Preparation of Zeolite X Membranes on Porous Ceramic Substrates with Zeolite Seeds

Zeolite X membranes were investigated by in-situ hydrothermal synthesis on porous ceramic tubes precoated with zeolite X seeds or precursor amorphous aluminosilicate, and porous α-Al2O3 ceramic tubes with a pore size of 50-200 nm were employed as supports. Zeolite X crystals were synthesized by the classic method and mixed into deionized water as a slurry with a concentration of 0.2-0.5wt%, having a range of crystal sizes from 0.2 to 2μm. Crystal seeds were pressed into the pores near the inner surface of the ceramic tubes, and crystallization took place at 95℃ for 24-96 h. It was also investigated that Boehmite sol added with zeolite X seeds was precoated on ceramic supports to form a layer of r-Al2O3 by heating, and hydrothermal crystallization could then take place to prepare the zeolite membranes on the composite ceramic tubes. The crystal species were characterized by XRD, and the morphology of the supports subjected to crystallization was characterized by SEM. The composite zeolite membranes hav     

Enhanced Crystallization Rate of Biodegradable Poly(ε-caprolactone) by Cyanuric Acid as an Efficient Nucleating Agent

The influence of cyanuric acid(CA) as an efficient nucleating agent on the crystallization behavior and morphology of biodegradable poly(ε-caprolactone)(PCL) was extensively studied in this work with several techniques for the first time. The nonisothermal melt crystallization behavior and overall isothermal melt crystallization rate of PCL were significantly enhanced by only a small amount of CA. The addition of CA apparently improved the nonisothermal melt crystallization peak temperature, overall isothermal melt crystallization rate, and nucleation density of PCL spherulites, but did not modify the crystallization mechanism and crystal structure of PCL, indicating that CA was an efficient nucleating agent for the crystallization of PCL. The possible nucleation mechanism of CA on the crystallization of PCL was also discussed on the basis of their crystal structures.     

Studies on molecular weight distribution of carbon fiber polymer precursors synthesized using mixed solvents

The molecular weight distributions were estimated for carbon fiber polymer precursors such as poly（acrylonitrile-co -itaconic acid） synthesized by semi batch solution polymerization in mixed solvents media with the azonitrile compounds as initiator under the different ratios of solvent and non solvent from 0.75 to 2.5 in weight.The copolymer was characterized by using Fourier transform infrared spectroscopy（FTIR） and nuclear magnetic resonance（¹H-NMR） analyses.The molecular weight distributions were evaluated by M_v/M_n ratios estimated from viscosity and osmotic measurements,and M_w/M_n estimated from size exclusion chromatography.The molecular weight distributions of these polymers as determined from M_v/M_n and M_w/M_n are 2.9 to 3.2 and 2.0 to 2.5 respectively.The molecular distributions were close to a narrow distribution of 2.0 when the solvent/non-solvent ratio was varied between 1.4 and 2.0.Intrinsic viscosity[?]as a function of molecular weight of poly（acrylonitrile-co-itaconic acid） was evaluated by means of low angle laser light scattering with size exclusion chromatography（SEC-LALLS） and viscometry with SEC（SEC-VISCO）.The relationship between[?]and M_w for poly（acrylonitrile-co-itaconic acid） in DMF at 50℃was[?]= 1.1×10^-5M_w^0.79,where[?]is obtained in dL/g.     

Effects of molecular weight on the crystallization and melting behaviors of poly(L-lactide)

In this study, a series of monodispersed poly(L-lactide)(PLLA) were synthesized by the ring-opening polymerization with Schiff base aluminum catalyst, and the effects of the number-average molecular weight(Mn) on the crystallization and melting behaviors of PLLA were investigated by differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WAXD). The total crystallization rate of PLLA was Mn-dependent, which reached the maximum value for PLLA with Mn of 18.6 kg/mol. In addition, when Mn of PLLA was 18.6 kg/mol, the melting enthalpy(ΔHm) showed a maximum value(87.1 J/g), which was the highest reported value till now. The critical temperature for change of crystal formation from ?-form to ?-form crystals increased in the isothermal crystallization process with Mn increasing. In the reheating procedure, high-Mn PLLA demonstrated a small exothermal peak prior to the dominant melting peak, corresponding to crystal transition from ?- to ?-form, but low-Mn PLLA didn't show the peak of crystal transition. These different crystallization and melting behaviors were attributed to the different chain mobility of PLLA with different Mn.     

