无界域内拉普拉斯方程的分离变量法

分离变量法是求解有界域内数学物理方程定解问题的常用方法.首先用分离变量法求解上半平面内拉普拉斯方程的Dirichlet问题,在此基础上应用延拓技巧,求平面第一象限内拉普拉斯方程Dirichlet问题的解.     

二阶和四阶椭圆型偏微分方程的镜像基本解方法及应用

将基本解方法推广到二阶和四阶椭圆型偏微分方程的对称问题,在边界上不需要处理奇异积分.通过坐标变换,将一般二阶和四阶椭圆型偏微分方程化为目前研究较为成熟的调和或双调和方程.再根据镜像法构造出适合对称条件的基本解函数,简化了计算,且不影响计算的精度.通过数值计算结果可以看出,利用镜像技术构造出的基本解,前期准备数据少,可保持精度,是一种有效的数值方法.     

各向异性板半无限裂纹平面问题的保角变换解法

本文给出了各向异性板半无限裂纹平面问题的保角变换解.首先,简单介绍了各向异性板平面问题的基本理论.随后采用复变函数的方法,通过引用适当的保角映射研究了各向异性板半无限裂纹平面弹性问题,得到了各向异性板中半无限裂纹在任意面内集中载荷作用下的裂纹尖端的应力强度因子的解析解.最后,作为特例得到了当集中力作用在裂纹表面时的应力强度因子的解析解,依此验证了结果的正确性.结果表明该方法简单实用.     

整数规划中割平面法的研究

割平面法是求解整数规划问题常用方法之一.用割平面法求解整数规划的基本思路是:先用单纯形表格方法去求解不考虑整数约束条件的松弛问题的最优解,如果获得的最优解的值都是整数,即为所求,运算停止.如果所得最优解不完全是整数,即松弛问题最优解中存在某个基变量为非整数值时,就从最优表中提取出关于这个基变量的约束等式,再从这个约束式出发构造一个割平面方程加入最优表中,再求出新的最优解,这样不断重复的构造割平面方程,直到找到整数解为止.主要研究以下四个关键点:一是研究从最优表中提取出的、关于基变量的约束等式出发,通过将式中的系数进行整数和非负真分数的分解,从而得到一个小于等于0的另外一个不等式的推导过程;二是总结出从小于等于0的那个约束不等式出发构造割平面方程的四种方法;三是分析构造割平面方程的这四种方法相互之间的区别和联系;四是探讨割平面法的几何意义.通过对这四个方面的分析和研究,对割平面法进行透彻的剖析,使读者能够全面把握割平面法.     

带周期裂缝的弹性半平面问题

本文把具有任意形状和个数的周期裂缝的弹性半平面基本问题化为了某种特殊类型的奇异积分方程,证明了其解的存在和唯一。并对带周期共线直裂缝的弹性半平面问题,给出了封闭形式的解。     

Poincaré-Bendixson环域定理的推广

Poincare-Bendixson环域定理是平面动力系统最基本的结论之一,在应用上也极为重要.文献[3]指出,它基本上是由解的存在唯一性和Jordan定理这个简单的几何事实推得的.本文证明,当一个平面微分系统的解不满足唯一性时,Poincare-Bendixson环域定理的结论仍然成立.推广后的环域定理在应用上是方便的.在本文后半部分,我们考虑了Lienard方程的极限环的存在性问题,所得定理推广了著名的定理。     

椭圆型变分不等方程解的对称性和单调性

用移动平面法和区域滑动法证明了若干半线性和完全非线性椭圆型变分不等方程解的对称性和单调性．     

二维各向异性压电介质机电耦合场的基本解

本文研究各向异性压电介质的机电耦台问题．应用平面波分解法和留数定理，首次得到了线力和线电荷作用下一般二维各向异性压电介质机电耦合场的基本解．本文的解适用于平面问题、反平面问题以及平面和反平面相互耦合问题．作为特例，文中给出了横观各向同性压电介质的基本解．     

正交各向异性半平面内作用集中载荷的弹性解及边界元法常单元基本公式

本文采用镜相法,推导出了正交各向异性半平面作用集中载荷的理论解,给出了常单元系数矩阵表达式,为采用边界元法求解半平面问题提供了必要的公式.特解表达形式简洁,对边界元间接法常单元和高次单元各积分均可求出其原函数,可避免计算程序中的定积分数值计算过程.     

集中力作用下的半平面边缘裂纹问题

讨论了半平面中的倾斜裂纹问题。集中力作用于裂纹表面上,或作用于开裂半平面的边界上。利用有理保角映像函数方法求解这个问题,同时得到了闭合形式的解。最后,给出了二个数值例子和计算结果。     

Singular integral equation method for contact problem for rigidly connected punches on elastic half-plane

In the contact problem of a rigid flat-ended punch on an elastic half-plane, the contact stress under punch is studied. The angle distribution for the stress components in the elastic medium under punch is achieved in an explicit form. From obtained singular stress distribution, the punch singular stress factor (abbreviated as PSSF) is defined. A fundamental solution for the multiple flat punch problems on the elastic half-plane is investigated where the punches are disconnected and the forces applied on the punches are arbitrary. The singular integral equation method is suggested to obtain the fundamental solution. Further, the contact problem for rigidly connected punches on an elastic half-plane is considered. The solution for this problem can be considered as a superposition of many particular fundamental solutions. The resultant forces on punches are the undetermined unknowns in the problem, which can be evaluated by the condition of relative descent between punches. Finally, the resultant forces on punches can be determined, and the PSSFs at the corner points can be evaluated. Numerical examples are given.     

