A novel method for Co(Ⅱ) and Cu(Ⅱ) analysis by capillary electrophoresis with chemiluminescence detection

Based on the fact that some metal ions can catalyze the chemiluminescence(CL)reaction of luminol with K_3Fe(CN)_6,a novel capillary electrophoresis CL method was developed for the determination of Co(Ⅱ)and Cu(Ⅱ).The separation was carried out with a 10 mmol/L sodium acetate solution containing 0.8 mmol/L luminol and 2.0 mmol/Lα-HIBA(adjusted to pH 4.8 by HAc solution).The post-capillary reagent was 2.0 mmol/L K_3Fe(CN)_6 which was adjusted to pH 13.0 by NaOH solution.Under the optimum conditions,the detection limits(S/N=3)for Co(Ⅱ)and Cu(Ⅱ)were 7.5×10~(-11)mol/L and 7.5×10~(-9)mol/L,with the linear range of 7.5×10~(-9)mol/L to 1.0×10~(-6)mol/L and 7.5×10~(-8)mol/L to 5.0×10~(-5)mol/L, respectively.     

A novel sensitive non-enzymatic glucose sensor

Cu nanoclusters were electrochemically deposited on the film of a Nafion-solubilized multi-wall carbon nanotubes (CNTs) modified glassy carbon electrode (CNTs-GCE), which fabricated a Cu-CNTs composite sensor (Cu-CNTs-GCE) to detect glucose with non-enzyme. The linear range is 7.0×10-7 to 3.5×10-3 mol/L with a high sensitivity of 17.76μA/(mmol L), with a low detection limit 2.1×10-7 mol/L, fast response time (within 5 s), good reproducibility and stability.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.     

Preparation of new hybrid organic/inorganic polymeric chiral stationary phases for ligand-exchange chromatography

Three new hybrid organic/inorganic polymeric ligand-exchange chiral stationary phases were developed by radical chain transfer reaction and surface grafting on silica gel,and successfully used for the enantioseparations of DL-amino acids and DL-hydroxyl acids.The resolutions were achieved by using water containing 2.0×10~(-4) mol/L of CuAc_2 as a mobile phase,column temperature of 40℃,flow rate of 1.0mL/min and detection at UV 254 nm.The elution order of D-isomer before L-isomer was observed for all DL-amino acids resolved except DL-Pro.     

Microwave-radiated synthesis of gold nanoparticles/carbon nanotubes composites and its application to voltammetric detection of trace mercury(II)

Gold nanoparticles/carbon nanotubes (Au-NPs/CNTs) composites were rapidly synthesized by microwave radiation, and firstly applied for the determination of trace mercury(II) by anodic stripping voltammetry (ASV). The structure and composition of the synthesized Au-NPs/CNTs nanocomposites were characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), UV–vis absorption spectroscopy and cyclic voltammetry. Au-NPs/CNTs nanocomposites modified glassy carbon electrode (Au-NPs/CNTs/GCE) exhibited excellent performance for Hg(II) analysis. A wide linear range (5 × 10⁻¹⁰–1.25 × 10⁻⁶ mol/L) and good repeatability (relative standard deviation of 1.84%) were obtained for Hg(II) detection. The limit of detection was found to be 3 × 10⁻¹⁰ mol/L (0.06 μg/L) at 2 min accumulation, while the World Health Organization’s guideline value of mercury for drinking water is 1 μg/L, suggesting the proposed method may have practical utility.     

Electrochemiluminescent biosensor based on multi-wall carbon nanotube/nano-Au modified electrode

The electrochemiluminescent (ECL) behavior of lucigenin on a multi-wall carbon nanotube/nano-Au modified glassy carbon electrode (MWNT/nano-Au/GCE) was studied in this paper. Compared with the bare GCE, the ECL intensity of lucigenin can be greatly enhanced at MWNT/nano-Au/GCE. Based on the fact that superoxide dimutase (SOD) could obviously inhibit the ECL of lucigenin at MWNT/nano-Au/GCE, a sensitive ECL biosensor for determination of SOD was developed with a wide linear range of 5.0 × 10⁻⁸–5.0 × 10⁻⁶ mol/L with detection limit of 2.5 × 10⁻⁸ mol/L.     

