First-principles study of the electronic structure and optical properties of cubic Perovskite NaMgF_3

The structural, electronic, and optical properties of cubic perovskite NaMgF3 are calculated by plane-wave pseudopo- tential density functional theory. The calculated lattice constant a0, bulk modulus B0, and the derivative of bulk modulus B~ are 3.872/~, 78.2 GPa, and 3.97, respectively. The results are in good agreement with the available experimental and theo- retical values. The electronic structure shows that cubic NaMgF3 is an indirect insulator with a wide forbidden band gap of Eg = 5.90 eV. The contribution of the different bands is analyzed by total and partial density of states curves. Population analysis of NaMgF3 indicates that there is strong ionic bonding in the MgF2 unit, and a mixture of ionic and weak covalent bonding in the NaF unit. Calculations of dielectric function, absorption coefficient, refractive index, electronic energy loss spectroscopy, optical reflectivity, and conductivity are also performed in the energy range 0 to 70 eV.     

Electronic and Optical Properties of Rock-Salt AIN under High Pressure via First-Principles Analysis

Electronic and optical properties of rock-salt AIN under high pressure are investigated by first -principles method based on the plane-wave basis set. Analysis of band structures suggests that the rock-salt AIN has an indirect gap of 4.53 eV, which is in good agreement with other results. By investigating the effects of pressure on the energy gap, the different movement of conduction band at X point below and above 22.5 GPa is predicted. The optical properties including dielectric function, absorption, reflectivity, and refractive index are also calculated and analyzed. It is found that the rock-salt AIN is transparent from the partially ultra-violet to the visible light area and hardly does the transparence affected by the pressure. Furthermore, the curve of optical spectrum will shift to high energy area （blue shift） with increasing pressure.     

Structural, electronic, and optical properties of ZnOl_xSex alloys using first-principles calculations

The structural, electronic, and optical properties of binary ZnO, ZnSe compounds, and their ternary ZnOl_xSex alloys are computed using the accurate full potential linearized augmented plane wave plus local orbital （FP-LAPW ＋ lo） method in the rocksalt （B 1） and zincblende （B3） crystallographic phases. The electronic band structures, fundamental energy band gaps, and densities of states for ZnO1_xSex are evaluated in the range 0 〈 x 〈 1 using Wu-Cohen （WC） generalized gradient approximation （GGA） for the exchange-correlation potential. Our calculated results of lattice parameters and bulk modulus reveal a nonlinear variation for pseudo-binary and their ternary alloys in both phases and show a considerable deviation from Vegard＇s law. It is observed that the predicted lattice parameter and bulk modulus are in good agreement with the available experimental and theoretical data. We establish that the composition dependence of band gap is semi-metallic in B1 phase, while a direct band gap is observed in B3 phase. The calculated density of states is described by taking into account the contribution of Zn 3d, O 2p, and Se 4s, and the optical properties are studied in terms of dielectric functions, refractive index, reflectivity, and energy loss function for the B3 phase and are compared with the available experimental data.     

First-principles study of the structural,elastic, and optical properties for Sr0.5Ca0.5TiO3

A detailed theoretical study of the structural, elastic, and optical properties for Sr0.5Ca0.5TiO3 is carried out by first- principles calculations. The band structure exhibits a direct bandgap of 2.08 eV at the F point in the Brillouin zone. The bulk modulus, shear modulus, Young＇s modulus, and Poisson＇s ratio are derived based on the calculated elastic constants. The bulk modulus B = 153 GPa and shear modulus G = 81GPa are in good agreement with available experimental data. Poisson＇s ratio v = 0.275 suggests that Sr0.sCa0.sTiO3 should be classified as being a ductile material. Using the electronic band structure and density of states, we analyze the interband contribution to the optical properties. The real and imaginary parts of the dielectric function, as well as the optical properties such as the optical absorption coefficient, refractive index, extinction coefficient, and energy-loss spectrum are calculated. The static dielectric constant ε1 （0） and the refractive index n（0） are also investigated.     

First-principles calculations of structural,electronic, and thermodynamic properties of ZnO_(1-x)S_x alloys

In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.     