Crystallization behavior of disproportionately high and low molecular weight PEO blends

The crystallization behavior of PEOs with molecular weight of 1 Ok and 200k as well as their blends was studied in details. The results show that the lower molecular weight PEO crystallizes with faster crystallization rate as judged from a shorter time for completing the crystallization. On the other hand, the higher molecular weight PEO crystallizes at relatively higher temperature, indicating an early start of crystallization compared with the lower molecular weight one. The blends of these two PEOs with different blend ratios always cocrystallize during the cooling processes. It is confirmed that mixing of the 10k PEO with the 200k one is in favor of the crystallization of the system. This is not only demonstrated by the early start of the crystallization at higher crystallization temperature, and also a faster crystal growth of the blend with respect to the 200k PEO. The crystallization of the blends at higher temperature is caused by an early start of nucleation and an increment of nucleus density. This may originate from the density fluctuation of the blend and a reduction in energy barrier for nucleation. Moreover, it is found that the crystallinity of the 1 Ok PEO rich blends increases with increasing concentration of the 10k PEO. This is caused by the solvent effect of the 10k PEO toward the 200k PEO. On the other hand, the crystallinity of the 30/70 （10k/200k） PEO blend is decreased a little bit. This may be a balanced result of the improved crystallization of the 200k PEO at the expense of the high crystallization ability of the 1 Ok PEO.     

Studies on the synthesis and properties of malachite green imprinted polymer

A new molecularly imprinted polymer was synthesized with malachite green (MG) as molecular template, methacrylic acid (MAA) as functional monomer, ethylene dimethacrylate (EDMA) as crosslinker, and azobisisobutyronitrile (AIBN) as initiator. Recognition properties of the MG imprinted polymer were studied by equilibrium adsorption and HPLC. The results showed that the imprinted polymer had good affinity and marked selectivity for MG, and can separate MG with its analogue commendably. The new polymer can be used for the enrichment of MG in complex sample, and can work as separation media to separate and detect MG by HPLC.     

Synthesis,Characterization and Application of Methyl 3,5-Disulfo-benzoate Dipotassium Dihydrate as Nucleating Agent for Poly（L-lactide）

A newly synthesized aromatic sulfonate compound,complex 2 with formula of K2[H3COOC-C6H3（SO3）2]·2H2O（methyl 3,5-disulfo-benzoate dipotassium dihydrate） was synthesized and characterized by elemental analysis,infrared（IR） spectrometry,nuclear magnetic resonance（NMR） and crystal structure measurement.Single-crystal X-ray diffraction（XRD） revealed that complex 2 crystallized in the triclinic system with space group P（i）.Complex 2 was used as nucleating agent for poly（L-lactide）（PLLA）.The crystallization of PLLA with powder of complex 2 was investigated by means of differential scanning calorimetry（DSC） and polarized optical microscopy （POM）.The results prove that complex 2 was effective as nucleating agent for PLLA.It could accelerate crystallization by reducing the induction time and increasing the density of nuclei in the crystallization process.The half-time of crystallization（t0.5） for pure PLLA was about 8 times longer than that of PLLA sample with 1.0％（mass fraction） of complex 2.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

Synthesis and Characterization of Poly（butylene adipate-co-terephthalate） Catalyzed by Rare Earth Stearates

Rare earth （Nd, Y, La, Dy） stearates have been synthesized and used as single component catalysts for the polycondensation of dimethyl terephthalate, adipic acid and 1,4-butanediol for the first time preparing biodegradable poly（butylene adipate-co-terephthalate） （PBAT） with high molecular weight, The microstructures of PBAT were characterized by ^1H NMR spectra. The PBAT exhibits good mechanical properties such as high tensile strength （ca. 20 MPa） and long break elongation （〉700%）.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

Novel poly(butylene succinate-co-lactic acid) copolyesters: Synthesis, crystallization, and enzymatic degradation

A series of aliphatic biodegradable poly(butylene succinate-co-dl-lactide) (PBSLA) copolyesters were synthesized with the aim of improving the degradation rate of poly(butylene succinate) (PBS) by incorporation of dl-oligo(lactic acid) (OLA) into the PBS molecular chains. The composition and sequential structure of the aliphatic copolyesters were investigated by proton nuclear magnetic resonance (¹H NMR) spectroscopy. The crystallization behaviors, the crystal structure and morphology of the copolyesters were investigated by using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarizing optical microscopy (POM), respectively. The results indicate that the crystallization of the copolyesters was restricted by the incorporation of lactide (LA) units, which further tuned the mechanical properties of the copolyesters. The copolyesters could form complete spherulites and exhibit the same crystal structure as that of PBS. Enzymatic study indicated that the copolyesters with higher content of LA units degraded faster, and the degradation began in the amorphous regions and then in the crystalline regions. The morphology and the resulting degradation products of the copolyesters were investigated by scanning electron microscopy (SEM) and ¹H NMR analysis during the degradation process.     

