Trapping and cooling a mirror to its quantum mechanical ground state

We propose a technique aimed at cooling a harmonically oscillating mirror to its quantum mechanical ground state starting from room temperature. Our method, which involves the two-sided irradiation of the vibrating mirror inside an optical cavity, combines several advantages over the two-mirror arrangements being used currently. For comparable parameters the three-mirror configuration provides a stiffer trap for the oscillating mirror. Furthermore, it prevents bistability from limiting the use of higher laser powers for mirror trapping, and also partially does so for mirror cooling. Lastly, it improves the isolation of the mirror from classical noise so that the quantum mechanical dynamics of the mirror become easier to observe. These improvements are expected to bring the task of achieving and detecting ground state occupation for the mirror closer to completion.     

Using a Laguerre-Gaussian beam to trap and cool the rotational motion of a mirror

We show theoretically that it is possible to trap and cool the rotational motion of a macroscopic mirror made of a perfectly reflecting spiral phase element using orbital angular momentum transfer from a Laguerre-Gaussian optical field. This technique offers a promising route to the placement of the rotor in its quantum mechanical ground state in the presence of thermal noise. It also opens up the possibility of simultaneously cooling a vibrational mode of the same mirror. Lastly, the proposed design may serve as a sensitive torsional balance in the quantum regime.     

Thermally activated state transition technique for femto-Newton-level force measurement

We develop and test a thermally activated state transition technique for ultraweak force measurement. As a force sensor, the technique was demonstrated on a classical Brownian bead immersed in water and restrained by a bistable optical trap. A femto-Newton-level flow force imposed on this sensor was measured by monitoring changes in the transition rates of the bead hopping between two energy states. The treatment of thermal disturbances as a requirement instead of a limiting factor is the major feature of the technique, and provides a new strategy by which to measure other ultraweak forces beyond the thermal noise limit.     

飞秒光镊技术及其发展

激光捕获技术是利用光辐射力来捕捉、移动和操纵微粒的先进技术。飞秒光镊在实现粒子微纳操纵的同时还伴随着非线性现象的发生。阐述了飞秒光镊的模型和原理以及系统的各种结构形式,包括单光束梯度力光阱、贝塞耳光阱、双光束光纤光阱和冲击波光阱几种形式,并分析了每种形式的特点。     

Weak-force sensing with squeezed optomechanics

We investigate quantum-squeezing-enhanced weak-force sensing via a nonlinear optomechanical resonator containing a movable mechanical mirror and an optical parametric amplifier(OPA). Herein, we determined that tuning the OPA parameters can considerably suppress quantum noise and substantially enhance force sensitivity, enabling the device to extensively surpass the standard quantum limit. This indicates that under realistic experimental conditions, we can achieve ultrahigh-precision quantum force sensing by harnessing nonlinear optomechanical devices.     

激光捕获技术及其发展

激光捕获技术是利用光辐射力来捕捉、移动和操纵微粒的先进技术。光镊即单光束梯度力光阱是通过在高度会聚的激光束束腰附近所产生的极高的场强梯度来形成皮牛顿量级的力,可以三维地捕获和操纵微小粒子。阐述了激光捕获技术的模型和原理以及系统的基本结构;追踪了激光捕获技术的最新研究进展;介绍了非高斯型光阱、光纤光阱和全息光镊等几种特殊形式,并分析了每种形式的特点。展望了激光捕获技术的发展前景。     

Tunable gradient force of hyperbolic-cosine–Gaussian beam with vortices

Gradient force plays an important role in optical tweezers technique. In this paper, the tunable gradient force in focal plane of the hyperbolic-cosine–Gaussian (ChG) beam is investigated numerically. The ChG beam contains one spiral vortex and one non-spiral vortex. Simulation results show that the gradient force distribution can be altered considerably by decentered parameters of ChG beam, topological number of the spiral vortex, and vortex parameter of the non-spiral vortex. Many novel gradient force patterns can occur, which means corresponding optical traps may come into being, including ring optical trap, multiple-point trap pattern, line optical trap, rectangle trap pattern, and rhombus trap pattern. In addition, force pattern evolution principle may also differ significantly.     

