containing groups have little effect on the adsorption rate.     

Adsorption of As(III) from aqueous solution based on porous magnetic/chitosan/ferric hydroxide microspheres prepared via electrospraying

Porous chitosan(CS)/magnetic(Fe3O4 )/ferric hydroxide(Fe(OH)3 ) microsphere as novel and low-cost adsorbents for the removal of As(Ⅲ) have been synthesized via the electrospraying technology by a simple process of two steps. Characterization of the obtained adsorbents was studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The adsorption kinetics and equilibrium isotherms were investigated in batch experiments. The Langmuir, Freundlich isotherm and pseudo-second order kinetic models agree well with the experimental data. The adsorption of As(Ⅲ) onto CS/Fe3O4 /Fe(OH)3 microspheres occurred rapidly and reached adsorption equilibrium after about 45 min. The maximum adsorption capacity of CS/Fe3O4 /Fe(OH)3 microspheres, calculated by the Langmuir isotherm model, was 8.47 mg g-1 , which is higher than that of CS/Fe3O4 /Fe(OH) 3 prepared by the conventional method (4.72 mg g-1 ). The results showed that the microspheres had a high adsorption capacity for As(Ⅲ) and a high separation efficiency due to their microporous structure and superparamagnetic characteristics. Present research may eventually lead to a simple and low cost method for fabricating microporous materials and application for removal of arsenic from aqueous solution.     

STUDY ON THE ADSORPTION OF PHENOL BY CHITOSAN FROM AQUEOUS SOLUTION

The effects of pH, initial concentration and temperature on the adsorption of phenol by chitosan were investigated in this paper. The isothermal data was applied to Langmuir linear and the Freundlich linear isotherm equation, and the thermodynamic parameters （AH, AG, AS） were calculated according to the values of binding Langmuir constant, KL. Results indicated that the adsorption between chitosan and phenol was significantly physical in nature, the negative ΔH constant at lower temperature confirmed that more phenol was adsorbed by chitosan at lower temperature. The kinetics of the sorption process of phenol on chitosan was investigated using the pseudo-first order and pseudo-second order kinetics, and results showed that the second order equation model provided the best correlation with the experimental results.     

Kinetics and Thermodynamics of Adsorption of VB12 onto Mesoporous Carbon Coated with PMMA

Ordered mesoporous carbons CMK-3, CMK-1 coated with poly(methyl methacrylate)(PMMA)(CMK-3- PMMA and CMK-1-PMMA) and pristine mesoporous carbons CMK-3, CMK-1 were employed to adsorb vitamin B12(VB12) from water solution. Adsorption isotherm and kinetics of adsorption were investigated via batch experi- ments. It was found that the adsorption capacity of VB12 at 30, 40 and 50 °C can reach 688.2, 572.4 and 428.7 mg/g, respectively. The adsorption isotherm can be described by Langmuir model. The pseudo first- and second-order kinetic models were employed to fit the dynamic adsorption. It was found that the dynamic adsorption follows the pseudo second-order model. The thermodynamic equilibrium coefficients obtained at different temperatures were used to evaluate the thermodynamic constants ΔG0, ΔH0 and ΔS0. The negative value of Gibbs free energy, ΔG0 indicates that the adsorption occurred via a spontaneous process. The increase in the value of –ΔG0 with increasing temperature indicates that higher temperatures were favourable to the sorption process. The enthalpy values of ΔH040 kJ/mol(66.36 kJ/mol and 56.43 kJ/mol) for CMK-3-PMMA and CMK-1-PMMA confirm that chemisorption were involved in the adsorption process. This is consistent with the IR spectra and is another evidence for the formation of hydrogen bond between PMMA in the pore of CMK-3 and VB12.     

改性磁性壳聚糖微球对Cu2+、Cd2+和Ni2+的吸附性能

Fe3O4/ chitosan magnetic microspheres of 50 to 80 滋m were prepared using the inverse phase emulsion dispersion and chemical crosslinking technology, and then modified with ethylenediamine for use in the adsorption of heavy metal ions. The adsorption properties of the modified Fe3O4/chitosan toward Cu2+, Cd2+ and Ni2+ were investigated. It was found that the adsorption capacities of Cu2+ and Ni2+ increased with pH, and a maximum adsorption for Cd2+ occurred at pH=3. The saturated adsorption capacities calculated by Langmuir isotherms were 54.3 mg·g-1 for Cu2+, 20.4 mg·g-1 for Cd2+, and 12.4 mg·g-1 for Ni2+, respectively. The adsorption kinetics were well described by pseudo-second-order equation models. The experimental results showed that the Fe3O4/chitosan modified with ethylenediamine presented higher adsorption selectivity for Cu2+ than for Cd2+ and Ni2+ in all studied pH ranges.     

