FeOx上AsH3吸附净化的密度泛函研究

基于密度泛函理论研究了AsH₃和O₂分子在α-Fe₂O₃(001)表面和FeO(100)表面的吸附及共吸附性质.结果表明：AsH₃和O₂分子在α-Fe₂O₃(001)表面最稳定的吸附构型都是Hollow吸附位点. AsH₃分子在FeO(100)表面最稳定的吸附位点为Top O吸附位点. O₂分子在FeO(100)表面最稳定的吸附位点为Hollow吸附位点. O₂分子在α-Fe₂O₃(001)和FeO(100)表面吸附后均被活化从而促进AsH₃分子的催化氧化. AsH₃分子在α-Fe₂O₃(001)表面最小的吸附能为-0.7991 eV,在FeO(100)表面最小的吸附能为-0.9117 eV.吸附值数据表明AsH     

Fe3O4磁性纳米颗粒的催化性能研究进展

综述了国内外这一领域科研工作者的研究成果,以紫外光谱（UV）和电化学传感器为主要手段阐述了Fe₃O₄MNPs对H₂O₂的催化作用并对Fe₃O₄MNPs利用其催化性质在H₂O₂的检测领域的进一步发展和应用进行了展望。     

杭锦2#土的光谱特征及非均相Fenton反应机理

杭锦2#土是内蒙古鄂尔多斯杭锦旗地区发现的层状含铁天然矿物,利用Ｘ射线衍射、吡啶吸附红外光谱及Ｘ射线光电子能谱技术对样品的性质进行了表征。X射线光电子能谱表明杭锦2#土骨架结构中Si和Al原子结合能与标准硅氧四面体和铝氧八面体中Si和Al结合能相比明显增加,表面存在Lewis酸位和Brönsted酸位,且杭锦2#土中铁物种以Fe(Ⅲ)和Fe(Ⅱ)形式存在于骨架结构中;非均相Fenton反应中杭锦2#土的Fe(Ⅱ)可与H₂O₂反应生成自由基(·OH)与Fe(Ⅲ),但反应速率慢且难以循环。酸活化后杭锦2#土中Si和Al的结合能进一步增加,铁物种部分转变为非结构铁并以Fe3+与Fe2+转移到样品表面;X射线光电子能谱、吡啶红外和氨气程序升温表征表明酸活化杭锦2#土表面Lewis酸位和Brönsted酸位增多;非均相Fenton反应中,酸活化杭锦2#土表面Fe3+与Fe2+可与H₂O₂循环反应,不断生成·OH并对甲基橙进行降解,且活化杭锦2#土表面Brönsted酸能够提供质子将H₂O₂包围,抑制其分解生成HO-₂并提供更多的·OH,Lewis酸能增加杭锦2#土表面吸附氧（O_ad）含量,而Fe2+可被O_ad氧化为Fe3+,促进Fe2+/Fe3+之间的循环,同时在氧化过程中电子转移到O_ad形成O·-₂,O·-₂能够与Brönsted酸提供的质子反应形成·OH,·OH与O·-₂均为氧化性自由基,能够提升活化杭锦2#土非均相Fenton反应活性。此外,X射线衍射表明酸活化使杭锦2#土中CO2-₃转化为对Fenton反应负面影响更小的SO2-₄进而提升其非均相Fenton反应活性。     

多孔SiO2包裹磁性纳米颗粒Fe3O4的制备与表征

采用加热分解油酸铁法制备了Fe₃O₄磁性纳米颗粒,并用有机模板和反相微乳液相结合的方法将磁性纳米颗粒包裹在多孔二氧化硅中.用红外光谱(FTIR)研究了不同的处理方式对油酸铁表面官能团的影响及油酸的反应浓度和加热分解油酸铁的过程中升温速率对Fe₃O₄纳米颗粒的影响.结果表明,用乙醇和丙酮处理后的固态蜡状油酸铁表面的油酸基团会受到损害,将不利于加热分解时形成单分散性的Fe₃O₄纳 关键词： 3O₄纳米颗粒')" href="#">Fe₃O₄纳米颗粒 2包裹')" href="#">多孔SiO₂包裹 反相微乳液法 油酸铁     

