Vibrating tip spray ionization mass spectrometry for direct sample analysis

In this work, a vibrating tip spray ionization source was developed for direct mass spectrometric analysis of raw samples under voltage‐free condition. A solid tip was mounted on a vibrator, and the solid tip was placed on the front of MS inlet. Liquid, viscous, and bulk solid samples could be directly loaded on the tip‐end surface, and then a drop of solvent at microliter level was subsequently loaded on the tip for dissolution and extraction of analytes, and a vibrator was then started to atomize and ionize the analytes under ambient condition. We demonstrated vibrating tip spray mass spectrometry in various applications, including food safety, pharmaceutical analysis, and forensic science. Furthermore, in situ analysis of biological tissues and in vivo analysis of living plants were conveniently performed, due to voltage‐free. Different vibration frequencies and solvent compositions were investigated. The analytical performances, including sensitivity, reproducibility, and linear range, were investigated. The ionization process and mechanism were also discussed in this work.     

Analysis of Biological Samples Using Paper Spray Mass Spectrometry: An Investigation of Impacts by the Substrates, Solvents and Elution Methods

Paper spray has been developed as a fast sampling ionization method for direct analysis of raw biological and chemical samples using mass spectrometry (MS). Quantitation of therapeutic drugs in blood samples at high accuracy has also been achieved using paper spray MS without traditional sample preparation or chromatographic separation. The paper spray ionization is a process integrated with a fast extraction of the analyte from the raw sample by a solvent, the transport of the extracted analytes on the paper, and a spray ionization at the tip of the paper substrate with a high voltage applied. In this study, the influence on the analytical performance by the solvent–substrate systems and the selection of the elution methods was investigated. The protein hemoglobin could be observed from fresh blood samples on silanized paper or from dried blood spots on silica-coated paper. The on-paper separation of the chemicals during the paper spray was characterized through the analysis of a mixture of the methyl violet 2B and methylene blue. The mode of applying the spray solvent was found to have a significant impact on the separation. The results in this study led to a better understanding of the analyte elution, on-paper separation, as well as the ionization processes of the paper spray. This study also helps in establishing a guideline for optimizing the analytical performance of paper spray for direct analysis of target analytes using mass spectrometry.     

水凝胶涂覆纸喷雾离子化用于生物流体样品直接质谱分析

基于琼脂糖水凝胶涂覆的纸基质,实现了纸喷雾离子化,建立了一种新的纸喷雾离子化质谱技术,直接分析生物流体样品。利用纸表面涂覆的水凝胶材料限制液滴的扩散,使互不相溶的喷雾溶剂液滴与生物样品液滴之间形成液液萃取,提高了检测灵敏度。同时通过限制液滴扩散,减少了喷雾溶剂挥发面积,降低了挥发速度,获得了时间更长的稳定质谱信号,可对生物流体样品中的低丰度药物快速、准确定量。相较于常规纸喷雾离子化,该方法喷雾时间延长近10倍,分析物信号提高近100倍,定量分析全血和尿液中的药物,检出限可降低7~33倍。方法材料制备简单,方便快捷,灵敏度高,在现场临床诊断上具有很大的应用潜力。     

Open channel-based microchip electrophoresis interfaced with mass spectrometry via electrostatic spray ionization

The coupling between open channel-based microchip electrophoresis and mass spectrometry via electrostatic spray ionization is proposed for in situ detection of fractionated analytes. Electrophoretic separation is performed in an open channel fabricated in a plastic substrate. The solvent of background electrolyte is evaporated from the open channel because of Joule heating during electrophoresis, leaving the dried electrophoretic bands to be directly analyzed by mass spectrometry via scanning electrostatic spray ionization. Proof-of-concept results are obtained with fluorescent dyes and antibiotics as the test samples, demonstrating an efficient on-chip detection platform based on the electrophoresis and electrostatic spray ionization mass spectrometry.     

