PMMA-PAN核壳结构复合乳胶的制备与表征

采用疏水引发剂引发的半连续无皂乳液聚合法,合成了Z均流体力学直径约70nm的聚甲基丙烯酸甲酯(PMMA)纳米乳胶。以PMMA纳米乳胶为种子,采用疏水引发剂引发的种子乳液聚合法,制备了PMMA-聚丙烯腈(PAN)核壳结构复合乳胶。采用动态光散射、傅里叶红外光谱、扫描电镜和透射电镜表征了各种乳胶粒的组成、尺寸、结构和微观形态。研究了反应温度、单体用量和表面活性剂用量对PMMA-PAN复合乳胶粒的结构和形态的影响。结果表明:PMMAPAN复合乳胶粒为核壳结构,其壳层厚度可通过改变单体用量进行调整。     

氯丁胶乳-聚甲基丙烯酸甲酯复合乳胶粒结构形态

以氯丁胶乳（Pa）为种子乳液,甲基丙烯酸甲酯（Pb）为第二单体,采用种子乳液聚合法,制备了氯丁胶乳-聚甲基丙烯酸甲酯复合乳胶粒。 热力学分析表明,当Pb的体积分数Φb＜0.69时,可同时形成Pa-Pb型正核-壳和（Pa＋Pb）分离型乳胶粒,当Φb＞0.69时,形成Pb-Pa型翻转型核壳结构乳胶粒,并伴有Pa-Pb型正核-壳结构乳胶粒的形成。 动力学分析表明,引发剂类型、第二单体的加入方式、种子乳胶粒的交联、单体/聚合物质量比是影响乳胶粒形态的主要因素。 采用水溶性引发剂过二硫酸钾（KPS）,以饥饿态方式加入单体,氯丁胶乳 聚甲基丙烯酸甲酯(PCR-PMMA)复合乳胶粒呈现正核-壳结构,以充溢态方式加入单体则不能形成明显的核-壳结构;而以油溶性偶氮二异丁腈（AIBN）为引发剂时,单体无论以充溢态方式加入还是饥饿态加入均倾向于形成翻转核-壳型粒子。 在种子乳胶粒中加入一定量交联剂二缩三乙二醇二甲基丙烯酸酯,有利于形成明显的正核壳结构。 以饥饿态进料,KPS为引发剂时,随着单体用量增加,壳层变厚,仍呈正核-壳结构,与热力学分析结果相吻合;以AIBN为引发剂时,随着单体用量增加,PCR-PMMA复合乳胶粒逐渐由翻转核壳型结构变为互穿结构。     

MMA-BA-AA共聚反应中单粒径产物影响的研究

选择羧甲基纤维素(CMC)作为稳定剂,过硫酸铵为引发剂,采用种子乳液聚合的方法将甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸(AA)进行共聚合成了MMA-BA-AA共聚乳液。研究了羧甲基纤维素用量、引发剂用量、功能单体用量、单体用量和MMA/BA配比对乳液的影响。结果显示,羧甲基纤维素效果显著,既是稳定剂又是接枝底物,CMC用量为0.4%～0.5%,引发剂用量为0.2%～0.35%,丙烯酸AA用量为1%～2%,单体总量应低于45%,MMA/BA配比为1/1～9/7时,制备的乳液较好,且粒径分布呈单峰状态。     

荧光探针法研究核壳结构有机硅-丙烯酸酯乳液的聚合行为

以芘为荧光探针,探讨了有机硅-丙烯酸酯核壳乳液聚合过程中,芘的第一振动峰(373 nm处)与第三振动峰(384 nm处)荧光强度的比值I1/I3与乳化剂、有机硅单体(D4)和引发剂(KPS)用量之间的关系,并结合聚合过程中探针芘的I1/I3峰值与单体转化率及乳胶粒形态演变之间的关系,研究了核壳结构有机硅-丙烯酸酯乳液的聚合行为.研究结果表明,探针芘的I1/I3峰值随乳化剂用量,D4用量,KPS用量不同发生相应的变化,随单体转化率的增加而增大.当乳化剂用量、D4用量、KPS与总单体的质量比依次为2 g、8 g、0.7%时,得到的乳液具有优良的综合性能.聚合反应过程中,当种子乳胶粒转变为核壳乳胶粒时,芘的I1/I3峰值仍呈现出明显的转变,说明有机硅-丙烯酸酯核壳乳液具有互穿聚合物网络结构.因此,荧光探针可用于研究有机硅-丙烯酸酯核壳乳液聚合反应进程.     

