FT-IR, UV—visible and X-ray studies of complexes of pyridine N-oxides with pentachlorophenol

The crystal structure of the 4-methoxy-2,6-dimethylpyridine N-oxide·pentachlorophenol complex has been determined by X-ray analysis. The O ··· O distance is 2.439(6) Å, the OHO angle is 152.3° and the hydrogen-bonded proton is close to the phenol molecule. The FT-IR spectra of pentachlorophenol complexes with some substituted pyridine N-oxides in the solid state and seven aprotic solvents of different polarity (ε from 2.27 to 37.5) show a broad absorption. The broad absorption shows weak dependence upon solvent polarity and is classified as type (ii). UV spectra show that in the investigated complexes protons are not transferred from the phenol to the N-oxides. Formamide (ε = 111) is a much stronger proton acceptor than the pyridine N-oxides. Pentachlorophenol in formamide is converted to the phenolate ion.     

The synthesis of 1-amino-2-hydroxy- and 2-amino-1-hydroxy-substituted ethylene-1,1-bisphosphonic acids and their N-methylated derivatives

A synthesis of 2-amino-1-hydroxyethylene-1,1-bisphosphonic acid 3 has been developed from N-phthaloylglycine via dimethyl 2-(N-phthaloylamino)acetylphosphonate 1. The preparation of the N-methylated and N,N-dimethylated derivatives 4 and 5 has been achieved by the reaction of 3 with formic acid and formaldehyde. The synthesis of 1-amino-2-hydroxyethylene-1,1-bisphosphonic acid 9 (R=R′=H) and its N-methylated and N,N-dimethylated analogues has been achieved by the reaction of phosphorus trichloride and phosphorous acid with the appropriate O-benzyl protected hydroxyacetamide, followed by catalytic hydrogenolysis of the protecting group.     

Influence of the built-in pyridinium salt on asymmetric epoxidation of substituted chromenes catalysed by chiral (pyrrolidine salen)Mn(III) complexes

Chiral (pyrrolidine salen)Mn(III) complexes 1 with an N-benzoyl group and 2 with an N-isonicotinoyl group as well as the corresponding N-methyl (3) and N-benzyl (4) pyridinium salts of 2 were synthesized. The catalytic properties of 1–4 and 2 with excess CH₃I were explored to figure out the influence of the internal pyridinium salt in the catalyst on asymmetric epoxidation of substituted chromenes with NaClO/PPNO as an oxidant system in the aqueous/organic biphasic medium. The (pyrrolidine salen)Mn(III) complexes with an internal pyridinium salt, either formed in situ or isolated, displayed higher activities than analogous complexes 1, 2 and Jacobsen's catalyst in the aforementioned reaction, with comparable high yields and ee values. The acceleration of the reaction rate is attributed to the phase transfer capability of the built-in pyridinium salt of the (salen)Mn(III) catalyst. The effect of the internal pyridinium salt on the epoxidation of substituted chromenes is similar to that of the external pyridinium salts and ammonium halides.     

Intramolecular hydrogen bonds with large proton polarizability in semisalts of mono- and di-N-oxides of N,N′-tetraalkyl-o-xylyldiamines

Heteroconjugated NO⁺H … N NO … H⁺N and homoconjugated NO⁺H … ON NO … H⁺ON intramolecular hydrogen bonds formed in semisalts of mono- and di-N-oxides of N,N′-tetraalkyl-o-xylyldiamines were studied by IR and NMR spectroscopy. All these hydrogen bonds show large proton polarizability. In the case of the heteroconjugated hydrogen bonds the proton transfer equilibrium shifts from compounds 1 to 3 to the left hand side since the interaction of the hydrogen bond with the solvent environment decreases in this series of compounds. With compound 1 the hydrogen bonds are slightly weaker and longer, hence the wavenumber dependence of the intensity of the continuum caused by these hydrogen bonds is slightly changed with compound 1 compared with compound 2. In the case of compound 3 the intensity of the continuum decreases because of increasing screening of the hydrogen bonds. In the series of homoconjugated hydrogen bonds, from compound 4 to 6 the intense continuum vanishes, and only the band of the 0–1 proton transition at 950 cm⁻¹ remains. The vanishing of the continuum is caused by increasing screening of the hydrogen bonds against their solvent environments by bulky groups, and thus, this change demonstrates again that the interaction of the hydrogen bond with large proton polarizabilities is a necessary prerequisite for IR continua to appear.     

