Based on MFe2O4 (M=Co,Cu, and Ni): Magnetically recoverable nanocatalysts in synthesis of heterocyclic structural scaffolds

Abstract

Catalysis research under magnetically recoverable nanocatalysts is a well-known topic in organic synthesis. In recent times, catalysis research has clearly experienced a renaissance in the area of utility of ferrite nanoparticles based on their ability to recovery and reusability. In this review, the focus is on the fabrication, characterization and of application the MFe₂O₄ (M=Co, Cu, and Ni) nanocatalysts in synthesis of heterocyclic structural scaffolds.     

纳米Fe3O4-TiO2靶向光动力疗法对肝癌细胞的杀伤效应

光动力疗法(PDT)作为一种迅速发展的传统替代疗法,在抗癌治疗中显示出巨大的潜力.为增强靶向性和提高光催化杀伤效率,本研究设计了一种新型光敏剂Fe₃O₄-TiO₂磁性纳米粒.在不同外磁场下,考察其在可见光和紫外光激发下对肝癌细胞的杀伤效应.同时利用流式细胞术检测纳米Fe₃O₄-TiO₂对肝癌细胞凋亡率、细胞周期和线粒体膜电位的影响.根据纳米Fe₃O₄-TiO₂和肝癌细胞的作用方式探讨其抗癌机制.结果表明,可见光激发纳米Fe₃O₄-TiO₂可以杀伤癌细胞,且其杀伤效率与紫外光激发下无明显差别.此外,Fe₃O₄-TiO₂比TiO₂具有更高的细胞摄取率,从而使其具有更高的选择性和光催化杀伤效率.其作用机制是光催化纳米Fe₃O₄-TiO₂产生活性氧ROS抑制癌细胞,然后通过阻滞细胞周期G₀/G₁期,降低线粒体膜电位,线粒体去极化,最终诱导细胞凋亡.     

Development of magnetic,ferrite supported palladium catalysts for 2,4-dinitrotoluene hydrogenation

Cobalt, copper, and nickel ferrite spinel nanoparticles have been synthesized by using a combination of sonochemical treatment and combustion. The magnetic nanoparticles have been used as supports to prepare ~4 wt% palladium catalysts. The ferrites were dispersed in an ethanolic solution of Pd(II) nitrate by ultrasonication. The palladium ions were reduced to metallic Pd nanoparticles, which were then attached to the surface of the different metal oxide supports. Thus, three different catalysts (Pd/CoFe₂O₄, Pd/CuFe₂O₄, Pd/NiFe₂O₄) were made and tested in the hydrogenation of 2,4-dinitrotoluene (DNT). A possible reaction mechanism, including the detected species, has been envisaged based on the results. The highest 2,4-diaminotoluene (TDA) yield (99 n/n%) has been achieved by using the Pd/NiFe₂O₄ catalyst. Furthermore, the TDA yield was also reasonable (84.2 n/n%) when the Pd/CoFe₂O₄ catalyst was used. In this case, complete and easy recovery of the catalyst from the reaction medium is ensured, as the ferrite support is fully magnetic. Thus, the catalyst is very well suited for applicationy in the hydrogenation of DNT or other aromatic nitro compounds.     

Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: A novel heat-generating substrate for magnetic hyperthermia application

A facile method of fabricating novel heat-generating membranes composed of electrospun polyurethane (PU) nanofibers decorated with superparamagnetic iron oxide nanoparticles (NPs) is reported. Electrospinning was used to produce polymeric nanofibrous matrix, whereas polyol immersion technique allowed in situ assembly of well-dispersed Fe₃O₄ NPs on the nanofibrous membranes without any surfactant, and without sensitizing and stabilizing reagent. The assembly phenomena can be explained by the hydrogen-bonding interactions between the amide groups in the PU matrix and the hydroxyl groups capped on the surface of the Fe₃O₄ NPs. The prepared nanocomposite fibers showed acceptable magnetization value of 33.12 emu/g, after measuring the magnetic hysteresis loops using SQUID. Moreover, the inductive heating property of electrospun magnetic nanofibrous membranes under an alternating current (AC) magnetic field was investigated. We observed a progressive increase in the heating rate with the increase in the amount of magnetic Fe₃O₄ NPs in/on the membranes. The present electrospun magnetic nanofibrous membrane may be a potential candidate as a novel heat-generating substrate for localized hyperthermia cancer therapy.     