Electronic structures and optical properties of IIIA-doped wurtzite Mg0.25Zn0.75O

The energy band structures, density of states, and optical properties of IliA-doped wurtzite Mg0.25Zn0.75O （IIIA= A1, Ga, In） are investigated by a first-principles method based on the density functional theory. The calculated results show that the optical bandgaps of Mg0.25Zn0.75O：IIIA are larger than those of Mg0.25Zn0.75O because of the Burstein-Moss effect and the bandgap renormalization effect. The electron effective mass values of Mg0.25Zn0.75O：IIIA are heavier than those of Mgo.25Zno.750, which is in agreement with the previous experimental result. The formation energies of MgZnO：Al and MgZnO：Ga are smaller than that of MgZnO：In, while their optical bandgaps are larger, so MgZnO：Al and MgZnO：Ga are suitable to be fabricated and used as transparent conductive oxide films in the ultra-violet （UV） and deep UV optoelectronic devices.     

First-Principles Study on Electronic Structure and Half-Metallic Properties of CoNCN and NiNCN

We studied the electronic structure of the two new transition-metal carbodiimides CoNCN and NiNCN using first-principles method, which is based on density-functional theory （DFT）. The density of states （DOS）, the total energy of the cell and the spin magnetic moment of CoNCN and NiNCN were calculated. The calculations reveal that the compound CoNCN and NiNCN have hall-metallic properties in ferromagnetic ground state, and the spin magnetic moment per molecule is about 7.000 μB and 6.000 μB for CoNCN and NiNCN, respectively.     

First-Principles Study of Structural,Elastic and Electronic Properties of OsSi

First-principles study of structural, elastic, and electronic properties of the B20 structure OsSi has been reported using the plane-wave pseudopotential density functional theory method. The calculated equilibrium lattice and elastic constants are in good agreement with the experimented data and other theoretical results. The dependence of the elastic constants, the aggregate elastic modulus, the deviation from the Cauchy relation, the elastic wave velocities in different directions and the elastic anisotropy on pressure have been obtained and discussed. This could be the first quantitative theoretical prediction of the elastic properties under high pressure of OsSi compound. Moreover, the electronic structure calculations show that OsSi is a degenerate semiconductor with the gap value of 0.68 eV, which is higher than the experimental value of 0.26 eV. The analysis of the PDOS reveals that hybridization between Os d and Sip states indicates a certain covalency of the Os-Si bonds.     

N vacancy,substitutional O,and AI defects in the bandgap of composition-tunable nonstoichiometric AIN powder

AlN powders are prepared by direct nitridation via Al liquid and vapor phases in mixed atmospheres of N2 and NH3 with different NH3/N2 ratios. The reaction analysis reveals that NH3 acts as catalyst for N2 dissociation and the transportations of N, O, and Al in the liquid phase are different from those in the vapor phase. Accordingly, the products are Al-rich and composition-tunable nonstoichiometric AlN in which N, O, and Al content values change with nitridation atmosphere and temperature, leading to the variation of the relevant defect concentration. Therefore, the AlN powders exhibit prominent absorption bands around 5.30, 3.40, and 1.50 eV, which are tentatively assigned to VN, ON donors, and AlN acceptor respectively. Furthermore, a new donor named [VN-ON] complex is predicted at 4.40 eV within the 5.90 eV bandgap. It is demonstrated that the optical spectra of nonstoichiometric AlN are preferable to the nominal stoichimometric one for the identification of the defects energy level.     

Elastic and Thermodynamic Properties of CdSe from First-Principles Calculations

The lattice parameters, bulk modulus, phase transition pressure, and temperature dependencies of the elastic constants cij of CdSe are investigated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of Density Functional Theory （DFT）. It is found that the phase transitions from the ZB structure to the RS structure and from WZ structure to RS structure are 2.2 GPa and 2.8 GPa, respectively. Our results agree well with the available experimental data and other theoretical results. The aggregate elastic modulus （B, G, E, A ）, the Poisson＇s ratio （v）, the Griuneisen parameter （γ）, the Debye temperature θD on pressure and temperature are also successfully obtained.     