Study on the application of the narrow distribution and controlled molecular weight hindered amine lighter stabilizers in poly(butylene succinate)

A series of hindered amine light stabilizer (HALS) with controlled molecular weight and narrow distribution was synthesized by reversible addition-fragmentation chain transfer(RAFT) polymerization, and its application in poly (butylene succinate) (PBS) was studied through accelerated aging experiments. The effects of different molecular weight light stabilizers on the degradation of PBS were studied. The aging degree and mechanism of PBS were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM) and mechanical properties testing. The extraction experiment was also carried out to study the migration of light stabilizers in PBS. Finally, the biodegradability test was conducted to study the effect of light stabilizers on biodegradation capability. The results showed that the hindered amine light stabilizer with high molecular weight can protect the PBS material to a great extent and reduce the photodegradation degree compared with the one with low molecular weight.     

Transesterification and crystallization behavior of poly(butylene succinate)/poly(butylene terephthalate) block copolymers

The block copolymers of poly(butylene succinate) (PBS) and poly(butylene terephthalate) (PBT) were synthesized by melt processing for different times. The sequence distribution, thermal properties, and crystallization behavior were investigated over a wide range of compositions. For PBS/PBT block copolymers it was confirmed by statistical analysis from ¹H-NMR data that the degree of randomness (B) was below 1. The melting peak (T_m) gradually moved to lower temperature with increasing melt processing time. It can be seen that the transesterification between PBS and PBT leads to a random copolymer. From the X-ray diffraction diagrams, only the crystal structure of PBS appeared in the M1 copolymer (PBS 80 wt %) and that of PBT appeared in the M3 (PBS 50 wt %) to M5 (PBS 20 wt %) copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 147–156, 1998     

Biodegradable poly(butylene succinate-<Emphasis Type="Italic">co</Emphasis>-butylene dimerized fatty acid)s: Synthesis,crystallization, mechanical properties,and rheology

Poly(butylene succinate-co-butylene dimerized fatty acid) (P(BS-co-BDFA)) copolyesters were synthesized from succinic acid (SA) and dimerized fatty acid (DFA) with 1,4-butanediol (BDO) through a two-step process of esterification and polycondensation. The polyester compositions and physical properties of copolyesters were investigated by GPC, ¹H NMR and ¹³C NMR, DSC, WAXD, DMA, TGA, tensile and rheology test. The melting temperature (T_m), and crystallization temperature (T_c) decreased gradually as the content of DFA monomer increased. P(BS-co-BDFA) copolyesters showed the same crystal structure as the PBS homopolyester. Besides, TGA results indicated that P(BS-co-BDFA)s were of higher thermal stabilities. Moreover, it was found that the synthesized P(BS-co-BDFA)s showed the maximum elongation at break (591%) as the DFA contents were 10 mol%. Rheology analysis indicated that the viscoelastic behavior of the polyesters greatly depended on the molecular weight of polyesters.     

A biobased aliphatic polyester derived from 10-hydroxydecanoic acid: Molecular weight dependence of physical properties

Poly(10-hydroxydecanoate) (PHDA) is of interest as a new-type aliphatic polyester due to its bioresource and flexible mechanical property. A series of PHDAs with varied molecular weights (M_n from 27 kg/mol to 74 kg/mol) were prepared by optimized melt polycondensation of 10-hydroxydecanoic acid (HDA). Through DSC, WAXD, POM and tensile tests, the effects of molecular weight on the physical properties, including thermal properties, crystallization behavior, crystal morphology, rheological behavior and mechanical properties of PHDA were studied in detail. The results demonstrated that the physical properties of PHDA largely rely on the molecular weight. In particular, the brittle-ductile transition of PHDA occurred when the molecular weight increased up to 55 kg/mol. With the increase of molecular weight, the elongation at break was largely improved and finally exceeded 1400%. The ultimate tensile strength kept about 20 MPa. Hence, PHDA has a PE-like mechanical property. Our work highlights that PHDA is a polymer with excellent performance, which provides an alternative to durable petroleum resourced packaging materials.     

Crystalline Supramolecular Nanofibers Based on Dehydrobenzoannulene Derivatives

Supramolecular nanofibers (SNFs) composed of low‐molecular‐weight π‐conjugated molecules exhibit attractive optical and electrical properties and are expected to be the next optoelectronic materials. In this work, five crystalline SNFs have been constructed from three dehydrobenzoannulene (DBA) derivatives. The DBAs were designed to assemble in one dimension in a strategy based on anisotropic crystal growth. The crystallinity of the SNFs allowed the molecular arrangements in the SNFs to be determined. Therefore the mechanism of construction and correlations between the molecular arrangements and optical and electrical properties could be considered. The results clearly indicate that the properties of the SNFs are affected by the chemical structures and molecular arrangements. Moreover, one of the SNFs exhibits a high charge‐carrier mobility (Σμ=0.61 cm² V^?1 s^?1) because of its crystallinity and appropriate molecular arrangement. This systematic experimental study based on a proposed strategy has provided information for improving the electrical properties of SNFs. This strategy will lead to highly functional SNFs.     

