Synthesis and Photochemical Evaluation of Iodinated Squarylium Cyanine Dyes

Several (multiply) iodinated squarylium cyanine dyes of type 1 and 8 (see Scheme and Table), derived from 1,3‐benzothiazole and 6‐iodo‐1,3‐benzothiazole, were synthesized as potential new photosensitizers, with absorptions in the 700‐nm region. Their ability to generate singlet oxygen (¹O₂) was assessed by luminescence‐decay measurement in the near‐IR. Some of these new dyes show interesting photophysical properties, and may be potentially used in photodynamic therapy (PDT).     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

Production of reactive oxygen species induced by a new [60]fullerene derivative bearing a tetrazole unit and its possible biological applications

The wide range of physical and chemical properties of modified fullerenes has drawn increasing attention in the past few years. As part of this research, this paper describes the preparation, characterization, and photophysical properties of a new fullerene derivative chemically modified with a tetrazole. The photophysical properties were studied by EPR radical spin-trapping technique and showed that reactive oxygen species (ROS) can be produced through UVA photosensitization. EPR spin-trapping experiments with singlet oxygen (¹O₂) and superoxide (O₂⁻) inhibitors (β-carotene and superoxide dismutase, respectively) revealed also that: (i) the main ROS produced is ¹O₂ and (ii) ¹O₂ is being partially dismutated to O₂⁻. The results suggest that this derivative can be used in biological applications, as for example, in topic photodynamic therapy (PDT) as a photosensitizer.     

Porphyrin/Platinum(II) C^N^N Acetylide Complexes: Synthesis,Photophysical Properties,and Singlet Oxygen Generation

A new class of substituted porphyrins has been developed in which a different number of cyclometalated Pt^II C^N^N acetylides and polyethylene glycol (PEG) chains are attached to the meso positions of the porphyrin core, which are meant for photophysical, electrochemical, and in vitro light‐induced singlet oxygen (¹O₂) generation studies. All of these Zn^II porphyrin–Pt^II C^N^N acetylide conjugates show moderate to high (Φ_Δ=0.55 to 0.63) singlet oxygen generation efficiency. The complexes are soluble in organic solvents but, despite the PEG substituents, slowly aggregate in aqueous solvent systems. These conjugates also exhibit interesting photophysical properties, including near‐complete photoinduced energy transfer (PEnT) through the rigid acetylenic bond(s) from the Pt^II C^N^N antenna units to the Zn^II porphyrin core, which shows sensitized luminescence, as shown by quenching of Pt^II C^N^N‐based luminescence. Electrochemical measurements show a set of redox processes that are approximately the sum of what is observed for the Pt^II C^N^N acetylide and Zn^II porphyrin units. UV/Vis spectroscopic properties are supported by DFT calculations.     

Boosting Activation of Oxygen Molecules on C60 Fullerene by Boron Doping

The activation of oxygen molecules on boron‐doped C₆₀ fullerene (C₅₉B) and the subsequent water formation reaction are systematically investigated by using hybrid density functional calculations. Results indicate that C₅₉B shows a favorable ability to activate oxygen molecules both kinetically and thermodynamically. The oxygen molecule is first adsorbed on the boron atom, which is identified to be the most reactive site in C₅₉B for O₂ adsorption because of its high positive charge and spin density. The adsorption structure C₅₉B?O₂ can further isomerize to form two products with small reaction barriers. Water formation reactions upon these two structures are energetically favorable and suggest a four‐electron mechanism for the oxygen reduction reaction catalyzed by C₅₉B. This work provides a reliable theoretical insight into the catalytic properties of boron‐doped fullerene, which is believed to be helpful to explore fullerene catalysts.     