V2CN2负载过渡金属双原子电催化固氮的第一性原理研究

电催化剂固氮能够在温和条件下催化氮气还原制氨.本工作基于第一性原理计算,系统地探究了分散在二维V₂CN₂上过渡金属二聚体(Fe, Mo, Ru)形成的双原子催化剂用于电催化固氮的可行性.双原子的协同作用使氮气得到较好的活化.吉布斯自由能计算表明,在V₂CN₂负载双铁原子(Fe₂@V₂CN₂)体系进行的催化反应过电位最低,仅为0.25 eV.进一步的分子动力学计算表明Fe₂@V₂CN₂具有较好的结构稳定性,并且该体系能很好的抑制HER反应的发生.通过与Mo₂@V₂CN₂,Ru₂@V₂CN₂体系的比较可知,氮气分子的吸附构型以及HER反应的竞争对催化剂的选择影响很大.我们的计算能够为双原子催化剂的设计提供更多的依据.     

磁场强化流化床铁基SCR脱硝的物理与化学效应

研究了磁场对流化床铁基SCR脱硝的物理、化学作用。其物理作用体现在磁场抑制和消除流化床中的气泡,增加气固接触效率,从而增强流化床磁性Fe₂O₃催化剂SCR脱硝的传递效率。其化学作用可归结为:1)颗粒磁化产生的边界效应使顺磁性NO受Faraday力的推动,增强了NO在磁性Fe₂O₃催化剂表面的化学吸附;2)亚铁磁性铁基催化剂和磁场的协同作用,促进了反磁性反应物向顺磁性产物的磁状态转变和反应中电子的迁移,促进了NH₃在磁性Fe（III）基上的活化;3)磁场影响自由基反应体系的有序性,促进自由基NH₂与NO的反应。     

孔雀石绿-铁(Ⅱ)体系催化动力分光光度法测定雨水中微量过氧化氢

基于在pH 4.0的H₂SO₄介质中,Fe（Ⅱ）对H₂O₂氧化孔雀石绿褪色反应的催化作用,建立了一种在常温下测定H₂O2浓度的催化光度分析方法。在孔雀石绿吸收峰618nm波长处测得的吸光度降低值（△A）与过氧化氢浓度在0—50μmol·L^-1范围内呈线性相关,回归方程为△A=0.0171C+0.0191,检出限为1.0μmol·L^-1（s/n=3）。本法可以方便、快捷的用于雨水中微量过氧化氢的测定,结果满意。     

Al与α-Fe2O3纳米界面铝热反应的从头计算分子动力学研究

在正则系综统下,温度为2000 K时,利用基于密度泛函理论的第一性原理分子动力学计算方法对Al与赤铁矿α-Fe₂O₃的铝热反应进行了研究. 模拟得出Fe–O键的数量随着时间的增加而减小,Al–O键和Fe–Fe键的数量随时间的增加而增大;同时Fe离子总的电荷量随时间的增加而减小,而Al离子总的电荷量随时间的增加而增大. 模拟结果表明,在Al/Fe₂O₃铝热反应中发生了氧化还原反应,Al被氧化,Fe离子被还原;在界面处生成Al–O键,Fe–O键发生断裂;氧化还原反应完成需约3 ps. 关键词： 铝热反应 密度泛函理论 分子动力学 正则系综     

