Electrocatalysis at graphite and carbon nanotube modified electrodes: edge-plane sites and tube ends are the reactive sites

Carbon, and particularly graphite in its various forms, is an attractive electrode material. Two areas of particular interest are modified carbon electrodes and carbon nanotube electrodes. In this article we focus on the relationship between surface structure and electrochemical and chemical reactivity of electrodes based on these materials. We overview recent work in this area which has led us to believe that much of the catalytic activity, electron transfer and chemical reactivity of graphitic carbon electrodes is at surface defect sites, and in particular edge-plane-like defect sites. We also question the claimed special "catalytic" properties of carbon nanotube modified electrodes.     

The Electrocatalytic Properties of Arc‐MWCNTs and Associated ‘Carbon Onions’

For the first time we report on the electrochemical characteristics of nanometer sized polyhedral graphite onions dispersed amongst arc‐MWCNTs. These are formed during the electric arc discharge method of producing ultrapure MWCNTs (arc‐MWCNTs). The carbon onions are randomly dispersed amongst the arc‐MWCNTs which are produced with very little amorphous carbon deposits or other unwanted impurities and are formed as closed‐ended tubes. By comparison with commercially available open‐ended hollow‐tube multiwalled carbon nanotubes made using the chemical vapor deposition method (cvd‐MWCNTs), a glassy carbon electrode (GCE), an edge‐plane pyrolytic graphite electrode (eppg) and basal plane pyrolytic graphite (bppg) electrode, we can speculate that it is the edge‐plane‐like defect sites that are the electroactive sites responsible for the apparent ‘electrocatalysis’ seen with a wide range of analytes including: ferrocyanide, ruthenium hexaamine(III), nicotinamide adenosine dinucleotide (NADH), epinephrine, norepinephrine, cysteine, and glutathione. The arc‐MWCNTs themselves are produced as closed‐ended tubes with very few, if any, edge‐plane‐like defect sites evident in their HRTEM characterization. Therefore we speculate that it is the carbon onions dispersed amongst the arc‐MWCNTs which have incomplete graphite shells or a rolled‐up ‘Swiss‐roll’ structures that posses the edge‐plane‐like defect sites and are responsible for the observed voltammetric responses. Carbon onions are no more or no less ‘electrocatalytic’ than open‐ended MWCNTs which in turn are no more electrocatalytic than an eppg electrode. As the carbon onions are ubiquitous in MWCNTs formed using the arc‐discharge method the authors advise that caution should be taken before assigning any electrocatalytic behavior to the MWCNTs themselves as any observed electrocatalysis likely arises from the carbon onion impurities.     

Demonstration of the advantages of using bamboo-like nanotubes for electrochemical biosensor applications compared with single walled carbon nanotubes

The modification of glassy carbon electrodes with random dispersions of nanotubes is currently the most popular approach to the preparation of carbon nanotube modified electrodes. The performance of glassy carbon electrodes modified with a random dispersion of bamboo type carbon nanotubes was compared with single walled carbon nanotubes modified glassy carbon electrodes and bare glassy carbon electrodes. The electrochemical performance of all three types for electrode were compared by investigating the electrochemistry with solution species and the oxidation of guanine and adenine bases of surface adsorbed DNA. The presence of edge planes of graphene at regular intervals along the walls of the bamboo nanotubes resulted in superior electrochemical performance relative to SWNT modified electrodes from two aspects. Firstly, with solution species the peak separation of the oxidation and reduction waves were smaller indicating more rapid rates of electron transfer. Secondly, a greater number of electroactive sites along the walls of the bamboo-carbon nanotubes (BCNTs) resulted in larger current signals and a broader dynamic range for the oxidation of DNA bases.     

Electrochemical synthesis of gold nanoparticles on the surface of multi-walled carbon nanotubes with glassy carbon electrode and their application

Gold nanoparticles on the surface of multi-walled carbon nanotubes with glassy carbon electrode were prepared using electrochemical synthesis method. The thin films of gold Nanoparticles/multi-walled carbon nanotubes were characterized by scanning electron microscopy, powder X-ray diffraction, and cyclic voltammetry. Electrochemical behavior of adrenaline hydrochloride at gold nanoparticles/multi-walled carbon nanotube modified glassy carbon electrode was investigated. A simple, sensitive, and inexpensive method for determination of adrenaline hydrochloride was proposed.     