Bacitracin‐Conjugated Superparamagnetic Iron Oxide Nanoparticles: Synthesis,Characterization and Antibacterial Activity

Bacitracin‐conjugated superparamagnetic iron oxide (Fe₃O₄) nanoparticles were prepared by click chemistry and their antibacterial activity was investigated. After functionalization with hydrophilic and biocompatible poly(acrylic acid), water‐soluble Fe₃O₄ nanoparticles were obtained. Propargylated Fe₃O₄ nanoparticles were then synthesized by carbodiimide reaction of propargylamine with the carboxyl groups on the surface of the iron oxide nanoparticles. By further reaction with N₃‐bacitracin in a Cu^I‐catalyzed azide–alkyne cycloaddition, the magnetic Fe₃O₄ nanoparticles were modified with the peptide bacitracin. The functionalized magnetic nanoparticles were characterized by powder X‐ray diffraction, X‐ray photoelectron spectroscopy, TEM, zeta‐potential analysis, FTIR spectroscopy and vibrating‐sample magnetometry. Cell cytotoxicity tests indicate that bacitracin‐conjugated Fe₃O₄ nanoparticles show very low cytotoxicity to human fibroblast cells, even at relatively high concentrations. In view of the antibacterial activity of bacitracin, the biofunctionalized Fe₃O₄ nanoparticles exhibit an antibacterial effect against both Gram‐positive and Gram‐negative organisms, which is even higher than that of bacitracin itself. The enhanced antibacterial activity of the magnetic nanocomposites allows the dosage and the side effects of the antibiotic to be reduced. Due to the antibacterial effect and magnetism, the bacitracin‐functionalized magnetic nanoparticles have potential application in magnetic‐targeting biomedical applications.     

Structural and Photosensitizing Features of Phthalocyanine—Zeolite Hybrid Nanomaterials

In this work, we have quantified for the first time the fluorescence and singlet oxygen quantum yields of a silicon(IV) phthalocyanine bound to the surface of zeolite L nanocrystals. The photophysical properties were correlated with the absorption spectra and the morphology of the nanoparticles, and most importantly, with the fraction of photoactive chromophores. By comparison with the fluorescence and singlet oxygen quantum yields of the free phthalocyaninate in dilute solution (Φ_F = 0.50 and Φ_? = 0.50, respectively), we conclude that for the most efficient nanoparticles nearly 80% of chromophores are active as monomeric units on the surface, as indicated by the corresponding quantum yields (Φ_F = 0.40 and Φ_? = 0.40). We further functionalized and raised the ζ‐potential of the best performing nanomaterial to improve its water dispersibility. The functionalization was monitored by thermogravimetric analysis and time‐of‐flight secondary‐ion mass spectrometry, and its influence on the photophysical properties was assessed. The resulting nanomaterials are capable of establishing stable suspensions in water while retaining the ability to form reactive oxygen species upon irradiation with red light. This provides a basis for the rational design of photoactive nanomaterials for photodynamic therapy or water decontamination.     

Bioluminescent Enzymatic Assay as a Tool for Studying Antioxidant Activity and Toxicity of Bioactive Compounds

A bioluminescent assay based on a system of coupled enzymatic reactions catalyzed by bacterial luciferase and NADH:FMN‐oxidoreductase was developed to monitor toxicity and antioxidant activity of bioactive compounds. The assay enables studying toxic effects at the level of biomolecules and physicochemical processes, as well as determining the toxicity of general and oxidative types. Toxic and detoxifying effects of bioactive compounds were studied. Fullerenols, perspective pharmaceutical agents, nanosized particles, water‐soluble polyhydroxylated fullerene‐60 derivatives were chosen as bioactive compounds. Two homologous fullerenols with different number and type of substituents, C₆₀O_2–4(OH)_20–24 and Fe_0.5C₆₀(OH) _xO_y (x + y = 40–42), were used. They suppressed bioluminescent intensity at concentrations >0.01 g L^?1 and >0.001 g L^?1 for C₆₀O_2–4(OH)_20‐24 and Fe_0.5C₆₀(OH)_xO_y, respectively; hence, a lower toxicity of C₆₀O_2–4(OH)_20–24 was demonstrated. Antioxidant activity of fullerenols was studied in model solutions of organic and inorganic oxidizers; changes in toxicities of general and oxidative type were determined; detoxification coefficients were calculated. Fullerenol C₆₀O_2–4(OH)_20–24 revealed higher antioxidant ability at concentrations 10^?17?10^?5 g L^?1. The difference in the toxicity and antioxidant activity of fullerenols was explained through their electron donor/acceptor properties and different catalytic activity. Principles of bioluminescent enzyme assay application for evaluating the toxic effect and antioxidant activity of bioactive compounds were summarized and the procedure steps were described.     