Suppression of noise in a noisy optical trap

We have experimentally explored and clarified the concept of noise suppression in intrinsically noisy systems by adding noise at the input using a microscopic bead held in a moving and intensity-modulated optical trap. By coupling the stiffness of the optical trap to its position, we have explicitly constructed an experimental model system in which added fluctuations in the trap position result in reduced variance of the observed bead position as compared to a stationary trap. This reduction in variance and the spectral properties of the observed output noise agree with theoretical predictions. Our experiment demonstrates that the essential aspect of noise reduction in such a system is that the added fluctuations drive the system into states with a reduced intensity of intrinsic noise sufficiently often.     

Measuring the complete force field of an optical trap

The use of optical traps to measure or apply forces on the molecular level requires a precise knowledge of the trapping force field. Close to the trap center, this field is typically approximated as linear in the displacement of the trapped microsphere. However, applications demanding high forces at low laser intensities can probe the light-microsphere interaction beyond the linear regime. Here, we measured the full nonlinear force and displacement response of an optical trap in two dimensions using a dual-beam optical trap setup with back-focal-plane photodetection. We observed a substantial stiffening of the trap beyond the linear regime that depends on microsphere size, in agreement with Mie theory calculations. Surprisingly, we found that the linear detection range for forces exceeds the one for displacement by far. Our approach allows for a complete calibration of an optical trap.     

Noise-activated escape from a sloshing potential well

We treat the noise-activated escape from a one-dimensional potential well of an overdamped particle, to which a periodic force of fixed frequency is applied. Near the well top, the relevant length scales and the boundary layer structure are determined. We show how behavior near the well top generalizes the behavior determined by Kramers, in the case without forcing. Our analysis includes the case when the forcing does not die away in the weak-noise limit. We discuss the relevance of scaling regimes, defined by the relative strengths of the forcing and the noise, to recent optical trap experiments.     

New calibration method for position detector for simultaneous measurements of force constants and local viscosity in optical tweezers

We present a new method to calibrate a quadrant photodiode used as position detector to monitor latex beads trapped in optical tweezers. The method combines the dragging Stoke’s force with the thermal noise analysis (power spectral density (PSD)) of the Brownian motion of the trapped bead. Position detector calibrations used in other similar methods normally utilise a bead attached to the coverslip: the voltage-position calibration factor is found by translating the bead across the waist of a laser beam. The so determined calibration factor is then assumed to be the same when beads are investigated in the optical trap. This procedure presents some drawbacks since attached beads can be affected by proximity effects due to the coverslip glass surface which alter the position sensor response itself. On the contrary, our method is able to provide, simultaneously, the calibration factor, the trap stiffness, and the local viscosity of the medium making use of a single trapped bead.     

Focal plane wave-front sensing algorithm for high-contrast imaging

High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging. Supported by the National Natural Science Foundation of China (Grant No. 10873024)     

Inertial effects of a small Brownian particle cause a colored power spectral density of thermal noise

The random thermal force acting on Brownian particles is often approximated in Langevin models by a "white-noise" process. However, fluid entrainment results in a frequency dependence of this thermal force giving it a "color." While theoretically well understood, direct experimental evidence for this colored nature of the noise term and how it is influenced by a nearby wall is lacking. Here, we directly measured the color of the thermal noise intensity by tracking a particle strongly confined in an ultrastable optical trap. All our measurements are in quantitative agreement with the theoretical predictions. Since Brownian motion is important for microscopic, in particular, biological systems, the colored nature of the noise and its distance dependence to nearby objects need to be accounted for and may even be utilized for advanced sensor applications.     

Optical trapping microfabrication with electrophoretically delivered particles inside glass capillaries

We have developed a new technique for rapid microfabrication that uses electrophoretically delivered particles and an optical trap. The material particles, micrometer- and nanometer-sized polystyrene beads in aqueous solution, are continuously delivered to an optical trap by means of the electrophoretic effect inside glass capillaries or similar microstructures. The optical trap is used to manipulate and deposit the polystyrene beads onto a substrate. The continuous, on-demand delivery of particles allows for microfabrication in two and three dimensions with high speed and high efficiency and without material waste. This new technique has many potential applications in microelectronics and biotechnology.     

