“Direct” synthesis of unsolvated aluminum hydride involving Lewis and Bronsted acids

Unsolvated aluminum hydride has been synthesized by the “direct” reaction of aluminum bromide or sulfuric acid with an alkali metal tetrahydroaluminate at 90–102°C in pure toluene or in toluene containing 5–10 wt % diethyl ether. The reaction involving aluminum bromide yields a mixture of unsolvated aluminum hydride phases of poor quality. The reaction with sulfuric acid affords a single-phase product as α-AlH₃ at ≤90°C.     

Features of the Reaction of 5-aminoisoxazoles with diethyl 2-oxosuccinate. Synthesis of ethyl 6-hydroxy-isoxazolo[5,4-b]pyridine-4-carboxylates

Chemistry of Heterocyclic Compounds - Condensation of 5-aminoisoxazoles bearing substituents at position 3 with diethyl 2-oxosuccinate sodium salt in trifluoroacetic acid proceeded with the...     

Protonation of 2-quinolylthiazoles in the ground and excited states in ethanol

The protonation of some 2-quinolylthiazoles by trichloroacetic, trifluoroacetic, and sulfuric acids in the ground and excited states was studied in ethanol. The formation of the cations was found in the reaction with sulfuric acid. The formation of a mixture of cations and ionic pairs was found in the reactions with trichloroacetic and trifluoroacetic acids. The spectral-luminescence parameters of the reaction products obtained and the kinetic characteristics of the processes were determined.     

Enantioselective Michael addition of malonates to aromatic nitroalkenes catalyzed by monosaccharide-based chiral crown ethers

The asymmetric Michael addition of diethyl malonate and α-substituted diethyl malonates to aromatic nitroalkenes was carried out under mild reaction conditions in a solid–liquid phase transfer reaction in the presence of α-d-glucopyranoside- and α-d-mannopyranoside-based crown ethers as the catalysts. The use of d-glucose-based lariat ether 1 gave the best results. The substituents of the β-nitrostyrene and the diethyl malonate had a significant impact on the chemical yields and enantioselectivity. The addition of diethyl-2-acetamidomalonate to aromatic nitroalkenes afforded the corresponding Michael adducts in moderate to high enantiomeric excess (ee up to 99%). The reaction of diethyl-2-methylmalonate with 2-nitro-β-nitrostyrene gave the adduct with 93% enantiomeric excess in the presence of crown catalyst 1.     

Temperature-controlled Cascade Reaction of Phloroglucinoltribenzyl Ether Promoted by Trifluoroacetic Anhydride and Trifluoroacetic Acid

We report the first trifluoroacetic anhydride-and trifluoroacetic acid-promoted cascade reaction with phloroglucinoltribenzyl ether and carboxylic acid as starting materials. By simply varying the temperature of systems containing the same starting materials, different products were produced in high yields. A three-step consecutive reaction process was also proposed.     

Asymmetric Diels–Alder Reaction of α‐Substituted and β,β‐Disubstituted α,β‐Enals via Diarylprolinol Silyl Ether for the Construction of All‐Carbon Quaternary Stereocenters

The asymmetric Diels–Alder reaction of α‐substituted acrolein proceeds in the presence of the trifluoroacetic acid salt of trifluoromethyl‐substituted diarylprolinol silyl ether to afford the exo‐isomer with both excellent diastereoselectivity and high enantioselectivity. In the Diels–Alder reaction of a β,β‐disubstituted α,β‐unsaturated aldehyde, good exo‐selectivity and excellent enantioselectivity was obtained when the perchloric acid salt of the bulky triisopropyl silyl ether of trifluoromethyl substituted diarylprolinol was employed as an organocatalyst in the presence of water. In both cases, all‐carbon quaternary stereocenters are constructed enantioselectively.     

Gas-phase esterification of microfibrillated cellulose (MFC) films

The barrier properties of microfibrillated cellulose (MFC) films were improved by heterogeneous gas-phase esterification using various combinations of trifluoroacetic acid anhydride, acetic acid and acetic anhydride. The temperature, reagent ratio and reaction time were varied in the experimental design. The effects of two different purification procedures on the barrier properties of esterified MFC films were investigated. Washing with water did not affect the barrier properties compared to those of the films that were not washed, while the use of diethyl ether led to improved barrier properties as measured by the contact angle (CA) of water. The chemical composition of the modified films was studied by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Alterations in hydrophobicity and oxygen permeability were evaluated using dynamic CA and oxygen transmission rate measurements, respectively.     

杂萘联苯共聚醚砜的非均相磺化

以杂萘联苯共聚醚砜(PPHES)为原料,氯仿为溶剂,浓硫酸为磺化试剂,采用非均相磺化法对PPHES进行了磺化改性,得到了一系列不同磺化度的磺化杂萘联苯共聚醚砜(SPPHES).考察了浓硫酸浓度、磺化反应温度和时间等工艺条件对产物磺化度的影响.利用FT-IR、1H-NMR对SPPHES进行了表征.结果表明,磺酸基已成功引...     

