Effect of [Zn]/[S] ratios on the properties of chemical bath deposited zinc sulfide thin films

ZnS thin films have been prepared by chemical bath deposition (CBD) technique onto glass substrates deposited at about 80 °C using aqueous solution of zinc sulfate hepta-hydrate, ammonium sulfate, thiourea, ammonia and hydrazine hydrate. Ammonia and hydrazine hydrate were used as complexing agents. The influence of the ratio of [Zn]/[S] on formation and properties of ZnS thin films has been investigated. The ratio of [Zn]/[S] was changed from 3:1 to 1:9 by varying volumes and/or concentrations of zinc sulfate hepta-hydrate and thiourea in the deposition solution. The structural and morphological characteristics of films have been investigated by X-ray diffraction (XRD), scanning electron microscope and UV-vis spectroscopic analysis. ZnS films were obtained with the [Zn]/[S] ratio ranged from1:1 to 1:6. In the cases of [Zn]/[S] ratio ≥ 3:1 or ≤1:9, no deposition was found. Transparent and polycrystalline ZnS film was obtained with pure-wurtzite structure at the [S]/[Zn] ratio of 1:6. The related formation mechanisms of CBD ZnS are discussed. The deposited ZnS films show good optical transmission (80-90%) in the visible region and the band gap is found to be in the range of 3.65-3.74 eV. The result is useful to further develop the CBD ZnS technology.     

Investigation on the structural properties and correlation of the optical constants of Cd1-xZnxS thin films with bath deposition temperature

Cd_1-xZn_xS thin films were deposited by chemical bath deposition (CBD) technique, which is simple and cost effective, in a chemical bath containing appropriate amount of cadmium acetate, zinc acetate, and thiourea as precursors, in a clean glass substrate. The deposition was carried out by varying the bath temperatures (70 °C, 75 °C, 80 °C, and 85 °C) of the precursor solution. The XRD results indicate the existence of hexagonal structures of Cd_1-xZn_xS with an average crystallite size of ∼ 27–41 nm. EDX studies confirm the presence of Cd, Zn, and S in the films. HRTEM and SAED patterns show the crystalline nature of the films with the coexistence of the hexagonal phase. The optical constants viz; optical band gap, Urbach energy, static refractive index, and optical conductivity were studied by using UV- Vis transmission spectra as a function of CBD temperature. It was observed that with the increase of bath temperature in the above range, there were concomitant decreases in optical band gap from ∼3.3 to 2.8 eV. The Urbach energy, optical conductivity, and static refractive index of the films increase with the increase in bath deposition temperature. FTIR studies confirm the formation of ternary Cd_1-xZn_xS thin films.     

Nanostructured ZnO thin films by chemical bath deposition in basic aqueous ammonia solutions for photovoltaic applications

This paper presents further insights and observations of the chemical bath deposition (CBD) of ZnS thin films using an aqueous medium involving Zn-salt, ammonium sulfate, aqueous ammonia, and thioure. Results on physical and chemical properties of the grown layers as a function of ammonia concentration are reported. Physical and chemical properties were analyzed using scanning electron microscopy (SEM), X-ray energy dispersive (EDX), and X-ray diffraction (XRD). Rapid growth of nanostructured ZnO films on fluorine-doped SnO₂ (FTO) glass substrates was developed. ZnO films crystallized in a wurtzite hexagonal structure and with a very small quantity of Zn(OH)₂ and ZnS phases were obtained for the ammonia concentration ranging from 0.75 to 2.0 M. Flower-like and columnar nanostrucured ZnO films were deposited in two ammonia concentration ranges, respectively: one between 0.75 and 1.0 M and the other between 1.4 and 2.0 M. ZnS films were formed with a high ammonia concentration of 3.0 M. The formation mechanisms of ZnO, Zn(OH)₂, and ZnS phases were discussed in the CBD process. The developed technique can be used to directly and rapidly grow nanostructured ZnO film photoanodes. Annealed ZnO nanoflower and columnar nanoparticle films on FTO substrates were used as electrodes to fabricate the dye sensitized solar cells (DSSCs). The DSSC based on ZnO-nanoflower film showed an energy conversion efficiency of 0.84%, which is higher compared to that (0.45%) of the cell being constructed using a photoanode of columnar nanoparticle ZnO film. The results have demonstrated the potential applications of CBD nanostructured ZnO films for photovoltaic cells.     