High-sensitivity optical monitoring of a micromechanical resonator with a quantum-limited optomechanical sensor

We experimentally demonstrate the high-sensitivity optical monitoring of a micromechanical resonator and its cooling by active control. Coating a low-loss mirror upon the resonator, we have built an optomechanical sensor based on a very high-finesse cavity (30 000). We have measured the thermal noise of the resonator with a quantum-limited sensitivity at the 10(-19) m/sqrt[Hz] level, and cooled the resonator down to 5 K by a cold-damping technique. Applications of our setup range from quantum optics experiments to the experimental demonstration of the quantum ground state of a macroscopic mechanical resonator.     

Optimum splitting ratio for amplifier noise reduction by an asymmetric nonlinear optical loop mirror

We theoretically and experimentally analyze the influence of the splitting ratio and the input power on the noise reduction capability of an asymmetric nonlinear optical loop mirror (NOLM) for different input noise levels. An easy method to calculate the optimum parameters for noise reduction is also presented. The best noise reduction is found at NOLM input powers at which the nonlinear transfer function has a slope close to zero. Additionally, the splitting ratio of the NOLM has to be adapted to its input noise level to suppress amplitude fluctuations effectively. Since the noise reduction by the NOLM is due to the Kerr nonlinearity, which has a timescale below a few femtoseconds, the noise reduction is applicable to short pulses in the picosecond and femtosecond range. This makes the NOLM applicable as an optical regenerator in an optical data transmission system at high bit rates, such as 160 GBit/s.     

高速OCDM系统中的全光阈值技术分析

分析了高速OCDM系统中基于非线性光学环境(NOLM)和非线性放大(NALM)环境的全光阈值技术。考虑了NOLM环境输入脉冲峰值功率对其阈值判决功能的影响,数值模拟了由高非线性光纤构成的NOLM和NALM环境的脉冲整形和旁瓣抑制功能,并和实验结果进行了比较。结果表明基于NOLM和NALM环境的全光阈值技术都能有效地抑制40 Gbit/s的OCDM系统中的干扰噪声,最优的NOLM环境的脉冲峰值输入功率为2 W,而NALM环境只需要mW量级的脉冲峰值输入功率即能够更好地抑制干扰噪声。     

Chiral lateral optical force near plasmonic ring induced by Laguerre-Gaussian beam

Owing to the good adjustability and the strong near-field enhancement, surface plasmons are widely used in optical force trap, thus the optical force trap can achieve excellent performance. Here, we use the Laguerre-Gaussian beam and a plasmonic gold ring to separate enantiomers by the chiral optical force. Along with the radial optical force that traps the particles, there is also a chirality-sign-sensitive lateral force arising from the optical spin angular momentum, which is caused by the interaction between optical orbit angular momentum and gold ring structure. By selecting a specific incident wavelength, the strong angular scattering and non-chiral related azimuthal optical force can be suppressed. Thus the chiral related azimuthal optical force can induce an opposite orbital rotation of the trapped particles with chirality of different sign near the gold ring. This work proposes an effective approach for catchingand separating chiral enantiomers.     

小型化可调光镊设计

光镊利用强会聚激光对微粒产生的梯度力来捕获微粒,可以进行无损、远程操控,同时具有皮牛精度的测力特性,已经成为物理学、生命科学和胶体化学等研究领域中不可缺少的研究工具。光镊效应可以表现微小的光子动量和角动量,是物理学的重要教学工具。本文根据高斯光束传播和变换规律,设计具有稳定捕获性能的最小化光镊,并给出了典型参数。光镊系统由捕获激光、光束耦合系统、倒置生物显微镜和大数值孔径物镜组成,成像系统由物镜、摄影目镜和CCD相机组成。本光镊系统具有紧凑特性,同时通过保持物镜后瞳充满度来实现稳定捕获。在该最小光镊系统上,可以根据用户需求增加光镊阱位操控系统、刚度调节系统和其他辅助设备以满足不同操控要求,可以很好地满足科研和教学需求。