Surface-enhanced Raman scattering and surface-enhanced resonance Raman scattering excitation profiles of Ag-2,2'-bipyridine surface complexes and of [Ru(bpy)3]2+ on Ag colloidal surfaces: manifestations of the charge-transfer resonance contributions to the overall surface enhancement of Raman scattering

Excitation profiles of SERS (surface-enhanced Raman scattering) and/or SERRS (surface-enhanced resonance Raman scattering) spectral bands of two forms of a Ag-bpy (bpy = 2,2'-bipyridine) surface complex and of [Ru(bpy)3]2+ on Ag nanoparticle (hydrosol) surfaces were determined from the spectra excited in the 458-600 nm region and are reported together with the FT-SERS spectra of the Ag-bpy surface complex and FT Raman spectra of [Ru(bpy)3] Cl2. Seven of the observed 11 fundamentals as well as their first overtones and combination bands are selectively enhanced in SERS of the Ag-bpy surface complex formed in the Ag colloid/HCl/bpy system. The profiles of these bands show a common maximum at approximately 540 nm. The selectively enhanced bands of the Ag-bpy surface complex have nearly the same wavenumbers as those enhanced in the SERRS and resonance Raman spectra of [Ru(bpy)3]2+ upon excitation close to the 453 nm maximum of its MLCT absorption band. Moreover, the intensity patterns of the bpy vibrations of the two species match both in resonance (541 nm excitation for Ag-bpy, 458 nm for [Ru(bpy)3]2+) and in off-resonance (458 and 1064 nm for Ag-bpy, 1064 nm for [Ru(bpy)3]2+). The distinct band shapes of the excitation profiles of the selectively enhanced vibrational modes of the Ag-bpy surface complex, as well as the observation of overtones and combination bands in the SERS spectra upon excitation into this "band", are interpreted in terms of a charge-transfer resonance contribution to the overall SERS enhancement. In view of the near-coincidence of the vibrational modes coupled to the resonant electronic transition of Ag-bpy with those coupled to the MLCT transition of [Ru(bpy)3]2+, the resonant electronic transition is tentatively assigned to a Ag metal to bpy (pi*) CT transition.     

Excitation wavelength dependent surface-enhanced Raman spectra of a dipping film of azobenzene-containing long-chain fatty acid on a silver mirror

Surface-enhanced Raman scattering (SERS) of dipping films of azobenzene-containing long-chain fatty acids, nAmH (n=8, 12, m=3, 5), on silver mirrors measured with a wide range of excitation wavelengths in the 457.9-1064 nm region is reported. The obtained Raman spectra show great SERS effect even with the 1064 nm excitation, and the excitation with 457.9, 476.5, and 488.0 nm gives surface-enhanced resonance Raman scattering (SERRS) due to the resonance effect of the symmetry-forbidden n-pi* transition of the azo group. Of particular note in the present study is that the SERS spectra with the excitation in the 532-1064 nm region yield Raman bands whose frequencies are almost identical to those bands in Raman spectra of nAmH in solid state while the SERRS spectra with the excitation in the 457.9-514.5 nm region show not only a set of bands which correspond to those of nAmH in the solid state but also a set of bands whose frequencies show a significant shift from those of the bands of nAmH in the solid state. These observations lead us to conclude that there are two kinds of molecular aggregates in the dipping films of azobenzene-containing long-chain fatty acid in which azobenzene moieties are condensed to form small bundles.     

Citrate-reduced silver hydrosol modified with omega-mercaptoalkanoic acids self-assembled monolayers as a substrate for surface-enhanced resonance Raman scattering. A study with cytochrome c

A new citrate-reduced silver hydrosol coated with omega-mercaptoalkanoic acids (mercaptopropionic and mercaptoundecanoic acids) self-assembled monolayers was prepared and characterized with surface-enhanced Raman spectroscopy. The structure and the quality of the coating monolayers are discussed and compared to similar coated and uncoated silver hydrosols previously developed. As an application, the new hydrosol was used as a biocompatible and efficient metal substrate for a surface-enhanced resonance Raman scattering (SERRS) study of cytochrome c. The high-quality SERRS spectra reported of cytochrome c (obtained using only 1 microL of a micromolar cytochrome solution) are discussed and compared with data available from literature studies.     

