铂合金氧还原催化剂:合成、结构和性能

质子交换膜燃料电池是一种将燃料中的化学能直接转化为电能的装置,它具有转化效率高、能量密度高、低温启动、易于操作等优点,因而被认为是最具发展前景的新能源利用方式,在电动汽车、便携电源及分散式电站有着广泛应用.但是,目前质子交换膜燃料电池技术的发展面临着巨大挑战,主要问题包括高成本、低功率密度和低寿命.众所周知,质子交换膜燃料电池中的阴极氧还原反应在酸性条件下是一个复杂的四电子过程,动力学速度缓慢,限制了电池的最终性能.目前大量使用的阴极氧还原催化剂是细小的铂或铂合金纳米颗粒负载在碳载体上,其成本占燃料电池总成本的比例最大.制约燃料电池商业化发展的另一个重要问题是电池寿命低,其中氧还原催化剂的稳定性是决定电池寿命的主要因素.在这样的研究背景下,如何降低催化剂中铂的用量、提高催化剂活性和稳定性显得尤为重要,这也是近年来国内外学者研究的热点.在铂基合金催化剂中,通常采用过渡金属元素作为掺杂元素,由于原子半径不匹配(几何效应)以及电子结构不同(电子效应),合金催化剂表现出优于纯铂催化剂的催化性能.近几年,对于铂基合金催化剂的研究已取得重大进展,以合金组成和结构研究为基础,通过精确控制原子结构、调控表面电子状态以及制备工艺,获得了各种特殊形貌的催化剂,大大提高了催化活性.本文深入综述了近年来铂基合金氧还原催化剂制备、形貌和性能,特别关注了催化剂形貌和催化活性之间的关系.值得注意的是,具有有序原子排列的铂合金催化剂不仅在半电池中表现出优异活性,在实际质子交换膜燃料电池中也显示了很好的活性和稳定性.另一方面,碳载体的形貌及微观结构也对提高催化活性和稳定性起到决定性作用,通过化学手段加强金属纳米颗粒与碳载体之间的相互作用也是提高催化剂稳定性的重要途径.尽管铂基氧还原催化剂在近几年取得了重要进展,但在实际商业化过程中还存在诸多挑战,本文在综述进展的基础上,对铂基催化剂的发展提出了展望.首先,对于氧还原反应机理仍需要深入研究,采用更加精确的理论模型模拟氧还原动力学过程,以获得影响催化活性的关键因素.其次,提高催化剂在膜电极中的催化活性和利用率.目前,氧还原催化剂在半电池测试中性能优异,但是实际燃料电池操作条件下其性能远不能达到要求,这与膜电极、催化剂层及扩散层结构相关.因此,基于不同铂基催化剂的特性,合理设计膜电极组件的结构是将催化剂进行实际应用的基础.最后,催化剂的稳定性仍需进一步提高,尽管目前大部分催化剂在实验室半电池研究中表现了很好的稳定性,但在实际燃料电池中的稳定性研究还不足,而且对催化剂在膜电极中性能衰退机理的研究也非常有限.因此,对于铂基氧还原催化剂的研发仍需要国内外科研工作者不懈的努力.     

Inorganic-organic Composite Membranes with Novel Microstructure for High Temperature Proton Exchange Membrane Fuel Cells

Nowadays,more and more fossil fuels are consumed and air pollurion has become a threat to the survival of people.Therefore,we need some other power sources to provide energy without damaging the environment.Proton exchange membrane fuel cells(PEMFCs)have received wide attention due to their advantages Such as high energy density and zero emission[1].Particularly, direct methanol fuel cells (DMFCs)were considered as the most suitable energy sources for electric vehicles(EVs)and portable electronics.     

Materials research and development focus areas for low cost automotive proton-exchange membrane fuel cells

Research and development of fuel cell materials often focuses on designing and discovering materials which will reduce the cost or improve the durability of an individual subcomponent. Examples of recent focus areas include non-Pt group metal catalysts, noncarbon catalyst supports, and nonfluorinated membranes. These studies rarely look at the entire system to comprehend the impact of these materials on the cost of ownership to the customer, including vehicle and fuel costs. This perspective takes a holistic look at the impact of functional materials on automotive fuel-cell systems and provides direction on which material properties will provide the greatest benefit. It also provides guidance on which material classes are the most likely to enable the achievement of systems which will result in the successful commercialization of light-duty fuel-cell vehicles.     