Synthesis of Co/MFe2O4 (M=Fe, Mn) core/shell nanocomposite particles

Monodispersed cobalt nanoparticles (NPs) with controllable size (8–14 nm) have been synthesized using thermal decomposition of dicobaltoctacarbonyl in organic solvent. The as-synthesized high magnetic moment (125 emu/g) Co NPs are dispersible in various organic solvents, and can be easily transferred into aqueous phase by surface modification using phospholipids. However, the modified hydrophilic Co NPs are not stable as they are quickly oxidized, agglomerated in buffer. Co NPs are stabilized by coating the MFe₂O₄ (M=Fe, Mn) ferrite shell. Core/shell structured bimagnetic Co/MFe₂O₄ nanocomposites are prepared with tunable shell thickness (1–5 nm). The Co/MFe₂O₄ nanocomposites retain the high magnetic moment density from the Co core, while gaining chemical and magnetic stability from the ferrite shell. Compared to Co NPs, the nanocomposites show much enhanced stability in buffer solution at elevated temperatures, making them promising for biomedical applications.     

Flash microwave synthesis of trevorite nanoparticles

Nickel ferrite nanoparticles have several possible applications as cathode materials for rechargeable batteries, named “lithium-ion” batteries. In this study, NiFe₂O₄ was prepared by microwave induced thermohydrolysis. The obtained nanoparticles were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), BET method, transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). All the results show that the microwave one-step flash synthesis leads in a very short time to NiFe₂O₄ nanoparticles with elementary particles size close to 4-5 nm, and high specific surfaces (close to 240 m²/g). Thus, microwave heating appears as an efficient source of energy to produce quickly nanoparticles with complex composition as ferrite.     

Preparation of magnetic CoFe2O4-functionalized graphene sheets via a facile hydrothermal method and their adsorption properties

Magnetic CoFe₂O₄-functionalized graphene sheets (CoFe₂O₄-FGS) nanocomposites have been synthesized by hydrothermal treatment of inorganic salts and thermal exfoliated graphene sheets. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that cobalt ferrite nanoparticles with sizes of 10-40 nm are well dispersed on graphene sheets. OH⁻ was recognized as a tie to integrate the inorganic salts with the graphene sheets, which made reaction started and developed on the surface of graphene sheets and formed cobalt ferrite nanoparticles on graphene sheets. The adsorption kinetics investigation revealed that the adsorption of methyl orange from aqueous solution over the as-prepared CoFe₂O₄-FGS nanocomposites followed pseudo-second-order kinetic model and the adsorption capacity was examined as high as 71.54 mg g⁻¹. The combination of the superior adsorption of FGS and the magnetic properties of CoFe₂O₄ nanoparticles can be used as a powerful separation tool to deal with water pollution.     

Mn(III) complex supported on Fe3O4 nanoparticles: magnetically separable nanocatalyst for selective oxidation of thiols to disulfides

A manganese(III) complex, [Mn(phox)₂(CH₃OH)₂]ClO₄ (phox?=?2-(2′-hydroxyphenyl)oxazoline), was immobilized on silica-coated magnetic Fe₃O₄ nanoparticles through the amino propyl linkage using a grafting process in dichloromethane. The resulting Fe₃O₄@SiO₂–NH₂@Mn(III) nanoparticles are used as efficient and recyclable catalysts for selective oxidation of thiols to disulfides using urea-hydrogen peroxide as the oxidant. The nanocatalyst was recycled several times. Leaching and recycling experiments revealed that the nanocatalyst can be recovered, recycled, and reused more than five times, without the loss of catalytic activity and magnetic properties. The recycling of the nanocatalyst in six consecutive runs afforded a total turnover number of more than 10,000. The heterogeneous Fe₃O₄@SiO₂–NH₂@Mn(III) nanoparticle shows more selectivity for the formation of disulfides in comparison with the homogeneous manganese complex.     