Silica-coated gold nanostars for combined surface-enhanced Raman scattering (SERS) detection and singlet-oxygen generation: a potential nanoplatform for theranostics

This paper reports the synthesis and characterization of surface-enhanced Raman scattering (SERS) label-tagged gold nanostars, coated with a silica shell containing methylene blue photosensitizing drug for singlet-oxygen generation. To our knowledge, this is the first report of nanocomposites possessing a combined capability for SERS detection and singlet-oxygen generation for photodynamic therapy. The gold nanostars were tuned for maximal absorption in the near-infrared (NIR) spectral region and tagged with a NIR dye for surface-enhanced resonance Raman scattering (SERRS). Silica coating was used to encapsulate the photosensitizer methylene blue in a shell around the nanoparticles. Upon 785 nm excitation, SERS from the Raman dye is observed, while excitation at 633 nm shows fluorescence from methylene blue. Methylene-blue-encapsulated nanoparticles show a significant increase in singlet-oxygen generation as compared to nanoparticles synthesized without methylene blue. This increased singlet-oxygen generation shows a cytotoxic effect on BT549 breast cancer cells upon laser irradiation. The combination of SERS detection (diagnostic) and singlet-oxygen generation (therapeutic) into a single platform provides a potential theranostic agent.     

Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength

A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.     

Reproducible SERRS from structured gold surfaces

Metallic substrates with ordered spherical cavities have been shown to be very effective for surface-enhanced Raman scattering (SERS) and can be fabricated reproducibly using electrodeposition. The sensitivity of detection is increased by several orders of magnitude by using surface-enhanced resonance Raman scattering (SERRS). In this report we demonstrate SERRS for the first time on electrodeposited gold films templated with colloidal spheres and demonstrate the reproducibility of the response. We also obtain a direct comparison between SERRS and SERS by choosing two dyes, Cy5 and Cy3, which are similar in structure but differ in their excitation maxima, such that one is resonant and the other non-resonant with our laser excitation. As expected, the resonant enhancement is found to be of the order of 10(3) over and above that for SERS. The net SERRS enhancements are shown to be of the order of 10(9). We also find that the resonant enhancement profile of the different peaks for the chromophore follows the plasmonic resonance absorption spectrum obtained for the structured surface.     

Surface-enhanced resonance Raman scattering of cytochrome P450-2D6 on coated silver hydrosols

Surface-enhanced resonance Raman scattering (SERRS) from dilute solutions (down to nanomolar concentrations) of human mono-oxygenase CYP2D6 is observed using aqueous dispersions of Ag nanoparticles (hydrosol) coated with self-assembled monolayers (SAMs) of mercaptoalkanoic acids of two different lengths. From a direct comparison with its resonance Raman spectrum in solution, CYP2D6 appears to fully retain its native structure upon adsorption on coated hydrosol through electrostatic interaction, while a structural change in the active site is observed when uncoated citrate-reduced hydrosol is used. Using SERRS on these biocompatible coated hydrosols, the effects of dextromethorphan on the enzyme's active site can be observed, demonstrating that CYP2D6 ability of binding substrates is preserved. Moreover, by tuning the wavelength of the exciting laser away from the main absorption band of the heme, the vibrational bands of the SAM coating are observed and analyzed to see how the presence of the protein affects the SAM structure.     

Surface-enhanced Raman scattering and micro-Raman imaging of Langmuir-Blodgett films of rhodium phthalocyanine

Rhodium phthalocyanine (RhPc) was synthesized and ultra thin Langmuir-Blodgett (LB) films of RhPc were successfully fabricated. The LB film characterization was carried out using both UV-vis absorption spectra and Raman scattering. The Raman spectroscopy was carried out using 633 and 780 nm laser lines. LB films were deposited onto Ag nanoparticles to achieve the surface-enhanced pre-resonance Raman scattering (pre-SERRS) and surface-enhanced Raman scattering (SERS) for both laser lines, respectively, which allowed the characterization of the RhPc ultra thin films. The morphology of the LB RhPc neat film is extracted from micro-Raman imaging.     

Wavelength-scanned surface-enhanced Raman excitation spectroscopy

A detailed wavelength-scanned surface-enhanced Raman excitation spectroscopy (WS SERES) study of benzenethiol adsorbed on Ag nanoparticle arrays, fabricated by nanosphere lithography (NSL), is presented. These NSL-derived Ag nanoparticle array surfaces are both structurally well-characterized and extremely uniform in size. The WS SERES spectra are correlated, both spatially and spectrally, with the corresponding localized surface plasmon resonance (LSPR) spectra of the nanoparticle arrays. The surface-enhanced Raman scattering (SERS) spectra were measured in two excitation wavelength ranges: (1) 425-505 nm, and (2) 610-800 nm, as well as with the 532-nm line from a solid-state diode-pumped laser. The WS SERES spectra have line shapes similar to those of the LSPR spectra. The maximum SERS enhancement factor is shown to occur for excitation wavelengths that are blue-shifted with respect to the LSPR lambda(max) of adsorbate-covered nanoparticle arrays. Three vibrational modes of benzenethiol (1575, 1081, and 1009 cm(-1)) are studied simultaneously on one substrate, and it is demonstrated that the smaller Raman shifted peak shows a maximum enhancement closer to the LSPR lambda(max) than that of a larger Raman shifted peak. This is in agreement with the predictions of the electromagnetic (EM) enhancement mechanism of SERS. Enhancement factors of up to approximately 10(8) are achieved, which is also in good agreement with our previous SERES studies.     