Deposition of copper iodide thin films by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR) methods

In this paper, we report structural, morphological, electrical studies of copper iodide (CuI) thin films deposited onto glass substrates by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR) methods. CuI thin films were characterized for their structural, morphological and wettability studies by means of X-ray diffraction (XRD), FT-Raman spectroscopy, scanning electron microscopy (SEM), optical absorption, and contact angle measurement methods. Thickness of thin films was 1 ± 0.1 μm measured by gravimetric weight difference method. The CuI thin films were nanocrystalline, with average crystal size of ～60 nm. The FT-IR study confirmed the formation of CuI on the substrate surface. SEM images revealed the compact and cube like structure for CuI thin films deposited by CBD and SILAR methods, respectively. Optical absorption study revealed optical energy gaps as 2.3 and 3.0 eV for CBD and SILAR methods, respectively. Wettability study indicated that CuI thin films deposited by SILAR method are more hydrophobic as compared to CBD method.     

Chemical bath-deposited ZnS thin films: Preparation and characterization

Chemical bath deposition of ZnS thin films from NH₃/SC(NH₂)₂/ZnSO₄ solutions has been studied. The effect of various process parameters on the growth and the film quality are presented. The influence on the growth rate of solution composition and the structural, optical properties of the ZnS thin films deposited by this method have been studied. The XRF analysis confirmed that volume of oxygen of the as-deposited film is very high. The XRD analysis of as-deposited films shows that the films are cubic ZnS structure. The XRD analysis of annealed films shows the annealed films are cubic ZnS and ZnO mixture structure. Those results confirmed that the as-deposited films have amorphous Zn(OH)₂. SEM studies of the ZnS thin films grown on various growth phases show that ZnS film formed in the none-film phase is discontinuous. ZnS film formed in quasi-linear phase shows a compact and a granular structure with the grain size about 100 nm. There are adsorbed particles on films formed in the saturation phase. Transmission measurement shows that an optical transmittance is about 90% when the wavelength over 500 nm. The band gap (E_g) value of the deposited film is about 3.51 eV.     

Synthesis and characterization of nanostructural CuS–ZnS binary compound thin films prepared by spray pyrolysis

We have investigated the effect of zinc concentration ([Zn]/[Cu]=0–100 at%) on nanostructural, optical and electrical properties of CuS–ZnS binary thin films grown on glass substrate by the spray pyrolysis technique. X-ray diffraction analysis showed that the films were crystallized with mixed structures of CuS hexagonal and ZnS cubic structure. UV–vis optical measurements analysis showed that these binary films have a relatively high absorption coefficient (～10⁵ cm^?1) in the visible spectrum with a direct band gap in the range of 2.57–2.45 eV in agreement with the corresponding room temperature PL spectra. The electrical studies showed that all these samples have a p-type conductivity and the free hole density decreases with increasing [Zn]/[Cu] molar ratio, in agreement with the reflectance spectra of the layers, originating from plasma oscillations.     

A comparative study of thin films of Zn(O;OH)S and In(O;OH)S deposited on CuInS2 by chemical bath deposition method

In this work, a study of synthesis of thin films of Zn(O;OH)S and In(O;OH)S deposited by chemical bath deposition (CBD) is presented. The thin films of Zn(O;OH)S and In(O;OH)S were deposited from different chemical bath systems on absorber layers of CuInS₂ (CIS), indium tin oxide substrates (ITO) and soda lime glass substrates (SL). The differences on the growth rate, optical, morphological and structural properties of the thin films Zn(O;OH)S and In(O;OH)S are studied. The Growth studies showed that thin films of Zn(O;OH)S and In(O;OH)S grown faster on CIS than on SL and ITO substrates. The optical and morphological studies showed that both thin films present high transmittance in visible electromagnetic spectrum and covered uniformly the surface of the substrate, furthermore it was observed that thin films of Zn(O;OH)S and In(O;OH)S were polycrystalline. Finally, the results suggest that thin films of Zn(O;OH)S and In(O;OH)S obtained in this work could be used as buffer layer to replace the thin films of CdS, which are conventionally used as buffer layer in chalcopyrite based solar cells.     