Status and challenges for the application of platinum group metal-free catalysts in proton-exchange membrane fuel cells

Platinum group metal-free electrocatalysts are an important class of materials for the sustainable energy economy and significant effort has been made toward developing platinum group metal-free catalysts to replace their costly Pt counterparts in fuel cell electric vehicles. The progress made in activity over the last decade is reviewed, along with synthesis strategies for more controlled active site formation and performance gains achieved through electrode engineering. The increased focus on durability, the growing understanding of degradation mechanisms, and the need for standard performance and accelerated stress test protocols are discussed.     

铂基氧还原电催化剂的结构演变

质子交换膜燃料电池的商业化有望在不久的将来实现更清洁的能源社会.然而,氧还原反应缓慢的反应动力学和苛刻的条件对质子交换膜燃料电池的寿命和成本产生了巨大的挑战.之前大多数铂基催化剂的设计都将重点更多地放在提高活性上.随着质子交换膜燃料电池的商业化,寿命问题也受到了更多的关注.对整个生命周期中结构演变进行深入地了解,有助于...     

Effect of load-cycling amplitude on performance degradation for proton exchange membrane fuel cell

Durability is one of the critical issues to restrict the commercialization of proton exchange membrane fuel cells (PEMFCs) for the vehicle application. The practical dynamic operation significantly affects the PEMFCs durability by corroding its key components. In this work, the degradation behavior of a single PEMFC has been investigated under a simulated automotive load-cycling operation, with the aim of revealing the effect of load amplitude (0.8 and 0.2 A/cm² amplitude for the current density range of 0.1−0.9 and 0.1−0.3 A/cm², respectively) on its performance degradation. A more severe degradation on the fuel cell performance is observed under a higher load amplitude of 0.8 A/cm² cycling operation, with ∼10.5% decrease of cell voltage at a current density of 1.0 A/cm². The larger loss of fuel cell performance under the higher load amplitude test is mainly due to the frequent fluctuation of a wider potential cycling. Physicochemical characterizations analyses indicate that the Pt nanoparticles in cathodic catalyst layer grow faster with a higher increase extent of particle size under this circumstance because of their repeated oxidation/reduction and subsequent dissolution/agglomeration process, resulting in the degradation of platinum catalyst and thus the cell performance. Additionally, the detected microstructure change of the cathodic catalyst layer also contributes to the performance failure that causes a distinct increase in mass transfer resistance.     

Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks

Automotive proton exchange membrane fuel cell stacks need to meet manufacturer specified rated beginning-of-life (BOL) performance before being assembled into vehicles and shipped off to customers. The process of “breaking-in” of a freshly assembled stack is often referred to as “conditioning.” It has become an intensely researched area especially in automotive companies, where imminent commercialization of fuel cell electric vehicles (FCEVs) demands a short, energy- and cost-efficient, and practical conditioning protocol. Significant advances in reducing the conditioning time from 1 to 2 days to as low as 4h or less, in some cases without the use of additional inert gases such as nitrogen, and with minimal use of hydrogen, and specialized test stations will be discussed.     

核壳结构催化剂应用于质子交换膜燃料电池氧还原的研究进展

质子交换膜燃料电池（PEMFCs）由于高比功率密度、高能量转换效率、环境友好和低温下快速启动等优点受到广泛关注,被认为是替代传统内燃机成为汽车动力的最理想能源转换装置。目前PEMFCs仍需较高载量的贵金属Pt作为电催化剂以保持转换效率,因此,开发低Pt量高活性的电催化剂对PEMFCs技术的商业化进程至关重要。核壳结构催化剂被证明是一种能有效降低电极Pt用量的策略,其既能通过结构优势提高贵金属Pt的利用率,又能通过电子或几何效应改善催化剂的催化活性和稳定性。本文首先简介了PEMFCs阴极氧还原反应（ORR）电催化剂构效关系的理论研究;其次综述了几种典型核壳结构电催化剂应用于ORR的研究进展;最后对ORR低Pt电催化剂的下一步研究方向作了展望。     

内核含Pd的Pt基核壳结构电催化剂

燃料电池汽车已被确立为我国的战略性新兴产业,目前正处于大规模商业化的前夜,铂基电催化剂作为质子交换膜燃料电池的核心材料之一,其活性、耐久性和成本制约着这一洁净能源技术的进一步发展。高性能低铂核壳电催化剂被广泛认为有望解决这一瓶颈问题,虽然国内外在这一领域的研究取得了诸多重要的进展,但是仍存在着制备过程复杂、非铂贵金属内核尺寸较大及核壳结构宏观表征困难等问题。本文介绍两种相对简单、易放大的制备方法,即一锅法和液相合成结合区域选择原子层气相沉积法,均获得了性能优良的Pd3Au@Pt/C核壳结构电催化剂,Pd3Au内核尺寸控制在约5 nm,并利用循环伏安测试和甲酸氧化反应从宏观角度研究了铂层在内核表面的覆盖情况,探索了含钯核壳结构电催化剂的新型宏观表征方法。     