黄曲霉素B1在银团簇表面吸附的表面增强拉曼光谱

采用密度泛函理论(DFT)的B3LYP方法和6-311g(d, p)(C, H, O)/LanL2DZ(Ag)基组, 优化得到黄曲霉素分子AFB₁与Ag小团簇形成的复合物AFB₁-Ag_n (n=2, 4, 6)的稳定结构, 并计算了三种复合物的表面增强拉曼光谱(SERS)和预共振拉曼光谱(SERRS), 与实验结果相一致. 计算结果显示: 三种复合物表面增强拉曼光谱中C＝O伸缩振动模的增强因子约为10²-10³, 是由于极化率改变引起的静化学增强. 根据含时密度泛函理论(TDDFT)方法计算得到的吸收光谱, 分别选择407.5、446.2和411.2 nm作为入射光, 计算三种复合物的共振拉曼光谱, 发现在SERRS光谱中, Ag―O伸缩振动的增强因子达到10⁴量级, 主要是由电荷转移产生的共振增强引起的.     

SERS from molecules adsorbed on small Ag nanoparticles: A microscopic model

A microscopic approach to surface-enhanced Raman scattering (SERS) from molecules adsorbed on noble-metal nanoparticles is developed. For nanoparticle sizes smaller than 10 nm, the classical electromagnetic enhancement mechanism is modified by quantum-size effects. Using time-dependent local field approximation, we perform systematic analysis of SERS in nanometer-sized Ag nanoparticles. We find that, in small nanoparticles, Raman cross-section enhancement is governed by the interplay between Landau damping of the surface plasmon and interband screening in the nanoparticle surface layer.     

In-situ surface-enhanced Raman scattering and FT-Raman spectroscopy of black prints

The black inkjet and laser prints were analysed with regard to application in forensic analysis of questioned documents. The purpose of this work was to study spectral properties and compare the suitability of surface-enhanced Raman scattering (SERS) with Fourier transform Raman spectra of prints. This work aimed to find optimal surface-enhanced Raman spectroscopic approach for the future analysis of documents using statistical methods. In this work, we analysed eight prints of four laser and four inkjet devices. The samples were measured using two dispersive Raman devices; (DXR Raman microscope with excitation line 532 nm, Foram 685-2 spectrometer − 685 nm) and FT-Raman device (Bruker Spectrometer MultiRAM with excitation line 1064 nm). The silver nanoparticles (AgNPs) colloid for SERS experiment were synthesised and checked by UV–vis spectroscopy and scanning electron microscopy (SEM). The remarkable differences caused by centrifugation of silver colloid were observed just in the SEM images. The main contribution of this paper is to propose the novel approach achieving sufficient SERS signal intensity of black prints using the both, laser and inkjet printers. Moreover, this method is based on just a single metal colloid, and the analysis can be performed in-situ, i.e. directly on the printed sample surface. We consider the SERS could by highly promising and universal for applications in the forensic analysis of printed documents with the combination of statistical method when conventional methods are not effective.     

The adsorption of rifampicin on gold or silver surfaces mediated by 2-mercaptoethanol investigated by surface-enhanced Raman scattering spectroscopy

In this work the adsorption of the antibiotic rifampicin (RP) on the surface of gold (AuNP) or silver nanoparticles (AgNP) was investigated using both surface-enhanced Raman scattering (SERS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopies. Such spectra were obtained in the absence and presence of the surface modifier 2-mercaptoethanol (ME) using excitations by laser radiations of 532, 632.8 and 1064 nm wavelengths. The use of different conditions under the presence of ME led to changes in the spectral pattern ascribed to the influence of resonance Raman (RR) effect and distinct chemical interactions of RP with the metallic surfaces. The sensibility of the chromophoric moiety, i.e. a <pi>-conjugated orbital, to the adsorption geometries, which can be controlled by surface modifiers, impacts the RR effect. Theoretical models involving RP and metal atoms were obtained from Density Functional Theory (DFT) calculations, and used for supporting the vibrational assignment.     