单原子催化剂Ir1/MoS2表面上的NH3吸附与直接分解的第一性原理

NH₃的催化分解一直是制备高纯度氢的有效途径之一,因此具有良好的催化活性的贵金属被广泛的应用于催化解离的研究中.然而,由于纯金属催化剂的利用效率低,增加催化成本.最近的研究发现单原子催化剂Ir₁/MoS₂以其突出的优势被认为是一种潜在的能替代现有贵金属催化剂的材料.本文采用密度泛函理论与周期性平板模型相结合的方法,研究了NH₃在单原子催化剂Ir₁/MoS₂上的吸附与活化.结果表明:NH₃的优势吸附位为Ir原子的顶位,构型为倾斜结构(atop),NH₃与体系表面的金属Ir成键,吸附能达到1.63 eV,是化学吸附;进一步分析了NH₃直接催化分解的反应路径,给出了相应的反应热、活化能,结果显示NH₃在atop位的解离比脱附有利,第一步脱氢反应活化能最小,N-H键易断裂,第二步反应能垒较高,此步为整个反应的决速步.     

H3BO3对BaAl2Si2O8：Eu2+蓝色荧光粉物相组成和发光特性的影响

采用化学共沉淀法一次煅烧工艺合成了BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉.用X射线衍射仪、荧光分光光度计和扫描电镜测试了助熔剂H₃BO₃对BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉物相结构、发光性能、形貌等的影响.研究表明：化学共沉淀法一次煅烧工艺合成的BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉为单相,H₃BO₃的加入使基质结构由六方相转变成单斜相,并引起发射主峰位置和发射强度的变化;BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的发光强度随着H₃BO₃加入量的增加先增强,后减弱,当加入H₃BO₃的质量分数为1.5%时,发光强度最大;H₃BO₃的加入使合成BaAl₂Si₂O₈：Eu²⁺蓝色荧光粉的颗粒呈类球形,分布更加均匀,粒度更小. 关键词： 3BO₃')" href="#">H₃BO₃ 2Si₂O₈：Eu²⁺')" href="#">BaAl₂Si₂O₈：Eu²⁺ 发光特性 化学共沉淀法     

Solvent effects and potential of mean force study of the S_N2 reaction of CH_3F+CN~- in water

We used a combined quantum mechanics and molecular mechanics(QM/MM) method to investigate the solvent effects and potential of mean force of the CH_3F+CN~- reaction in water. Comparing to gas phase, the water solution substantially affects the structures of the stationary points along the reaction path. We quantitatively obtained the solvent effects' contributions to the reaction: 1.7 kcal/mol to the activation barrier and -26.0 kcal/mol to the reaction free energy.The potential mean of force calculated with the density functional theory/MM theory has a barrier height at 19.7 kcal/mol,consistent with the experimental result at 23.0 kcal/mol; the calculated reaction free energy at -43.5 kcal/mol is also consistent with the one estimated based on the gas-phase data at -39.7 kcal/mol.     

Comprehensive evolution mechanism of SOx formation during pyrite oxidation

Pyrite (FeS₂) oxidation during coal combustion is one of the main sources of harmful SO₂ emission from coal-fired power plants. Density functional theory (DFT) study was performed to uncover the evolution mechanism of SO_x formation during pyrite oxidation. The results show that chemisorption mechanism is responsible for O₂, SO₂ and SO₃ adsorption on FeS₂ surface. The presence of formed oxidation layer (Fe₂O₃) weakens the interaction between O₂ molecule and FeS₂ surface. The adsorbed O₂ molecule easily dissociates into active surface O atom for SO_x formation. The dissociation reaction of O₂ is activated by 77.38?kJ/mol, and exothermic by 138.46?kJ/mol. Compared to the further oxidation of SO₂ into SO₃, SO₂ prefers to desorb from FeS₂ surface. The dominant reaction pathway of SO₂ formation from the oxidation of the outermost FeS₂ surface layer is a three-step process: surface lattice S oxidation, SO₂ desorption and replenishment of S vacancy by activated surface O atom. The elementary reaction of surface lattice S oxidation has an activation energy barrier of 197.96?kJ/mol, and is identified as the rate-limiting step. SO₂ formation from the further oxidation of bulk FeS₂ layer is controlled by a four-step process: bulk lattice S migration, lattice S oxidation, SO₂ desorption and surface O atom deposition. Migration of lattice S from bulk position to the outermost surface shows a high activation energy barrier of 175.83?kJ/mol. The deposition process of surface O atom is a relatively easy step, and is activated by 21.05?kJ/mol.     

