共查询到20条相似文献,搜索用时 943 毫秒
1.
扫描电子显微镜(SEM)是研究材料形态、形貌的强有力工具,并广泛用于载体催化剂的研究[1~4].在工业化的烯烃聚合催化剂中,通常需要首先进行负载化,由于无机和有机载体各自具有特殊的优点并存在一些不利因素,如何利用不同类型载体进行复配获得性能优良的复合载体,已成为烯烃聚合催化剂载体化研究的一个重要方向.本工作合成了聚丙烯接枝马来酸酐(PMA)/SiO2复合载体,负载了TiCl4作为烯烃聚合催化剂,既可以避免由纯无机物为载体而引入过多的无机灰分,又能克服仅用聚合物为载体而造成的负载率不高的缺点,同时保持了无机载体固有的刚性和聚合物载体官能团多分布性的特点.该类复合载体制备工艺简单,原料易得,成本较低.为获得复合载体化催化剂形态及其对聚合产物形态影响的信息,我们采用扫描电子显微镜(SEM)跟踪催化剂和聚合物的形态,本文将报道该研究的初步结果. 相似文献
2.
壳聚糖作基因载体及其改性研究进展 总被引:1,自引:0,他引:1
基因载体是基因治疗的关键,病毒性基因载体在临床应用上暴露出一系列安全问题,非病毒性载体的研究成为当务之急。因其来源丰富、价廉、优良的物理化学和生物学特性,壳聚糖是当今最具潜力的非病毒性基因载体。近年来,壳聚糖作基因载体及其改性研究取得了长足的进展。本文重点从壳聚糖/基因复合物的大小、稳定性、靶向性及基因转染效率等方面概述了壳聚糖及其改性衍生物作基因载体的最新研究进展。 相似文献
3.
1引言研制中性载体PVC膜离子选择电极,关键是设计及选择合适的载体。杯芳烃衍生物作为高选择性载体已成功地用于离子选择电极上。本研究合成了两种新的对-叔丁基杯[4]芳烃磷酸酯类衍生物,以此化合物为载体制备了两种铅离子选择性膜电极,并对电极的性能进行了研究。2实验部分2.1 相似文献
4.
固定化血红蛋白氧载体的研究:Ⅰ.聚乙烯醇包埋血红蛋白 总被引:3,自引:0,他引:3
固定化血红蛋白可以作为氧载体,从海水中提取氧气,为人类在水下提供氧源。以聚乙烯醇为载体材料,固定化血红白、制备氧载体。研究了该氧载体的氧解离性能以及戊二醛和六磷酸肌醇对氧载体氧解离性能的影响。 相似文献
5.
6.
7.
本文研究了配合物与载体的相互作用。载体浸渍于配合物的溶液时,两者间的相互作用可分成四类:(1)无明显的化学作用;(2)配合物与载体通过桥联的配体作用;(3)载体阳离子与解离的配体作用;(4)载体促进金属水合离子的水解。 相似文献
8.
基于透明质酸构筑的药物递送载体及其应用 总被引:1,自引:0,他引:1
传统纳米药物控释载体主要通过细胞胞吞作用实现药物递送,其主要过程为被动靶向机制,因此会影响纳米载体在肿瘤组织的富集和治疗效果。近年来生物大分子透明质酸因其优异的水溶性、生物相容性、可降解性和肿瘤靶向性备受科研工作者青睐,已被广泛用于药物控释载体的构筑中,并成为靶向肿瘤治疗纳米载体领域的研究热点。本文根据透明质酸基纳米载体治疗机制的不同,从透明质酸基纳米载体在化疗、光热治疗、光动力治疗以及联合治疗的应用方面对其性能进行了总结和评述,并在此基础上展望了未来透明质酸基纳米治疗载体的研究方向和发展趋势。 相似文献
9.
10.
温度敏感性材料由于其理化性质对温度变化高度敏感,同时相变温度又易于调控,因而成为条件响应型药物控释载体中的研究热点。多种类型的温敏性药物载体,包括脂质体、聚合物囊泡、聚合物胶束,经过多年的研究和优化,其稳定性得到进一步的提高,而相变温度也实现了在较宽范围内的随意调整,可同时适用于病理性的高热和局部人工热疗等多种方式的温敏靶向性释药。并且,由于局部热疗可以有效控制温敏载体的药物释放,同时,热疗还能有效增强化疗药物的细胞毒性,因此温敏药物载体在肿瘤化疗和热化疗领域具有独特的应用潜力。本综述简要回顾了温敏性载体在药物载体领域的研究现状。在此基础上,从对肿瘤热化疗原理、发展现状、疗效影响因素的角度,进一步综述了温敏性药物载体在肿瘤热化疗领域的研究进展,特别关注了复合型温敏载体,因为这类载体结合了具有光热/磁热效应的纳米颗粒而兼具自升温能力,因而在靶向性热化疗中独具优势。最后,本文结合热化疗的影响因素,对温敏性载体在肿瘤热化疗领域的发展方向进行了展望。 相似文献
11.
