An extended stress-based method for orientation angle optimization of laminated composite structures

Orientation optimization plays an important role in the lay-up design of composite structures.Earlier orientation optimization methods face the main problem of huge number of design variables.Recently,a patch concept is proposed to reduce the number of design variables.However,the traditional stress-based method can not deal with patch orientation optimization of composite structures.In this paper,we propose an extended stress-based method to deal with such problems.The considered problems are to minimize the mean compliance under multiple load cases or to maximize the eigenvalues of a composite structure.Four numerical examples are solved to demonstrate the efficiency of the new method.It is shown that the new method has the ability to deal with constraints on orientation angle,such as symmetric,antisymmetric and discrete orientation angle constraints.The iteration is less time-consuming because no sensitivity analysis is needed and a quick convergence rate can be achieved.     

Optimization of LiMn2O4 electrode properties in a gradient- and surrogate-based framework

In this study, the effects of discharge rate and LiMn2O4 cathode properties (thickness, porosity, particle size, and solid-state diffusivity and conductivity) on the gravimetric energy and power density of a lithium-ion battery cell are analyzed simultaneously using a cell-level model. Surrogate-based analysis tools are applied to simulation data to construct educed-order models, which are in turn used to perform global sensitivity analysis to compare the relative importance of cathode properties. Based on these results, the cell is then optimized for several distinct physical scenarios using gradient-based methods. The comple-mentary nature of the gradient-and surrogate-based tools is demonstrated by establishing proper bounds and constraints with the surrogate model, and then obtaining accurate optimized solutions with the gradient-based optimizer. These optimal solutions enable the quantification of the tradeoffs between energy and power density, and the effect of optimizing the electrode thickness and porosity. In conjunction with known guidelines, the numerical optimization frame-work developed herein can be applied directly to cell and pack design.     

Manufacturing tolerant topology optimization

In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in （uniformly） too thin （eroded） or too thick （dilated） structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization approach, under- and over-etching is modelled by image processing-based ＂erode＂ and ＂dilate＂ operators and the optimization problem is formulated as a worst case design problem. Applications of the method to the design of macro structures for minimum compliance and micro compliant mechanisms show that the method provides manufacturing tolerant designs with little decrease in performance. As a positive side effect the robust design formulation also eliminates the longstanding problem of one-node connected hinges in compliant mechanism design using topology optimization.     

Edge effects in the stress state of a thin elastic interlayer

The edge effects in the stress state of an interlayer in stretching and shearing by rigid slabs are studied. On the basis of the equations of momentless and moment elastic layers, we solve problems modeling qualitatively the stress-strain state in the “soft” layer between two “rigid” layers. Lavrent’ev Institute of Hydrodynamics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 40, No. 2, pp. 189–195, March–April, 1999.     

Block pivot methods for solving frictional contact problems

Based on elementary group theory, the block pivot methods for solving two-dimensional elastic frictional contact problems are presented in this paper. It is proved that the algorithms converge within a finite number of steps when the friction coefficient is “relative small”. Unlike most mathematical programming methods for contact problems, the block pivot methods permit multiple exchanges of basic and nonbasic variables. The project supported by the National Natural Science Foundation of China     

A semi-inverse algorithm in application of computer algebra

ProjectsupportcdbytheNationalNaturalScicnceFoundationofChinaandShanghaiMunicipalNaturaIScicnceF0undationI.Introducti0nCQmputeralgebra(i.e.,symbolic'computation)hasfounditswideapp1icationinscientificcomputationandengineeringana1ysis(cf.Refs.[1~31).Aswaspoi…     

Dynamical behavior of a mobile system with two degrees of freedom near the resonance

The design of mobile robots that can move without wheels or legs is an important engineering and technological problem.Self-propelling mechanisms consisting of a body that has contact with a rough surface and moveable internal masses are considered.Mathematical models of such systems are presented in this paper.First,a model of a vibration driven robot that moves along a rough horizontal plane with isotropic dry friction is studied.It is shown that by changing the off-resonance frequency detuning in sign,one can control the direction of motion of the system.In addition,a locomotion system which moves in an environment with anisotropic viscous friction is considered.For all models,the method of averaging to obtain an algebraic equation for the steady-state"average"velocity of the system is used. Prototypes were constructed to compare the theoretical results with experimental ones.     

Some properties of three-dimensional Biltrami flows

The investigation of Beltrami flows is important for the research on the mechanism of turbulent structure. In this paper the general solutions of the Beltrami flows are given, which depend explicitly on the solutions of three independent Helmholtz equations with scalar unknowns. Velocity fields of Beltrami flows can then be obtained explicitly after the application of some curl operations on the solutions of Helmholtz equations. On the basis of the exact solutions of Euler equations given above, we obtain one kind of exact solutions of non-steady Navier-Stokes equations which are also the Beltrami flows. Some interesting examples of Beltrami flows other than “ABC flows”, “Kolmogolov flows”, “Rayleigh-Bernard flows”, “Q-flows” are given. The detailed analytic results of these examples will be published in the near future.     