Synthesis of novel magnetic sulfur-doped Fe_3O_4 nanoparticles for efficient removal of Pb(Ⅱ)

In this work, we report the synthesis of magnetic sulfur-doped Fe_3O_4 nanoparticles (Fe_3O_4:S NPs) with a novel simple strategy,which includes low temperature multicomponent mixing and high temperature sintering. The prepared Fe_3O_4:S NPs exhibit a much better adsorption performance towards Pb(Ⅱ) than bare Fe_3O_4 nanoparticles. FTIR, XPS, and XRD analyses suggested that the removal mechanisms of Pb(Ⅱ) by Fe_3O_4:S NPs were associated with the process of precipitation (formation of PbS), hydrolysis,and surface adsorption. The kinetic studies showed that the adsorption data were described well by a pseudo second-order kinetic model, and the adsorption isotherms could be presented by Freundlich isotherm model. Moreover, the adsorption was not significantly affected by the coexisting ions, and the adsorbent could be easily separated from water by an external magnetic field after Pb(Ⅱ) adsorption. Thus, Fe_3O_4:S NPs are supposed to be a good adsorbents for Pb(Ⅱ) ions in environmental remediation.     

PREPARATION AND ADSORPTION OF THIOUREA MODIFIED GLUTARALDEHYDE-CROSSLINKED CHITOSAN RESINS

1. INTRODUCTION Chitosan is an amino polysaccharide derived from shells of cabs and lobsters, etc, and has good adsorption to metal ions. The direct application of chitosan was restricted because of its poor resistance to acids, and the modification of chitosan was attracted great attention [1]. Zhao [2] prepared a thiolated chitosan resin with good adsorption to Ag(I) based on the reaction of 2-thioacetic acid and acetic anhydrate with chitosan under acidic condition. Aminothiourea [3] …     

Modeling the oxidative coupling of methane： Heterogeneous chemistry coupled with 3D flow field simulation

The oxidative coupling of methane (OCM) over titanate perovskite catalyst has been developed by three-dimensional numerical simulations of flow field coupled with heat transfer as well as heterogeneous kinetic model. The reaction was assumed to take place both in the gas phase and on the catalytic surface. Kinetic rate constants were experimentally obtained using a ten step kinetic model. The simulation results agree quite well with the data of OCM experiments, which were used to investigate the effect of temperature on the selectivity and conversion obtained in the methane oxidative coupling process. The conversion of methane linearly increased with temperature and the selectivity of C2 was practically constant in the temperature range of 973–1073 K. The study shows that CFD tools make it possible to implement the heterogeneous kinetic model even for high exothermic reaction such as OCM.     

Microfluidic synthesis of thiourea modified chitosan microsphere of high specific surface area for heavy metal wastewater treatment

An improved biosorbent of thiourea modified chitosan microsphere(TMCM) with high specific surface,favorable mechanical strength and excellent adsorption performance had been synthesized via microfluidic technology. Polyethylene glycol was used as a significant component added in aqueous solution of chitosan to produce such microspheres through droplets forming, chemical crosslinking and pores creating. For the improvement of adsorption capacity, thiourea was considered as an excellent choice in increasing amino functional group by graft modification. The SEM, FTIR and EDS were employed to detect distinct features of TMCM. Copper(Ⅱ) was used to test the adsorption performance of TMCM. The experimental results indicated that TMCM exhibited higher adsorption capacity(q_e= 60.6 mg g_(-1)) and faster adsorption rate than that non-modified chitosan microsphere(NMCM).The adsorption kinetic was described well by the pseudo-second order kinetic model, which suggested that chemical adsorption along with electrons transferring was dominant in adsorption process.     

Preparation and performance evaluation of resin-derived carbon spheres for desulfurization of fuels

A polystyrene-based ion-exchange resin was employed as the precursor for preparation of resin-derived carbon spheres(RCSs) through KOH activation with various impregnation ratios.Pore structure,yield and hardness,surface functional groups of the samples and their adsorption performance towards dibenzothiophene(DBT) were investigated.The RCSs with large surface areas(up to 2696m2/g) and total pore volumes(up to 1.46 cm3/g) exhibited larger adsorption capacities than a commercial activated carbon,F400.Polanyi-Dubinin-Mane(PDM) model was applied to fit the adsorption data,which proved that micropore filling was involved during the adsorption process.Moreover,a good linear relationship was observed between the extra-micropore volume and adsorption capacity.Intra-particle diffusion(IPD) model was used to describe the kinetic data of DBT onto the adsorbents.The adsorption processes were divided into three stages according to the different diffusion parameter.The selective adsorption towards DBT in the presence of competing compounds was also investigated and the high selectivity of the RSCs towards DBT may be attributed to the large quantity of acidic oxygen-containing groups.     

Comparative study of kinetic modeling for the oxidative coupling of methane by genetic and marquardt algorithms

Overall kinetic studies on the oxidative coupling of methane, OCM, have been conducted in a tubular fixed bed reactor, using perovskite titanate as the reaction catalyst. The appropriate operating conditions were found to be: temperature 750-775 ℃, total feed flow rate of 160 ml/min, CH4/O2 ratio of 2 and GHSV of 100 min-1. Under these conditions, C2 yield of 28% was achieved. Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature, O2 and CH4 partial pressures. Six models have been selected among the common lumped kinetic models. The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters. The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as: the Levenberg-Marquardt and genetic algorithms and the results were compared with one another. It has been found that the Santamaria model is in good agreement with the experimental data. The Arrhenius parameters of this model have been obtained by linear regression. It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.     