Increasing durability of Pt-surface-enriched nanosize structure catalysts by multi-step platinum deposition

Journal of Solid State Electrochemistry - The sluggish reaction of oxygen reduction in proton-exchange membrane fuel cells (PEMFCs) and the durability of platinum-based catalysts have been major...     

Rare Earth Evoked Subsurface Oxygen Species in Platinum Alloy Catalysts Enable Durable Fuel Cells

Alleviating the degradation issue of Pt based alloy catalysts, thereby simultaneously achieving high mass activity and high durability in proton exchange membrane fuel cells (PEMFCs), is highly challenging. Herein, we provide a new paradigm to address this issue via delaying the place exchange between adsorbed oxygen species and surface Pt atoms, thereby inhibiting Pt dissolution, through introducing rare earth bonded subsurface oxygen atoms. We have succeeded in introducing Gd−O dipoles into Pt₃Ni via a high temperature entropy-driven process, with direct spectral evidence attained from both soft and hard X-ray absorption spectroscopies. The higher rated power of 0.93 W cm⁻² and superior current density of 562.2 mA cm⁻² at 0.8 V than DOE target for heavy-duty vehicles in H₂-air mode suggest the great potential of Gd−O−Pt₃Ni towards practical application in heavy-duty transportation. Moreover, the mass activity retention (1.04 A mg_Pt⁻¹) after 40 k cycles accelerated durability tests is even 2.4 times of the initial mass activity goal for DOE 2025 (0.44 A mg_Pt⁻¹), due to the weakened Pt−O_ads bond interaction and the delayed place exchange process, via repulsive forces between surface O atoms and those in the sublayer. This work addresses the critical roadblocks to the widespread adoption of PEMFCs.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

通过载体提高燃料电池催化剂的稳定性

Pt/C是目前质子交换膜燃料电池使用最广泛的一种催化剂,制约其实际应用的关键技术之一是稳定性,增强燃料电池催化剂稳定性研究一直是该领域的热点. 本文结合作者课题组的研究工作,综述了通过改进载体材料来提高Pt基催化剂稳定性的一些方法,指出采用更稳定的载体材料以及发展与金属催化剂纳米颗粒有强相互作用的载体材料,是增强催化剂稳定性的努力方向.     

Durable High-Temperature Proton Exchange Membrane Fuel Cells Enabled by the Working-Temperature-Matching Palladium-Hydrogen Buffer Layer

The durability degradation during stack-operating conditions seriously deteriorates the lifetime and performance of the fuel cell. To alleviate the rapid potential rise and performance degradation, an anode design is proposed to match the working temperature of high-temperature proton exchange membrane fuel cells (HT-PEMFCs) with the release temperature of hydrogen from palladium. The result is significantly enhanced hydrogen oxidation reaction (HOR) activity of Pd and superior performance of the Pd anode. Furthermore, Pd as hydrogen buffer and oxygen absorbent layer in the anode can provide additional in situ hydrogen and absorb infiltrated oxygen during local fuel starvation to maintain HOR and suppress reverse-current degradation. Compared with the traditional Pt/C anode, the Pd/C also greatly improved HT-PEMFCs durability during start-up/shut-down and current mutation. The storage/release of hydrogen provides innovative guidance for improving the durability of PEMFCs.     

Pt–Ru electrocatalysts for fuel cells: developments in the last decade

Reviewed herein are recent advances in the synthesis and performance of Pt–Ru electrocatalysts, including core–shell-like, for anodes in direct methanol fuel cells (DMFC) and in polymer electrolyte fuel cells (PEMFCs) employing reformate gas. Model systems allowing for a better understanding of composition–property and structure–property relationships, in particular of their CO-tolerance and degradation mechanisms, as well as opportunities for innovative syntheses, support optimization, and durability improvements are discussed. Some other new electrocatalysts for DMFC and PEMFC anodes are compared with Pt–Ru systems.     