Electronic structures and thermoelectric properties of solid solutions CuGa_(1-x) In_xTe_2 : A first-principles study

The electronic structures of solid solutions CuGal_xlnxTe2 are systematically investigated using the full-potential all-electron linearized augmented plane wave method. The calculated lattice parameters almost linearly increase with the increase of the In composition, which are in good agreement with the available experimental results. The calculated band structures with the modified Becke-Johnson potential show that all solid solutions are direct gap conductors. The band gap decreases linearly with In composition increasing. Based on the electronic structure calculated, we investigate the thermoelectric properties by the semi-classical Boltzmann transport theory. The results suggest that when Ga is replaced by In, the bipolar effect of Seebeck coefficient S becomes very obvious. The Seebeck coefficient even changes its sign from positive to negative for p-type doping at low carrier concentrations. The optimal p-type doping concentrations have been estimated based on the predicted maximum values of the power factor divided by the scattering time.     

First-principles calculations of electronic and magnetic properties of CeN： The LDA ＋ U method

Electronic and magnetic properties of CeN are investigated using first-principles calculations based on density func- tional theory （DFT） with the LDA ＋ U method. Our results show that CeN is a half-metal. The majority-spin electron band structure has metallic intersections, whereas the minority-spin electron band structure has a semiconducting gap straddling the Fermi level. A small indirect energy gap occurs between X and W. The calculated magnetic moment is 0.99 μb per unit cell.     

Effect of Cr,Mo, and Nb additions on intergranular cohesion of ferritic stainless steel: First-principles determination

Effects of Cr, Mo, and Nb on the ferritic stainless steel ]2（210） grain boundary and intragranularity are investigated using the first-principles principle. Different positions of solute atoms are considered. Structural stability is lowered by Cr doping and enhanced by Mo and Nb doping. A ranking on the effect of solute atoms enhancing the cohesive strength of the grain boundary, from the strongest to the weakest is Cr, Mo, and Nb. Cr clearly prefers to locate in the intragranular region of Fe rather than in the grain boundary, while Mo and Nb tend to segregate to the grain boundary. Solute Mo and Nb atoms possess a strong driving force for segregation to the grain boundary from the intragranular region, which increases the grain boundary embrittlement. For Mo- and Nb-doped systems, a remarkable quantity of electrons accumulate in the region close to Mo （Nb）. Therefore, the bond strength may increase. With Cr, Mo, and Nb additions, an anti-parallel island is formed around the center of the grain boundary.     

Homogeneity analysis of sculptured thin films deposited in symmetric style through glancing angle deposition technique

The symmetric deposition technique is often used to improve the uniformity of sculptured thin film （STF）. In this paper, optical properties of STF with the columnar angles 4-/3 are analyzed theoretically, based on the characteristic matrix method for extraordinary waves. Then, the transmittances of uniformity monolayer and bilayer STF in symmetrical style are calculated to show the effect of the bilayer structure on the optical properties of STF. The inhomogeneity of STF is involved in analyzing the differences in transmittance and phase retardation between monolayer and bilayer STF deposited in symmetric style. The results show that optical homogeneity of STF can be improved by depositing in symmetric style at the normal incidence, but it is not the same case as the oblique incidence.     

The design and preparation of a Fabry-Perot polarizing filter

A novel single-cavity narrowband Fabry-Perot （FP） polarizing filter at normal incidence, constructed from a sandwich structure with sculptured anisotropic space layer and symmetric isotropic HR mirrors, is designed and prepared. The optical performances of transmittance, phase shift, central wavelength, and bandwidth for two polarized states are analyzed with the characteristic matrix. The numerical studies accord reasonably well with the experimental results. It is demonstrated that the polarization state of the electromagnetic wave and phase shift can be modulated by employing an anisotropic space layer in the polarizing beam splitter system. The birefringence of the anisotropic space layer provides a sophisticated phase modulation by varying the incidence angles over a broad range to have a wide-angle phase shift.     

Unidirectional emissions from dielectric photonic circuits decorated with plasmonic phased antenna arrays

Thanks to resonant characteristics of metallic nanoparticles, optical waves scattered from plasmonic nanoantennae can be well tailored in both amplitude and phase. We numerically demonstrate that, by varying the lengths and the lateral positions of gold nanorods in vicinity of a silicon waveguide, unidirectional emissions with typical forward-backward contrast ratio of 15 dB and directivity of 12 dB can be acquired in a plasmonic phased antenna array with sub-wavelength device length. The properties, i.e., the emission directionality and the size compactness, can be employed to control the far-field radiation pattern from a dielectric photonic circuit. Moreover, by altering the orientations of the dielectric waveguides decorated with plasmonic phased antenna arrays, we propose wireless light transportations in a layered photonic infrastructure, which may have applications in high-density photonic integrations.     

