SSRF前端区锯齿墙束流孔洞中子屏蔽的蒙特卡罗估算

主要关于上海同步辐射装置(SSRF)储存环电子引发产生的韧致辐射和中子辐射的研究. 中子和光子经多种组合材 料(厚度在5cm～115cm之间)屏蔽后的剂量特征由蒙特卡罗代码MCNP和EGSnrc估算得到; 蒙特卡罗计算表明, 单一的材料如铅, 铁和聚乙烯对高能中子是无效的生物屏蔽材料, 而组合材料如铅或者铁加聚乙烯和铅或者铁加混凝土被认为是屏蔽高能中子很好的组合材料. 铅铁等高Z材料加点包含有氢的低Z材料如聚乙烯是同时屏蔽高能中子和韧致辐射的一种比较好的组合材料选择.     

HL-2A中子相机屏蔽系统模拟

利用蒙特卡罗模拟程序,建立了HL-2A中子相机蒙特卡罗粒子输运(MCNP)物理模型,对D-D聚变中子和γ射线的屏蔽进行了模拟计算。对石蜡碳酸锂混合物、聚乙烯、铅和316L不锈钢4种常用中子慢化吸,收剂组成的屏蔽层材料的屏蔽效果进行了对比。计算结果表明,石蜡碳酸锂混合物和铅组合是中子相机的最佳屏蔽层材料,其中石蜡碳酸锂混合物用于慢化吸收中子,铅用于屏蔽中子和γ射线。此外,利用MCNP模拟计算得到了屏蔽中子和γ射线所需的屏蔽厚度,以及准直管的中子散射率。     

基于蒙特卡罗方法的中子屏蔽材料设计

基于蒙特卡罗粒子输运程序MCNP,设计了一种强度高、密度低、具有优异中子屏蔽性能的新型玻璃纤维/B4C/环氧树脂复合材料,模拟计算了镅-铍（Am-Be）中子源产生中子对该材料的透射率;研究了该材料的中子屏蔽性能与传统屏蔽材料的差异以及不同B4C质量分数对该材料的屏蔽性能影响;根据模拟结果分析了该材料对不同能区中子（慢中子、中能中子、快中子）具有的不同屏蔽性能。研究发现:B4C质量分数为10%的该种新型玻璃纤维/B4C/环氧树脂复合材料的中子屏蔽性能,尤其是慢中子屏蔽性能较传统的含硼聚乙烯和Al-B4C合金材料更为优异;但随着B4C质量分数的增大,屏蔽性能提升不明显。结果验证了蒙特卡罗方法用于中子屏蔽材料优化设计的可行性。     

中子、γ射线在稀土-高分子材料中的输运(英文)

为研究新型复合屏蔽材料的最佳厚度与各种成分最佳配比, 用MCNP计算了中子、 γ射线在稀土 高分子与重金属复合材料中的通量。 对中子、 γ射线在屏蔽体中变化规律进行了深入探索, 同传统复合屏蔽材料的屏蔽性能进行了对比。 结果表明, 中子和γ射线通过屏蔽体时, 其强度遵循指数衰减规律。 新型屏蔽材料对中子的屏蔽效果均优于铅硼聚乙烯, 对γ射线的屏蔽效果均劣于W Ni合金, 且并非稀土含量越高, 材料对中子辐射屏蔽能力越强。 A series of shielding analyses have been performed to estimate the material composition and optimum thickness required for a new radiation shield with various rare earth doped polymer and heavy metal mixtures. The neutron and γ photon fluxes have been calculated by Monte Carlo N Particle(MCNP) transport code. The results indicate that the relative fluxes of γ photon and neutron in both traditional and new composite materials follow an exponential decay rule with the distance of penetration. It can be seen that the composite material consisting of rare earth doped polymer and heavy metal has stronger neutron shielding performance than lead boron polyethylene, but weaker γ shielding effectiveness than W Ni alloy. It is also found that materials with more components of rare earth elements don’t always provide better neutron shielding performance.     