<Emphasis Type="Italic">o</Emphasis>-Acylbenzonitriles: Synthesis and Heterocyclization under Acid Hydrolysis of the Cyano Group

2-Cyanobenzophenones were synthesized by reaction of 2-bromobenzophenones with copper(I) cyanide in DMF, and their transformations involving acid hydrolysis of the cyano group were studied. Reactions of o-benzoylbenzonitriles with trifluoroacetic acid in the presence or in the absence of sulfuric acid afforded 3-hydroxyphthalimidines in high yields. Under analogous conditions, benzonitriles having no acyl group in the ortho position were converted to the corresponding benzamides. 2-Cyanobenzophenones reacted with sulfuric acid in the absence of trifluoroacetic acid to give only substituted anthraquinones.     

Remarkable regioselective position-10 bromination of bacteriopyropheophorbide-a and ring-B reduced pyropheophorbide-a

Both bacteriopyropheophorbide-a and ring-B reduced pyropheophorbide-a on reacting with NBS (N-bromosuccinamide) undergo electrophilic bromination to provide 10-bromo analogs. The electronic nature of the substituents present at position-3 did not make any difference in the regioselective outcome of the brominated products. These relatively stable brominated chlorins and bacteriochlorins provide an easy way of introducing a wide variety of functionalities, which could be extremely useful in developing improved agents for biomedical applications and supramolecular chemistry.     

Experimental and Theoretical Studies of Bromination of Diethyl 2,4,6‐Trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate

A reaction of diethyl 2,4,6‐trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate with 1, 2, and more equivalents of N‐bromosuccinimide (NBS) in methanol was investigated by NMR spectroscopy at a temperature interval ranging from 25 to 40°C. The reaction was found to proceed through several steps. The structures of the intermediates diethyl 3‐bromo‐2,4,6‐trimethyl‐3,4‐dihydropyridine‐3,5‐dicarboxylate, diethyl 3‐bromo‐2‐methoxy‐2,4,6‐trimethyl‐1,2,3,4‐tetrahydropyridine‐3,5‐dicarboxylate, and diethyl 3,5‐dibromo‐2‐methoxy‐2,4,6‐trimethyl‐2,3,4,5‐tetrahydropyridine‐3,5‐dicarboxylate were identified by multinuclear (¹H, ¹³C, and ¹⁵N) NMR spectral data. The optimal structures of all species participating in the reaction as well as changes in their relative energies along with the proposed pathway of the reaction were analyzed by quantum‐chemical calculations. The mechanism of bromination of diethyl 2,4,6‐trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate with NBS in methanol was found to favor the bromination in the 2,6‐methyl side chains as the only products in full agreement with experimental observations.     

Readily hydrolysable cellulose esters as intermediates for the regioselective derivatization of cellulose; II. Soluble,highly substituted cellulose trifluoroacetates

Cellulose trifluoroacetate (CTFA) with DS values of 1.5 and 2.1 and DP values ranging from 170 to 800 have been prepared free from impurities of the reaction mixture (weakly bound trifluoroacetic acid) and of the procedure of isolation (diethyl ether). The CTFAs are soluble in DMSO, DMF, pyridine, and THF and thermostable up to 250 °C. A convenient synthetic method for CTFAs with DS 1.5 involves the acylation of cellulose with mixtures of trifluoroacetic acid (TFA) and trifluoroacetic anhydride (TFAA, 33% v/v) at room temperature for 4 h and subsequent treatment of the crude polymer at 150 °C and 80 Pa for 40 min. The preparation of CTFAs with DS-values up to 2.1 requires the addition of chloroform and 16 h reaction time.¹³ C-NMR studies as well as HPLC analyses after methylation and chain degradation show a preferred trifluoroacetylation of the primary hydroxy groups of the cellulose. The extent of depolymerization during the trifluoroacetylation was investigated for various cellulose materials. The cleavage of the trifluoroacetyl groups is possible by treating the derivative with a protic medium like water. Total hydrolysis of CTFA dissolved in DMF with water (room temperature) takes 6 min. The first paper on this topic was concerned with cellulose formates (Schnabelrauchet al., 1992).     

尿中3种苯氧羧酸类除草剂的气相色谱分析法

本文研究了2,4-滴、2,4-滴丙酸和2甲4氯3种苯氧羧酸类除草剂用硫酸、三氯化硼、氯化氢和三氟乙酸等4种催化剂的甲醇、乙醇、丙醇、丁醇、戊醇、苯甲醇、三氟乙醇、五氟丙醇、二氯丙醇和五氟苯甲醇等10种醇的酯化衍生反应条件,在此基础上建立了尿中3种苯氧羧酸类除草剂的各种衍生化气相色谱电子俘获检测方法,其中较灵敏的方法2,4-滴和2,4-滴丙酸的检出限低于10 ng/mL,2甲4氯的检出限低于20ng/mL,适于职业接触者和中毒者的尿分析。     

Spectrophotometric determination of traces of formic acid and formaldehyde in effluent waters with or without preconcentration

Formic acid plus formaldehyde are determined after reducing the acid with nascent hydrogen; formaldehyde alone is determined without reduction. The chromotropic acid method is used in 6–7.5 M sulfuric acid. The limit of determination is 0.05 μg ml^-1 without preconcentration and 0.05 ng ml^-1 with preconcentration by extraction with diethyl ether. Analysis time is 30 min by the direct method and 1 h with preconcentration.     