Quantification of Photosensitized Singlet Oxygen Production by a Fluorescent Protein

Fluorescent proteins are increasingly becoming actuators in a range of cell biology techniques. One of those techniques is chromophore‐assisted laser inactivation (CALI), which is employed to specifically inactivate the function of target proteins or organelles by producing photochemical damage. CALI is achieved by the irradiation of dyes that are able to produce reactive oxygen species (ROS). The combination of CALI and the labelling specificity that fluorescent proteins provide is useful to avoid uncontrolled photodamage, although the inactivation mechanisms by ROS are dependent on the fluorescent protein and are not fully understood. Herein, we present a quantitative study of the ability of the red fluorescent protein TagRFP to produce ROS, in particular singlet oxygen (¹O₂). TagRFP is able to photosensitize ¹O₂ with an estimated quantum yield of 0.004. This is the first estimation of a quantum yield of ¹O₂ production value for a GFP‐like protein. We also find that TagRFP has a short triplet lifetime compared to EGFP, which reflects relatively high oxygen accessibility to the chromophore. The insight into the structural and photophysical properties of TagRFP has implications in improving fluorescent proteins for fluorescence microscopy and CALI.     

Supported Gold Nanoparticles for Efficient α‐Oxygenation of Secondary and Tertiary Amines into Amides

Although the α‐oxygenation of amines is a highly attractive method for the synthesis of amides, efficient catalysts suited to a wide range of secondary and tertiary alkyl amines using O₂ as the terminal oxidant have no precedent. This report describes a novel, green α‐oxygenation of a wide range of linear and cyclic secondary and tertiary amines mediated by gold nanoparticles supported on alumina (Au/Al₂O₃). The observed catalysis was truly heterogeneous, and the catalyst could be reused. The present α‐oxygenation utilizes O₂ as the terminal oxidant and water as the oxygen atom source of amides. The method generates water as the only theoretical by‐product, which highlights the environmentally benign nature of the present reaction. Additionally, the present α‐oxygenation provides a convenient method for the synthesis of ¹⁸O‐labeled amides using H₂¹⁸O as the oxygen source.     

Novel and Efficient Synthesis of Water‐Soluble [60]Fullerenol by Solvent‐Free Reaction

Abstract

Water‐soluble fullerenol was conveniently synthesized via the direct solvent‐free reaction of fullerene with a mixture of H₂O₂ and NaOH under grinding conditions in air at room temperature. This practical method provides a novel and efficient access to water‐soluble fullerenol in excellent yield.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Palladium nanoparticles immobilized on amphiphilic and hyperbranched polymer‐functionalized magnetic nanoparticles: An efficient semi‐heterogeneous catalyst for Heck reaction

To address the obstacles facing the use of palladium‐based homogeneous and heterogeneous catalysts in C─C cross‐coupling reactions, a novel semi‐heterogeneous support was developed based on hyperbranched poly(ethylene glycol)‐block ‐poly(citric acid)‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@PCA‐b ‐PEG). Because of the surface modification of the Fe₃O₄ nanoparticles with amphiphilic and hyperbranched polymers (PCA‐b ‐PEG), these hybrid materials are not only soluble in a wide range of solvents (e.g. water, ethanol and dimethylformamide) but also are able to trap Pd²⁺ ions via complex formation of free carboxyl groups of the PCA dendrimer with metal ions. The reduction of trapped palladium ions in the dendritic shell of Fe₃O₄@PCA‐b ‐PEG leads to immobilized palladium nanoparticles. The morphology and structural features of the catalyst were characterized using various microscopic and spectroscopic techniques. The catalyst was effectively used in the palladium‐catalysed Mizoroki–Heck coupling reaction in water as a green solvent. In addition, the catalyst can be easily recovered from the reaction mixture by applying an external magnetic field and reused for more than ten consecutive cycles without much loss in activity, exhibiting an example of a sustainable and green methodology.     

