Functionalization and Dissolution of Single-Walled Carbon Nanotubes by Chemical-Physical and Electrochemical Treatments

Single-Walled Carbon Nanotubes (SWCNTs) possess a wealth of exceptional structural, mechanical and electronic properties. These have made them potentially useful for applications in nanotube-reinforced materials, nanoelectronic devices, field emitters, probe tips for SPM, as well as for sensors, biosensors, and actuators. However, manipulation and processing of SWCNTs has been limited by their insolubility in most common solvents, although some dissolution has recently been obtained. Their chemical modification might pave the way to many useful applications, including the preparation of composite materials or the immobilization of biological molecules as enzymes (i.e., for biosensors and electrochemical sensors). Attachment of oxygen-containing functional groups (i.e., carboxy groups, carbonyl groups, hydroxy groups, etc.) on the surface of the carbon nanotubes could be achieved using different pretreatments of the nanostructured material. These involved (a) chemical and physical procedures; and (b) electrochemical functionalization. Different attempts at sidewall modification have been hampered by the presence of significant contaminants as graphitic and amorphous carbon or have required solubilization via chemical reactions on the ends of cut nanotubes. A more accommodating and direct approach to functionalize nanotubes is therefore required. We report here the sidewall functionalization of purified SWCNTs, obtained by different approaches and finally, we can discuss possible applications of functionalized SWCNTs in the sensing area.     

碳纳米管共价功能化*

碳纳米管由于其独特的结构与优异的各项性能,在许多领域具有巨大的应用潜力,已引起了广泛的关注。由于碳纳米管不溶于水和有机溶剂,极大地制约了其性能应用,因此碳纳米管的功能化就成为目前研究的热点。本文侧重于碳纳米管的共价功能化,详细讨论了碳纳米管不同位置共价功能化的研究进展。     

Electrochemical Sensors Based on Carbon Nanotubes

Carbon nanotubes are attractive new materials. It has been about a decade since carbon nanotubes were discovered. Carbon nanotubes have many outstanding properties and have many practical or potential applications. In this short review we introduce recent advances in carbon nanotubes as potential material for electrochemical sensors. The advantages of carbon nanotubes as sensors are discussed along with future prospects.     

Applications of nanoscale carbon-based materials in heavy metal sensing and detection

This article reviews applications of nanoscale carbon-based materials in heavy metal sensing and detection. These materials, including single-walled carbon nanotubes, multi-walled carbon nanotubes and carbon nanofibers among others, have unique and tunable properties enabling applications in various fields spanning from health, electronics and the environment sector. Specifically, we highlight the unique properties of these materials that enable their applications in the sorption and preconcentration of heavy metals ions prior to detection by spectroscopic, chromatographic and electrochemical techniques. We also discuss their distinct properties that enable them to be used as novel electrode materials in sensing and detection. The fabrication and modification of these electrodes is discussed in detail and their applications in various electrochemical techniques such as voltammetric stripping analysis, potentiometric stripping analysis, field effect transistor-based devices and electrical impedance are critically reviewed. Perspectives and futures trends in the use of these materials in heavy metal sensing and detection will also be highlighted.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Ensemble of carbon fiber ultra-microelectrodes modified with nanotubes, and its application to the determination of dopamine

An ensemble of carbon fibers ultra-microelectrode modified with carbon nanotubes (EUME-CNTS) has been constructed based on a thin carbon nanotubes film which was coated onto surfaces of carbon fibers of ultra-microelectrode. SEM micrographs illustrated the image of carbon nanotubes on the carbon fiber surface. The electrochemical characteristics of the EUME-CNTS has been investigated by cyclic voltammetry. The electrochemical properties of dopamine on this electrode were also studied, and the detection limit was found to be 2.0 × 10⁻⁹ mol·L⁻¹. Linear calibration plots were obtained for the oxidation peak current in a range 1.0 × 10⁻⁷–8.0 × 10⁻⁵ mol·L⁻¹. Correspondence: Xiuhua Liu, Kuaizhi Liu, Department of Chemistry and Chemical Engineering, Henan University, Henan Kaifeng 475001, P.R. China     