Growth, structural and optical properties of CdxZn1−xS thin films deposited using spray pyrolysis technique

Cd_xZn_(1−x)S (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) thin films were deposited by the chemical spray pyrolysis technique using a less used combination of chemicals. Depositions were done at 573 K on cleaned glass substrates. The composition, surface morphology and structural properties of deposited films were studied using EDAX, SEM and X-ray diffraction technique. XRD studies reveal that all the films are crystalline with hexagonal (wurtzite) structure and inclusion of Cd into the structure of ZnS improved the crystallinity of the films. The value of lattice constant ‘a’ and ‘c’ have been observed to vary with composition from 0.382 to 0.415 nm and 0.625 to 0.675 nm, respectively. The band gap of the thin films varied from 3.32 to 2.41 eV as composition varied from x = 0.0–1.0. It was observed that presence of small amount of cadmium results in marked changes in the optical band gap of ZnS.     

低温硫化制备ZnS薄膜的物理性质研究

采用磁控溅射方法先在玻璃衬底上室温下沉积Zn金属薄膜,接着先后在200和400 ℃温度下的硫蒸气和氩气流中进行退火,生长出 ZnS 薄膜。薄膜样品的微观结构、物相结构、表面形貌和光学性质分别采用正电子湮没技术 (PAT)、X射线衍射仪 (XRD)、扫描电子显微镜 (SEM)和紫外-可见分光光度计进行表征。该ZnS薄膜在可见光范围具有约80%的高透光率,随着硫化时间的增加,其带隙由3.55 增加到3.57 eV,S/Zn原子比从0.54上升至0.89,薄膜质量明显得到改善,相对于以前报道的真空封装硫化所制备的ZnS薄膜,硫过量问题得到了较好解决。此外,慢正电子湮没多普勒展宽谱对硫化前后薄膜样品中膜层结构缺陷研究表明,硫化后薄膜的S参数明显增大,生成的ZnS 薄膜结构缺陷浓度高于Zn薄膜。     

Electrosynthesis and characterization of CdSe thin films: Optimization of preparative parameters by photoelectrochemical technique

CdSe thin films have been electrodeposited potentiostatically onto stainless-steel and fluorine-doped tin oxide-coated glass substrates from an aqueous acidic bath using cadmium acetate ((CH₃COO)₂Cd·2H₂O) as a Cd ion source. Preparative parameters such as deposition potential, solution concentration, bath temperature, pH of the electrolytic bath and deposition time have been optimized by using photoelectrochemical (PEC) technique to obtain well adherent and uniform thin films. The electrodeposits were dark brown in colour. The films have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical absorption techniques. XRD studies reveal that films are polycrystalline, with hexagonal crystal structure. SEM shows that the films are compact, with spherical grains. Optical absorption studies reveal that the material exhibits a direct optical transition having band gap energy ∼1.72 eV. PEC study shows that the films are photoactive.     

Effect of deposition parameters on structural, optical and electrical properties of nanocrystalline ZnSe thin films

This paper presents the chemical bath deposition of zinc selenide (n-ZnSe) nanocrystalline thin films on non-conducting glass substrates, in an aqueous alkaline medium using sodium selenosulphate as Se²⁻ ion source. The X-ray diffraction studies show that the deposited ZnSe material is nanocrystalline with a mixture of hexagonal and cubic phase. The direct optical band gap ‘E_g’ for the as-deposited n-ZnSe films is found to be 3.5 eV. TEM studies show that the ZnSe nanocrystals (NCs) are spherical in shape. Formation of ZnSe has been confirmed with the help of infrared (IR) spectroscopy by observing bands corresponding to the multiphonon absorption. We demonstrate the effect of the deposition temperature and reactant concentration on the structural, optical and electrical properties of ZnSe films.     