Diastereoselective and Enantioselective Synthesis of Multi-Functionalized Isoxazoline-N-Oxides through Asymmetric [4+1] Annulations

A diastereoselective and enantioselective formal [4+1] ylide annulation of chiral sulfonium salts with various substituted Morita-Baylis-Hillman (MBH) adducts leading to optically active isoxazoline N-oxides with three chiral carbon centers has been explored. The salient features of this methodology include a high diastereo- and enantioselective transformation, easily accessible starting materials, and mild reaction conditions. In addition, the isoxazoline N-oxides products can be conveniently transformed into functionalized compounds.     

Zr-TUD-1: A novel heterogeneous catalyst for the Meerwein–Ponndorf–Verley reaction

A series of Schiff-base complexes has been synthesized by the condensation of 1,2-diaminocyclohexane with salicylaldehyde, 2-pyridinecarboxaldehyde, and 2-hydroxy-1-naphthaldehyde, followed by the metallation with manganese (1, 2, 3a), cobalt (3b), copper (3c) and iron (3d) salts. These Schiff-base ligands L₁–L₃ and complexes 1, 2, 3a–d were then characterized by IR, ¹H NMR, ¹³C NMR, UV–vis spectra, and DSC measurement. Schiff-base Mn complex (3a) resulting from N,N′-bis(2-hydroxy-1-naphthalidene)cyclohexanediamine (L₃) ligand was considerably active for the catalytic epoxidation of styrene under mild conditions, in which the highest yield of styrene oxide reached 91.2 mol%, notably higher than those achieved from simple salt catalysts Mn(Ac)₂·4H₂O and MnSO₄·H₂O. However, another two salen–Mn complexes 1 and 2 derived from ligands N,N′-bis(salicylidene)cyclohexanediamine (L₁) and N,N′-bis(2-pyridine carboxalidene)cyclohexanediamine (L₂) exhibited relatively poor activity under identical experimental conditions.     

The Synthesis and Liquid Crystal Properties of Some 2,5-Disubstituted Pyridines

The synthesis is reported of fifteen three-ring 2,5-disubstituted pyridines and two pyridine-N-oxides where the pyridine rings carry a variety of alkyl, aryl, cyclohexyl, cyclohexylethyl and fluorinated-aryl substituents. The mesomorphic transition temperatures for these compounds have been measured; all the compounds show enantiotropic phases. The different substituent effects are discussed and comparisons are made with previous work on analogous systems where the hetero-function is replaced by C-F.     

Phototransformation products of the alkaloid lappaconitine: Multinuclear NMR study

The NMR technique has been applied to characterize the phototransformation products of the natural alkaloid lappaconitine. It was demonstrated that the photolysis of lappaconitine 1 results in cleavage of the ester bond with elimination of N-acetylanthranilic acid. The final reaction product was found to be an immonium salt 4 of N-acetylanthranilic acid and enamine 3. An equilibrium between the imine cation and the enamine 3 was detected.     

Synthesis of Some Novel Class of Bis(isoxazoline) and Bis(aziridine) Derivatives

Synthesis of some new bis(isoxazoline) derivatives has been described from terepthaldehyde derived bis(nitrones) using microwave irradiation via 1,3‐dipolar cycloaddition reaction. Bis(isoxazoline) derivatives in turn successfully converted into new bis(aziridine) derivatives via Baldwin rearrangement. Simple reaction methodology, non involvement of catalysts, and good to excellent yields are the important features noticed in this synthesis.     

Isoxazoline derivatives from activated primary nitrocompounds and tertiary diamines

Activated nitrocompounds, in the presence of dipolarophiles and a tertiary diamine (e.g., DABCO), undergo dehydration to afford directly isoxazoline derivatives, formal cycloadducts of nitrile oxides; this mild procedure is very efficient for the synthesis of the reported isoxazolines.     