The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted
indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator
model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was
established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing
analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom.
Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997. 相似文献
12.
Roraima is located in the extreme North of Brazil, in the Western Amazon Region. The groundwater has an important role in the public supply of potable water on the Roraima State. The objective of this work is the application of PCA (Principal Component Analysis) and HCA (Hierarchical Cluster Analysis) for the characterisation of tubular wells of the Roraima State, as regards physical–chemical composition of water. The parameters analyzed in laboratory were the following ones: pH, electric conductivity, Total Hardness, Total Alkalinity, Bicarbonate, Calcium, Potassium, Magnesium, Nitrate, Chloride, Total Iron. The physical–chemical analyses, were carried out during the months of September and October 2000 (winter, period of rains). The laboratory analysis was performed using classical methods (titrimetry and uv–visible spectroscopy), the samples were processed in agreement with the Standard Methods for Examination of Water and Wastewater.The physical–chemical analyses, were accomplished in September and October 2000. In physical–chemical terms, the groundwater samples analyzed do not indicate any restriction to human consumption and the two chemometric methods of exploratory data analysis: PCA and HCA are efficient for the discrimination of bicarbonated (tubular wells locateds in the South of the Roraima State) and not bicarbonated (tubular wells locateds in the North of Roraima) groundwater. 相似文献
13.
This research presents the combustion behavior of lignite under different reaction pressures. Lignite from Alpagut, Çorum of Turkey was combusted in its run off mine (ROM) condition under three different pressure levels of 172, 345, 517 kPa (25, 50, 75 psi). Experiments were done in a fully controlled temperature regime in an isolated combustion tube that operated in coordination with a continuous gas analyzer. Combustion behavior of lignite under different pressures was characterized by effluent gas analysis method. The changes in the amounts of consumed oxygen, evolved carbon oxides as well as variations in the temperature were assessed. The combustion efficiency and effectiveness of lignite was evaluated in terms of thermal features, from the viewpoint of reaction kinetics and by the computation of instantaneous fuel consumption at critical points. It was seen that combustion of lignite tended to turn from a steady profile to a considerably rapid one with increase in pressure, proving to be highly sensitive to the applied pressure level. Also, different levels of pressure resulted in distinctive combustion behavior not only from the view of thermal characteristics, but also in terms of reaction kinetics. 相似文献
14.
Stepkowska E. T. Perez-Rodriguez J. L. Jimenez de Haro M. C. Sayagues M. J. 《Journal of Thermal Analysis and Calorimetry》2002,69(1):187-204
Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, Mo, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
15.
The thermodynamics of adsorption has been studied of hydrolyzed modified polyacrylnitrile (HMP) in water solutions with a concentration ranging from 0.25 g/l to 2.00 g/l on bleached sulphate and unbleached and bleached sulphite celluloses at temperatures of 0, 20, 40, and 60 C.It has been established that with the rise in temperature, the amount of adsorbed polymer —(HMP) decreases. The values of the enthalpy change are negative and show a linear decrease with the increase in the amount of adsorbed polymer. The adsorption equilibrium is defined by the logarithmic isotherm of Tjumkin, valid for uniform heterogeneous surfaces.With the increase in the amount of adsorbed HMP the values of the entropy change become negative and linearly decrease. A compensation effect has been noticed which results from the simultaneous action of the entropy and energy factors.The values of the change of the chemical potential for the three types of cellulose are negative and linearly decrease with the increase in the amount of adsorbed HMP and with the rise in temperature. 相似文献
16.
青海湖区河谷灌丛主要植物微量元素含量特征 总被引:2,自引:0,他引:2
采集青海湖地区沙柳河河谷灌丛14种主要植物,采用AAS分析了其中7种微量元素含量。结果表明,元素Cu、Mn、Co含量有较大的植物种问差异,7种微量元素中Se含量最小,Fe含量最大。元素Mn和Fe、Co、Ni之间都具有极显著的正相关性,即相互之间具有协同性作用。 相似文献
17.
自由基聚合是《高分子化学》课程的重要一章 ,其中 ,平均聚合度是自由基聚合微观动力学的重要研究内容。正确理解其概念 ,掌握各种数学表达式的涵义 ,对高分子化学的学习十分有益 ,本文对不同终止和链转移情况下平均聚合度的表述方法进行了讨论 相似文献
18.
19.
20.
综述了近年来壳聚糖及其衍生物在处理工业废水中的应用.壳聚糖及其衍生物可处理工业废水中的重金属离子,如Cr(Ⅵ)、Cu(Ⅱ)和Zn(Ⅱ)等;可处理含染料的工业废水,如处理直接紫B、直接绿BE以及甲基橙等染料;还可用于处理印染、造纸和含油废水.壳聚糖及其衍生物具有易分离、可生物降解,无污染等特点,是绿色的水处理剂,且我国壳聚糖资源极为丰富,探索其在工业废水处理中的应用有着重要的价值. 相似文献