γ辐射多层组合屏蔽设计的仿真研究——Monte Carlo方法模拟

运用蒙特卡罗(Monte Carlo)方法,模拟研究七种γ辐射非均匀屏蔽组合(碳-硫,硼-硅,硅-铅,硫-铝,锂-铝,铝-铅,锂-铁)的防护性能,通过编写MCNP程序来计算防护屏蔽的透射率,并对比各种组合方法的优劣,进而确定最佳方案。同时对非均匀防护屏蔽模拟与理论、实验三者进行比较分析,说明三者结论的一致性,也说明了所用M-C方法来模拟组合屏蔽(非均匀屏蔽)的可行性和设计多层组合屏蔽设计的实际意义。     

(n,γ)反应实验研究中的中子屏蔽设计

用射线全吸收型装置(Gamma-ray Total Absorption Facility,GTAF),可以对中子俘获反应截面进行高精度测量。为了降低实验本底,实验中需要对源中子进行准直和屏蔽,还要对被样品散射的中子进行吸收以减少它们进入探测器后所形成的干扰。采用MCNP对中子的准直器、屏蔽体和中子吸收体进行了模拟设计,中子准直屏蔽体材料选用含硼聚乙烯(BC4 的质量分数为3%) 和铅。准直孔直径为13 mm,长度为500mm,经准直后样品处中子束斑坪顶直径为21 mm。中子吸收体材料选用聚乙烯和碳化硼,吸收体球壳内腔半径30 mm,聚乙烯壳层厚度60 mm,碳化硼壳层厚度10 mm,被样品散射的中子经吸收体后衰减93.7%。Neutron capture cross section can be measured by Gamma-ray Total Absorption Facility (GTAF) with high precision. To reduce the background of experiments, the neutron source must be collimated and shielded, and the neutrons scattered from the sample must be absorbed to minimise interference after they go into the detector. The shield, collimator and absorber were simulated and designed with MCNP code. Boron-ontainingpolyethylene with 3% BC4 and lead are used as the materials for the neutron collimator and shield. The diameter of the collimating aperture is 13 mm, and the length of the collimator is 500 mm. After being collimated, the diameter of neutron beam plateau at the sample position is 21 mm. The neutron absorber is made of polyethylene and BC4, and the thickness of polyethylene shell and BC4 shell are 60 and 10 mm, respectively. The simulated result shows that neutrons scattered from the sample can decay 93.7% through the neutron absorber.     

铅硼聚乙烯储源箱的屏蔽性能

由于铅对r射线的屏蔽效果非常明显，而含硼聚乙烯又是对中子漫化吸收的理想材料，所以在同时存在中子和r场的场所，从保证周围工作人员的安全出发，常用铅、硼、聚乙烯等混合材料制成屏蔽体。     

241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

利用韧致辐射诊断激光等离子体相互作用产生的超热电子

超短脉冲强激光与等离子体相互作用时产生的向靶内传输的超热电子在“快点火”方案中起着极其重要的作用.对于这部分向靶内传输的超热电子，韧致辐射方法是一种能有效、全面获得超热电子各方面信息的诊断方法.通过三维蒙特卡罗程序MCNP模拟了超热电子在靶材料中的输运以及它们在靶后方向产生的韧致辐射的性质，论证了韧致辐射诊断方法的可行性. 关键词： 超热电子 韧致辐射 诊断 MCNP程序     

铝基碳化硼材料中子屏蔽性能的蒙特卡罗模拟

采用蒙特卡罗方法, 运用MCNP4C程序研究了碳化硼含量20%–40%、中子能量200 eV–15 keV、材料厚度0.3–2 cm对B₄C/Al复合材料中子屏蔽性能的影响. 结果表明: 碳化硼含量与中子透射系数呈一次线性下降关系; 同含量的碳化硼, B₄C/Al材料的中子屏蔽效果要大大优于聚乙烯碳化硼材料; 在等厚度条件下, 模拟试样B20等的中子屏蔽效果要优于水、铜、混凝土等常规屏蔽材料; 材料厚度与中子透射系数呈指数下降关系, 且单位厚度的增加对中子透射系数改变很大; 含硼量对热中子透射系数影响很大; 在热中子能区, 中子每单位能量的变化对中子透射系数改变较大; 在慢中子能区, 中子每单位能量的变化对中子透射系数改变很小. 关键词： 中子透射系数 蒙特卡罗 铝基复合材料 碳化硼     