Effects of different deposition conditions on the properties of Cu2S thin films

Cu₂S thin films deposited on glass substrate by chemical bath deposition were studied at different deposition temperatures and times. The results of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray analysis (EDX), the Hall Effect measurement system and UV-Vis absorption spectroscopy indicate that both deposition temperature and time are important to obtain polycrystalline thin films. XRD showed that the polycrystalline Cu₂S thin films have monoclinic structure. Meanwhile, the structural variations were analyzed using SEM. EDX analysis results of the thin film showed that the atomic ratio of Cu/S was close to 2:1. It was found from the Hall Effect measurement that the resistivity varied from 4.59?×?10^?3 to 13.8?×?10^?3 (Ω?cm). The mobility values of the Cu₂S thin films having p-type conductivity varied from 15.16 to 134.6?cm²/V.s. The dark electrical resistivity measurements were studied at temperatures in the range 303–423?K. The electrical activation energies of Cu₂S thin films were calculated by using Arrhenius plots, from which two different activation energy values are estimated for each thin film. Using UV-Vis absorption spectroscopy (Ultraviolet/visible), the direct and indirect allowed optical band gap values were determined to lie between 2.16 and 2.37?eV and 1.79 and 1.99?eV, respectively. In addition, the values of the refractive index (n) and the extinction coefficient (k) were determined.     

Synthesis and characterization of Zn(O,OH)S and AgInS2 layers to be used in thin film solar cells

In this paper AgInS₂ and Zn(O,OH)S thin films were synthesized and characterized. AgInS₂ layers were grown by co-evaporation from metal precursors in a two-step process, and, Zn(O,OH)S thin films were deposited from chemical bath containing thiourea, zinc acetate, sodium citrate and ammonia. X-ray diffraction measurements indicated that AgInS₂ thin films grown with chalcopyrite structure, and the as-grown Zn(O,OH)S thin films were polycrystalline. It was also found that the AgInS₂ films presented p-type conductivity, a high absorption coefficient (greater than 10⁴ cm⁻¹) and energy band-gap E_g of about 1.95 eV, Zn(O,OH),S thin films presented E_g of about 3.89 eV. Morphological analysis showed that under this synthesis conditions Zn(O,OH),S thin films coated uniformly the absorber layer. Additionally, the Zn(O,OH)S kinetic growth on AgInS₂ layer was studied also. Finally, the results suggest that these layers possibly could be used in one-junction solar cells and/or as top cell in a tandem solar cell.     

Effect of preparation conditions on the microstructural characteristics and optical properties of oxidized zinc films

Thin films of zinc (Zn) were deposited onto glass substrates (maintained at room temperature) by thermal evaporation under vacuum. The metallic zinc films were submitted to thermal oxidation in air at 670 K and 770 K, respectively, for 5–90 min, in order to obtain zinc oxide (ZnO) thin films. X-ray diffraction patterns revealed that the ZnO thin films were polycrystalline and had a wurtzite (hexagonal) structure. The morphology of the prepared ZnO thin films was investigated using atomic force microscopy and scanning electron microscopy techniques. Transmission spectra were recorded in the spectral domain from 300 nm to 1400 nm. The optical energy bandgap calculated from the absorption spectra (supposing allowed direct transitions) was in the range 3.05–3.30 eV.     

Chemical bath deposition of SnO2 and Cd2SnO4 thin films

A new approach of chemical bath deposition (CBD) of SnO₂ thin films is reported. Films with a 0.2 μm thickness are obtained using the multi-dip deposition approach with a deposition time as little as 8–10 min for each dip. The possibility of fabricating a transparent conducting oxide layer of Cd₂SnO₄ thin films using CBD is investigated through successive layer deposition of CBD-SnO₂ and CBD-CdO films, followed by annealing at different temperatures. High quality films with transmittance exceeding 80% in the visible region are obtained. Annealed CBD-SnO₂ films are orthorhombic, highly stoichiometric, strongly adhesive, and transparent with an optical band gap of ～4.42 eV. Cd₂SnO₄ films with a band gap as high as 3.08 eV; a carrier density as high as 1.7 × 10²⁰ cm^?3; and a resistivity as low as 1.01 × 10^?2 Ω cm are achieved.     