A highly sensitive and selective resonance Rayleigh scattering method for Hg2+ based on the nanocatalytic amplification

In 0.2 mol/L HCl–0.22 mol/L HNO₃ medium, trace Hg²⁺ catalyzed NaH₂PO₂ reduction of HAuCl₄ to form gold nanoparticles (AuNPs), which exhibited a strong resonance Rayleigh scattering (RRS) effect at 370 nm. With increasing of [Hg²⁺], the RRS effect enhanced due to more AuNP generated from the catalytic reaction. Under the chosen conditions, the enhanced RRS intensity at 370 nm is linear to Hg²⁺ concentration in the range of 5.0–450 × 10⁻⁹ mol/L, with a detection limit of 0.1 nmol/L. This RRS method was applied for the determination of Hg in water samples, with high sensitivity and good selectivity, and its results were agreement with that of atomic fluorescence spectrometry.     

A quantitative colorimetric assay of H2O2 and glucose using silver nanoparticles induced by H2O2 and UV

A simple spectrophotometric assay of H2O2 and glucose using Ag nanoparticles has been carried out. Relying on the synergistic effect of H2O2 reduction and ultraviolet （UV） irradiation, Ag nanoparticles with enhanced absorption signals were synthesized. H2O2 served as a reducing agent in the Ag nanoparticles formation in which Ag＋ was reduced to Ago by O2- generated via the decomposition of H2O2 in alkaline media. On the other hand, photoreduction of Ag＋ to Ago under UV irradiations also contributed to the nanoparticles formation. The synthesized nanoparticles were characterized by TEM, XPS, and XRD. The proposed method could determine H2O2 with concentrations ranging from 5.0× 10^-7 to 6.0× 10^-5 tool/ L The detection limit was estimated to be 2.0 × 10^-7 mol/L. Since the conversion of glucose to gluconic acid catalyzed by glucose oxidase was companied with the formation of H2O2, the sensing protocol has been successfully utilized for the determination of glucose in human blood samples. The results were in good agreement with those determined by a local hospital. This colorimetric sensor thus holds great promises in clinical applications.     

Gas permeation properties of poly(lactic acid)

The need for the development of polymeric materials based on renewable resources has led to the development of poly(lactic acid) (PLA) which is being produced from a feedstock of corn rather than petroleum. The present study examines the permeation of nitrogen, oxygen, carbon dioxide, and methane in amorphous films of PLA cast from solution. The properties of PLA are compared to other commodity plastics and it is shown that PLA permeation closely resembles that of polystyrene. At 30°C, N₂ permeation in PLA is 1.3 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and the activation energy is 11.2 kJ/mol. For oxygen the corresponding values are 3.3 (10⁻¹⁰ cm³(STP) cm/cm² s cm Hg) and 11.1 kJ/mol. The values for carbon dioxide permeation are 1.2 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and 6.1 kJ/mol. For methane values of 1.0 (10⁻¹⁰ cm³ (STP) cm/cm² s cmHg) and an activation energy of 13.0 kJ/mol are found. Studies with pure gases show that polymer chain branching and small changes in l:d stereochemical content have no effect on permeation properties. Crystallinity is found to dominate permeation properties in a biaxially oriented film. The separation factor for a CO₂/CH₄ mixed gas system is measured between 0 and 50°C and does not deviate significantly from the calculated ideal separation factor; at 0°C the separation factor is 16, a value that suggests continued studies of PLA as a separation medium are warranted.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

Synthesis and surface activity of a novel heterodouble chained N-acyltaurate amphiphile

A novel double chained amphiphile,N-(α-4-hexylphenoxy)-lauroyltaurate(abbreviated as 10 6B-T),has been synthesized. The structures of main intermediate products and the title product were characterized by ~1H NMR.The new amphiphile shows high surface activity.The critical micelle concentration(cmc),which is 1.1×10~(-5)mol/L,is much lower than that of conventional double chained surfactants,such as sodium bis(2-ethylhexyl)sulfosuccinate(AOT).     