氧原子和甲基自由基反应机理的理论研究

用分子轨道从头算和密度泛函理论（DFT）中的B3LYP方法以及适中基组6－311＋G（2df,2p)对氧原子与甲基CH3反应进行了系统的研究。计算给出了通道上各斑点物种的构型参数、振动频率和能量。结果表明：CH2OH比CH3O稳定,能量约低26．63kJ/mol,且生成氢和甲醛为其最主要反应通道。     

The sticking and dissociation of NH3 on W(110): a three-state model

The kinetics of the adsorption of NH₃ on W(110) and its subsequent dissociation have been investigated using molecular beam techniques and temperature programmed desorption (TPD) for surface temperatures ranging from 140 to 700 K. NH₃ shows a wide desorption peak around 270 K and a smaller peak at 170 K while H₂ and N₂, produced by dissociation, desorbed at 550 and 1350 K, respectively, with kinetic parameters similar to those reported for H and N generated by adsorption of H₂ and N₂. At normal incidence and for a surface temperature of 140 K, the NH₃ sticking coefficient was found to decrease from unity at a beam energy of 0.8 kcal/mol to 0.5 for a beam energy of 5.4 kcal/mol. The sticking coefficient generally decreases with surface temperature to a value of 0.05 at 700 K, but, for a 5.4 kcal/mol beam, it exhibits a relative minimum near 300 K. The reflection coefficient of NH₃, for an angle of incidence of 49°, increases with temperature and incident beam energy in agreement with the sticking measurements. The TPD peak positions, sticking and reflection data are all well reproduced by a three-state model based on simple kinetics. The model assumes that NH₃ initially traps in a molecular state and that dissociation occurs by thermal activation into an intermediate state. At no temperature is the sticking probability enhanced by increasing the kinetic energy of the incident molecules and there is no evidence for a direct dissociation channel which has a translational energy barrier less than 5.4 kcal/mol.     

Mechanism of 4‐methyl‐1,2,4‐triazol‐3‐thiole reaction with formaldehyde. A DFT study

Contrary to the typical nucleophilic substitution, occurring on the sulfur atom of 4‐methyl‐1,2,4‐ triazol‐3‐thiole, the reaction with formaldehyde leads to the formation of the N? C bond rather than the S? C bond. The mechanism of this reaction has been characterized theoretically. Calculations indicate that the reaction proceeds via a cyclic transition state involving one solvent molecule with the Gibbs free activation energy of only 2 kcal/mol. The alternative pathway that leads to the S? C bond formation is about 5 kcal/mol more energetically demanding. Copyright © 2007 John Wiley & Sons, Ltd.     

过氧硝酸分解势能面的理论研究

使用密度泛函理论B3LYP/6-311+ G(2d,2p)研究了过氧硝酸的最低能量结构．采用耦合簇方法CCSD(T)/aug-cc-pVDZ首次分别扫描了过氧硝酸沿氧-氮和氧-氧键的分解势能面．计算结果表明在氧-氮势能面上,当O3—N4键长是2.82 ?时,对应的疏松过渡态的能垒是25.6 kcal/mol;在氧$-$氧键的势能面上,当O2—O3键长是2.35 ?时,对应的疏松过渡态的能垒是37.4 kcal/mol．这表明过氧硝酸更容易分解为HO₂和NO₂．     

铝阳极氧化过程中氢对氧迁移影响的理论研究

为了研究铝阳极氧化过程中离子在阳极反应中的行为,利用第一性原理研究了氢原子对氧原子在铝(111)表面的吸附迁移行为的影响及氧原子向铝晶体内部的渗透行为的影响.结果表明,由于“抽象”(abstract)效应,氢原子的存在大大降低了氧进入铝晶体的能垒.氢原子的引入也影响了氧原子在铝晶体中的扩散,这可以显著降低氧原子在四面体间隙位置之间迁移的活化能(从1.23eV到0.35eV).这些结论助于我们了解阳极氧化过程和离子迁移过程.     