ADSORPTION OF 2,4-D ON MODIFIED HYPERCROSSLINKED POLYSTYRENE （NDA-99） AND XAD-4 RESIN

The adsorption behavior of pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution has been investigated using a hypercrosslinked polystyrene adsorbent (NDA-99) modified by dimethylamine group as well as a nonionic macroporous adsorbent (XAD-4). The Langmuir and Freundlich isotherm models were employed to fit the experimental data to describe adsorption mechanism. It shows that NDA-99 resin exhibits an adsorption affinity for 2,4-D higher than XAD-4 resin owing to its exceptional micropore structure and the amine group of the hypercrosslinked matrix.Further studies indicate that the hydrogen bonding interaction and the stronger π-π conjugation play a significant role in the course of the adsorption of 2,4-D on NDA-99 resin, which is in agreement with the IR spectroscopic results and the △E values of HOMO (the highest occupied molecular orbit) of adsorbent and LUMO (the lowest unoccupied molecular orbit) of adsorbate calculated from the MINDO/3 model.     

A simple kinetic model for oxidative coupling of methane over La_(0.6)Sr_(0.4)Co_(0.8)Fe_(0.2)O_(3-δ) nanocatalyst

A simplified kinetic model for the oxidative coupling of methane over a La0.6Sr0.4Co0.8Fe0.2O3-δ nanocatalyst is presented. The kinetic model was developed by experimental data in a catalytic micro-reactor covering a wide range of reaction conditions (0.04相似文献   

Adsorption isotherms and kinetic characteristics of methane on block anthracite over a wide pressure range

It is important to quantitatively understand the methane adsorption and transport mechanism in coal for an evaluation of the reserves and for its production forecast. In this work, a block coal sample was chosen to perform the CH4 adsorption experiments using the gravimetric method at temperatures of 293.60 K, 311.26 K, 332.98 K and 352.55 K and pressures up to 19 MPa. The excess adsorption capacity of CH4 in dry block anthracite increased, followed by a sequence decrease with the increasing pressure. High temperature restrained the growth of the excess adsorption due to that the adsorption is an intrinsically physical and exothermic process. The excess adsorption peak decreased slowly with the increase of temperature and intersected at a pressure of more than 18 MPa; meanwhile, the pressure at the excess adsorption peak increased.The existing correlations were examined in terms of density rather than pressure. The DR+k correlation, with an average relative deviation of ±0.51%, fitted our data better than the others, with an average relative deviation of up to 2.29%. The transportation characteristics of CH4 adsorption was also investigated in this study, including the adsorption rate and diffusion in block coal. The kinetic data could be described by a modified unipore model. The adsorption rates were found to exhibit dependence on pressure and temperature at low pressures, while the calculated diffusivities exhibited little temperature dependence. In addition, the kinetic characteristics were compared between CH4 and CO2 adsorption on the block coal. The excess adsorption ratios of CO2 to CH4obtained from the DR+k model decreased with the increasing pressure.     

A kinetic study of the electron-transfer in the reaction of tribenzylchlorotin with[CoW_(12)O_(40)]~(5-)

A kinetic study of the electron-transfer in the reaction of tribenzylchlorotin with potassium 12-tungsto cobalt(Ⅲ) ate ion, K_5[CoW_(12)O_(40)],abbreviated as Co(Ⅲ)W,has been performed in different solvents.The studies were carried out in methanol, ethanol,acetonitrile and acetic acid/water.The rate constants,reaction rates and activation parameters were calculated. Our findings show that the rate of disappearance of the Co(Ⅲ) is pseudo-first order.The kinetic data is strongly affected by used solvents.T...     

Adsorption Isotherms of Quercetin and Catechin Compounds on Quercetin-MIP

A molecular imprinted polymer(MIP)was prepared with quercetin as the template and methacrylic acid(MAA)as the functional monomer.Acetonitrile and methanol were used as the porogen with ethylene glycol dimethacrylate(EGDMA)as the crosslinker and 2,2'-azobis(isobutyronitrile)(AIBN)as the initiator.The experimental parameters of the equilibrium isotherms were estimated via linear and nonlinear regression analyses.The linear equation as the functions of the adsorption concentration of the single compound in its solution and the competitive adsorption of the single compound in its mixed compounds solution was then expressed,and the adsorption equilibrium data were correlated to Langmuir and Freundlich isotherm models.The mixture compounds show competitive adsorption on the specific binding sites of quercetin-MIP.Furthermore,the competitive Langmuir isotherms were applied to the mixture compounds.The adsorption concentrations of quercetin,( )catechin( C),and(-)epicatechin(EC)on the quercetin molecular imprinted polymer were compared.The quercetin-imprinted polymer shows extraordinarily higher adsorption ability for quercetin than for the two catechin compounds that were also assessed.