铁酸钴纳米粒子:室温下点击合成亚芳基巴比妥酸衍生物的高效可磁性分离多相催化剂(英文)

A coprecipitation method was used to synthesize superparamagnetic CoFe2O4 nanoparticles without using any capping agents/surfactants. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, a vibrating sample magnetometer (VSM), N2 adsorption and thermogravimetric/differential thermal analysis/differential thermal gravimetry techniques. The synthesized spinel CoFe2O4 nanoparticles had an average size of 2-8 nm with a high surface area (140.9 m2/g). The field-dependent magnetization, demonstrated by VSM and saturation magnetization, was found to be 1.77 emu/g. An efficient method was used for the synthesis of arylidene barbituric acid derivatives using CoFe2O4 magnetic nanoparticles as a magnetically separable and reusable catalyst in aqueous ethanol. The attractive features of this synthetic protocol were very short reaction time, high yields, high turnover frequency, simple work-up procedure, economy, a clean reaction methodology, and chemoselectivity, as well as provision of an ecofriendly and green synthesis.     

磁性纳米Pd/Fe3O4催化剂的制备及其在Heck反应中的应用

通过使用聚乙烯吡咯烷酮作为稳定剂,合成了磁性Pd/Fe₃O₄纳米颗粒催化剂。对该催化剂进行粉末X射线衍射、透射电子显微镜、感应耦合等离子体和磁性表征。将Pd/Fe₃O₄催化剂用于Heck反应,检测其催化性能。测试结果表明Pd纳米颗粒负载在Fe₃O₄纳米颗粒上,而且催化剂的尺寸<20 nm,并在Heck反应中表现了极好的催化性能。此外,催化剂可以通过磁场回收利用, 且催化活性没有显著的降低。     

荧光XAFS表征Pt/BaAl2O4-Al2O3催化剂中的微量铂物种

随着稀薄燃烧(lean-burn)发动机的推广使用和环保法规的日趋严格,消除稀燃尾气中的氮氧化物(N O x)已刻不容缓。N O x储存还原技术被认为是最具应用前景的方法之一[1,2]。目前,对Pt/BaA l2O4-A l2O3体系中N O x储存与还原机制的研究较多[1￣4],但对该体系中微量铂物种微观结构及其与性能的关系研究较少,这主要是由于Pt含量(0.1w t%￣0.5wt%)太低,分散度较高,使表征方法受到很大限制。本文采用共沉淀-浸渍法制得具有较高比表面积和热稳定性的N O x储存还原催化剂Pt/BaA l2O4-A l2O3,应用荧光X-射线吸收精细结构方法(Fluores-cence-…     

Fabrication and Characterization of Iron (II,III) on Positively Charged Gold Nanoparticles with Application for Magnetically Recoverable Catalysis

An aqueous dispersion was prepared by attaching positively charged gold nanoparticles to the surface of poly-sodium-p-styrenesulfonate-modified Fe₃O₄ nanoparticles. The Fe₃O₄@positively charged gold nanoparticles offer high monodispersion, stability against aggregation, and high magnetization with uniform size. The Fe₃O₄@positively charged gold nanoparticles were efficient and recyclable catalysts due to the formation of a positively charged gold layer on the surface of Fe₃O₄ nanoparticles and were stable in aqueous solution for over forty-eight hours and hence may have a broad range of applications.     

Y2O3 Nanoparticles and X-ray Radiation-Induced Effects in Melanoma Cells

The innovative strategy of using nanoparticles in radiotherapy has become an exciting topic due to the possibility of simultaneously improving local efficiency of radiation in tumors and real-time monitoring of the delivered doses. Yttrium oxide (Y₂O₃) nanoparticles (NPs) are used in material science to prepare phosphors for various applications including X-ray induced photodynamic therapy and in situ nano-dosimetry, but few available reports only addressed the effect induced in cells by combined exposure to different doses of superficial X-ray radiation and nanoparticles. Herein, we analyzed changes induced in melanoma cells by exposure to different doses of X-ray radiation and various concentrations of Y₂O₃ NPs. By evaluation of cell mitochondrial activity and production of intracellular reactive oxygen species (ROS), we estimated that 2, 4, and 6 Gy X-ray radiation doses are visibly altering the cells by inducing ROS production with increasing the dose while at 6 Gy the mitochondrial activity is also affected. Separately, high-concentrated solutions of 25, 50, and 100 µg/mL Y₂O₃ NPs were also found to affect the cells by inducing ROS production with the increase of concentration. Additionally, the colony-forming units assay evidenced a rather synergic effect of NPs and radiation. By adding the NPs to cells before irradiation, a decrease of the number of proliferating cell colonies was observed with increase of X-ray dose. DNA damage was evidenced by quantifying the γ-H2AX foci for cells treated with Y₂O₃ NPs and exposed to superficial X-ray radiation. Proteomic profile confirmed that a combined effect of 50 µg/mL Y₂O₃ NPs and 6 Gy X-ray dose induced mitochondria alterations and DNA changes in melanoma cells.     