Structural,optical and electrical properties of tin oxide thin films by electrostatic spray deposition

Tin oxide (SnO₂) thin films were deposited by electrostatic spray deposition (ESD). The structural, optical and electrical properties of the films for different solvents were studied. The morphology of the deposited thin films was investigated by scanning electron microscopy. The optical transmission spectra of the films showed 66–75% transmittance in the visible region of spectrum. The electrical resistivity of thin films deposited using the different solvents ranged 1.08 × 10^?3–1.34 × 10^?3 Ω-cm. Overall, EG and PG were good solvents for depositing SnO₂ thin films by the ESD technique with stable cone jet.     

Investigation of structural,optical and electrical properties of ZnS thin films prepared by nebulized spray pyrolysis for solar cell applications

Zinc sulfide (ZnS) thin films have been deposited on microscopic glass and fluorine doped tin oxide substrates by nebulized spray pyrolysis technique with different substrate temperature and molar concentration. The structural, morphological, optical and electrical properties of the prepared ZnS thin films have been studied using X-ray diffraction (XRD), field emission scanning electronic microscopy (FESEM), UV–Vis spectrophotometer and Hall effect measurement. XRD patterns confirm that the prepared films are hexagonal wurtzite structure, with (100) as preferred orientation. The structural parameters such as crystallite size, dislocation density and microstrain have been calculated from XRD study. Hydrophilic and hydrophobic nature is revealed by contact angle measurements. FESEM image of the ZnS thin films show smooth and uniform spherical grains are uniformly arranged on the films surface. Optical transmittance spectrum illustrate that the ZnS films were high transparent in the visible region and gets absorbed in the UV region. The optical band gap value of the ZnS thin films decreased with the increasing substrate temperature. The average transmittance is found to be 82% and direct band gap value is 3.56 eV at 400 °C for set D. The Activation energy of the prepared ZnS films was determined from the graph between ln (ρ) versus temperature (K^?1) using a four-probe method.     

Physical properties of ZnS thin films prepared by chemical bath deposition

Zinc sulphide thin films are deposited on SnO₂/glass using the chemical bath deposition technique. X-ray diffraction and atomic force microscopy are used to characterize the structure of the films; the surface composition of the films is studied by Auger electrons spectroscopy, the work function and the photovoltage are investigated by the Kelvin method. Using these techniques, we specify the effect of pH solution and heat treatment in vacuum at 500 °C. The cubic structure corresponding to the (1 1 1) planes of β-ZnS is obtained for pH equal to 10. The work function (Φ_material − Φ_probe) for ZnS deposited at pH 10 is equal to −152 meV. Annealing at 500 °C increases Φ_m (by about 43 meV) and induces the formation of a negative surface barrier. In all cases, Auger spectra indicate that the surface composition of zinc sulphide thin films exhibits the presence of the constituent elements Zn and S as well as C and O as impurity elements.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Electrosynthesis and characterization of Fe doped CdSe thin films from ethylene glycol bath

The CdSe and Fe doped CdSe (Fe:CdSe) thin films have been electrodeposited potentiostatically onto the stainless steel and fluorine doped tin oxide (FTO) glass substrates, from ethylene glycol bath containing (CH₃COO)₂·Cd·2H₂O, SeO₂, and FeCl₃ at room temperature. The doping concentration of Fe is optimized by using (photo) electrochemical (PEC) characterization technique. The deposition mechanism and Fe incorporation are studied by cyclic voltammetry. The structural, surface morphological and optical properties of the deposited CdSe and Fe:CdSe thin films have been studied by X-ray diffraction, scanning electron microscopy (SEM) and optical absorption techniques respectively. The PEC study shows that Fe:CdSe thin films are more photosensitive than that of undoped CdSe thin films. The X-ray diffraction analysis shows that the films are polycrystalline with hexagonal crystal structure. SEM studies reveal that the films with uniformly distributed grains over the entire surface of the substrate. The complete surface morphology has been changed after doping. Optical absorption study shows the presence of direct transition and a considerable decrease in bandgap, E_g from 1.95 to 1.65 eV.