Electrospun zirconia-embedded carbon nanofibre for high-sensitive determination of methyl parathion

Carbon nanofibers embedded with ultrafine zirconia nanoparticles (ZrO₂-CNFs) are fabricated via a new methodology. Polyvinylpyrrolidone (PVP) and polymethylmethacrylate (PMMA) binary polymers containing zirconium n-butoxide are first dissolved in dimethylformamide, and the resulting solution is electrospun and heat-treated. The tetragonal zirconia nanoparticles formed, with a size of 5 ± 2 nm in diameter, are uniformly distributed in the carbon nanofibres. Using Nafion as an additive, ZrO₂-CNFs are drop-cast onto the glassy carbon electrode (ZrO₂-CNF/GCE) and the modified electrode is then applied to detect methyl parathion (MP) using differential pulse voltammetry. Two linear relationships are found at the concentration ranges of 1 × 10^− 9–2 × 10^− 8 g/L and 2 × 10^− 8–2 × 10^− 7 g/L, with a detection limit of 3.4 × 10^− 10 g/L (S/N > 3). The electrospun-based ZrO₂-CNF is a very promising coating material for electrochemical sensing of organophosphorus compounds.     

Electrochemical biosensor based on hairpin DNA probe using 2-nitroacridone as electrochemical indicator for detection of DNA species related to Chronic Myelogenous Leukemia

In this article, a new kind of hairpin DNA Electrochemical biosensor using nitroacridone as electrochemical indicator was first designed, and used to detect BCR/ABL fusion gene in Chronic Myelogenous Leukemia (CML). The results indicated that in pH 7.0 Tris–HCl buffer solution, the oxidation peak current was linear with the concentration of complementary strand in the range of 6.2 × 10⁻⁸–3.1 × 10⁻⁷ mol/l with a detection limit of 5.3 × 10⁻⁹ mol/l. This new hairpin DNA electrochemical biosensor demonstrates its excellent specificity for single-base mismatch and complementary (dsDNA) after hybridization, and this probe has been used for assay of PCR product of a real sample with satisfactory result.     

Highly selective thiocyanate electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) complex as neutral carrier

A novel selective thiocyanate PVC membrane electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) [Cu(II)₂–BBSTA] as neutral carrier is reported, which displays an anti-Hofmeister selectivity sequence in following order: SCN⁻ > ClO₄⁻ > I⁻ >Sal⁻ >SO₃²⁻ >NO₃⁻ > H₂PO₄⁻ > Cl⁻ >NO₂⁻ > SO₄²⁻. The electrode exhibits Nernstian potential linear range to thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ mol/l with a detection limit 7.0 × 10⁻⁷ mol/l and a slope of −57.0 mV/decade in pH 5.0 of phosphorate buffer solution at 25 °C. The response mechanism is discussed in view of the AC impedance technique and the UV spectroscopy technique. From comparison of potentiometric response characteristics between the binuclear metallic complex copper(II) [Cu(II)₂–BBSTA] and mononuclear copper(II) metallic complex [Cu(II)–BBSDA], an enhanced response towards thiocyanate from the electrode based on binuclear metallic complex copper (II) [Cu(II)₂–BBSTA] was observed. The electrode based on binuclear copper(II) compound was used to determine the thiocyanate content in waste water with satisfactory results.     

Enantioselective hydrogenation of ethyl pyruvate catalyzed by alumina support rhodium modified with quinine

Alumina supported rhodium catalyst using cinchonidine as a stabilizer exhibited excellent performance in the asymmetric hydrogenation of ethyl pyruvate with the addition of quinine. Quinine as a chiral modifier can not only induce the enantioselectivity, but also greatly accelerate the reaction. Under the optimum conditions: 293 K, 7.0 MPa of hydrogen pressure and 4.6 × 10⁻³ mol/L of quinine concentration in THF, TOF of Rh/2(cinchonidine)-γ-Al₂O₃ as catalyst and ee value of (R)-ethyl lactate can achieve 894 h⁻¹ and 71.6% ee, respectively.     