Use of CR-39 films for nuclear radiation shielding efficacy evaluation of lining materials for combat vehicles

All materials provide, to a lesser or greater extent, shielding against nuclear radiations. Armoured fighting vehicles (AFVs) have steel as the structural material, which appears to be a reasonably good gamma and neutron shield material but a shield of pure iron would not be equally effective against whole range of neutron energies as it has a few resonances in electron volt range, and it reduces energy of fast neutrons to lower energy neutrons. These neutrons will be absorbed through radiative capture and emit gamma radiations. Thus it is essential that an effective shield should contain a large amount of moderating material, hydrogen being preferred with low atomic number materials (B, C, Li) and lead (Pb) to ensure that the neutrons do not diffuse at intermediate energies in the shield as well as gamma attenuation will also take place. In order to have a suitable shield material for armoured vehicles which serves as neutron and gamma radiation attenuator, polyethylene polymer with fillers lining materials are preferred. These materials were evaluated against gamma and fast neutrons using radioactive sources for suitability to fitment into combat vehicle as per the requirement of protection factor values. The detector for gamma radiation was used as Nal(Tl) while for neutron, CR-39 film was used.      

高温堆乏燃料贮罐中子屏蔽性能计算

球床模块式高温气冷堆采用包覆颗粒球形燃料元件,在反应堆运行过程中,不断排出的乏燃料球将被装入乏燃料贮罐。乏燃料贮罐应选取适当的材料和厚度,对光子和中子进行有效屏蔽,使罐外的剂量率满足相应的限值要求。为此,使用张弛长度法和蒙特卡罗模拟法研究乏燃料贮罐的中子屏蔽性能。屏蔽材料为铁和含硼聚乙烯,计算了铁和不同B4C含量聚乙烯的屏蔽性能,并给出了乏燃料贮罐装满乏燃料球后,乏燃料球自吸收对贮罐外剂量率的影响。两种方法计算结果吻合很好,可以为实际工程中的屏蔽设计提供参考意见。     

球形黑腔辐射输运问题的蒙特卡罗模拟

利用蒙特卡罗方法模拟六孔球形黑腔中的辐射输运, 研究靶球辐照均匀性问题. 对于几何结构简单的解析模型, 研究了不同黑腔靶球半径比的靶球辐照均匀性变化规律, 得出的结论与解析的“视因子”方法给出的一致. 对于几何结构复杂的黑腔模型, 如放置有挡板的模型, 解析方法计算困难, 但利用蒙特卡罗方法仍然能够准确模拟计算. 不同挡板大小的理论模型计算结果表明, 挡板对X光输运到靶球表面的分布状况有明显的影响, 如果设置得当则可以提高X光利用效率并显著改善靶球辐照均匀性, 否则可能严重破坏靶球辐照均匀性. 因此, 黑腔中的挡板位置及大小需要精心设计. 应用表明, 蒙特卡罗方法对于具有复杂结构的黑腔辐射输运问题具有很好的适应性.     

