Design of a stripline kicker for tune measurement in CSNS RCS

For CSNS RCS tune measurement, tune value is measured by exciting the bunch with a strip-line kicker fed with white noise and using a FFT algorithm. This article simulates the strip-line kicker in RCS and the efficiency of the kicker is discussed in a Matlab environment. The parameters of the kicker with an arc electrode structure such as a VSWR, wake impedance, and thermal state are analyzed based on the advantages of this design.     

p-PbTe的strip-line透射光谱研究

报道p-PbTe在深低温、强磁场下,不同远红外波长和晶体取向条件下的strip-line透射光谱。观察到一种新的对透射光谱的模式耦合影响。基于对这一复杂的模式耦合问题数学处理的解决,从实验光谱的拟合计算中得到p-PbTe的能带参量,进一步应用6能带的k·p模型解释了能带参量的光谱特性。 关键词：     

Lattice and electronic properties and g-value of Pb1−xSnxTe

The lattice dielectric property and the band edge structure in Pb_1-xSn_xTe are investigated by magnetoplasma reflection using a strip-line technique with several submillimeter laser lines, which are in the Reststrahlen region in the vicinity of the TO-phonon energy. The TO-phonon frequency, the dielectric constant and the effective mass in PbTe and Pb_0.7Sn_0.3Te at 4.2K are obtained. The additional new fine structure in PbTe is identified as a spin flip combined resonance from which we determine the effective g-value and its angular dependence.     

用于合肥光源200 MeV直线加速器束流位置测量的信号处理系统

 合肥光源(Hefei Light Source,HLS)200 MeV直线加速器的束流横向位置是一个重要的运行参数,直接决定注入的效率,为此新开发了一种非拦截型、高精度、易于将测量结果数字化的条带电极束流位置测量系统（beam position monitor, BPM）,该系统由条带电极和信号处理系统组成。信号处理系统选用对数比的信号处理方法,由带通滤波器（BPF）、对数检波模块、信号放大器、模数转换模块和上位机组成。带通滤波器选用中心频率为2.856 GHz、带宽为10 MHz的腔体滤波器,对数检波模块采用对数放大器AD8313芯片,模数转换模块采用NI公司的PXI-5102,上位机的数据采集程序采用Labview编写。本系统有效地采用了虚拟仪器（VI）的技术,具有模块化、开放性、易于交互、可扩展的特点,测试结果表明,其分辨率达到0.1 mm,符合设计要求。     

Cyclotron resonance in Pb1−xMnxTe

The cyclotron resonance in p-Pb_1?xMn_xTe with x up to 0.022 was investigated using a strip-line technique. Band-structure parameters at the L-point of the Brillouin zone were derived; the transverse effective mass increased strongly with increasing Mn content, and the anisotropy parameter decreased. An influence of the exchange interaction on the band structure was not distinctly observed.     

HLS-Ⅱ储存环工作点测量系统的开发（英）

介绍了在合肥光源重大维修改造工程期间,开发的一套基于扫频激励法的工作点测量系统。测量系统硬件包括基于条带BPM的信号拾取电极、前端信号调理模块、一台带跟踪输出的信号分析仪N9000AEP、功率放大器以及用于激励束流的条带激励器。系统控制软件采用EPICS开发,基于EPICS Stream Device设计的输入输出控制器(soft IOC)运行在服务器虚拟机中,通过VXI11协议进行通信实现对信号分析仪的控制和数据获取;用户操作界面采用EPICS平台下的EDM开发,通过Channel Access与IOC通信。在HLS-II储存环上对工作点测量系统进行了在线的调试。调试结果说明,在扫频范围为2.1 MHz到4.1 MHz时,工作点测量系统的统计分辨率在水平方向上好于0.000 3,在垂直方向上好于0.000 2。     

Resonantly enhanced strip-line technique to measure microwave permeability of thin films

The sensitivity of a reflective single-port strip-line technique is increased by 10-20 times by amplification of a measured reflectivity response at a set of resonance frequencies. The resonant behavior is organized by connecting the strip cell to a network analyzer through a capacitor with a long coaxial cable. The capacitance defines the amplification; the cable length defines the resonance frequencies. S-parameters of the coaxial-to-strip junction and the field inhomogeneity inside the cell are accounted for by a reference measurement of sample with known constitutive parameters. Two methods for permeability calculation are suggested. The fist method is based on the comparison of Lorentzian parameters of resonance reflectivity curves. The second method is based on numerical solution of Fresnel's equation. The enhancement is essential at low-frequency part of the band, where the cell reflectivity is close to unity and the sensitivity of non-resonant technique is poor. The technique sensitivity is estimated by permeability measurements of Al stripes with different cross-section.     