The effects of a eutectic modifier on microstructure and surface corrosion behavior of Al-Si hypoeutectic alloys

Hypoeutectic aluminum–silicon alloys can have significant improvements in mechanical properties by inducing structural modification in the normally occurring eutectic. The eutectic modification may affect not only the mechanical properties but also the corrosion resistance of such alloys. It is well known that structural parameters such as grain size and interdendritic spacing can significantly affect corrosion resistance of alloys. However, to date, few researches have been performed to experimentally evaluate the effects of an effective modification of eutectic morphology on surface corrosion behavior of Al–Si alloys. In the present study, modified and unmodified samples of an Al 9 wt.% Si alloy were solidified under similar solidification conditions, and after metallographic procedures, the corrosion resistance was analyzed by both the electrochemical impedance spectroscopy technique and the Tafel extrapolation method carried out in a 0.5 M NaCl test solution at 25 °C. The impedance parameters and corrosion rate were obtained from an equivalent circuit analysis. It was found that the Al-9 wt.% Si alloy casting in the modified condition tends to have its corrosion resistance decreased when compared to the unmodified alloy.     

Aligned Nanotubes

Since the discovery of carbon nanotubes by Iijima in 1991, various carbon nanotubes with either a single‐ or multilayered graphene cylinder(s) have been produced, along with their noncarbon counterparts (for example, inorganic and polymer nanotubes). These nanostructured materials often possess size‐dependent properties and show new phenomena related to the nanosize confinement of the charge carriers inside, which leads to the possibility of developing new materials with useful properties and advanced devices with desirable features for a wide range of applications. In particular, carbon nanotubes have been shown to exhibit superior properties attractive for various potential applications, ranging from their use as novel electron emitters in flat‐panel displays to electrodes in electrochemical sensors. For many of the applications, it is highly desirable to have aligned/patterned forms of carbon nanotubes so that their structure/property can be easily assessed and so that they can be effectively incorporated into devices. In this Review, we present an overview on the development of aligned and micropatterned nanotubes, with an emphasis on carbon nanotubes.     

Nanographite impurities in carbon nanotubes: their influence on the oxidation of insulin, nitric oxide, and extracellular thiols

There has been growing interest in the use of modified-carbon-nanotube electrodes in applications such as the electrochemical detection of biologically significant compounds, owing to their apparent "electrocatalytic" properties and ability to enhance oxidative signals. In spite of their salient properties, little work has been done to further examine the reasons for these reported characteristics. In this report, we present clear evidence that the presence of nanographite impurities within carbon nanotubes (CNTs) is responsible for providing the previously reported enhanced electrochemical response. We have demonstrated this effect on homocysteine, N-acetyl-L-cysteine, nitric oxide, and insulin, which are important biological agents in the body. Moreover, we also showed that the influence of nanographite impurities on the electrochemistry of carbon nanotubes is prevalent among a variety of CNTs, such as single-walled CNTs, double-walled CNTs, and few-walled CNTs. Our findings will have a profound influence upon the biomedical applications of CNTs.     

《碳纳米材料电化学》专辑序言 ——方兴未艾的电化学能量转换和存储先进材料和技术

可以预见,在相当一段时期内,能源和环境将是全球发展的两大主题. 其实,人类对能源的获取方式将对地球的生态环境和人类未来的生存状态和生活方式产生重要影响. 正因为如此,世界各国正在大力发展可再生能源和清洁能源. 电化学能源是将化学能高效转变为电能的一种能量转换方式,它历史悠久,但不断被改进和创新,尤其是近年来得到了较快的发展. 目前,电化学能源转换和存储器件主要包括一次电池（如锌锰电池等）、二次电池（如铅酸电池、镍氢电池、锂离子电池等）、燃料电池、金属-空气电池以及超级电容器等. 电化学能源和其它可再生能源相互补充、交叉利用将是未来清洁能源的主要发展方向.     