纳米氧化铜-碳纳米管修饰玻碳电极同时检测邻、对苯二酚

以商品化纳米氧化铜和羧化碳纳米管作为玻碳电极修饰材料,结合了两种材料的放大电信号和电催化性能,所构建的复合物修饰电极可区分性质相近的同分异构体邻苯二酚和对苯二酚的信号,同时可进一步放大两种酚的峰电流。 因此该基于纳米氧化铜和碳纳米管的电化学传感器可用于邻苯二酚和对苯二酚的同时检测。 采用循环伏安法对复合物中两种材料的比例、修饰量以及支持电解质pH进行了优化:纳米氧化铜和碳纳米管质量比为5∶1,修饰量为9 μL,pH=7.4的磷酸盐缓冲溶液被用作电解质溶液。 在优化的条件下,邻苯二酚和对苯二酚的微分脉冲伏安扫描峰电流与浓度在6.0×10^-7~3.0×10^-3 mol/L范围内均呈良好的线性关系,检出限(S/N=3)分别为1.0×10^-7和1.6×10^-7 mol/L。 该方法具有成本低、操作简便、快速的特点,对实际水样的加标回收率在94.6%~101.1%范围内,具有较好的实际应用前景。     

Exploring the electrocatalytic sites of carbon nanotubes for NADH detection: an edge plane pyrolytic graphite electrode study

The electrocatalytic properties of multi-walled carbon nanotube modified electrodes toward the oxidation of NADH are critically evaluated. Carbon nanotube modified electrodes are examined and compared with boron-doped diamond and glassy carbon electrodes, and most importantly, edge plane and basal pyrolytic graphite electrodes. It is found that CNT modified electrodes are no more reactive than edge plane pyrolytic graphite electrodes with the comparison with edge plane and basal plane pyrolytic graphite electrodes allowing the electroactive sites for the electrochemical oxidation of NADH to be unambiguously determined as due to edge plane sites. Using these highly reactive edge plane sites, edge plane pyrolytic graphite electrodes are examined with cyclic voltammetry and amperometry for the electroanalytical determination of NADH. It is demonstrated that a detection limit of 5 microM is possible with cyclic voltammetry or 0.3 microM using amperometry suggesting that edge plane pyrolytic graphite electrodes can conveniently replace carbon nanotube modified glassy carbon electrodes for biosensing applications with the relative advantages of reactivity, cost and simplicity of preparation. We advocate the routine use of edge plane and basal plane pyrolytic graphite electrodes in studies utilising carbon nanotubes particularly if 'electrocatalytic' properties are claimed for the latter.     

3,4,9,10-Perylene Tetracarboxylic Acid Noncovalently Modified Multiwalled Carbon Nanotubes: Synthesis,Characterization, and Application for Electrochemical Determination of 2-Aminonaphthalene

Carbon nanotubes have been intensively studied for their diverse applications but are insoluble in water. In this paper, 3,4,9,10-perylene tetracarboxylic acid noncovalently modified multiwalled carbon nanotubes were prepared by a facile approach and applied successfully for electrochemical determination of 2-aminonaphthalene. Infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and electrochemical methods were used to characterize the hybridized nanotubes. The results reveal that the hybrids exhibit high dispersibility in water, and a glassy carbon electrode modified by the hybrids displayed a higher electrochemical response toward 2-aminonaphthalene than bare glassy carbon and multiwalled carbon nanotube–glassy carbon electrodes with a linear dynamic range of 15.0–500.0 nM and a detection limit of 4.5 nM. The modified hybrid electrode was successfully applied for the determination of 2-aminonaphthalene in water.     

Nicotinamide Adenine Dinucleotide Oxidation Studies at Multiwalled Carbon Nanotube/Polymer Composite Modified Glassy Carbon Electrodes

NADH oxidation has previously been investigated at carbon nanotube surfaces, although studies into the effect of the polymer binders are needed to fully understand whether the polymer binder affects the electrochemistry. This work details NADH oxidation at glassy carbon electrodes modified with composites containing multiwalled carbon nanotubes and selected polymer binders. NADH is shown to be oxidized at a lower potential than at glassy carbon electrodes and the oxidation potential is a function of the polymer binder. Hydrophobically modified Nafion, Nafion, linear poly(ethylenimine) (LPEI), octyl‐modified LPEI, and poly(vinylpyridine) binders were studied. Experiments showed the peak current and electrochemically assessible electrode area are dependent on the polymer binder. Overall, this paper shows that polymer binders affect NADH oxidation potential at carbon nanotube modified electrodes.     