On the Mechanism of Action of Fullerene Derivatives in Superoxide Dismutation

We have studied the mechanism of the antioxidant activity of C₆₀ derivatives at the BP86/TZP level with inclusion of solvent effects (DMSO) by using the COSMO approach. The reaction studied here involves degradation of the biologically relevant superoxide radical (O₂^.?), which is linked to tissue damage in several human disorders. Several fullerene derivatives have experimentally been shown to be protective in cell culture and animal models of injury, but precisely how these compounds protect biological systems is still unknown. We have investigated the activity of tris‐malonyl C₆₀ (also called C₃), which efficiently removes the superoxide anion with an activity in the range of several biologically effective, metal‐containing superoxide dismutase mimetics. The antioxidant properties of C₃ are attributed to the high affinity of C₆₀ to accept electrons. Our results show that once the superoxide radical is in contact with the surface of C₃, its unpaired electron is transferred to the fullerene. This process, which converts the damaging O₂^.? to neutral oxygen O₂, is the rate‐determining step of the reaction. Afterwards, another superoxide radical reacts with C₃^.? to form hydrogen peroxide and in the process takes up the additional electron that was transferred in the first step. The overall process is clearly exothermic and, in general, involves reaction steps with relatively low activation barriers. The capability of C₃ to degrade a highly reactive oxygen species that is linked to several human diseases is of immediate interest for future applications in the field of biology and medicine.     

Water‐Soluble Luminescent Cyclometalated Gold(III) Complexes with cis‐Chelating Bis(N‐Heterocyclic Carbene) Ligands: Synthesis and Photophysical Properties

A new class of cyclometalated Au^III complexes containing various bidentate C‐deprotonated C^N and cis‐chelating bis(N‐heterocyclic carbene) (bis‐NHC) ligands has been synthesized and characterized. These are the first examples of Au^III complexes supported by cis‐chelating bis‐NHC ligands. [Au(C^N)(bis‐NHC)] complexes display emission in solutions under degassed condition at room temperature with emission maxima (λ_max) at 498–633 nm and emission quantum yields of up to 10.1 %. The emissions are assigned to triplet intraligand (IL) π→π* transitions of C^N ligands. The Au^III complex containing a C^N (C‐deprotonated naphthalene‐substituted quinoline) ligand with extended π‐conjugation exhibits prompt fluorescence and phosphorescence of comparable intensity with λ_max at 454 and 611 nm respectively. With sulfonate‐functionalized bis‐NHC ligand, four water‐soluble luminescent Au^III complexes, including those displaying both fluorescence and phosphorescence, were prepared. They show similar photophysical properties in water when compared with their counterparts in acetonitrile. The long phosphorescence lifetime of the water‐soluble AuIII complex with C‐deprotonated naphthalene‐substituted quinoline ligand renders it to function as ratiometric sensor for oxygen. Inhibitory activity of one of these water‐soluble Au^III complexes towards deubiquitinase (DUB) UCHL3 has been investigated; this complex also displayed a significant inhibitory activity with IC₅₀ value of 0.15 μM .     

Superior Rechargeability and Efficiency of Lithium–Oxygen Batteries: Hierarchical Air Electrode Architecture Combined with a Soluble Catalyst

The lithium–oxygen battery has the potential to deliver extremely high energy densities; however, the practical use of Li‐O₂ batteries has been restricted because of their poor cyclability and low energy efficiency. In this work, we report a novel Li‐O₂ battery with high reversibility and good energy efficiency using a soluble catalyst combined with a hierarchical nanoporous air electrode. Through the porous three‐dimensional network of the air electrode, not only lithium ions and oxygen but also soluble catalysts can be rapidly transported, enabling ultra‐efficient electrode reactions and significantly enhanced catalytic activity. The novel Li‐O₂ battery, combining an ideal air electrode and a soluble catalyst, can deliver a high reversible capacity (1000 mAh g^?1) up to 900 cycles with reduced polarization (about 0.25 V).     