In-tube magnetic solid phase microextraction of some fluoroquinolones based on the use of sodium dodecyl sulfate coated Fe3O4 nanoparticles packed tube

In-tube magnetic solid phase microextraction (in-tube MSPME) of fluoroquinolones from water and urine samples based on the use of sodium dodecyl sulfate (SDS) coated Fe₃O₄ nanoparticles packed tube has been reported. After the preparation of Fe₃O₄ nanoparticles (NPs) by a batch synthesis, these NPs were introduced into a stainless steel tube by a syringe and then a strong magnet was placed around the tube, so that the Fe₃O₄ NPs were remained in the tube and the tube was used in the in-tube SPME-HPLC/UV for the analysis of fluoroquinolones in water and urine samples. Plackett–Burman design was employed for screening the variables significantly affecting the extraction efficiency. Then, the significant factors were more investigated by Box–Behnken design. Calibration curves were linear (R² > 0.990) in the range of 0.1–1000 μg L⁻¹ for ciprofloxacin (CIP) and 0.5–500 μg L⁻¹ for enrofloxacin (ENR) and ofloxacin (OFL), respectively. LODs for all studied fluoroquinolones ranged from 0.01 to 0.05 μg L⁻¹. The main advantages of this method were rapid and easy automation and analysis, short extraction time, high sensitivity, possibility of fully sorbent collection after analysis, wide linear range and no need to organic solvents in extraction.     

磁靶向纳米Fe3O4-TiO2复合物的制备及其对肝癌细胞的光催化杀伤效应

采用三种低温溶胶-凝胶法制备了具有不同Fe₃O₄掺杂量的磁靶向纳米Fe₃O₄-TiO₂复合物, 通过X射线衍射(XRD)、透射电镜(TEM)、傅里叶变换红外(FTIR)光谱、紫外-可见(UV-Vis)光谱、荧光光谱(FS)及磁性能分析等表征方法筛选出包覆均匀、分散性好、磁性能优异及光催化活性较高的纳米Fe₃O₄-TiO₂复合物. 以四甲基偶氮唑蓝(MTT)法检测肝癌细胞(HepG2)的存活率, 考察纳米Fe₃O₄-TiO₂复合物在外磁场作用下对HepG2 细胞的光催化杀伤效应. 结果表明: 采用方法三制备的5%(质量分数)Fe₃O₄-TiO₂复合物具备核-壳结构, 在混悬液中分散性较好, 平均粒径约为50 nm, 具有较强的光催化活性和良好的磁响应性, 同时将纳米TiO₂的光响应范围拓宽至444 nm; 在外磁场作用下, 紫外光和可见光激发纳米Fe₃O₄-TiO₂复合物对HepG2细胞的杀伤效应差异不大, 且均强于纳米TiO₂; 其杀伤效应在0-1.0 T范围内随着外磁场强度的增大而增强.     

Fe3O4 Nanoparticles as an Efficient and Magnetically Recoverable Catalyst for Friedel–Crafts Acylation Reaction in Solvent-Free Conditions

Application of Fe₃O₄ nanoparticles (NPs) as a robust, very efficient, and magnetically recoverable catalyst was investigated in Friedel–Crafts acylation (FCA) of ferrocene and aromatic compounds. This reaction was performed with acid chlorides in solvent-free conditions at room temperature. The catalyst was easily separated by an external magnetic field from the reaction mixture. The separated catalyst was recycled for several consecutive runs without appreciable loss of its catalytic activity.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Preparation and characterization of CoFe2O4/TiO2 magnetic composite films

CoFe₂O₄/TiO₂ magnetic composite films were prepared using the sol-gel method with tetrabutyltitanate and metallic chlorates as starting materials. The effects of heat treatment temperatures on microstructures and on magnetic properties were studied. The microstructure and properties of the samples at different heat treatment temperatures were characterized by X-ray diffraction, Raman spectrum, scanning electron microscopy, polarized microscopy and vibrating sample magnetometry. The results show that crystals of different substances grow up independently. Cobalt ferrite is evenly embedded into the titanium dioxide matrix in the prepared composite films. The magnetism of the composite films is enhanced with an increase of the heat temperature. Supported by the National Natural Science Foundation of China (Grant Nos. 50632030 and 10474077), and the Natural Science Foundation of Shaanxi Province (Grant No. 2006E135)     