高功率双层径向线螺旋阵列天线实验研究

 介绍了高功率双层径向线螺旋阵列天线的模拟优化结果，对按照优化结构尺寸加工的阵列天线进行了实验研究。在实验中，设计了用于连接标准接口和天线输入口的阻抗变换器，对阵列天线辐射特性的测量采用了标准线极化天线比较法。实验结果表明：在3.8～4.2 GHz的频率范围内天线增益大于19.7 dB，口径效率大于42%，天线轴比小于4 dB，驻波系数小于1.6；实验结果与数值计算结果基本一致。     

基于超材料角反射面的高增益高效率双圆极化Fabry-Perot天线设计

基于射线跟踪模型,提出了一种超材料角反射面结构,实现了Fabry-Perot天线增益和口径效率的提升.首先对基于超材料角反射面的Fabry-Perot天线进行了理论推导和分析.然后,设计并分析了双圆极化馈源、基于超材料角反射面的Fabry-Perot天线及其性能.最后,对所提出的Fabry-Perot天线模型进行了制造和测试.结果表明,该天线的左圆极化增益和右圆极化增益分别为21.4 d Bi和21.3 d Bi.相比馈源天线,增益分别提高了16.4 d B和16.3 d B.与传统Fabry-Perot天线相比,所提出超材料角反射面同时充当了反射面和相位校正面,实现了对Fabry-Perot天线边缘电磁波的有效调控.所设计Fabry-Perot天线工作在2.8 GHz频段,具有高增益、高口径效率和低旁瓣的优点,满足了太阳射电望远镜F107指数观测的需求.     

C波段单层16单元矩形径向线螺旋阵列天线实验研究

 介绍了C波段单层16单元矩形径向线螺旋阵列天线的模拟优化结果,对按照优化结构尺寸加工的天线模型进行了实验研究。在实验中,利用设计的用于连接标准接口和耦合输入口的阻抗变换器,采用标准线极化天线比较法对阵列天线辐射特性进行了测试。实验结果表明：在3.8～4.2 GHz的频率范围内天线增益大于17 dB,口径效率大于74%,天线轴比小于 1.3 dB,驻波系数小于1.2,与数值计算结果基本一致。     

The U-Band Pattern Steerable Active Patch Antenna

Combing the active antenna concept with the reconfigurable antenna technique, a pattern steerable active patch antenna is presented and designed in this paper. A Gunn diode is used to generate the millimeter wave signal and loaded at the centre of the patch antenna. This antenna system has a stable oscillation frequency f : 44.0GHz and operates as a quasi-Yagi patch antenna. The radiation patterns of the antenna can scan in the whole horizontal plane with 3-db beam width by using four reconfigurable states and the radiation main beam of each state directs to the elevation angle 59° in the elevation-plane. The antenna can be applicable to the millimeter wave half-duplex communication and identification systems.     

A novel design using meshed-planar fan-electromagnetic bandgap (MP-FEBG) structure for ultra-wideband (UWB) antenna

A concept to combine the plane fan antenna with the meshed-planar electromagnetic bandgap (MP-EBG) structure is proposed; and then, based on the theory, a novel ultra-wideband (UWB) antenna with double-deck meshed-planar fan-electromagnetic bandgap (MP-FEBG) is designed. The structure of the sector is beneficial to the increase of the antenna bandwidth. The double layer structure can greatly reduce the size of the antenna, and the aperture structure can easily adjust antenna's performance. The antenna is compact in size, suitable for UWB applications. An antenna model was established on the substrate of FR4 and at least 79.1% dimension of the antenna was reduced by the traditional UWB antenna in the related documents. The simulation results show that the antenna can achieve a wide bandwidth from 3.20 to 15.78 GHz with return loss less than −10 dB and exhibit stable antenna gain. Furthermore, the measurement result is in better consistence with the simulation result.     

基于等离子体的定向天线阵理论与实验研究

当前国内学者对等离子体天线的研究主要集中于柱状天线和反射面天线, 而在国外已有学者以等离子体阵列结构设计了功能多样的智能天线系统. 为了较系统地了解这一新的设计思路, 基于等离子体散射理论对中心单元激励的圆形定向天线阵进行了理论和实验研究. 设计了一个16元等离子体无源振子的圆形天线阵, 实现了天线电磁波单波束和多波束的定向辐射. 通过理论计算和分析, 阐述了天线电磁波单波束和多波束辐射的原理. 通过建立实验系统, 测试了圆形天线阵的定向辐射特性. 实验结果和理论值接近, 说明该等离子体圆形天线阵可以实现天线电磁波的定向辐射和多波束辐射. 另外, 该天线阵还具有快速切换辐射方向、参数快速重构、雷达隐身性良好的优点. 关键词： 等离子体 定向天线阵 单波束 多波束     