Multilevel methods for mixed finite elements in three dimensions

In this paper we consider second order scalar elliptic boundary value problems posed over three–dimensional domains and their discretization by means of mixed Raviart–Thomas finite elements [18]. This leads to saddle point problems featuring a discrete flux vector field as additional unknown. Following Ewing and Wang [26], the proposed solution procedure is based on splitting the flux into divergence free components and a remainder. It leads to a variational problem involving solenoidal Raviart–Thomas vector fields. A fast iterative solution method for this problem is presented. It exploits the representation of divergence free vector fields as s of the –conforming finite element functions introduced by Nédélec [43]. We show that a nodal multilevel splitting of these finite element spaces gives rise to an optimal preconditioner for the solenoidal variational problem: Duality techniques in quotient spaces and modern algebraic multigrid theory [50, 10, 31] are the main tools for the proof. Received November 4, 1996 / Revised version received February 2, 1998     

再论各向异性平面弹性中的一个周期接触问题——纪念李国平院士吴新谋教授诞辰100周年

该文对下面的一个弹性接触问题进行了再讨论.一列周期排列刚性压头压入一个各向异性弹性半平面的边界上,并有摩擦力存在, 求应力平衡.此问题在文献[1, 2]中曾讨论过并求出其解.但解法似不完全确切.该文将它进行修正从而获得精确解的封闭形式.     

A study on the method of fundamental solutions using an image concept

In this paper, both analytical and semi-analytical solutions for Green’s functions are obtained by using the image method which can be seen as a special case of method of fundamental solutions (MFS). The image method is employed to solve the Green’s function for the annular, eccentric and half-plane Laplace problems. In addition, an analytical solution is derived for the fixed-free annular case. For the half-plane problem with a circular hole and an eccentric annulus, semi-analytical solutions are both obtained by using the image concept after determining the strengths of two frozen image points and a free constant by matching boundary conditions. It is found that two frozen images terminated at the two focuses in the bipolar coordinates for the problems with two circular boundaries. A boundary value problem of an eccentric annulus without sources is also considered. Error distribution is plotted after comparing with the analytical solution derived by Lebedev et al. using the bipolar coordinates. The optimal locations for the source distribution in the MFS are also examined by using the image concept. It is observed that we should locate singularities on the two focuses to obtain better results in the MFS. Besides, whether the free constant is required or not in the MFS is also studied. The results are compared well with the analytical solutions.     

求解离散多准则决策问题的一种交互法

本文在 [1 ]的基础上发展了一种求解离散多准则决策问题的交互法 ,并举例说明其具体应用情况     

Computational experience using an edge search algorithm for linear reverse convex programs

This paper presents computational experience with a rather straight forward implementation of an edge search algorithm for obtaining the globally optimal solution for linear programs with an additional reverse convex constraint. The paper's purpose is to provide a collection of problems, with known optimal solutions, and performance information for an edge search implementation so that researchers may have some benchmarks with which to compare new methods for reverse convex programs or concave minimization problems. There appears to be nothing in the literature that provides computational experience with a basic edge search procedure. The edge search implementation uses a depth first strategy. As such, this paper's implementation of the edge search algorithm is a modification of Hillestad's algorithm [11]. A variety of test problems is generated by using a modification of the method of Sung and Rosen [20], as well as a new method that is presented in this paper. Test problems presented may be obtained at ftp://newton.ee.ucla.edu/nonconvex/pub/.     

Van der Pol方程周期解的分解算法

1 引言 动力系统周期解方程的研究是一个重要而有兴趣的问题,当系统周期解的方程能够写出来时,不但可以确定它的准确或近似位置,而且还可以研究当周期解因微分方程中的参数变动而消失时,它是否跑到二维复空间中去,对于人所熟知的van der Pol方程     

On the theory of dynamic thermoelasticity : PMM, vol. 42, no. 6, 1978, pp. 1093–1098

Use of the causality principle as radiation condition in dynamical problems of thermoelasticity is proposed. It follows from an analysis of the fundamental mathematical models describing the thermoelastic behavior of a continuous medium and used in the solution of specific problems, that some will yield physically unrealizable solutions. To eliminate the ambiguity in the solution which occurs, an approach is possible which has an explicit physical meaning and is based on the causality principle [1, 2]; it is required that the time source not yield a response earlier than the time of starting up of the source. Different kinds of radiation conditions of the Sommerfeld type are known in thermoelasticity problems [3 – 6].

To extract the unique solution in dynamical thermoelasticity problems, it is proposed in this paper to use the causality principle, which is equivalent to the requirement of analyticity of the solution in the upper half of the complex frequency plane; there are studied the analytic properties of the solutions of the fundamental boundary value problems for the models used most often for thermoelastic media, and there are made deductions about their physical realizability.     

Zur numerischen Lösung gewöhnlicher Differential-gleichungen mit Splines in einem Sonderfall

In an earlier paper [1] a general procedure has been presented to obtain polynomial spline approximations for the solution of the initial value problem for ordinary differential equations. In this paper the general procedure is described by an equivalent one step method. Furthermore two convergence theorems are proved for a special case which is not included in the general convergence or divergence theory given in [1].