One-step fabrication of chitosan–hematite nanotubes composite film and its biosensing for hydrogen peroxide

This work reports on a novel chitosan–hematite nanotubes composite film on a gold foil by a simple one-step electrodeposition method. The hybrid chitosan–hematite nanotubes (Chi–HeNTs) film exhibits strong electrocatalytic reduction activity for H₂O₂. Interestingly, two electrocatalytic reduction peaks are observed at −0.24 and −0.56 V (vs SCE), respectively, one controlled by surface wave and the other controlled by diffusion process. The Chi–HeNTs/Au electrode shows a linear response to H₂O₂ concentration ranging from 1 × 10⁻⁶ to 1.6 × 10⁻⁵ mol L⁻¹ with a detection limit of 5 × 10⁻⁸ mol L⁻¹ and a sensitivity as high as 1859 μA μM⁻¹ cm⁻².     

Study on β-cyclodextrin inclusion of Zn(II) aromatic complex and its analytical application

A new β-cyclodextrin (β-CD) inclusion compound Zn(2H1NA)₂·2β-CD (2H1NA = 2-hydroxy-1-naphthoic acid) was prepared. The structure was characterized by ¹H NMR, IR, the fluorescence spectra, thermogravimetric analysis (TG–DTA) and elementary analysis. Meanwhile, the mechanism of the formation of the supramolecular system (2H1NA:Zn(II):β-CD) was studied and discussed by spectrofluorimetry. The results showed that the naphthalene rings of the Zn(II) aromatic complex Zn(2H1NA)₂ were encapsulated within the β-CD's cavity to form a 2:1 stoichiometry host–guest compound. The inclusion constant calculated was 1.27 × 10⁴ (L/mol)². A spectrofluorimetric method for the determination of 2H1NA in bulk aqueous solution in the presence of β-CD was developed based on the great enhancement of the fluorescence intensity of 2H1NA. The linear relationship was obtained in the range of 9.00 × 10^?7 to 2.50 × 10^?5 mol/L and the detection limit was 8.00 × 10^?7 mol/L. The proposed method was successfully applied to determine 2H1NA in waste water with recoveries of 97–104%.     

Electrochemical oxidation behavior of nitrite on a chitosan-carboxylated multiwall carbon nanotube modified electrode

A novel chitosan-carboxylated multiwall carbon nanotube modified glassy carbon electrode (MC/GCE) was developed to investigate the oxidation behavior of nitrite using cyclic voltammetry and differential pulse voltammetry modes. The electrochemical mechanism of the MC/GCE towards nitrite was discussed. The MC/GCE exhibited fast response towards nitrite with a detection limit of 1 × 10⁻⁷ mol l⁻¹ and a linear range of 5 × 10⁻⁷–1 × 10⁻⁴ mol l⁻¹. The possible interference from several common ions was tested. The proposed method was successfully applied in the detection of nitrite in real samples.     

Anodic electrochemiluminescent behavior of lucigenin on MWNT/GCE

The electrochemiluminescent (ECL) behavior of lucigenin on a multiwall carbon nanotubes modified glassy carbon electrode (MWNT/GCE) during anodic scanning was studied. A strong and stable anodic ECL signal was found on MWNT modified electrode, which results from the oxidation reaction between lucigenin and the oxidation production of OH^-. The effects of electrode materials, pH and scan rate on the ECL intensity were studied, and the possible ECL mechanism was also proposed. Under the optimized conditions, the ECL intensity was found to be linear with concentration of lucigenin in the range of 5.0 × 10^?7–5.0 × 10^?6 mol/L with a detection limit of 2.0 × 10^?7 mol/L. Superoxide dimutase (SOD) was found to be able to inhibit this ECL system, based on which a sensitive ECL methods for detection of SOD had been established.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.