Rapid screening and determination of designer drugs in saliva by a nib‐assisted paper spray‐mass spectrometry and separation technique

A method for the rapid screening and determination of amphetamine‐type designer drugs in saliva by a novel nib‐assisted paper spray‐mass spectrometry procedure is described. Under optimized conditions, the limit of detections for amphetamine derivatives (model samples: o‐, m‐, p‐chloroamphetamine and o‐, m‐, p‐fluoroamphetamine, respectively) were determined to 0.1 μg/mL by the nib‐assisted paper spray‐mass spectrometry method. This method is easier and has a higher sensitivity than similar methodologies, including atmospheric pressure/matrix‐assisted laser desorption ionization mass spectrometry and electrospray‐assisted laser desorption ionization/mass spectrometry. Data obtained using more classical separation methods, including liquid chromatography and capillary electrophoresis, are also reported.     

Direct ionization methods in mass spectrometry: An overview

Within this paper a sub-group of ambient ionization mass spectrometry namely direct ionization mass spectrometry techniques are reviewed. They are characterized by the generation of an electrospray directly from the sample investigated. Prominent representatives include paper spray mass spectrometry, tissue spray mass spectrometry, probe electrospray ionization or thin-layer chromatography mass spectrometry. Applications of all major direct ionization techniques within different fields such as biomedical analysis, analysis of natural products, analysis of technical products and food analysis, just to name a few, are discussed and relevant parameters are listed in five Tables.     

常压敞开式离子化-离子迁移谱法快速筛查玩具中14种致癌致敏染料

采用常压敞开式离子化结合离子迁移谱技术,研究建立了蜡笔、水贴纸、橡皮泥等玩具样品中14种致癌致敏染料的快速筛查方法。无需繁琐的样品前处理过程,玩具样品经纸喷雾或萃取纳升喷雾,将上样、萃取、电离等步骤集成为一步实现,并在16 ms内完成了离子迁移谱分析检测。同时还对疑似阳性样品建立了超高效液相色谱-串联质谱的确证方法。14种致癌致敏染料的检出限为0.5~2 mg/kg。该方法流程便捷、快速高效,适用于玩具样品的现场快速筛查。     

High‐throughput determination of Sudan Azo‐dyes within powdered chili pepper by paper spray mass spectrometry

A high‐throughput mass spectrometric method is presented for the simultaneous detection of Sudan I, II, III, IV and Para‐Red azo‐dyes in foodstuff. The method is based on the use of paper spray mass spectrometry (MS) and deuterium‐labeled internal standards on a triple‐quadrupole instrument. A detailed assay of each azo‐dye was performed by the isotope dilution method, through the precursor ion scan approach, using deuterium‐labeled internal standards. The gas‐phase breakdown pattern of each labeled and unlabeled analogue displays the naphthoic moiety as a common fragment. Sudan dyes can be determined above the threshold of 1 ppm. Paper spray allows for a wide range of analytes and samples to be investigated by MS in the open air and without sample preparation and bypassing chromatography. Copyright © 2013 John Wiley & Sons, Ltd.     

Alleviation of ion suppression effect in sonic spray ionization with induced alternating current voltage

In this study, alleviation of ion suppression effect in sonic spray ionization mass spectrometry (SSI‐MS) was investigated. Ion suppression effect was firstly compared between electrospray ionization (ESI) and conventional SSI, and more severe ion suppression effect was observed with SSI. Ion suppression effect of SSI was also found difficult to be alleviated by simply optimizing major parameters. Alternatively, we found that with the assistance of an alternating current (AC) voltage with low amplitude, the ion suppression effect was greatly alleviated (comparable with conventional ESI). That AC voltage was applied outside the SSI spray tip, and no direct contact between the electrode and spray solution was necessary. Besides the alleviation of the ion suppression effect, this newly‐developed method, termed as induced electrosonic spray ionization (IESSI), appeared to preserve similar charge state distribution with SSI for protonated cytochrome c, hemoglobin, and bradykinin. IESSI could also obtain significantly improved ion intensities (~1000‐fold over conventional SSI). In addition, tolerance of concentrated salts for IESSI‐MS was investigated through the analysis of cytochrome c in the presence of concentrated sodium chloride (NaCl) or ammonium acetate (NH₄OAc). Copyright © 2014 John Wiley & Sons, Ltd.     