刺激响应纳米碳杂化材料

碳纳米管和石墨烯是碳纳米材料的典型代表,其纳米尺度赋予了其优异的光、电、热以及机械性能。然而,这些碳纳米材料间存在较强的范德华力,导致其溶解性差,后续加工处理困难。为提高碳纳米材料的溶解性,通常利用聚合物或其它小分子物质对其进行修饰。而利用刺激响应性聚合物或化合物功能化碳纳米材料,不仅可以提高其溶解性,还可以赋予其环境刺激响应功能。本文主要综述了近年来利用温度、pH、光以及CO2响应聚合物或小分子化合物对碳纳米管和石墨烯进行共价键、非共价键修饰并赋予其环境刺激响应特性的方法、功能和相关应用,展望了修饰得到的纳米碳杂化材料的应用前景及下一步发展方向。     

Electrochemical Biosensing for Cancer Cells Based on TiO2/CNT Nanocomposites Modified Electrodes

Both TiO₂ nanoparticles and carbon nanotubes have been usually utilized to modify the electrodes to enhance the detection sensitivity of biomolecular recognition. In this research, novel TiO₂/CNT nanocomposites have been prepared and doped on the carbon paper as the modified electrodes. Subsequently, the redox behavior of the ferricyanide probe and the surface properties of the cancer cells coated on the modified electrodes have been investigated by using electrochemical and contact angle measurements. Compared with electrochemical signals on bare carbon paper and nanocomposite modified substrates, the significantly enhanced electrochemical signals on the modified electrodes covered with cancer cells have been observed. Meanwhile, different leukemia cells (i.e., K562/ADM cells and K562/B.W. cells) could be also recognized because of their different electrochemical behavior and hydrophilic/hydrophobic features on the modified electrodes due to the specific components on the plasma membranes of the target cells. This new strategy may have potential application in the development of the biocompatible and multi‐signal responsive biosensors for the early diagnosis of cancers.     

Electrochemical sensors and biosensors based on redox polymer/carbon nanotube modified electrodes: A review

The aim of this review is to present the contributions to the development of electrochemical sensors and biosensors based on polyphenazine or polytriphenylmethane redox polymers together with carbon nanotubes (CNT) during recent years. Phenazine polymers have been widely used in analytical applications due to their inherent charge transport properties and electrocatalytic effects. At the same time, since the first report on a CNT-based sensor, their application in the electroanalytical chemistry field has demonstrated that the unique structure and properties of CNT are ideal for the design of electrochemical (bio)sensors. We describe here that the specific combination of phenazine/triphenylmethane polymers with CNT leads to an improved performance of the resulting sensing devices, because of their complementary electrical, electrochemical and mechanical properties, and also due to synergistic effects. The preparation of polymer/CNT modified electrodes will be presented together with their electrochemical and surface characterization, with emphasis on the contribution of each component on the overall properties of the modified electrodes. Their importance in analytical chemistry is demonstrated by the numerous applications based on polymer/CNT-driven electrocatalytic effects, and their analytical performance as (bio) sensors is discussed.     

Glassy carbon electrodes modified by multiwalled carbon nanotubes and poly(neutral red): A comparative study of different brands and application to electrocatalytic ascorbate determination

The electrochemical behaviour of glassy carbon electrodes coated with multiwalled carbon nanotubes (MWCNT) from three different sources and with different loadings has been compared, with a view to sensor applications. Additionally, poly(neutral red) (PNR) was electrosynthesised by potential cycling on bare glassy carbon and on MWCNT-modified glassy carbon electrodes, and characterised by cyclic voltammetry and scanning electron microscopy. Well-defined voltammetric responses were observed for hexacyanoferrate (II) oxidation with differences between the MWCNT types as well as from loading. The MWCNT and PNR/MWCNT-modified electrodes were applied to the oxidative determination of ascorbate, the electrocatalytic effects observed varying according to the type of nanotubes. Comparison was made with electrodes surface-modified by graphite powder. All modified electrode configurations with and without PNR were successfully employed for ascorbate oxidation at +0.05 V vs saturated calomel electrode with detection limits down to 4 μM; good operational stability and storage stability were also obtained.     

