新型鳞片状聚合物修饰硅胶填料固定化酶的制备及其在蛋白质组鉴定中的应用

利用原子转移自由基聚合法制备了鳞片状聚合物修饰的硅胶填料,将其作为一种新型的固定化酶载体,实现了蛋白酶的高密度固定,从而明显缩短了复杂蛋白质样品的酶解时间。使用标准蛋白质对固定化酶的酶解效率进行了考察,结果表明: 鳞片状聚合物修饰的新型固定化酶硅胶填料具有较高的酶解效率,酶解标准蛋白质1 min后,鉴定到肽段的氨基酸序列覆盖率可达95%以上。将该固定化酶硅胶填料成功应用于大肠杆菌全蛋白质的酶解,从2 min酶解肽段的混合物中鉴定到的蛋白质数量超过同样条件下溶液酶解12 h的结果。另外,该固定化酶硅胶填料可以重复使用,其酶解效率具有良好的稳定性和重现性;该固定化酶具有较好的样品回收率,因而可以应用于蛋白质组学研究中。     

新型亲水聚合物修饰硅胶颗粒固定化酶的制备及在蛋白质组鉴定中的应用

采用原子转移自由基聚合法制备了亲水聚合物修饰的硅胶颗粒作为一种新型固定化酶载体,在实现胰蛋白酶高密度固定的同时,显著降低了载体材料非特异性吸附导致的样品损失。因此,该固定化酶材料兼具高酶解效率和高回收率的特性。以标准蛋白质牛血清白蛋白(BSA)为样本,使用该固定化酶1 min即可完成酶解,鉴定到肽段对BSA的氨基酸序列覆盖率可达90%以上。该固定化酶材料成功应用于酵母菌全蛋白质复杂样本的酶解,从3 min酶解产物中鉴定到666个蛋白质,超过同样条件下溶液酶解12 h的鉴定结果。     

原子转移自由基聚合修饰银丝固定化酶反应器的制备及在蛋白质组鉴定中的应用

针对传统溶液酶解存在的酶解时间较长、酶自切物干扰以及蛋白酶不能重复使用等缺陷,通过电子转移生成催化剂的原子转移自由基聚合法修饰银丝,并以其为载体制备了一种新型的固定化酶反应器。用质谱考察了银丝固定化酶反应器(SW-Trypsin)的酶解效率、重复性和回收率。结果表明:绒毛状聚合物修饰的SW-Trypsin的酶解效率较高,酶解标准蛋白牛血清白蛋白(BSA)20 min后,肽段的氨基酸序列覆盖率可达93%,高于传统溶液酶解方法酶解16 h所得79%的覆盖率。使用该固定化酶反应器于一个月内8次酶解BSA所得的氨基酸序列覆盖率在89%到97%之间,平均覆盖率为94%,显示出良好的稳定性。另外,该固定化酶反应器酶解马心肌红蛋白(MYO)的回收率为87.67%。最后,用SW-Trypsin酶解腾冲嗜热菌全蛋白20 min,所鉴定到的氨基酸序列覆盖率和蛋白数量与同样条件下溶液酶解16 h的结果接近,且零漏切位点肽段的比例更高。加之容易分离的优点,SW-Trypsin在蛋白质组学的应用中具有良好的前景。     

采用磁性载体制备的固定化酶反应器的载体粒径对蛋白质酶解性能的影响

研究了以不同粒径的磁性颗粒为载体的固定化酶反应器在蛋白质酶解过程中,其粒径大小对团聚、酶解效率和漏切位点等的影响。实验结果表明,纳米级颗粒的酶负载量为亚微米级的3.5倍左右。但当酶固定量相同时,酶解效率基本相当。而在一定程度上加大磁性颗粒的粒径后,团聚现象得到明显改善。选择磁性载体粒径为20 nm的固定化酶反应器,对其性能进一步考察。结果显示胰蛋白酶与牛血清白蛋白(BSA)的质量比为1:1时,即能于1 min内实现快速酶解;当酶解10 min时,其零漏切位点肽段数和蛋白质序列覆盖率基本达到稳定,并明显优于溶液酶解水平。通过对漏切位点的统计分析比较,发现固定化酶解与溶液酶解时的漏切位点规律基本类似。因此,采用不同粒径磁性载体制备的固定化酶反应器均可在蛋白质组学研究中提供快速、高效的酶解。     