三维洞穴环天线的耦合计算

在离子回旋共振加热中,对具有较复杂边界条件的洞穴环天线,通常为了简化计算忽略环天线水平分量的影响,按二维天线模型进行处理.给出了一种三维天线模型的详细计算过程,该模型与实际天线更加吻合,其计算结果可供洞穴环天线设计时参考. 关键词： 洞穴环 波加热 三维模型     

高增益宽带圆极化Vivaldi天线阵的设计

提出了一种由新型Vivaldi天线单元构成的22十字交叉圆极化天线阵。Vivaldi天线单元采用边缘渐变对拓的锯齿结构,提高了天线在4.7～7.0 GHz频带内的增益,其反射系数低于-10 dB的带宽为2.4～11.0 GHz,具有超宽带线极化特性。圆极化天线阵测量结果显示,在4.5～7.0 GHz频带范围内,其轴比均低于3 dB,且整个频带范围内增益达11～13 dBi。     

Analysis of space off-axis and performance of Cassegrain optical antenna system

The research of optical antenna is of greatest importance in the field of modern optical communication. For optical antenna, alignment of optical system is a significant factor, which influences the transmission quality of optical antenna system. Antenna off-axis is one of the important factors influencing the transmission quality of optical antenna system. In this paper, we analyze and numerically simulate how power attenuation ratio and gain of Cassegrain antenna vary with the antenna deflection angle and the distance that the central axis of receiving antenna deviates from z-axis, when space off-axis happens to the system. Finally, the coupling efficiency of Cassegrain antenna is tested experimentally, and the results show that the coupling efficiency of the Cassegrain antenna dramatically reduces in the case of off-axis. These studies provide a theoretical basis for optical antenna system to achieve accurate alignment in optical communication.     

一种自放电双锥天线激励电压的测量方法

采用一种通过测量脉冲源对天线的充电电流,来间接测量天线放电激励电压的方法。首先建立了实际电路的理论仿真模型,通过理论仿真证明了该方法的可行性。然后在双锥天线的不同绝缘工作气压下,对其充电电流进行了测量。由天线的充电电流推导出了在不同工作气压下天线的电压波形和放电激励电压。该种方法无需对天线进行改造,不会引进寄生参数,不会影响被试对象的工作状态,且在工程上易于实现。     

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide (SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38% (4.05 GHz-5.95 GHz) and AR bandwidth of 24.9% (4.4 GHz-5.65 GHz). The bandwidth of the high gain antenna can reach 42.7% (3.95 GHz-6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.     

Surface Discharges for Soft X-Ray Preionization in Light-Ion-Fusion Accelerators

We are investigating surface discharges as extreme ultraviolet (XUV) photon sources for preionizing anode surfaces of ion diodes in light-ion-fusion accelerators. Preionization is important both to control the diode impedance and to efficiently generate an ion beam. The surface discharges and their power feeds were constructed in a strip-line configuration to minimize overall system inductance. In some cases a 0.6-?F peaking capacitor was added to the circuit as close as possible to the surface discharge. These discharges radiated peak XUV powers of over 20 MW and total energies of over 5 J when driven by a low-energy (480 J) capacitor bank. These discharges were used to preionize the anode surface in an Applied-B diode on the Nereus accelerator (500 kV,40 kA). Preionizing a cleaned LiF anode with 60 kW/cm2 of XUV photons resulted in improved beam uniformity, flatter impedance profile, and a factor of 4 more ion beam energy coupled through the diode.     

宽波束双馈源超宽带抛物面天线设计与仿真

 针对单馈源超宽带抛物面天线波束较窄的问题，设计了一种宽波束双馈源超宽带抛物面天线。该抛物面天线是由一个普通的抛物面从中间对称分式，并在中间以平板连接而成的。馈源采用改进型平面TEM喇叭天线，同轴垂直馈电方式。两个馈源分别置于抛物面的两个焦点上。并利用时域有限差分数值方法分析了该天线的辐射性能。通过改变抛物面的结构，调节双馈源与天线主轴的夹角等方法可以有效改善天线的辐射性能。结果表明，所设计的宽波束双馈源抛物面天线可以在远区更宽的空间上形成峰值功率比较均匀的电磁脉冲，在不降低峰值功率的前提下有效地增加了波束的宽度；在抛物面天线两边进行少量切割不会对辐射场产生明显影响，节省了空间。