On variational features of vortex flows

Ideal incompressible fluid is a Hamiltonian system which possesses an infinite number of integrals, the circulations of velocity over closed fluid contours. This allows one to split all the degrees of freedom into the driving ones and the “slave” ones, the latter to be determined by the integrals of motions. The “slave” degrees of freedom correspond to “potential part” of motion, which is driven by vorticity. Elimination of the “slave” degrees of freedom from equations of ideal incompressible fluid yields a closed system of equations for dynamics of vortex lines. This system is also Hamiltonian. The variational principle for this system was found recently (Berdichevsky in Thermodynamics of chaos and order, Addison-Wesly-Longman, Reading, 1997; Kuznetsov and Ruban in JETP Lett 67, 1076–1081, 1998). It looks striking, however. In particular, the fluid motion is set to be compressible, while in the least action principle of fluid mechanics the incompressibility of motion is a built-in property. This striking feature is explained in the paper, and a link between the variational principle of vortex line dynamics and the least action principle is established. Other points made in this paper are concerned with steady motions. Two new variational principles are proposed for steady vortex flows. Their relation to Arnold’s variational principle of steady vortex motion is discussed.      

Measure-theoretic foundations of statistical mechanics

The basic formulas of classical equilibrium statistical mechanics are derived from well-known theorems in measure theory and ergodic theory. The method used is a generalization of the methods of Khinchin and Grad and deals with several, in fact a “complete set”, of “invariants” or “integrals of the motion”. Most of the results are simple corollaries of Birkhoff's ergodic theorem, and since time-averages are used, the whole approach is characterized by an absence of statistical “ensembles” and probability notions. In the course of the development a “generalized temperature” is introduced, and a generalization of the second law of thermodynamics is derived. Formulas for the “microcanonical”, “canonical”, and “grand canonical” distributions appear as special cases of the general theory.     

基于自适应多可信度多项式混沌-Kriging模型的高效气动优化方法

多可信度代理模型已经成为提高基于代理模型的优化算法效率和可信度水平最有效的手段之一.然而目前流行的co-Kriging和分层Kriging (HK)等多可信度代理模型泛化能力不足,缺乏对高阶/高非线性建模问题的适应性,难以广泛应用.文章基于发展的自适应多可信度多项式混沌-Kriging (MF-PCK)代理模型,在提高建模效率和对高阶/高非线性问题近似准确率的同时,建立了基于该自适应MF-PCK模型的高效全局气动优化方法.在发展的方法中,提出了基于MF-PCK模型的新型变可信度期望改进加点方法,使代理优化算法效率进一步提高.为了验证发展方法的全面表现,将其应用在经典的数值函数算例以及多个跨音速气动外形的确定性优化和稳健优化设计中,并与基于Kriging和HK模型的代理优化算法进行了全面比较.结果表明,发展的新型多可信度全局气动优化方法其优化效率相对于基于Kriging和HK模型的优化效率显著提高,结果更好也更加可靠,并且稳健优化设计效率和结果也更符合工程应用需求,证明了其相对于基于Kriging和HK模型的代理优化算法的显著优势.     

Initial layer phenomena for a class of singular perturbed nonlinear system with slow variables

The initial layer phenomena for a class of singular perturbed nonlinear system with slow variables are studied. By introducing stretchy variables with different quantity levels and constructing the correction term of initial layer with different “ thickness“, the Norder approximate expansion of perturbed solution concerning small parameter is obtained, and the “ multiple layer“ phenomena of perturbed solutions are revealed. Using the fixed point theorem, the existence of perturbed solution is proved, and the uniformly valid asymptotic expansion of the solutions is given as well.     

Poincaré and the shortcomings of the Hamilton-Jacobi method for classical or quantized mechanics

A great theorem was proven by H. Poincaré in celestial mechanics. It states that, in the most general problems of mechanics, the total energy of the system is the only well behaved first integral of the system, while other so-called integrals cannot be represented by uniform and convergent series. This very important result can be explained and visualized by comparison with standard methods of discussion, as, for example, the Hamilton-Jacobi procedure. The discussion shows that there are serious limitations to the use of this procedure, which collapses in the most general problems (Poincaré theorem) and can be used only for “almost separated” variables. The Poincaré theorem appears to provide the distinction between determinism in mechanics and statistical mechanics according to Boltzmann. The research presented here done under Contract Nonr 266(56) and was first described in a Quarterly Report dated July 31, 1959.     