Rational doping for zinc oxide and its influences on morphology and optical properties

Zinc oxide(ZnO) nanopowders doped with different metal ions(Me, Me = Sn4+, In3+, Mn2+, and Co2+) are prepared by a simple sol–gel method. Influences of the ion doping on morphology and optical properties of the resulting ZnxMeyO are investigated by scanning electron microscopy, X-ray diffraction, UV-vis absorption spectrum, and photoluminescence. The morphology of ZnO can be tailored by ion doping, which is closely related not only to the ionic radii and electronegativities of the doped ions, but also to their oxidation states and electron configurations. The optical band gap and photoluminescence of ZnO can also be modulated by ion doping, which results from a combination of different effects, Burstein–Moss, band tail, charge compensation, sp–d exchange, non-radiative recombination, and blocking barrier. This may offer us a viable approach to tuning the(optical) properties of ZnO-based materials via rational ion doping.     

Influences of anionic and cationic dopants on the morphology and optical properties of PbS nanostructures

Selenium and zinc are used as anionic and cationic dopant elements to dope PbS nanostructures. The undoped and doped PbS nanostructures are grown using a thermal evaporation method. Scanning electron microscopy （SEM） results show similar morphologies for the undoped and doped PbS nanostructures. X-ray diffraction （XRD） patterns of three sets of the nanostructures indicate that these nanostructures each have a PbS structure with a cubic phase. Evidence of dopant incorporation is demonstrated by X-ray photoelectron spectroscopy （XPS）. Raman spectra of the synthesized samples con- firm the XRD results and indicate five Raman active modes, which relate to the PbS cubic phase for all the nanostructures. Room temperature photoluminescence （PL） and UV-Vis spectrometers are used to study optical properties of the undoped and doped PbS nanostructures. Optical characterization shows that emission and absorption peaks are in the infrared （IR） region of the electromagnetic spectrum for all PbS nanostructures. In addition, the optical studies of the doped PbS nanos- tructures reveal that the band gap of the Se-doped PbS is smaller, and the band gap of the Zn-doped PbS is bigger than the band gap of the undoped PbS nanostructures.     

Structural,electronic,optical,elastic properties and Born effective charges of monoclinic HfO_2 from first-principles calculations

First-principles calculations of structural, electronic, optical, elastic, mechanical properties, and Born effective charges of monoclinic HfO2 are performed with the plane-wave pseudopotential technique based on the density-functional theory. The calculated structural properties are consistent with the previous theoretical and experimental results. The electronic structure reveals that monoclinic HfO2 has an indirect band gap. The analyses of density of states and Mulliken charges show mainly covalent nature in Hf-O bonds. Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function, and optical conductivity each as a function of photon energy are calculated and show an optical anisotropy. Moreover, the independent elastic constants, bulk modulus, shear modulus, Young＇s modulus, Poisson＇s ratio, compressibility, Lam6 constant, sound velocity, Debye temperature, and Born effective charges of monoclinic HfO2 are obtained, which may help to understand monoclinic HfO2 for future work.     

Effect of high-temperature annealing on AIN thin film grown by metalorganic chemical vapor deposition

The effect of high-temperature annealing on A1N thin film grown by metalorganic chemical vapor deposition was investigated using atomic force microscopy, Raman spectroscopy, and deep ultra-violet photoluminescence （PL） with the excitation wavelength as short as ~ 177 nm. Annealing experiments were carded out in either N2 or vacuum atmosphere with the annealing temperature ranging from 1200 ℃ to 1600 ℃. It is found that surface roughness reduced and compres- sive strain increased with the annealing temperature increasing in both annealing atmospheres. As to optical properties, a band-edge emission peak at 6.036 eV and a very broad emission band peaking at about 4.7 eV were observed in the photoluminescence spectrum of the as-grown sample. After annealing, the intensity of the band-edge emission peak varied with the annealing temperature and atmosphere. It is also found that a much stronger emission band ranging from 2.5 eV to 4.2 eV is superimposed on the original spectra by annealing in either N2 or vacuum atmosphere. We attribute these deep-level emission peaks to the VAL--ON complex in the A1N material.