核壳型聚丙烯酸酯乳胶粒子及其乳液的研究进展

综述了目前制备核壳型聚丙烯酸酯乳胶粒子的常用方法,如种子乳液聚合法、无皂乳液聚合法、反相乳液聚合法、细乳液聚合法以及种子分散聚合法;分析了聚合工艺、单体种类、温度、乳化剂和引发剂种类及用量等因素对聚丙烯酸酯核壳乳液合成及性能的影响;并对聚丙烯酸酯核壳乳液的研究现状进行了归纳;最后,展望了聚丙烯酸酯核壳乳液的发展方向。     

醇溶性聚丙烯酸酯乳液的合成及性能研究

以丙烯酸乙酯(EA)、甲基丙烯酸甲酯(MMA)和甲基丙烯酸(MAA)为主单体,采用过硫酸盐作引发剂,经预乳化乳液聚合工艺合成了聚丙烯酸酯乳液.讨论了乳化剂种类、单体种类以及功能性单体、引发剂加入工艺对乳液聚合过程及乳液产品性能的影响.结果表明:单体组成为m(MMA)∶m(EA)∶m(MAA)=45∶40∶15所得乳液聚合物能满足使用性能要求;种子引发剂加入质量控制在单体总质量的0.3%,而总的引发剂用量占单体总质量的0.8%较适宜.用差热分析仪和凝胶渗透色谱仪对乳液聚合物进行了表征.     

分散聚合制备羧基化单分散聚苯乙烯交联微球

以苯乙烯(St)、丙烯酸(AA)为单体,二乙烯基苯(DVB)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用分散聚合和交联剂后滴加法合成了单分散羧基化交联聚苯乙烯微球。通过傅立叶红外光谱(FT-TR),扫描电子显微镜(SEM),激光粒度及Zeta电位分析仪等对微球结构进行了表征。结果表明,引发剂、分散剂用量和交联剂的加入方式对微球粒径及单分散性影响显著,当St用量为15%(wt)、DVB用量为1%(wt)、AA用量为1%(wt)、AIBN用量为2%(wt)、PVP用量为6%(wt)时所制备的微球具有良好的单分散性和球形形貌,粒径达到4μm,且微球表面带负电荷。     

SiO2/聚甲基丙烯酸叔丁酯核壳复合微粒的制备与表征

以甲基丙烯酸-3-(三甲氧基硅基)丙酯(MPS)修饰的SiO2胶体粒子为种子,甲基丙烯酸叔丁酯(tBMA)为单体、十二烷基硫酸钠(SDS)为乳化剂,采用种子乳液聚合法制备了SiO2/聚甲基丙烯酸叔丁酯的核壳复合微粒。微粒经水解后形成具有pH敏感性的无机/有机复合微粒。研究了影响核壳复合微粒形态结构的因素,结果发现,控制SiO2种子乳液的质量分数在1.5%～2%,可避免聚合过程中生成纯聚甲基丙烯酸叔丁酯乳胶粒子;反应体系中乳化剂SDS的用量超过质量分数0.3%时,易形成纯聚合物乳胶粒子;SDS用量低于质量分数0.15%时,生成的核壳复合微粒易产生团聚;单体和交联剂用量升高,核壳复合微粒的壳层厚度增加,用量过高会导致核壳复合微粒出现团聚现象,并且有纯聚合物乳胶粒子生成。采用TEM、NMR和FTIR及接触角测试技术分析结果表明,复合微粒是由SiO和聚甲基丙烯酸叔丁酯组成的核壳结构微粒。     

高固含量低粘度丙烯酸酯乳液压敏胶的制备

采用常规种子乳液聚合法合成出了固含量为65%、粘度小于400mPa·s的乳液压敏胶,研究了共聚单体、乳化剂、引发剂、缓冲剂及种子乳液量对丙烯酸酯共聚物乳液粘度和聚合稳定性的影响。结果表明:含羧基和羟基的功能单体对乳液的粘度和聚合稳定性影响较大;乳液压敏胶粘度随乳化剂量在预乳化液中所占比例增大及种子乳液量的增大而增大,随引发剂过硫酸铵(APS)用量增大而降低,随缓冲剂碳酸氢钠在预乳化液中所占比例增大先增大后减小;乳液压敏胶的聚合凝胶率随乳化剂量在预乳化液中所占比例增大及种子乳液量降低而减小,当APS为单体量的0.3%,NaHCO3在预乳化液和反应中的比例为2/4时,乳液凝胶率最低。     

聚硅氧烷/丙烯酸酯核/壳复合胶乳的粒径分布与成核机理

通过种子乳液法合成出具有高有机硅含量核 壳结构的聚硅氧烷 丙烯酸酯复合粒子 .研究了聚合方法、乳化剂浓度、引发剂浓度、单体滴加速度等工艺条件对复合乳液粒径尺寸、分布与形态的影响 ,并对复合乳液的成核机理进行了探讨 .研究表明 ,乳化剂浓度对乳液粒子的粒径分布和形态、结构有显著影响 ,引发剂浓度增加将使粒子粒径减小 ;相对一次投料法 ,种子乳液法生成的粒子分布窄 ,具有明显核壳结构 ,通过壳层单体滴加速度可以控制粒子的粒径尺寸和分布 ;而壳层丙烯酸酯聚合物主要是在聚硅氧烷种子表面的“过渡层”聚合、富集而成 .     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.