Bi‐Directional Electrocatalytic Detection of Dopamine at an Electrode Modified with Ferrocene‐Filled Carbon Nanotube Peapods

A glassy carbon electrode (GCE) was modified with nanopeapods formed by ferrocene filled single‐walled carbon nanotubes (Fc@SWNTs). The modified electrode showed bi‐directional electrocatalysis toward dopamine (DA), which suggested a synergistic effect of ferrocene and carbon nanotubes. Bi‐directional detection of DA was realized based on the modified electrode.     

The effects of the lengths and orientations of single-walled carbon nanotubes on the electrochemistry of nanotube-modified electrodes

The influence of both nanotube orientation and length on the electrochemical properties of electrodes modified with single-walled carbon nanotubes was investigated. Gold electrodes were modified with either randomly dispersed or vertically aligned nanotubes to which ferrocenemethylamine was attached. Electron transfer kinetics were found to depend strongly on the orientation of the nanotube, with electron transfer between the gold electrode and the ferrocene moiety being 40 times slower through randomly dispersed nanotubes than through vertically aligned nanotubes. The difference is hypothesized to be due to electron transfer being more direct through a single tube than that with electrodes modified with randomly dispersed nanotubes. With the vertically aligned nanotubes the rate constant for electron transfer varied inversely with the mean length of the nanotubes. The results indicate there is an advantage in using aligned carbon nanotube arrays over randomly dispersed nanotubes for achieving efficient electron transfer to bound redox active species such as in the case of bioelectronic or photovoltaic devices.     

Construction of an electrochemical sensor based on the electrodeposition of Au-Pt nanoparticles mixtures on multi-walled carbon nanotubes film for voltammetric determination of cefotaxime

Mixtures of gold-platinum nanoparticles (Au-PtNPs) are fabricated consecutively on a multi-walled carbon nanotubes (MWNT) coated glassy carbon electrode (GCE) by the electrodeposition method. The surface morphology and nature of the hybrid film (Au-PtNPs/MWCNT) deposited on glassy carbon electrodes is characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques. The modified electrode is used as a new and sensitive electrochemical sensor for the voltammetric determination of cefotaxime (CFX). The electrochemical behavior of CFX is investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable improvement in the oxidation peak current of CFX compared to glassy carbon electrodes individually coated with MWCNT or Au-PtNPs. Under the optimized conditions, the modified electrode showed a wide linear dynamic range of 0.004-10.0 μM with a detection limit of 1.0 nM for the voltammetric determination of CFX. The modified electrode was successfully applied for the accurate determination of trace amounts of CFX in pharmaceutical and clinical preparations.     

Electrochemical reduction of oxygen on double-walled carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions

The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O₂ reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies.     

Chemically Modified Carbon Nanotubes for Use in Electroanalysis

The discovery of carbon nanotubes has had a profound impact on many areas of science and technology, not least that of electroanalysis. The properties and applications of carbon nanotubes themselves have been well reviewed in the literature and a number of reviews with an electrochemical emphasis have been published. However, the modification of carbon nanotubes has recently been the focus of much research, primarily to improve their solubility in various solvents. Yet modified carbon nanotube electrodes also allow the electrochemist to tailor the properties of the carbon nanotubes, or the electrode surface to impart desired properties such as enhanced sensing capabilities. In this review we attempt to comprehensively cover the different chemical and electrochemical modification strategies and research carried out using modified carbon nanotubes for electroanalytical and bioanalytical applications. Furthermore we also discuss the use of modified carbon nanotubes in electrocatalysis and biocatalysis from an analytical aspect, as well as seeking to dispel some of the myths surrounding the “electrocatalytic” properties of carbon nanotubes.     