Effects of a chemically modified multiwall carbon nanotubes on electro-optical properties of PDLC films

Polymer dispersed liquid crystal (PDLC) films are fabricated by well-known polymerization-induced phase separation method. In this paper, the dispersion of multi-walled carbon nanotubes (MWCNT) in liquid crystals has been enhanced by chemical modification and we have investigated their effects on the morphology, electro-optical properties and conductivity of the PDLC films. Results indicated that the threshold voltage and the saturation voltage of PDLC films decreased with the increase of the doping concentration of MWCNT or chemically modified MWCNT, because carbon nanotubes can enhance the electric field by reducing the resistivity of the medium and increasing the capacitance of the cells. It can be viewed obviously that the contrast ratio of the PDLC films doped with the chemically modified MWCNT is higher than that of the MWCNT.     

Carbon Nanotube and Gold‐Based Materials: A Symbiosis

Carbon nanotubes constitute a novel class of nanomaterials with potential applications in many areas. The attachment of metal nanoparticles to carbon nanotubes is new way to obtain novel hybrid materials with interesting properties for various applications such as catalysts and gas sensors as well as electronic and magnetic devices. Their unique properties such as excellent electronic properties, a good chemical stability, and a large surface area make carbon nanotubes very useful as a support for gold nanoparticles in many potential applications, ranging from advanced catalytic systems through very sensitive electrochemical sensors and biosensors to highly efficient fuel cells. Here we give an overview on the recent progress in this area by exploring the various synthesis approaches and types of assemblies, in which nanotubes can be decorated with gold nanoparticles and explore the diverse applications of the resulting composites.     

3,4,9,10-Perylene Tetracarboxylic Acid Noncovalently Modified Multiwalled Carbon Nanotubes: Synthesis,Characterization, and Application for Electrochemical Determination of 2-Aminonaphthalene

Carbon nanotubes have been intensively studied for their diverse applications but are insoluble in water. In this paper, 3,4,9,10-perylene tetracarboxylic acid noncovalently modified multiwalled carbon nanotubes were prepared by a facile approach and applied successfully for electrochemical determination of 2-aminonaphthalene. Infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and electrochemical methods were used to characterize the hybridized nanotubes. The results reveal that the hybrids exhibit high dispersibility in water, and a glassy carbon electrode modified by the hybrids displayed a higher electrochemical response toward 2-aminonaphthalene than bare glassy carbon and multiwalled carbon nanotube–glassy carbon electrodes with a linear dynamic range of 15.0–500.0 nM and a detection limit of 4.5 nM. The modified hybrid electrode was successfully applied for the determination of 2-aminonaphthalene in water.     

Broadband radio-absorbing materials based on porous composites with carbon nanotubes

The reflection coefficient of an electromagnetic wave has been theoretically studied as a function of the thickness of a material and its dielectric properties. Samples based on spheroplastics with noncovalently modified carbon nanotubes have been obtained. The radio-engineering and electrophysical properties of these composites are discussed as well. The prospects for applying porous nanocomposites with carbon nanotubes in the fabrication of radio-absorbing materials are also shown.     

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites

In the present research, a multifunctional hierarchical reinforcement was prepared by chemical modification of carbon fibers (CFs) with halloysite nanotubes (HNTs) by the bridging diethylenetriaminepentaacetic acid (DTPA) for improving interfacial microstructures and properties of composites. Surface structures and groups of modified HNTs and CFs were characterized systematically. The uniform distributions of the introduced DTPA and HNTs helped to increase fiber polarity, surface energy, and wettability. As a consequence, significant enhancements of interfacial properties and hydrothermal aging resistance of composites were achieved, and interfacial reinforcing mechanisms have also been studied. Moreover, the storage modulus showed a 17.95% improvement, and the glass transition temperature was enhanced by 17°C by dynamic mechanical analysis testing.     

具有均匀壳层的纳米功能材料：构筑与应用

表面修饰是一种重要的材料处理手段,被广泛应用于催化、光化学、电化学等领域。本文阐述了通过表面均匀包覆构建具有特定功能核壳结构的意义,并分析了构筑均匀包覆层的典型合成方法。同时,针对锂离子电池电极材料这一特定应用对象,综述了进行电极材料表面均匀包覆处理的途径,强调了电极材料核壳结构的构筑对于电极材料表面稳定、电化学性能优化等意义。