Asymmetric synthesis of chiral spiro bis(isoxazoline) and spiro (isoxazole–isoxazoline) ligands

Asymmetric synthesis of novel chiral ligands, bis(isoxazoline) on a spiro[4.4]nonane scaffold and isoxazole–isoxazoline on a spiro[4.5]decane scaffold, has been achieved by utilizing an enantiomerically pure alcohol as the starting material.     

The analysis of serum effects on structure, size and toxicity of DDAB-DOPE and DC-Chol-DOPE lipoplexes contributes to explain their different transfection efficiency

The effect of serum on structural properties of dimethyl-dioctadecyl-ammonium bromide (DDAB)–1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) liposomes and DDAB–DOPE/DNA lipoplexes has been investigated by energy dispersive X-ray diffraction (EDXD) technique, at different cationic lipid/DNA weight ratios (ρ). The role of serum on the size of lipoplexes has also been studied by dynamic light scattering. Lipoplex transfection efficiency (TE) as a function of ρ, and lipoplex toxicity to C6 rat glioma cells have been evaluated in Dulbecco's Modified Eagle Medium (DMEM) with and without serum. A multi-parametric analysis concerning the role of size, structure and cytotoxicity on transfection efficiency contributes to explain the experimental observation that 3β-[N-(N′,N′-dimethylaminoethane)carbamoyl]-cholesterol (DC-Chol)–DOPE/DNA transfect C6 cells better than DDAB–DOPE/DNA lipoplexes.     

A new route to the synthesis of isoxazoline derivatives from dihydropyran via cycloaddition reaction in ionic liquid

A new approach to the synthesis and 1,3-dipolar cycloadditions of nitrones has been described from 2,3-dihydro-4H-pyran and various hydroxylamines, with electron-deficient alkynes for the synthesis of isoxazoline derivatives. Significant rate acceleration and improved yields of exclusively exo isoxazolines in 1-butyl-3-methylimidazolium based ionic liquids have been observed. Novel isoxazolines may be used as a precursor for the synthesis of variety of peptides.     

SOLID PHASE SYNTHESIS OF ISOXAZOLINES

1. INTRODUCTION A solid phase organic synthesis (SPOS) has increasingly attracted chemist抯 attention over the past decades [1~3]. It was found that the compounds with biological activity are mostly derived from heterocycle structures. It is therefore no…     

SOLID PHASE SYNTHESIS OF ISOXAZOLINES

The solid-phase synthesis of isoxazolines on 2-polystyrylsulfonamidoethanol resin isreported. 2-Polystyrylsuifonamidoethanol resin 1 was reacted with acryloyl chloride to afford2-polystyrylsulfonylamidoethyl acrylate resin 2, which was further reacted with brominatedaldoximes by [3+2] cycioaddition to give isoxazoline resin 4. Resin 4 was treated with aqueous 6mol/L HCI solution to obtain isoxazolines in good yield and purity.     

5C + 1S] annulation: a facile and efficient synthetic route toward functionalized 2,3-dihydrothiopyran-4-ones

[reaction: see text] A facile and efficient synthetic route toward highly substituted 2,3-dihydrothiopyran-4-ones 2 has been developed via a formal [5C + 1S] annulation of readily available alpha-alkenoyl ketene-(S,S)-acetals 1 with sodium sulfide nonahydrated salt (Na2S x 9H2O) and utilized in the synthesis of 2-(4-chlorophenyl)-6-(morpholin-4-yl)-4H-thiopyran-4-one 5l, an inhibitor of DNA-dependent protein kinase (DNA-PK).     