Forensic applications of ambient ionization mass spectrometry

This review highlights and critically assesses forensic applications in the developing field of ambient ionization mass spectrometry. Ambient ionization methods permit the ionization of samples outside the mass spectrometer in the ordinary atmosphere, with minimal sample preparation. Several ambient ionization methods have been created since 2004 and they utilize different mechanisms to create ions for mass-spectrometric analysis. Forensic applications of these techniques—to the analysis of toxic industrial compounds, chemical warfare agents, illicit drugs and formulations, explosives, foodstuff, inks, fingerprints, and skin—are reviewed. The minimal sample pretreatment needed is illustrated with examples of analysis from complex matrices (e.g., food) on various substrates (e.g., paper). The low limits of detection achieved by most of the ambient ionization methods for compounds of forensic interest readily offer qualitative confirmation of chemical identity; in some cases quantitative data are also available. The forensic applications of ambient ionization methods are a growing research field and there are still many types of applications which remain to be explored, particularly those involving on-site analysis. Aspects of ambient ionization currently undergoing rapid development include molecular imaging and increased detection specificity through simultaneous chemical reaction and ionization by addition of appropriate chemical reagents.     

Laser spray: electric field-assisted matrix-assisted laser desorption/ionization

A new liquid chromatography/mass spectrometry interface, the laser spray, has been developed. Explosive vaporization and mist formation occur when an aqueous solution effusing out from the tip of the stainless-steel capillary is irradiated from the opposite side of the capillary by a 10.6 microm infrared laser. Weak ion signals could be detected when the plume was sampled through the ion sampling orifice. When a high voltage (3-4 kV) was applied to the stainless-steel capillary, strong ion signals appeared. The ion abundances were found to be orders of magnitude greater than those obtained by conventional electrospray ionization in the case of aqueous solutions. The present method is regarded as an electric-field assisted form of matrix-assisted laser desorption/ionization in which the liquid chromatographic solvent (water, etc.) acts as a liquid matrix. Laser spray ionization is expected to become a versatile method for biological mass spectrometry because this method is compatible with the natural solvent, water.     

Rapid Determination of Adenine Arabinoside Monophosphate in Pharmaceutical Injections by Droplet Spray Ionization – Tandem Mass Spectrometry (DSI-MS/MS)

Abstract

Rapid analysis of pharmaceutical preparations is of great interest in clinical studies with benefits for identifying counterfeit drugs. In this study, droplet spray ionization tandem mass spectrometry (DSI-MS/MS) was developed for the rapid determination of adenine arabinoside monophosphate in pharmaceutical injections without complex sample pretreatment. The sample solution was loaded on the slip corner placed in front of the inlet of a mass spectrometer, and high voltage was applied to the solution to create a charged spray from the corner for MS analysis. The sample was loaded for analysis without additional sample preparation protocols, which greatly simplifies the operation. The limit of detection and limit of quantification were determined to be 2.7 and 9.1?ng/mL, respectively. The recoveries were in the range from 96% to 112%, and the calculated relative standard deviations were less than 7% for the DSI-MS/MS method. Three adenine arabinoside monophosphate pharmaceutical injection samples and a degraded sample obtained by acid treatment at 40?°C were successfully analyzed by directly dissolving and diluting the sample. Moreover, the sample-loading step required only 2?s. Together these capabilities indicate that the DSI-MS/MS is a simple and robust method and has promising applications in pharmacology studies without complicated sample pretreatment.     