Electrocatalytic reduction of NAD+ at glassy carbon electrode modified with single-walled carbon nanotubes and Ru(III) complexes

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes and Ruthenium (III) complexes. First, 25 μl of dimethyl sulfoxide–carbon nanotubes solutions (0.4 mg/ml) was cast on the surface of the glassy carbon electrode and dried in air to form a carbon nanotube film at the electrode surface. Then, the glassy carbon/carbon nanotube-modified electrode was immersed into a Ruthenium (III) complex solution (direct deposition) for a short period of time (10–20 s for multiwalled carbon nanotubes and 20–40 s for single-walled carbon nanotubes). The cyclic voltammograms of the modified electrode in aqueous solution shows a pair of well-defined, stable, and nearly reversible redox couple, Ru(III)/Ru(II), with surface-confined characteristics. The attractive mechanical and electrical characteristics of carbon nanostructures and unique properties and reactivity of Ru complexes are combined. The transfer coefficient (α), heterogeneous electron transfer rate constants (k _s), and surface concentrations (Γ) for the glassy carbon/single-walled carbon nanotubes/Ru(III) complex-, glassy carbon/multiwalled carbon nanotubes/Ru(III) complex-, and glassy carbon/Ru(III) complex-modified electrodes were calculated using the cyclic voltammetry technique. The modified electrodes showed excellent catalytic activity, fast response time, and high sensitivity toward the reduction of nicotinamide adenine dinucleotide in phosphate buffer solutions at a pH range of 4–8. The catalytic cathodic current depends on the nicotinamide adenine dinucleotide concentration. In the presence of alcohol dehydrogenase, the modified electrode exhibited a response to addition of acetaldehyde. Therefore, the main product of nicotinamide adenine dinucleotide electroreduction at the Ru(III) complex/carbon nanotube-modified electrode was the enzymatically active NADH. The purposed sensor can be used for acetaldehyde determination.     

The Heterogeneity of Multiwalled and Single‐Walled Carbon Nanotubes: Iron Oxide Impurities Can Catalyze the Electrochemical Oxidation of Glucose

It is well established that the heterogeneity of carbon nanotubes must be determined before the origin of the electrochemical performance can be attributed. Recently it has been diligently reported that for the case of multiwalled carbon nanotube modified electrodes, copper oxide impurities are responsible for the electrochemical activity facilitating a nonenzymatic sensing strategy towards glucose. We have explored both commercially available multiwalled and single‐walled carbon nanotubes for the sensing of glucose and find that iron oxide impurities remaining from the fabrication process are the electroactive sites facilitating the nonenzymatic detection of glucose. Given that the multiwalled carbon nanotubes in this work are purchased from the same leading supplier as that used recently, discrepancies in the fabrication process exist which clearly has implications in the commercialization of electrochemical sensors based on multiwalled carbon nanotubes.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin on Aligned Carbon Nanotubes Based Electrodes Modified with Au Nanoparticles and SiO2 Gel

Here we report on the preparation and characterization of new electrodes based on aligned carbon nanotubes (ACNTs) for hemoglobin (Hb) electrochemistry and electrocatalysis. The ACNTs are obtained by a thermal chemical vapor deposition method under normal pressure. Then the electrodes are elaborated by first sputtering a thin Au film (thickness of 200 nm) onto the top of the ACNTs, and then removing the Au layer/ACNTs from the quartz substrate with the aide of hydrofluoric acid (HF) treatment. Field emission scanning electron microscopy (FESEM) demonstrates that after nitric acid (HNO₃) treatment, the nanotubes of the removed Au layer are totally tip‐opened, purified and organized in a perfect vertically aligned architecture. The final ACNTs electrode is obtained by attaching the Au layer of ACNTs onto a glassy carbon electrode. Then the electrode was modified to act as a matrix for hemoglobin (Hb) immobilization and as an electrode for Hb electroanalysis by the assistance of Au nanoparticles (AuNPs) and SiO₂ gel. Due to the individual specific effects of AuNPs, SiO₂ gel and ACNTs, the resulting SiO₂/Hb‐AuNPs/ACNTs electrode showed good direct electrochemistry of Hb with an apparent Michaelis? Menten constant of 0.44 mM. The electrode showed an excellent electrocatalytic activity towards H₂O₂, possessing a linear range from 40 µM to 4 mM and the detection limit was 22 µM based on a signal to noise ratio of 3.     