酸性离子液体催化合成N-氰乙基-N-羟乙基苯胺

N-氰乙基-N-羟乙基苯胺是一种具有广泛用途的染料中间体,针对传统合成方法中的缺陷,以1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO 4)为催化剂,丙烯腈和N-羟乙基苯胺为原料,建立了N-氰乙基-N-羟乙基苯胺的绿色合成新工艺。系统考察了离子液体种类、离子液体用量、底物比例等因素的影响规律,结果表明,[BMIM]HSO 4用量为0.8 mmol,n(N-羟乙基苯胺)∶[KG-*3/5]n(丙烯腈)=1∶[KG-*3/5]1.2,反应温度为90℃,反应时间为12 h时,N-氰乙基-N-羟乙基苯胺产率最高(89%),离子液体循环使用5次后,催化活性基本保持不变。     

Os(VIII)-catalysed oxidation of sulfides by sodium salt of N-chlorobenzenesulfonamide

Catalytic activity of Os(VIII) in the oxidation of some twenty organic sulfides with sodium salt of N-chlorobenzenesulfonamide (CAB) has been investigated in alkaline (pH8.7) t-butanol–water (1:1 v/v) medium. Significant retarding influence of [OH⁻] on the reactivity is exhibited. The catalysed reaction is strongly accelerated in the presence of Hg(II). Imperfections are observed in the linear Hammett relationship in the case of –NO₂ substituents.     

Effect of “topotactic” reduction product of molybdenum disulfide on catalytic activity of metallocene catalyst for olefin polymerization

N,N-Dimethylanilinium salt of molybdenum disulfide (MoS₂) was developed as a novel cocatalyst for metallocene catalysts. The cocatalyst is composed of N,N-dimethylanilinium ion as a cationic part and “topotactic” reduction product of MoS₂, obtained by acquisition of an electron by neutral host lattice of MoS₂ without structural alteration, as an anionic part. In ethylene polymerization, addition of the N,N-dimethylanilinium salt of MoS₂ to the bis(indenyl)zirconium dichloride (Ind₂ZrCl₂)/triethylaluminum (Et₃Al) catalyst improved the catalytic activity per mmol of Ind₂ZrCl₂. The catalytic activity of this system activated by addition of the cocatalyst depended significantly on the amount of the cocatalyst and the N,N-dimethylanilinium ion content in the cocatalyst. Poly(ethylene) and poly(ethylene-co-1-hexene) obtained with the metallocene catalyst activated by addition of the cocatalyst have typical features such as narrow molecular weight distribution and narrow composition distribution like polymers obtained with conventional metallocene catalysts.     

Cyano-bridged bimetallic complexes of copper(II) with tetracyanonickelate(II). Crystal structure of [Cu(dpt)Ni(CN)4]

Five new complexes of composition [Cu(dpt)Ni(CN)₄] (1) (dpt=dipropylenetriamine), [Cu(dien)Ni(CN)₄]·2H₂O (2) (dien=diethylenetriamine), [Cu(N,N′-dimeen)Ni(CN)₄]·H₂O (3) (N,N′-dimeen=N,N′-dimethylethylenediamine), [Cu(N,N-dimeen)Ni(CN)₄]·H₂O (4) (N,N-dimeen=N,N-dimethylethylenediamine) and [Cu(trimeen)Ni(CN)₄] (5) (trimeen=N,N,N′-trimethylethylenediamine) have been obtained by the reactions of the mixture of Cu(ClO₄)₂·6H₂O, appropriate amine and K₂[Ni(CN)₄] in water and have been characterized by IR and UV–Vis spectroscopies and magnetic measurements. The crystal structure of [Cu(dpt)Ni(CN)₄] (1) has been determined by single-crystal X-ray analysis. The structure of 1 consists of a one-dimensional polymeric chain ---Cu(dpt)---NC---Ni(CN)₂---CN---Cu(dpt)--- in which the Cu(II) and Ni(II) atoms are linked by CN groups. The nickel atom is four coordinate with four cyanide-carbon atoms (two cyano groups are terminal and two cyano groups (in cis fashion) are bridged) in a square-planar arrangement and the copper atom is five coordinate with two cyanide-nitrogen and three dpt-nitrogen atoms, in a distorted square-pyramidal arrangement. The temperature dependence of magnetic susceptibility (2–300 K) was measured for compound 1. The magnetic investigation showed the presence of a very weak antiferromagnetic interaction (J=−0.16 cm⁻¹) between the copper atoms within each chain through the diamagnetic Ni(CN)₄ ²⁻ ions.