Supercapacitor performance of activated carbon derived from rotten carrot in aqueous,organic and ionic liquid based electrolytes

In this work, we report the synthesis of porous activated carbon (AC). AC was derived from rotten carrot, at different values of activating temperature under inert atmosphere, employing chemical activation method and ZnCl₂ as activation agent. On the basis of results observed by surface area and pore size analysis, effect of activation temperature on synthesized AC was determined. Other material properties such as morphology, thermal stability, vibrational response, and crystal structure of prepared AC were studied using standard techniques of material characterization. Further, the electrochemical performance of synthesized AC was studied as an electrode, in aqueous, organic and ionic liquid based electrolyte. It was found that the synthesized AC based electrode exhibits highest specific capacitance (135.5?F?g^?1 at 10?mHz) in aqueous electrolyte and highest specific energy (29.1?Wh?kg^?1 at 2.2?A?g^?1) and specific power (142.5?kW?kg^?1 at 2.2?A?g^?1) in ionic liquid based electrolyte. This shows the suitability of synthesized material for use in energy storage applications.     

Effects of comonomer sequential structure on thermal and crystallization behaviors of biodegradable poly(butylene succinate‐co‐butylene terephthalate)s

In this work, new investigations on the effect of comonomer sequential structure on the thermal and crystallization behaviors and biodegradability have been implemented for the biodegradable poly(butylene succinate‐co‐butylene terephthalate) (PBST) as well as aliphatic poly(butylene succinate) (PBS). At first, these copolyesters were efficiently synthesized from dimethyl succinate and/or dimethyl terephthalate and 1,4‐butanediol via condensation polymerization in bulk. Subsequently, their molecular weights and macromolecular chain structures were analyzed by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. By means of differential scanning calorimeter (DSC) and wide‐angle X‐ray diffractometer (WAXD), thermal and crystallization behaviors of these synthesized aromatic–aliphatic copolyesters were further explored. It was demonstrated that the synthesized copolyesters were revealed to have random comonomer sequential structures with thermal and crystallization properties strongly depending on their comonomer molar compositions, and that crystal lattice structures of the new crystallizable copolyesters shifted from the monoclinic crystal of semicrystalline PBS to triclinic lattice of the poly(butylene terephthalate) (PBT) with increasing the terephthalate comonomer composition, and the minor comonomer components were suggested to be trapped in the crystallizable component domains as defects. In addition, the enzymatic degradability was also characterized for the copolyesters film samples. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1635–1644, 2006     

μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]的合成、表征和液晶性

设计合成了未见文献报道的μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]配合物9个, 研究了其合成、分离、纯化方法, 用MS, ¹H NMR, IR, UV, 元素分析等方法剖析确证了目标化合物的结构, 其结构我们认为是μ-氧桥联的二聚体结构, 且存在两种典型空间构象结构(重叠式和交叉式), 表现为同一系列化合物存在四类¹H NMR谱. 用差示扫描量热仪和偏光显微镜研究了这9个化合物的液晶性, 发现9个化合物均具有液晶性, 多为升温降温互变液晶, 具有丝状光学织构. 有一至三个中介相, 相变起始温度最低为－6 ℃, 最高为210 ℃; 相变区间最宽为301 ℃, 最窄为50 ℃; 清亮点(T_c)最高315 ℃, 最低147 ℃. 考察了烷氧基链长、配位金属离子及配合物分子空间结构对液晶性能的影响. 我们认为这种μ-氧桥联的二聚体结构比单层平面卟啉及其金属配合物具有更好的液晶性.     

Growth and characterization of thiosemicarbazide hydrochloride: a semiorganic NLO material

Thiosemicarbazide hydrochloride (TSCHCL) was synthesized by mixing thiosemicarbazide and hydrochloride in 1:1 molar ratio in double distilled water. Single crystals of TSCHCL were grown by slow evaporation at room temperature and were characterized by single crystal X-ray diffraction study to determine the molecular structure and by FT-IR, ¹H and ¹³C NMR spectral analyses to confirm the synthesized compound. Thermogravimetric and differential thermal analyses reveal the thermal stability of the crystal. The transmission spectrum of TSCHCL showed that the crystal is transparent in the wavelength range 380–1100 nm. High resolution X-ray diffractometry (HRXRD) was employed to evaluate the perfection of the grown crystal. Mechanical properties of the grown crystal were studied using Vickers microhardness test. Second harmonic generation efficiency of the powdered TSCHCL was tested using Nd:YAG laser and is ∼1.5 times that of potassium dihydrogen orthophosphate.