Picolinimidoamide-Cu(II) complex anchored on Fe3O4@SiO2 core–shell magnetic nanoparticles: an efficient reusable catalyst for click reaction

A Cu(II) complex supported on Fe₃O₄@SiO₂ core–shell magnetic nanoparticles (MNPs) was prepared and characterized by FT-IR, XRD, SEM, EDX, TEM, VSM, TGA, and AAS analysis. The load of Cu on picolinimidoamide ligand anchored on Fe₃O₄@SiO₂ core–shell MNPs was determined as 1.22, 1.54, and 1.70 wt% using AAS, EDX and TGA analyses, respectively. Synthesized Cu(II) complex on Fe₃O₄@SiO₂ MNPs efficiently catalyzed a click reaction between alkyl halides, alkynes, and sodium azide to synthesize corresponding triazoles in high to excellent yields. The catalyst was recovered using an external magnetic field, and recycled for subsequent reactions without substantial loss of efficiency.     

Fe3O4@SiO2–NH2 core-shell nanocomposite as an efficient and green catalyst for the multi-component synthesis of highly substituted chromeno[2,3-b]pyridines in aqueous ethanol media

ABSTRACT

An efficient and green approach for synthesizing chromeno[2,3-b]pyridine derivatives through one-pot three-component reactions of salicylaldehydes, thiols, and malononitrile has been developed by Fe₃O₄@SiO₂–NH₂ nanocatalyst in aqueous ethanol media under re?ux conditions. The present procedure provides several advantages such as environmentally benign, straightforward, excellent yields, short reaction times, cost-effective, good recyclability, little catalyst loading, and facile catalyst separation for the preparation of chromeno[2,3-b]pyridines as important privileged medicinal scaffold. In addition, aminopropyl-coated Fe₃O₄@SiO₂ nanoparticles were fully characterized by scanning electron microscopy, X-ray diffraction, energy dispersive analysis of X-ray, vibrating sample magnetometer, and FT-IR analysis.     

Fe3O4@SiO2@polymer复合粒子的制备及在药物控制释放中的应用

本文通过多步反应制备了一种新型的、多层结构的、多功能的磁性纳米复合粒子, (Fe₃O₄@SiO₂@polymer). 纳米复合粒子内核是磁性Fe₃O₄纳米粒子, SiO₂包裹在Fe₃O₄上能够使其稳定分散和保护其不被腐蚀氧化; 中间层是生物相容的聚天冬氨酸(PAsp)载药层; 最外层是亲水的聚乙二醇(PEG)稳定层. 磁性纳米复合粒子各层都是生物相容的, 利用静电作用将抗癌药物阿霉素(DOX)负载在磁性纳米复合粒子中, 通过PAsp的pH响应调节了DOX的释放速率.     

Synthesis,characterization and application of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles

In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe₃O₄@SiO₂@SO₃H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), coating of silica on Fe₃O₄ MNPs (Fe₃O₄@SiO₂) and incorporation of sulfonic acid as a functional group on the surface of Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂@SO₃H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd.     

Fe3O4 MNPs-DETA/Benzyl-Br3: A new magnetically reusable catalyst for the oxidative coupling of thiols

We report a new strategy to immobilize a bromine source on the surface of magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs-DETA/Benzyl-Br₃) leading to a magnetically recoverable catalyst, which exhibits high catalytic efficiency in oxidative coupling of thiols to the disulfides (89–98%). The Fe₃O₄ MNPs-DETA/Benzyl-Br₃ catalyst was fabricated by anchoring 3-chloropropyltrimethoxysilane (CPTMS) on magnetic Fe₃O₄ nanoparticles, followed with N-benzylation and reaction with bromine in tetrachloridecarbon. The resulting nanocomposite was analyzed by a series of characterization techniques such as FT-IR, SEM, TGA, VSM and XRD. The catalyst could be recovered via magnetic attraction and could be recycled at least 5 times without appreciable decrease in activity.     