Quantum chemical study on the mechanism of intramolecular cyclization of 2‐benzyloxyphenyl trimethylsilyl ketone to give the benzofuran derivatives

Quantum chemical calculations have been performed to explore the mechanism of intramolecular cyclization of 2‐benzyloxyphenyl trimethylsilyl ketone (acylsilane) to give the benzofuran derivatives stereoselectively. This reaction involves a formation of siloxycarbene intermediate and a C–H bond insertion of siloxycarbene. The comparative studies on three possible insertion of siloxycarbene show that the concerted insertion of siloxycarbene into C–H bond (pathway a), which needs overcoming an energy barrier of 45.1 kcal/mol, is the most unlikely pathway, and the stepwise insertion of siloxycarbene without spin multiplicity change (pathway c) is energetically more favorable than the stepwise insertion of siloxycarbene with spin multiplicity change (pathway b). More importantly, this work can provide an insight into the stereoselectivity in this reaction in atomic molecular level. The formation of siloxycarbene is calculated to be endergonic by 22.9 kcal/mol with an energy barrier of 30.2 kcal/mol, being the rate‐determining step of the whole process. Copyright © 2011 John Wiley & Sons, Ltd.     

A theoretical study on the bimolecular reactions encountered in the pyrolysis of acetamide

Bimolecular reactions of acetamide with acetamide itself, acetimidic acid and acetic acid are investigated to account for the formation of the three major experimental products from the pyrolysis of acetamide, namely ammonia, acetic acid and acetonitrile. This mechanism involves bimolecular deammonation reactions to form acetamide anhydride, acetic anhydride and N‐acetyl acetamide, and the subsequent fragmentation of these intermediates into acetic acid and acetonitrile. It is found that the overall reaction barrier for the formation of the three major experimental products from the bimolecular reaction of acetamide with its enol form (acetimidic acid) amount to a 36.1 kcal/mol barrier. This barrier is in excellent agreement with the corresponding experimental data from the self‐condensation of acetamide. This finding stresses on the role of acetimidic acid as a major intermediate in the pyrolysis of acetamide. The calculated activation barriers for the two available pathways in the bimolecular reaction of acetamide and acetic acid into imide and N‐acetyl acetamide (36.3 kcal/mol and 24.0 kcal/mol) is in accord with the corresponding experimental activation energy of 30.1 kcal/mol for the autocatalytic reaction of acetamide with the acetic acid. Reaction rate constants are obtained for all plausible reactions. Kinetic data presented herein should be instrumental in building a robust model for the decomposition of N‐alkylated amides, that is, a major structural entity in biomass. Copyright © 2011 John Wiley & Sons, Ltd.     

Water-enhanced catalysis of CO oxidation on free and supported gold nanoclusters

The enhancement by water molecules of the catalytic activity of gas-phase and supported gold nanoclusters toward CO oxidation is investigated with first-principles calculations. Coadsorption of H(2)O and O(2) leads to formation of a complex well bound to the gold cluster, even on a defect-free MgO(100) support. Formation of the complex involves partial proton sharing between the adsorbates, that in certain configurations results in proton transfer leading to the appearance of a hydroperoxyl-like complex. The O-O bond is activated, leading to a weakened peroxo or superoxolike state, and consequently the reaction with CO to form CO2 occurs with a small activation barrier of approximately 0.5 eV. A complete catalytic cycle of the water-enhanced CO oxidation is discussed.