Sensitivity improvement in ICP MS analysis of fuels and light petroleum matrices using a microflow nebulizer and heated spray chamber sample introduction

Reasons for signal suppression during the analysis of light petroleum matrices by inductively coupled plasma mass spectrometry (ICP MS) were examined. A decrease of the ionization efficiency of the plasma was found to be the principal factor responsible for this loss of sensitivity. Consequently, an interface based on a total consumption micronebulizer and a heated spray chamber was constructed to alleviate this problem. A method based on flow-injection ICP MS using this interface was developed for the direct multielement analysis of undiluted fuels (gasoline, kerosene) and gas condensates offering an increase in sensitivity by at least a factor of 3-4 in comparison with the existing setups.     

Quantitative determination of acetylcholine in microdialysis samples using liquid chromatography/atmospheric pressure spray ionization mass spectrometry

A fast, simple and sensitive liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed for the determination of acetylcholine in rat brain microdialysis samples. The chromatographic separation was achieved in 3 min on a reversed-phase column with isocratic conditions using a mobile phase containing 2% (v/v) of acetonitrile and 0.05% (v/v) of trifluoroacetic acid (TFA). A stable isotope-labeled internal standard was included in the analysis and detection was carried out with a linear ion trap mass spectrometer using selected reaction monitoring (SRM). Analyte ionization was performed with an atmospheric pressure chemical ionization (APCI) source without applying discharge current (atmospheric pressure spray ionization). This special ionization technique offered significant advantages over electrospray ionization for the analysis of acetylcholine with reversed-phase ion-pairing chromatography. The lower limit of quantification was 0.15 nM (1.5 fmol on-column) and linearity was maintained over the range of 0.15-73 nM, providing a concentration range that is significantly wider than that of the existing LC/MS methods. Good accuracy and precision were obtained for concentrations within the standard curve range. The method was validated and has been used extensively for the determination of acetylcholine in rat brain microdialysis samples.     

Protein analysis by desorption electrospray ionization mass spectrometry and related methods

Desorption electrospray ionization mass spectrometry (DESI‐MS) requires little to no sample preparation and has been successfully applied to the study of biologically significant macromolecules such as proteins. However, DESI‐MS and other ambient methods that use spray desorption to process samples during ionization appear limited to smaller proteins with molecular masses of 25 kDa or less, and a decreasing instrumental response with increasing protein size has often been reported. It has been proposed that this limit results from the inability of some proteins to easily desorb from the surface during DESI sampling. The present study investigates the apparent mass dependence of the instrumental response observed during the DESI‐MS analysis of proteins using spray desorption collection and reflective electrospray ionization. Proteins, as large as 66 kDa, are shown to be quantitatively removed from surfaces by using spray desorption collection. However, incomplete dissolution and the formation of protein–protein and protein–contaminant clusters appear to be responsible for the mass‐dependent loss in sensitivity for protein analysis. Alternative ambient mass spectrometry approaches that address some of the problems encountered by spray desorption techniques for protein analysis are also discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

固相基底电喷雾电离质谱分析固状与粘稠状药物的基质效应

固状与粘稠状辅剂常用于制造颗粒、片剂、胶囊或膏状药品,并能有效地保持药效成分活性的稳定性。基于固相基底的敞开式电喷雾电离质谱技术已被发展用于药品的直接分析。然而,固状与粘稠状基质对药物分子直接质谱检测的影响规律还不明确。该研究构建了不同黏度和不同溶解度的基质体系,采用木签(牙签)为代表的固相基底电喷雾电离质谱考察了几种模式药物分子在固状与粘稠状基质中的质谱响应规律。结果发现,易溶解的基质电离产生显著的离子干扰和抑制效应,而难溶的基质尽管不产生离子干扰,但在溶剂作用下可变成粘稠状从而抑制药物的离子化。进一步研究表明,药物分子的质谱信号随着基质的黏度增加(1~500 cP)呈幂函数降低(r 2>0.95)。该研究将增进理解固体与粘稠样品直接质谱分析的基质效应与信号响应规律。     

Determination of triamcinolone in human plasma by a sensitive HPLC-ESI-MS/MS method: application for a pharmacokinetic study using nasal spray formulation