可回收Fe3O4@SiO2-Ag磁性纳米微球对染料污染物的快速脱色处理

介绍了一种采用无毒廉价的前驱物制备Fe₃O₄@SiO₂-Ag磁性纳米微球的快捷方法,制备的Fe₃O₄@SiO₂-Ag纳米微球在NaBH₄存在下可以催化还原染料污染物.实验结果表明,Fe₃O₄@SiO₂-Ag磁性纳米粒子保持了Ag纳米粒子和Fe₃O₄纳米粒子的双重优点,不仅对染料罗丹明B和曙红Y具有良好的催化还原效率,而且可以在外加磁场作用下从溶液中快速有效的分离.催化还原反应速率与反应温度及Fe₃O₄@SiO₂-Ag催化剂用量有关,反应体系中表面活性剂和无机盐(Na₂SO₄)的存在也会影响催化剂的催化活性.该Fe₃O₄@SiO₂-Ag磁性纳米粒子在工业染料污染物处理方面具有应用前景.     

Olefins oxidation with molecular O2 in the presence of chiral Mn (III) salen complex supported on magnetic CoFe2O4@SiO2@CPTMS

In the present study, CoFe₂O₄@SiO₂@CPTMS nanocomposite was synthesized and the homogeneous chiral Mn‐salen complex was anchored covalently onto the surface of CoFe₂O₄@SiO₂@CPTMS nanocomposite. The heterogeneous Mn‐salen magnetic nanocatalyst (CoFe₂O₄@SiO₂@CPTMS@ chiral Mn (III) Complex) was characterized by different techniques including transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). Then, the aerobic enantioselective oxidation of olefins to the corresponding epoxide was investigated in the presence of magnetic chiral CoFe₂O₄@SiO₂@Mn (III) complex at ambient conditions within 90 min. The results showed the corresponding products were synthesized with excellent yields and selectivity. In addition, the heterogeneous CoFe₂O₄@SiO₂@ CPTMS@ chiral Mn (III) complex has benefits such as high selectivity and comparable catalytic reactivity with its homogeneous analog as well as mild reaction condition, facile recovery, and recycling of the heterogeneous catalyst.     

Latent Fingerprints Enhancement Using a Functional Composite of Fe3O4@SiO2-Au

A functional composite of Fe₃O₄@SiO₂-Au was prepared and used for latent fingerprint detection. Material characterization results confirmed the successful fabrication of the Fe₃O₄@SiO₂-Au composite. In latent fingerprint detection, the Fe₃O₄@SiO₂-Au composite provides a better performance than commercial copper powder and also gold nanoparticles. More importantly, the Fe₃O₄@SiO₂-Au composite can be used in both powder and suspension forms, and also for common surfaces including glass, polyethylene bags, and paper. The favorable pH range (2.0–5.0) for the compositein finger marks detection is much wider than that of the traditional multi-metal deposition method (pH ranging from 2.0 to 3.0). The mechanism for the Fe₃O₄@SiO₂-Au composite in fingerprint detection was explored and discussed. This study provides a favorable choice for a one-step deposition method for latent fingerprint detection.     

Nanoparticle supported,magnetically separable vanadium complex as catalyst for selective oxidation of sulfides

A magnetically recyclable vanadium(V) catalyst was synthesized by covalent anchoring of VO(salen)Cl on silica-coated Fe₃O₄ nanoparticles. This straightforward preparation yields magnetically separable Fe₃O₄@SiO₂@VO(salen) nanoparticles with high vanadium loading. These nanoparticles were efficient catalysts for selective oxidation of sulfides to corresponding sulfoxides with urea hydrogen peroxide in excellent yields. Leaching and recycling experiments revealed that the nanocatalyst can be applied for nearly complete oxidation of sulfides for at least five successive cycles.     