蛋白质组学中的固定化酶反应器制备的研究进展

固定化酶反应器作为蛋白质组学研究中"bottom-up"策略重要的组件,具有酶解快速、酶解效率高、酶稳定性和活性高、简单易操作、能够与多种检测方式联用等优点,对于发展高效快速的蛋白质组学分析方法具有重要意义。本文就固定化酶反应器的制备方法及其在蛋白质组学中的应用做简单的概述,着重介绍酶的固定方法、固定化酶的载体、用于固定的酶的种类。近几年固定化酶反应器的研究集中于提高固酶量、保持酶活性、增加酶解效率、减小非特异性吸附等方面。研究结果表明,采用纳米材料、整体材料等新型载体,提高载体亲水性,采用多酶同时酶解等方法能够有效改善固定化酶反应器的性能,提高蛋白质的鉴定效率。     

固定化胰蛋白酶整体小柱的制备及其用于微量蛋白质的快速酶解

发展了一种光引发聚合法制备固定化胰蛋白酶整体小柱的方法,以用于微量蛋白质的快速酶解。整体小柱由功能单体4-戊烯酸琥珀酰亚胺酯、甲基丙烯酸羟乙酯,交联剂季戊四醇三丙烯酸酯和三元致孔剂二甲基亚砜、N,N-二甲基甲酰胺、十二醇在20 μL的移液器吸头尖端原位聚合而成。形成整体柱后,胰蛋白酶分子通过氨基与琥珀酰亚胺酯反应实现固定化。系统研究了聚合溶液中活性酯含量与柱床体积对胰蛋白酶固载量的影响,评价了固定化酶整体小柱对标准蛋白细胞色素C和牛血清白蛋白的酶解效率,以及整体小柱的稳定性和重复性。结果表明,在离心辅助下,酶解过程可在10 min内完成,批次间具有良好的重复性。最后将固定化酶整体小柱应用于1×10⁵个人急性早幼粒白血病（NB4）细胞与人急性T细胞白血病（Jurkat T）细胞的快速酶解,经纳升级液相色谱与高分辨质谱联用分析后鉴定得到2489个和2572个蛋白质。相比于溶液状态下的酶解,分别提高了2.2%和6.1%的蛋白鉴定数量,展现了其在蛋白组学研究中的应用潜力。     

多层开管毛细管酶反应器的制备及在蛋白质酶切中的应用

以石英毛细管作为酶固定化的载体, 在毛细管内壁上逐步合成树枝形大分子聚酰胺-胺(PAMAM), 再通过交联剂戊二醛将胰蛋白酶直接键合到该大分子的末端氨基上, 并对酶固定化条件进行了优化, 制备了多层酶反应器. 利用该酶反应器对马心细胞色素C等蛋白质进行了酶切, 并对酶切的条件进行了优化. 实验结果表明, 该固定化酶反应器具有较高的酶切效率、良好的重现性和稳定性, 可用于蛋白质组学的研究.     

基于核酸适配体的微流控芯片酶反应器用于蛋白质的分析

将核酸适配体作为胰蛋白酶固定化介质,制备了一种新型的微流控芯片酶反应器,并与高效液相色谱-串联质谱联用,搭建了在线分析平台;分别使用标准蛋白及混合蛋白样品对芯片的酶解效率及联用平台的分析能力进行了初步评价。结果表明,5 ng肌红蛋白经该平台分析后肽段覆盖率可达到37%;对500 ng混合蛋白进行3次平行分析,肽段覆盖率及相对标准偏差分别为44.3%、6.5%(牛血清白蛋白), 65.0%、2.7%(肌红蛋白)和62.0%、5.6%(细胞色素c);初步实验表明,该在线分析平台具有检测灵敏度高、重现性好、酶解效率高的特点,有望在蛋白质组学分析中发挥重要作用。     

基于DNA链置换反应的新型固定化酶反应器制备及应用

建立了一种新型的酶固定化方法,采用DNA链置换反应成功地在单链DNA标记的磁性纳米粒子上实现了酶的链置换无损更替。该技术可实现目标酶的再利用,节约了生产成本。制备的固定化胰蛋白酶微反应器具有较好的重复利用性和高酶切效率,重复使用10次后仍可保持原酶活性的86%;利用链置换反应制备的MNPs@DNATrypsin酶切马心肌红蛋白5 min后,即可获得95%±0%(n=3)的氨基酸序列覆盖率,远超过相同条件下自由酶酶切12 h的结果。实验表明,发展的固定化酶技术具有高磁响应性,便于从反应体系中回收固定化酶和重复使用,同时此技术可显著提高酶活性,因此可用于固定各种重要的酶,同时可将其广泛应用于各种酶促反应中。     