Ytterbium(III) Porpholactones: β‐Lactonization of Porphyrin Ligands Enhances Sensitization Efficiency of Lanthanide Near‐Infrared Luminescence

The near‐infrared (NIR) luminescence efficiency of lanthanide complexes is largely dependent on the electronic and photophysical properties of antenna ligands. Although porphyrin ligands are efficient sensitizers of lanthanide NIR luminescence, non‐pyrrolic porphyrin analogues, which have unusual symmetry and electronic states, have been much less studied. In this work, we used porpholactones, a class of β‐pyrrolic‐modified porphyrins, as ligands and investigated the photophysical properties of lanthanide porpholactones Yb‐1 a – 5 a . Compared with Yb porphyrin complexes, the porpholactone complexes displayed remarkable enhancement of NIR emission (50–120 %). Estimating the triplet‐state levels of porphyrin and porpholactone in Gd complexes revealed that β‐lactonization of porphyrinic ligands lowers the ligand T₁ state and results in a narrow energy gap between this state and the lowest excited state of Yb³⁺. Transient absorption spectra showed that Yb^III porpholactone has a longer transient decay lifetime at the Soret band than the porphyrin analogue (30.8 versus 17.0 μs). Thus, the narrower energy gap and longer lifetime arising from β‐lactonization are assumed to enhance NIR emission of Yb porpholactones. To demonstrate the potential applications of Yb porpholactone, a water‐soluble Yb bioprobe was constructed by conjugating glucose to Yb ‐ 1 a . Interestingly, the NIR emission of this Yb porpholactone could be specifically switched on in the presence of glucose oxidase and then switched off by addition of glucose. This is the first demonstration that non‐pyrrolic porphyrin ligands enhance the sensitization efficiency of lanthanide luminescence and also display switchable NIR emission in the region of biological analytes (800–1400 nm).     

A Facile Approach to Fabricate Water‐soluble Au‐Fe3O4 Nanoparticle for Liver Cancer Cells Imaging

Au‐Fe₃O₄ nanoparticles were widely used as nanoplatforms for biologic applications through readily further functionalization. Dopamine (DA)‐coated superparamagnetic iron oxide (SPIO) nanoparticles (DA@Fe₃O₄) have been successfully synthesized using a one‐step process by modified coprecipitation method. Then 2–3 nm gold nanoparticles were easily conjugated to DA@Fe₃O₄ nanoparticles by the electrostatic force between gold nanoparticles and amino groups of dopamine to afford water‐soluble Au‐Fe₃O₄ hybrid nanoparticles. A detailed investigation by dynamic light scatting (DLS), transmission electron microscopy (TEM), fourier transform infrared (FT‐IR) and X‐ray diffraction (XRD) were performed in order to characterize the physicochemical properties of the hybrid nanoparticles. The hybrid nanoparticles were easily functionalized with a targeted small peptide A54 (AGKGTPSLETTP) and fluorescence probe fluorescein isothiocyanate (FITC) for liver cancer cell BEL‐7402 imaging. This simple approach to prepare hybrid nanoparticles provides a facile nanoplatform for muti‐functional derivations and may be extended to the immobilization of other metals or bimolecular on SPIO surface.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Concise Synthesis of Open‐Cage Fullerenes for Oxygen Delivery

Open‐cage fullerenes with a 19‐membered orifice were prepared in three steps from C₆₀. The key step for cage‐opening is aniline mediated ring expansion of a fullerene‐mixed peroxide with a ketolactone moiety on the orifice. Release of ring strain on the spherical fullerene cage served as the main driving force for the efficient cage‐opening sequence. Encapsulation of oxygen could be achieved at room temperature under moderate pressure (50 atm) and the encapsulated oxygen could be released slowly under ambient conditions. The activation energy of the oxygen‐releasing process is 18.8 kcal mol^?1 and the half‐life at 37 °C was 73 min, which makes this open‐cage fullerene derivative a potential oxygen‐delivery material.