An efficient ‘on-water’ synthesis of 1,4-dihydropyridines using Fe3O4@SiO2 nanoparticles as a reusable catalyst

An ‘on-water’, efficient, high yielding, expeditious method has been developed for the synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives via an one-pot multi-component condensation of dimedone or 4-hydroxycoumarine, aldehydes, and ammonium acetate using Fe₃O₄@SiO₂ nanoparticles as a recyclable heterogeneous catalyst. This method takes advantage of the fact that water, a green solvent is used in combination with Fe₃O₄@SiO₂ nanoparticles as catalyst which can be easily recovered magnetically and reused for further runs.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Sulfonated magnetic nanocatalyst and application for synthesis of novel Spiro[acridine-9,5′-thiazole]-1,4′-dione derivatives

Sulfonated Sulfurol supported Fe₃O₄ (Fe₃O₄@SiO₂-Pr-Sulfurol-SO₃H) a new magnetic reusable nanocatalyst was prepared using chemical modification of magnetic nanoparticles (MNPs) surface with Sulfurol-SO₃H. The Sulfurol-SO₃H moieties on the surface of MNPs act as acidic catalytic sites for catalysis purposes. Fe₃O₄@SiO₂-Pr-Sulfurol-SO₃H was authenticated by usual analytical and spectroscopic techniques. The prepared Fe₃O₄@SiO₂-Pr-Sulfurol-SO₃H MNPs were applied to the preparation of novel Spiro[acridine-9,5′-thiazole]-1,4′-dione derivatives via the three-component condensation of isatins, dimedone and thioamides or thioureas.

     

Synthesis and characterization of Fe3O4@SiO2–polymer-imid–Pd magnetic porous nanospheres and their application as a novel recyclable catalyst for Sonogashira–Hagihara coupling reactions

We demonstrate herein the modification of magnetic nanoparticles and their use as a magnetic nanocatalyst in direct coupling reactions of aryl halides with terminal alkynes. Magnetite particles were prepared by simple co-precipitation method in aqueous medium, and then Fe₃O₄@ SiO₂ nanosphere was synthesized by using nano-Fe₃O₄ as the core, TEOS as the silica source and PVA as the surfactant. Fe₃O₄@SiO₂ was coated with polymeric N-heterocyclic carbene/Pd. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometer and N₂ adsorption–desorption isotherm analysis. Poly (N-vinyl imidazole) functionalized Fe₃O₄@SiO₂ nanoparticle was found to be an efficient nanocatalyst in Sonogashira–Hagihara cross-coupling reactions. The nanocatalyst can be easily recovered by a magnetic field and reused for six runs without appreciable loss of its catalytic activity.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

Fe3O4@SiO2@l‐arginine@Pd(0): a new magnetically retrievable heterogeneous nanocatalyst with high efficiency for C–C bond formation

The surface of Fe₃O₄@SiO₂ nanoparticles was modified using l ‐arginine as a green and available amino acid to trap palladium nanoparticles through a strong interaction between the metal nanoparticles and functional groups of the amino acid. The proposed green synthetic method takes advantage of nontoxic reagents through a simple procedure. Characterization of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) was done using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analysis. The catalytic activity of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) as a new nanocatalyst was investigated in C – C coupling reactions. Waste‐free, use of green medium, efficient synthesis leading to high yield of products, eco‐friendly and economic catalyst, excellent reusability of the nanocatalyst and short reaction time are the main advantages of the method presented. Copyright © 2016 John Wiley & Sons, Ltd.     

聚乙烯基胺包裹Fe3O4@SiO2磁性微球用于Knoevenagel缩合（英文）简

Polyvinyl amine coated Fe₃O₄@SiO₂ composite microspheres with a core-shell structure were prepared and employed as a magnetic catalyst for Knoevenagel condensation under mild conditions. The catalyst can be readily recovered using a magnet and reused several times without loss in activity or selectivity. The performance of the magnetic base catalyst was compared with that of polyvinyl amine functionalized mesoporous SBA-15, which showed that the magnetic nanoparticles gave improved reaction rate and yield.     