固相PGA酶催化一步法合成氨苄西林的工艺研究

采用吸附法将青霉素酰化酶(PGA)固定于AB-8树脂上,通过固相酶催化D-苯甘氨酸甲酯与6-氨基青霉烷酸(6-APA)反应制备氨苄西林,对酰化反应中的最适pH条件、溶剂体系、反应温度、反应时间、底物浓度进行实验研究。以氨苄西林收率和水解比为评价条件,固相酶最适催化pH值为6.5,通过正交实验分析表明,在异丙醇-PBS缓冲体系中,350mg PGA/AB-8(固定化酶活性113U·g~(-1))催化下,反应温度10℃,底物浓度(D-PGME∶6-APA)为3.5∶1,反应时间8h,氨苄西林收率达到71.3%。固相PGA酶重复回用6次,氨苄西林收率由71.3%降至63.6%。     

Proteolytic enzyme-immobilization techniques for MS-based protein analysis

Protein digestion utilizing proteases (e.g., trypsin, Lys C and other proteolytic enzymes) is one of the key sample-preparation steps in contemporary proteomics, followed by liquid chromatography coupled to mass spectrometry (MS). Tryptic digestion is traditionally performed in aqueous solutions, usually applying the enzyme and the sample in a 50:1 protein-to-protease ratio. Long digestion times (up to 24 h), auto-digestion sub-products and poor enzyme-to-substrate ratio are common issues with liquid-phase protein-digestion processes. The use of enzymes immobilized onto solid supports can minimize these problems by increasing enzyme-to-substrate ratios, significantly speeding up digestion times and reducing autolysis. The other main goal of protease immobilization is to obtain rugged, efficient enzyme reactors.In this article, we review the most important proteolytic enzyme-immobilization techniques with the main emphasis on fabrication of trypsin microreactors and nanoreactors and their utilization in bottom-up proteomics. We also discuss data reportedly obtained using the various immobilization protocols with respect to enzyme activity and MS-sequence coverage.     

Analytical characterization of a facile porous polymer monolithic trypsin microreactor enabling peptide mass mapping using mass spectrometry

A simple and rapid single-step method is presented to fabricate an enzyme reactor using trypsin immobilized on a macroporous polymer monolith. A reactor produced in a capillary format is ready to use within 1 h of preparation. The monomers making up the monolith, including N-acryloxysuccinimide for covalent immobilization of the enzyme, are mixed with trypsin and introduced into the column by capillary force for polymerization/immobilization. The enzyme activity from column-to-column is reproducible below 5% relative standard deviation (RSD), while the reactor is durable for at least 20 weeks when stored at room temperature. The apparent kinetic constants V(max) and K(m) are of value similar to those obtained by free trypsin in solution. Enzymatic digestion of proteins was shown to be feasible on a time-scale of seconds and submicromolar concentrations enabling peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.     

A Trypsin Immobilized Sol-Gel for Protein Indentification in MALDI-MS Applications

The proteolytic enzyme trypsin was chemically immobilized to an amine-functionalized sol-gel using adipoyl chloride under nonaqueous conditions and a nitrogen atmosphere. In the synthesis of the sol-gel, tetraethyl orthosilicate (TEOS), and 3-(2-aminoethylamino) propyldimethoxymethylsilane (AEAPMS) (50:50, v/v) were used, which provided convenient physical and chemical conditions to maintain catalytic activity of immobilized trypsin molecules for the digestion of proteins in proteomics applications. Bovine serum albumin was used as a model protein to perform enzymatic digestion using the trypsin immobilized sol-gel. The resulting peptides were analyzed by matrix-assisted laser desorption/ionization-mass spectrometry to evaluate the digestion performance and specificity of the sol-gel material. The trypsin immobilized sol-gel showed superior enzymatic activity in protein digestion and it was determined that the sol-gel material could be repeatedly used at least 25 times without significant activity loss in long-term use. Additionally, autocatalysis was prevented by immobilization of trypsin. The peptide digest having the highest purity was obtained for protein identification studies.     