A liquid chromatography-electrospray ionization tandem mass spectrometry (HPLC-ESI-MS/MS) method for the quantitation of triamcinolone in human plasma after nasal spray application was developed and validated. Betamethasone was used as internal standard (IS). The analytes were extracted by a liquid-liquid procedure and separated on a Zorbax Eclipse XDB C(18) column with a mobile phase composed of 2 mM aqueous ammonium acetate pH 3.2 and acetonitrile (55:45). Selected reaction monitoring was performed using the transitions m/z 435 → 415 and m/z 393 → 373 to quantify triamcinolone acetonide and betamethasone, respectively. Calibration curve was constructed over the range of 20-2000 pg/ml for triamcinolone acetonide. The lower limit of quantitation was 20 pg/ml. The mean RSD values were 4.6% and 5.7% for the intra-run and inter-run precision, respectively. The mean accuracy value was 98.5% and a recovery rate corresponding to 97.5% was achieved. No matrix effect was detected in the samples. The validated method was successfully applied to determine the plasma concentrations of triamcinolone acetonide in healthy volunteers, in a pharmacokinetic study with nasal spray formulation.     

热解吸-电晕放电电离-离子迁移谱法现场快速筛查化妆品中5种禁用组分

采用热解吸-电晕放电电离技术结合离子迁移谱，研究建立了化妆品中5种禁用卡因类化合物的现场快速筛查方法。化妆品样品无需前处理步骤，样品轻轻蘸取、滴加或喷雾在采样拭纸上，置于离子源样品槽中，采用热解吸-电晕放电电离技术实现样品中待测物的热解吸和离子化，随后以离子迁移谱进行快速筛查分析。5种卡因类化合物的检出限为10~50 ng，离子迁移谱分析时间小于20 ms，整个样品分析周期不超过1 min。本方法简便、快速、成本低廉，适用于化妆品中卡因类禁用组分的现场快速筛查。     

Characterization and application of a self‐aspirating electrospray source with pneumatic‐assisted ionization

A single gas‐assisted electrospray ion source developed for ambient mass spectrometry is introduced in this paper. Simultaneous self‐aspiration and electrospray could be achieved by using a constant sheath gas flow supplied from a mini air pump. A gas dynamic study of the spray module is carried out for structural optimization. The entire device exhibits a simplified design and has been systematically characterized through both simulated and experimental investigations. According to the results, the ion source exhibited satisfactory stability and the ability for quantitative operation in routine electrospray ionization mass spectrometry. Furthermore, the ion source can be operated as a desorption electrospray ionization source to perform direct desorption/ionization of the solid samples. The versatile source described here appears to provide a practical approach to perform ambient mass spectrometry analysis with unrestricted sampling operation, and the extensive gas dynamic studies together with the experimental characterization are believed to be helpful in building self‐aspirating spray devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Paper spray mass spectrometry and PLS-DA improved by variable selection for the forensic discrimination of beers

Paper spray mass spectrometry (PS-MS) combined with partial least squares discriminant analysis (PLS-DA) was applied for the first time in a forensic context to a fast and effective differentiation of beers. Eight different brands of American standard lager beers produced by four different breweries (141 samples from 55 batches) were studied with the aim at performing a differentiation according to their market prices. The three leader brands in the Brazilian beer market, which have been subject to fraud, were modeled as the higher-price class, while the five brands most used for counterfeiting were modeled as the lower-price class. Parameters affecting the paper spray ionization were examined and optimized. The best MS signal stability and intensity was obtained while using the positive ion mode, with PS(+) mass spectra characterized by intense pairs of signals corresponding to sodium and potassium adducts of malto-oligosaccharides. Discrimination was not apparent neither by using visual inspection nor principal component analysis (PCA). However, supervised classification models provided high rates of sensitivity and specificity. A PLS-DA model using full scan mass spectra were improved by variable selection with ordered predictors selection (OPS), providing 100% of reliability rate and reducing the number of variables from 1701 to 60. This model was interpreted by detecting fifteen variables as the most significant VIP (variable importance in projection) scores, which were therefore considered diagnostic ions for this type of beer counterfeit.