Mathematical programming analysis of bilinear rheological lubrication mechanics

Bilinear rheological lubrication mechanics provides an important basis for the designs of recently developed electrorheological (ER) “smart”journal bearings and those lubricated by mixed fluid-solid lubricants. But there is not yet a reliable and efficient numerical method for such a problem of non-Newtonian fluid mechanics. In the present paper, a finite element method (FEM) together with mat hematical programming solution is successfully used to solve such a problem. A reliable and generalized numerical method for the designs of electrorheological “smart” journal bearings and the bearings lubricated by mixed fluid-solid lubricant is presented.     

Basic Concepts of Thermomechanics

This paper is intended to serve as a blueprint for the first few chapters of future textbooks on continuum mechanics and continuum thermomechanics. It gives precise intrinsic formulation of the laws of balance of forces and torques, balance of energy, and the concepts of temperature and entropy. They are intrinsic in the sense that they do not involve external frames of reference such as a “physical space”. In the end, an intrinsic reduced dissipation inequality is derived, which plays a crucial role in formulating frame-free constitutive laws.     

Excluded volume effects on the birefringence and stress of dilute polymer solutions in extensional flow

An algorithm is derived for calculating flow-induced birefringence using a bead-spring model with and without excluded volume effects. The simulation results for the bead-spring model compare well with experimental results for stress and birefringence in extensional flows of dilute solutions of polystyrene molecular weight 2 million in a filament-stretching device in both “theta” and “good” solvents (Orr and Sridhar 1999; Sridhar et al. 2000). In a “good” solvent, both stress and birefringence rise much more rapidly with strain than in a “theta” solvent, making extensional rheology a very sensitive indicator of solvent quality. Received: 7 December 1999 Accepted: 23 May 2000     

Gas-dynamic signs of explosive eruptions of volcanoes. 2. Model of homogeneous-heterogeneous nucleation. Specific features of destruction of the cavitating magma

The dynamics of state of the crystallite-containing magma is studied within the framework of the gas-dynamic model of bubble cavitation. The effect of crystallites on flow evolution is considered for two cases: where the crystallites are cavitation nuclei (homogeneous-heterogeneous nucleation model) and where large clusters of crystallites are formed in the magma in the period between eruptions. In the first case, decompression jumps are demonstrated to arise as early as in the wave precursor; the intensity of these jumps turns out to be sufficient to form a series of discrete zones of nucleation ahead of the front of the main decompression wave. Results of experimental modeling of an explosive eruption with ejection of crystallite clusters (magmatic “bombs”) suggest that a cocurrent flow of the cavitating magma with dynamically varying properties (mean density and viscosity) transforms to an independent unsteady flow whose velocity is greater than the magma flow velocity. Experimental results on modeling the flow structure during the eruption show that coalescence of bubbles in the flow leads to the formation of spatial “slugs” consisting of the gas and particles. This process is analyzed within a combined nucleation model including the two-phase Iordansky-Kogarko-van Wijngaarden model and the model of the “frozen” field of mass velocities in the cavitation zone. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 2, pp. 167–177, March–April, 2009.     

Rosetta Stone Experiments

Dynamic failure events such as armor penetration and explosive fragmentation are too complex to be treated by classical single-crack continuum fracture mechanics. In such cases deformation and fracture result from multiple cracks, voids, and shear bands acting simultaneously and influencing one another’s evolution. An alternative “meso” fracture mechanics is needed that treats microfailure activity while permitting fast and inexpensive predictive computations. This paper discusses the approach and experiments that elucidate and quantify failure physics on the micron level. “Rosetta Stone” experiments that isolate a damage mode, produce statistical distributions of damage features, and “freeze in” damage at various stages of development are described and illustrated. The observations and data lead to equations describing nucleation and growth of cracks, voids, and shear bands. The resulting mesomechanical material failure models link the microworld with the macroworld and can be used in continuum hydrocodes for fast, efficient simulations of dynamic fracture scenarios.

Studies of quality of geometrically nonlinear elasticity theory for small strains and arbitrary displacements

Earlier it was shown in [1, 2] that the equations of classical nonlinear elasticity constructed for the case of small strains and arbitrary displacements are ill posed, because their use in specific problems may result in the appearance of “spurious” bifurcation points. A detailed analysis of these equations and the construction, in their stead, of consistent equations of geometrically nonlinear theory of elasticity can be found in [3]. Certain steps in this direction were also made in [4, 5]. In [3], it was also stated that the methods and applied program packages (APPs) based on the use of the classical relations of nonlinear elasticity require some revision and correction. In the present paper, this conclusion is justified and confirmed by numerical finite-element solutions of several three-dimensional geometrically nonlinear deformation problems and linearized problems on the stability of equilibrium of a rectilinear beam. These solutions were obtained by using two APPs developed by the authors and the well-known APP “ANSYS.” It is shown that the classical equations of the geometrically nonlinear theory of elasticity, which underly the first of the developed APP and the well-known APP “ANSYS,” often lead to overestimated buckling loads for structural members as compared with the consistent equations proposed in [1–3].