Trypsin immobilization on an ethylenediamine-based monolithic minidisk for rapid on-line peptide mass fingerprinting studies

The aim of this work was to develop a trypsin-based micro-immobilized enzyme reactor prepared on a monolithic ethylenediamine BIA Separations CIM (convective interaction media) minidisk. The micro-immobilized enzyme reactor (IMER) was integrated in a liquid chromatography system hyphenated to electrospray ionization tandem mass spectrometry to carry out on-line protein digestion and identification. The performance of this IMER was compared with that obtained using a previously developed bioreactor prepared on a conventional CIM ethylenediamine disk and with that of the commercially available Poroszyme immobilized trypsin cartridge. In this work, we showed how different proteins were identified with good recoveries using a digestion time of 10 min only.     

Trypsin digestion of proteins on intact immobilized pH gradient strips for surface matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis

Isolelectric focusing (IEF) of proteins on immobilized pH gradient (IPG) strips is an integral part of two-dimensional (2D) electrophoresis-based proteomics. Proteins can be effectively analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) on the intact strip itself, leading to the creation of a virtual 2D map giving pI and MW information, bypassing the second dimension SDS-PAGE. Further, trypsin digestion of proteins on the strip can significantly aid the identification of IPG-separated proteins. However, the small size of the peptides leads to diffusion along and outside the gel matrix. In this study, we describe a simple spray-based procedure to perform 'on-strip' trypsin digestion of proteins embedded in IPG strips. Examination of intact myoglobin and its tryptic peptides shows that post-digestion diffusion of tryptic peptides is significantly minimized using this approach.     

Immobilized trypsin on epoxy organic monoliths with modulated hydrophilicity: novel bioreactors useful for protein analysis by liquid chromatography coupled to tandem mass spectrometry

The development of epoxy organic monoliths with modulated hydrophilicity for the preparation of novel trypsin-based microreactors is reported. Porous polymer monoliths have been prepared using methacrylate chemistry triggered by γ-ray irradiation. In situ polymerization has been optimized and extended to medium and high polymer densities using glycidyl methacrylate (GMA) as reactive monomer as well as to the hydrophilic nature of the co-monomers (glyceryl monomethacrylate, GlyMA and acrylamide, AMD). Enzyme immobilization was smoothly achieved by passing a buffered trypsin solution through the columns kept at room temperature. The activities of the immobilized enzyme were characterized by the apparent Michaelis constant (K(m)) and the apparent maximum velocity (V(max)) of the reaction using a non chromogenic, low-molecular mass substrate N-α-benzoyl-l-arginine ethyl ester (BAEE). For the kinetic constants determination a new off-line chromatographic procedure was developed on purpose. The most efficient IMERs were obtained by immobilizing trypsin on monolithic skeleton prepared with hydrophilic monomers (GlyMA and AMD). One of the most promising bioreactor was applied to the digestion of model proteins with different molecular weight and complexity such as human serum albumin (HSA), β-casein and ribonuclease B (RNase B), and the produced peptides were analyzed by liquid chromatography-mass spectrometry. Using a digestion time of only 25 min the proteins were recognized by the database with satisfactory sequence coverage, which was 78.22, 49.76 and 80.68% for HSA, β-casein and RNase B, respectively.     

Functionalized magnetic micro- and nanoparticles: optimization and application to micro-chip tryptic digestion

The preparation of an easily replaceable protease microreactor for micro-chip application is described. Magnetic particles coated with poly(N-isopropylacrylamide), polystyrene, poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(glycidyl methacrylate), [(2-amino-ethyl)hydroxymethylen]biphosphonic acid, or alginic acid with immobilized trypsin were utilized for heterogeneous digestion. The properties were optimized, with the constraint of allowing immobilization in a microchannel by a magnetic field gradient. To obtain the highest digestion efficiency, sub-micrometer spheres were organized by an inhomogeneous external magnetic field perpendicularly to the direction of the channel. Kinetic parameters of the enzyme reactor immobilized in micro-chip capillary (micro-chip immobilized magnetic enzyme reactor (IMER)) were determined. The capability of the proteolytic reactor was demonstrated by five model (glyco)proteins ranging in molecular mass from 4.3 to 150 kDa. Digestion efficiency of proteins in various conformations was investigated using SDS-PAGE, HPCE, RP-HPLC, and MS. The compatibility of the micro-chip IMER system with total and limited proteolysis of high-molecular-weight (glyco)proteins was confirmed. It opens the route to automated, high-throughput proteomic micro-chip devices.