Simplifying the evaluation of graphene modified electrode performance using rotating disk electrode voltammetry

Graphene modified electrodes have been fabricated by electrodeposition from an aqueous graphene oxide solution onto conducting Pt, Au, glassy carbon, and indium tin dioxide substrates. Detailed investigations of the electrochemistry of the [Ru(NH(3))(6)](3+/2+) and [Fe(CN)(6)](3-/4-) and hydroquinone and uric acid oxidation processes have been undertaken at glassy carbon and graphene modified glassy carbon electrodes using transient cyclic voltammetry at a stationary electrode and near steady-state voltammetry at a rotating disk electrode. Comparisons of the data with simulation suggest that the transient voltammetric characteristics at graphene modified electrodes contain a significant contribution from thin layer and surface confined processes. Consequently, interpretations based solely on mass transport by semi-infinite linear diffusion may result in incorrect conclusions on the activity of the graphene modified electrode. In contrast, steady-state voltammetry at a rotating disk electrode affords a much simpler method for the evaluation of the performance of graphene modified electrode since the relative importance of the thin layer and surface confined processes are substantially diminished and mass transport is dominated by convection. Application of the rotated electrode approach with carbon nanotube modified electrodes also should lead to simplification of data analysis in this environment.     

Designer electrode interfaces simultaneously comprising three different metal nanoparticle (Au, Ag, Pd)/carbon microsphere/carbon nanotube composites: progress towards combinatorial electrochemistry

In this report gold, silver and palladium metal nanoparticles are separately supported on glassy carbon microspheres (GCM) using bulk electroless deposition techniques to produce three different materials labelled as GCM-Au, GCM-Ag and GCM-Pd respectively. These three materials are then combined together into a composite film on a glassy carbon (GC) electrode surface using multiwalled carbon nanotubes (MWCNTs). The MWCNTs serve to not only mechanically support this composite film as a "binder" but they also help to "wire up" each modified GCM to the underlying substrate. The intelligently designed structure of this electrode interface allows this single modified electrode to simultaneously behave as if it were a macrodisc electrode constructed of gold, silver or palladium, whilst using only a fraction of the equivalent amount of these precious metals. Furthermore this unique structure allows the possibility of combinatorial electrochemistry to be realised using a relatively facile electrode construction which avoids the problems of alloy formation, co-deposition and the formation of bimetallic species. For instance a mixture of several different analytes, which can each only be detected on a different specific substrate, can simultaneously be determined using one electrode in a single voltammetric experiment! Alternatively a substrate could undergo electrocatalytic reactions on one substrate, whilst the products, and hence the progress of this reaction, can be studied at a different substrate simultaneously at the same electrode surface. Proof-of-concept examples are presented herein and the designer electrode interface is shown to produce analytical responses to model target analytes such as hydrazine, bromide and thallium(I) ions that are comparable, if not better, than those obtained at metal macrodisc electrodes and even at other state-of-the-art nanoparticle modified electrodes.     

The effect of electrocatalytic nanoparticle injection on the electrochemical response at a rotating disc electrode

A new approach to study electrocatalytic oxidation of glucose is proposed. As opposed to numerous studies on electrodes modified with gold nanoparticles this reaction was studied in their suspension of gold nanoparticles under hydrodynamic conditions on a noncatalytic glassy carbon rotating disc electrode. It has been shown that addition of nanogram amount of positively charged Au nanoparticles results in a clear current response, whereas no clear response is seen for negatively charged ones. This effect results from the electrocatalytic oxidation of glucose on Au nanoparticles mainly adsorbed on glassy carbon electrode. The role of electrode preparation method on reproducibility of the results is emphasized.     

Influence of the Electrode Material on the Electrochemical Behavior of Carbon Paste Electrodes Modified with Meldola Blue and Methylene Green Adsorbed on a Synthetic Zeolite

Carbon paste electrodes modified with a phenoxazine derivative, Meldola blue, and a phenothiazine derivative, methylene green, both strongly adsorbed on a synthetic zeolite were investigated using either glassy carbon powder (Sigradur K, SK) or single‐walled carbon nanotubes (SWCNT) as conductive electrode material. In the case of SWCNT based electrodes, the formal potential of both mediators was pH dependent, as expected for a redox process involving proton transfer. In contrast, the formal potential of both mediators of SK based modified electrodes was practically insensitive to pH. This behavior is discussed in terms of interactions existing in the heterogeneous system mediator‐zeolite‐electrode material.