Synthesis and Diazotization of Diethyl 6-Amino-2-Hydroxyazulene-1,3-Dicarboxylate and Its 2-Acetoxyl Derivative

Diethyl 6-amino-2-hydroxyazulene-1,3-dicarboxylate ( 6a ) and 2-acetoxyl derivative ( 6b ) were synthesized by reduction of the 6-azido derivatives ( 5a,b ) with zinc/acetic acid in excellent yields. 5a and 5b were prepared by azidation of diethyl 2-acetoxy-6-bromoazulene-1,3-dicarboxylate (4). Diazotization of 6a with sodium nitrite in the presence of concentrated sulfuric acid in dioxane gave diethyl 2-hydroxy- ( 7a ), 2,6-dihydroxy- ( 8a ), and 2-hydroxy-6-[2-(2-hydroxyethoxy)ethoxy]-azulene-1,3-dicarboxylates ( 9a ), in 5, 35 and 20% yields, respectively. Similar reaction of 6b gave the corresponding acetates 7b, 8b , and 9b , compounds of the same type from 6a . No evidence for the formation of 6-diazo-1,3-diethoxycarbonyl-2(6H) azulenone ( 2b ) was obtained in the employed reaction conditions.     

A comparative study on direct production of ethyl levulinate from glucose in ethanol media catalysed by different acid catalysts

Direct production of ethyl levulinate (EL) from glucose catalysed by a liquid acid catalyst (sulfuric acid) and a solid acid zeolite catalyst USY NKF-7 (USY) in ethanol media was investigated in this study. Effects of the initial glucose concentration (C _G0), reaction temperature (T), amount of acid catalyst, and water addition on the yields of EL were compared, respectively. The results show that higher yield of EL can be obtained at lower C _G0. Higher temperature and acid concentration can accelerate the reaction rate, but the formation rate of the by-products increases more quickly than that of EL. Water addition also can result in the decrease of the yield of EL. Although sulfuric acid is efficient in the production of EL, the USY is more efficient in converting glucose to 5-ethoxymethyl-2-furaldehyde. Moreover, the use of USY can limit the diethyl ether production, and it can be reused for multiple times.     

氧头孢中间体的溴代反应研究

以6-APA(6-氨基青霉烷酸)为原料,经过苯甲酰化保护,硫的氧化,二苯甲酯保护,7位氨基异构化,开环重排,得到异丙烯基表唑啉。用NBS,溴素分别尝试进行溴代,最终得到两个溴代物异构体,并经过核磁共振氢谱对结构进行了确证。     

钝化芳环的溴化反应研究

研究了钝化芳环的溴化方法，对三氟甲基苯等一系列含有不同钝化基团的芳环 化合物用KBrO3-H2SO4直接溴化，取得了良好的结果。对影响该反应的因素，如硫 酸的浓度和用量、反应温度和不同钝化基团的影响等进行了分析。     

The sulfonation of crosslinked poly(ether ether ketone)—Diffusion‐controlled kinetics

The effect of crosslinks introduced by ion irradiation with 11.7 MeV proton and 30 MeV helium ions on the reactivity of poly(ether‐ether‐ketone) (PEEK) to sulfonation have been investigated following the kinetics of the reaction at room temperature. Concentrated sulfuric acid was used as a swelling and sulfonating agent and the reaction was followed by changes in the FTIR spectrum. The rate of reaction decreased with the degree of crosslinking and the progress with time was consistent with diffusion control of the sulfuric acid into the crosslinked matrix. The results were consistent with the efficiency of the ions in crosslinking PEEK and in particular with the differences in their linear energy transfer (LET). © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 775–783, 2009     

Synthesis of 4-halophosphaisocoumarins via halocyclization of 2-(1-alkynyl)phenylphosphonates

A series of 4-halophosphaisocoumarins were prepared with high regioselectivity in good to excellent yields under mild conditions by the reaction of 2-(1-alkynyl)phenylphosphonic acid diesters with I₂ in CHCl₃ or ICl in CH₂Cl₂, or by the reaction of 2-(1-alkynyl)phenylphosphonic acid monoesters with NBS or NCS in DMF. Whether the alkynylphosphonates could cyclize or not was affected by the substituents, reaction solvents and electrophiles. A rationale for this reaction is discussed.