Recent Development of Anion Exchange Membrane Fuel Cells and Performance Optimization Strategies: A Review

Anion exchange membrane fuel cells (AEMFCs) are the most promising low-temperature fuel cells and have received extensive attention. Compared to PEMFCs, the cost per unit of power can be significantly reduced for AEMFCs because, in theory, they allow the usage of non-precious metal catalysts and low-cost cell components. Owing to the development of advanced materials and performance improvement strategies, AEMFCs have achieved new records in both initial performance and durability. However, the high performance currently achieved is contingent on certain conditions, e. g., high Pt loading, large gas flowrates, and operation in pure O₂, which are far from practical applications. Therefore, the transition to commercially relevant performance and durability is the next goal of AEMFCs. This paper reviews the performance data of H₂-fueled AEMFCs since 2010 and summarizes possible performance optimization schemes, which can provide useful insights for developing next-generation AEMFCs.     

The challenges in reliable determination of degradation rates and lifetime in polymer electrolyte membrane fuel cells

The durability of polymer electrolyte membrane fuel cells (PEMFCs) needs to be further improved to cope with application requirements and economic competitiveness. This article highlights the challenges in the reliable determination of degradation rates and lifetime. The reliable evaluation of performance degradation rates is fundamental to quantify and benchmark durability and to allow comparisons between PEMFC durability tests performed using different materials or in different laboratories. The use of efficient recovery procedures enables the discrimination of reversible and irreversible voltage losses and facilitates the understanding of recovery mechanisms. In the end, recent contributions about lifetime diagnoses and prediction are presented, which are promising to be implemented in PEMFC applications.     

Electric vehicles,hybrid electric vehicles and fuel cell electric vehicles : state of the art and perspectives

In urban areas, due to their beneficial effects on the environment, electric vehicles, hybrid electric vehicles and fuel cell electric vehicles are an important factor for the improvement of traffic and more particularly for a healthier environment. We are quite rapidly reaching the end of the cheap oil era. This could happen around 2010 and is nowadays probably indicated by the steadily growing oil price. Therefore the need for alternative energy sources is growing and the competitiveness of alternatives against oil is becoming more and more realistic. Electric vehicles, hybrid electric vehicles and fuel cell electric vehicles are offering the best possibility for the use of new energy sources, because electricity can result from a transformation with high efficiency of these sources and is always used with the highest possible efficiency in systems with electric drives or components. Some basic considerations about the situation, today and in a mid and long-term perspective, are presented together with the infrastructure developments.     

Migration and Precipitation of Platinum in Anion-Exchange Membrane Fuel Cells

Despite the recent progress in increasing the power generation of Anion-exchange membrane fuel cells (AEMFCs), their durability is still far lower than that of Proton exchange membrane fuel cells (PEMFCs). Using the complementary techniques of X-ray micro-computed tomography (CT), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) spectroscopy, we have identified Pt ion migration as an important factor to explain the decay in performance of AEMFCs. In alkaline media Pt⁺² ions are easily formed which then either undergo dissolution into the carbon support or migrate to the membrane. In contrast to PEMFCs, where hydrogen cross over reduces the ions forming a vertical “Pt line” within the membrane, the ions in the AEM are trapped by charged groups within the membrane, leading to disintegration of the membrane and failure. Diffusion of the metal components is still observed when the Pt/C of the cathode is substituted with a FeCo−N−C catalyst, but in this case the Fe and Co ions are not trapped within the membrane, but rather migrate into the anode, thereby increasing the stability of the membrane.     

Current challenges related to the deployment of shape-controlled Pt alloy oxygen reduction reaction nanocatalysts into low Pt-loaded cathode layers of proton exchange membrane fuel cells

The reduction of the amount of platinum used in proton exchange membrane fuel cell cathodes at constant power density helps lower the cell stack cost of fuel cell electric vehicles. Recent screening studies using the thin film rotating disk electrode technique have identified an ever-growing number of Pt-based nanocatalysts with oxygen reduction reaction Pt-mass activities that allow for a substantial projected decrease in the geometric platinum loading at the cathode layer. However, the step from a rotating disk electrode test to a membrane electrode assembly test has proved a formidable task. The deployment of advanced, often shape-controlled dealloyed Pt alloy nanocatalysts in actual cathode layers of proton exchange membrane fuel cells has remained extremely challenging with respect to their actual catalytic activity under hydrogen/oxygen flow, their hydrogen/air performance at high current densities, and their morphological stability under prolonged fuel cell operations. In this review, we discuss some of these challenges, yet also propose possible solutions to understand the challenges and to eventually unfold the full potential of advanced Pt-based alloy oxygen reduction reaction catalysts in fuel cell electrode layers.