ZnFe2O4 nanoparticles: A green and recyclable magnetic catalyst for fast and regioselective conversion of epoxides to vicinal hydroxythiocyanates using NH4SCN under solvent-free conditions

ZnFe₂O₄ nanoparticles were synthesized and used as recyclable magnetic catalyst in the solvent-free conversion of different epoxides to vicinal hydroxythiocyanates with NH₄SCN at room temperature. The reactions were carried out by grinding in a mortar with perfect regioselectivity within short times (2-25 min) and with high to excellent yields (75–95%). The nanocatalyst was separated easily using an external magnet and reused for four consecutive cycles without any noticeable loss of efficiency or magnetic property.     

Hiyama cross‐coupling reaction using Pd(II) nanocatalyst immobilized on the surface of Fe3O4@SiO2

We report a simple process for the synthesis of Fe₃O₄@SiO₂/APTMS (APTMS = 3‐aminopropyltrimethoxysilane) core–shell nanocatalyst support. The new nanocatalyst was prepared by stabilization of Pd(cdha)₂ (cdha = bis(2‐chloro‐3,4‐dihydroxyacetophenone)) on the surface of the Fe₃O₄@SiO₂/APTMS support. The structure and composition of this catalyst were characterized using various techniques. An efficient method was developed for the synthesis of a wide variety of biaryl compounds via fluoride‐free Hiyama cross‐coupling reactions of aryl halides with arylsiloxane, with Fe₃O₄@SiO₂/APTMS/Pd(cdha)₂ as the catalyst under reaction conditions. This methodology can be performed at 100°C through a simple one‐pot operation using in situ generated palladium nanoparticles. High catalytic activity, quick separation of catalyst from products using an external magnetic field and use of water as green solvent are attributes of this protocol.     

ZnCl2 supported on Fe3O4@SiO2 core–shell nanocatalyst for the synthesis of quinolines via Friedländer synthesis under solvent‐free condition

A magnetic nanocatalyst of Fe₃O₄@SiO₂/ZnCl₂ was prepared by supporting ZnCl₂ on silica‐coated magnetic nanoparticles of Fe₃O₄. This recoverable catalyst was used for the synthesis of quinolines via Friedländer synthesis from 2‐aminoaryl ketones and α‐methylene ketones under solvent‐free condition. The prepared catalyst was characterized by FT‐IR, TEM, SEM, XRD, EDX, ICP‐OES, VSM and BET. It was found that Fe₃O₄@SiO₂/ZnCl₂ showed higher catalytic activity than homogenous ZnCl₂, and could be reused several times without significant loss of activity.     

Preparation of a trihydrazinotriazine-functionalized core-shell nanocatalyst as an extremely efficient catalyst for the synthesis of benzoxanthenes

In recent years, there is a high demand on utilizing heterogeneous nanocatalysts in organic synthetic routes because of their green approach, facile purification of the products, and reusability of the catalyst. Herein, we introduced trihydrazinotriazine (THDT)-coated Fe₃O₄@SiO₂ as a novel amino-functionalized magnetic nanocompostie. We fully characterized the nanocatalyst and proved the morphology and magnetic property of the nanoparticles by using essential analyses. The basic attribute of the amino-rich porous surface of the nanocomposite provides a desirable environment for enhancing various reaction conditions. To examine the applicability of the nanocatalyst in organic reactions, we synthesized several benzoxanthenes using Fe₃O₄@SiO₂-THDT nanocatalysts. The nanocomposite successfully improved the reaction conditions and provided the benzoxanthenes in an environmentally friendly procedure, which afforded product in excellent yields (80–96%) and reduced time. The nanomagnetic catalyst was easily recovered after each trial by using an external magnet. After six successive runs, the loss of catalytic activity of the nanocomposite was negligible. Finally, we propounded a plausible mechanism for the preparation of the benzoxanthenes derivatives using the THDT-functionalized core-shell magnetic nanocatalyst.