Fabrication, characterization and magnetic behaviour of alumina-doped zinc ferrite nano-particles

Zinc ferrite nano-powders with a nominal composition of ZnFe₂O₄ were prepared by combustion synthesis using mixture of urea and ammonium nitrate as fuel. The influence of alumina-doping on the structural, morphological and magnetic properties of ZnFe₂O₄ nano-particles was investigated by means of X-ray powder diffraction (XRD), infrared (IR) spectroscopy, scanning and transmission electron microscopy (SEM and TEM) and vibrating sample magnetometer (VSM). XRD and IR analyses confirm the cubic spinel phase of ZnFe₂O₄ nano-particles. The Zn ferrite presented a uniform microstructure with grain size in nano-scale. Alumina-doping brought about a change in the morphology of the as prepared ferrite from sphere-like to regular hexagon. Al₂O₃-treatment led to a decrease in the coercivity (H_c), magnetization (M_s) and magnetic moment (n_B) of the investigated system. The maximum decrease in the values of H_c, M_s and n_B due to the treatment with 1.5 wt% Al₂O₃ attained 13.5, 17.4 and 13.5%, respectively. The observed results can be explained on the basis of particle size and the Fe³⁺ concentration in the octahedral and tetrahedral sites involved in the cubic spinel structure.     

Reprint of: Extraction of fluoxetine from aquatic and urine samples using sodium dodecyl sulfate-coated iron oxide magnetic nanoparticles followed by spectrofluorimetric determination

A new method based on the combination of magnetic solid phase extraction (MSPE) and spectrofluorimetric determination was developed for isolation and preconcentration of fluoxetine form aquatic and biological samples using sodium dodecyl sulfate (SDS) coated Fe₃O₄ nanoparticles (NPs) as a sorbent. The unique properties of Fe₃O₄ NPs including high surface area and strong magnetism were utilized effectively in the MSPE process. Effect of different parameters influencing the extraction efficiency of fluoxetine including the amount of Fe₃O₄ and SDS, pH value, sample volume, extraction time, desorption solvent and time were optimized. Under optimized condition, the method was successfully applied to the extraction of fluoxetine from water and urine samples and absolute recovery amount of 85%, detection limit of 20 μg L⁻¹ and a relative standard deviation (RSD) of 1.4% were obtained. The method linear response was over a range of 50–1000 μg L⁻¹ with R² = 0.9968. The relative recovery in different aquatic and urine matrices were investigated and values of 80% to 104% were obtained. The whole procedure showed to be conveniently fast, efficient and economical for extraction of fluoxetine from environmental and biological samples.     

Mixed hemimicelles solid-phase extraction of chlorophenols in environmental water samples with 1-hexadecyl-3-methylimidazolium bromide-coated Fe3O4 magnetic nanoparticles with high-performance liquid chromatographic analysis

In this paper, 1-hexadecyl-3-methylimidazolium bromide (C₁₆mimBr)-coated Fe₃O₄ magnetic nanoparticles (NPs) as an adsorbent of mixed hemimicelles solid-phase extraction was investigated for the preconcentration of two chlorophenols (CPs) in environmental water samples prior to HPLC with UV detection at 285 nm. The high surface area and excellent adsorption capacity of the Fe₃O₄ NPs after modification with C₁₆mimBr were utilized adequately in the SPE process. By the rapid isolation of Fe₃O₄ NPs through placing a strong magnet on the bottom of beaker, the time-consuming preconcentration process of loading large volume sample in conventional SPE method with a column can be avoided. A comprehensive study of the adsorption conditions such as the zeta-potential of Fe₃O₄ NPs, added amounts of C₁₆mimBr, pH value, standing time and maximal extraction volume were also presented. Under optimized conditions, two analytes of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) were quantitatively determined. The method was then used to determine the two CPs in real environmental water samples. The accuracy of method was evaluated by recovery measurements on spiked samples. Good recovery results (74–90%) were achieved. It is important to note that satisfactory preconcentration factors and extraction recoveries for the two CPs were obtained with only a small amount of Fe₃O₄ NPs (40 mg) and C₁₆mimBr (24 mg).