HZE ion fragmentation cross-section sensitivity and propagated errors in HZE exposure estimates

It has long been recognized that galactic cosmic rays are of such high energy that they tend to pass through available shielding materials resulting in exposure of astronauts and equipment within space vehicles and habitats. Any protection provided by shielding materials result not so much from stopping such particles but by changing their physical character in interaction with shielding material nuclei forming, hopefully, less dangerous species. Clearly, the fidelity of the nuclear cross-sections is essential to correct specification of shield design and sensitivity to cross-section error is important in guiding experimental validation of cross-section models and database. We examine the Boltzmann transport equation which is used to calculate dose equivalent during solar minimum, with units (cSv/yr), associated with various depths of shielding materials. The dose equivalent is a weighted sum of contributions from neutrons, protons, light ions, medium ions and heavy ions using the ICRP-60 LET dependent quality factors. We investigate the sensitivity of dose equivalent calculations due to errors in nuclear fragmentation cross-sections. We do this error analysis for all possible projectile-fragment combinations (14,365 such combinations) to estimate the sensitivity of the shielding calculations to errors in the nuclear fragmentation cross-sections. Numerical differentiation with respect to the cross-sections will be evaluated in a broad class of materials including polyethylene, aluminum and copper. We will identify the most important cross-sections to ensure adequate experimental study and evaluate their impact on propagated errors in shielding estimates.     

Spherical warm shield design for infrared imaging systems

The F-number matching is the primary means to suppress stray radiation for infrared imaging systems. However, it is difficult to achieve exact F-number matching, owing to the restriction from detectors, or multiple F-number design. Hence, an additional shield is required to block the certain thermal radiation. Typical shield is called flat warm shield, which is flat and operates at room temperature. For flat warm shield, it cannot suppress stray radiation while achieving F-number matching. To overcome the restriction, a spherical reflective warm shield is required. First of all, the detailed theory of spherical warm shield design is developed on basis of the principle that stray radiation cannot directly reach the infrared focal plane array. According to the theory developed above, a polished spherical warm shield, whose radius is 18 mm, is designed to match an F/2 infrared detector with an F/4 infrared imaging system. Then, the performance and alignment errors of the designed spherical warm shield are analyzed by simulation. Finally, a contrast experiment between the designed spherical warm shield and two differently processed flat warm shields is performed in a chamber with controllable inside temperatures. The experimental results indicate that the designed spherical warm shield cannot only achieve F-number matching but suppress stray radiation sufficiently. Besides, it is demonstrated that the theory of spherical warm shield design developed in this paper is valid and can be employed by arbitrary infrared imaging systems.     

基于球面反射温阑的红外探测器变f数设计

制冷型红外探测器f数由冷阑尺寸和位置决定,在冷阑附近加温阑可以改变探测器f数,但是会引入大量杂散辐射.为解决这一问题,提出一种基于球面反射温阑的红外探测器变f数设计方法.建立了温阑红外辐射模型,分析普通平面温阑引入的杂散辐射及其对探测器性能的影响.在此基础上提出球面反射温阑的设计方法,通过改变表面形状和发射特性,降低温阑引入的杂散辐射,以保证探测器变f数后的性能.为验证本文方法,设计球面反射温阑和普通平面温阑改变某制冷型探测器f数,在高低温试验箱内进行辐射定标实验测量两种温阑引入的杂散辐射,比较二者对探测器的影响.分析和实验结果表明,球面反射温阑引入的杂散辐射远小于普通平面温阑,引入的噪声等效温差也较小,能够更好地保证红外系统的成像性能.     

Thermal radiative properties of carbon materials under high temperature and vacuum ultra-violet (VUV) radiation for the heat shield of the Solar Probe Plus mission

The Solar Probe Plus (SP+) mission will approach the Sun as close as 9.5 solar radii in order to understand the origin of the solar corona heating and the acceleration of the solar wind. Submitted to such extreme environmental conditions, a thermal protection system is considered to protect the payload of the SP+ spacecraft. Carbon-based materials are good candidate to fulfill this role and critical point remains the equilibrium temperature reached at perihelion by the heat shield. In this paper, experimental results obtained for the solar absorptivity α, the total hemispherical emissivity ? and its ratio α/?, conditioning the equilibrium temperature of the thermal protection system, are presented for different kinds of carbon materials heated at high temperatures with or without vacuum-UV (100 < λ < 200 nm) radiation. The synergistic effect of ion bombardment is also presented for one kind of material.