Electrochemical pathway for the quantification of SERS enhancement factor

This communication presents a new pathway for the more precise quantification of surface-enhanced Raman scattering (SERS) enhancement factor via deducing resonance Raman scattering (RRS) effect from surface-enhanced resonance Raman scattering (SERRS). To achieve this, a self-assembled monolayer of 1,8,15,22-tetraaminophthalocyanatocobalt(II) (4α-Co^IITAPc) is formed on plasmon inactive glassy carbon (GC) and plasmon active GC/AuNP surface. The surfaces are subsequently used as common probes for electrochemical and Raman (RRS and SERRS) studies. The most crucial parameters required for the quantification of SERS substrate enhancement factor (SSEF) such as real surface area of GC/AuNPs substarte and the number of 4α-Co^IITAPc molecules contributing to RRS (on GC) and SERRS (on GC/AuNPs) are precisely estimated by cyclic voltammetry experiments. The present approach of SSEF quantification can be applied to varieties of surfaces by choosing an appropriate laser line and probe molecule for each surface.     

Silver Nano Islands Enhanced Raman Scattering on Large Area Grating Substrates Fabricated by Two Beam Laser Interference

The authors preparedlarge area surface-enhanced Raman scattering(SERS) active substrates with tunable enhancement. First the large area gratings were fabricated by scanning a photoresist with two-beam laser interference and subsequently they were coated with silver nano islands via vacuum evaporation. SERS active metal island grating substrates with four different periods(300, 400, 515 and 600 nm) and Ag nano islands uniformly coated on an area of 2.5 cm×0.5 cm were obtained. The measured SERS spectra reveal the tuning effect of the period on the Raman signals period. The highest enhancement(ca. 10⁵) for Rhodamine 6G(R6G) as probing molecule is associated with a period of 515 nm due to the perfect matching of surface plasmons and Raman excitation line. A good reproducibility of SERS signals with almost the same SERS intensity at different spots was observed on all the larger area Ag island grating substrates.     

Single molecule analysis by surfaced-enhanced Raman scattering

Our main objective in this tutorial review is to provide insight into some of the questions surrounding single molecule detection (SMD) using surface-enhanced Raman scattering (SERS) and surface-enhanced resonance Raman scattering (SERRS). Discovered thirty years ago, SERS is now a powerful analytical tool, strongly tied to plasmonics, a field that encompasses and profits from the optical enhancement found in nanostructures that support localized plasmon excitations. The spectrum of the single molecule carries the quantum fingerprints of the system modulated by the molecule-nanostructure interactions and the electronic resonances that may result under laser excitation. This information is embedded in vibrational band parameters. The dynamics and the molecular environment will affect the bandwidth of the observed Raman bands. In addition, the localized surface plasmon resonances (LSPR) empower the nanostructure with a number of optical properties that will also leave their mark on the observed inelastic scattering process. Therefore, controlling size, shape and the formation of the aggregation state (or fractality) of certain metallic nanostructures becomes a main task for experimental SERS/SERRS. This molecule-nanostructure coupling may, inevitably, lead to spectral fluctuations, increase photobleaching or photochemistry. An attempt is made here to guide the interpretation of this wealth of information when approaching the single molecule regime.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

Surface-enhanced Raman scattering of trans-1,2-bis (4-pyridyl)-ethylene on silver by theory calculations

Surface-enhanced Raman spectra of trans-1,2-bis (4-pyridyl)-ethylene (t-BPE) on silver foil were detected at laser line of 514.5, 633, 785 and 1064 nm, respectively. The structure of Ag-t-BPE, Ag4-t-BPE, Ag6-t-BPE, Ag10-t-BPE and Ag20-t-BPE complexes has been calculated using a local version of the Amsterdam density functional program package. The Raman spectra and electronic polarizability of t-BPE-Ag at 514.5, 633, 785 and 1064 nm excitation lines were calculated. The Raman bands of t-BPE were assigned according to the calculation of potential energy distribution. The experimental and calculated Raman spectra of t-BPE-Ag at 514.5, 633, 785 and 1064 nm were compared. The relative Raman intensities change at different excitation lines were discussed based on the Raman enhanced mechanism and surface selection rules.     

Direct visual evidence for chemical mechanism of SERRS of pyrazine adsorbed on Ag nanoparticle via charge transfer

In this paper, the chemical enhancement of surface-enhanced resonance Raman scattering (SERRS) of pyrazine adsorbed on Ag nanoparticles through charge transfer was experimentally and theoretically investigated. Based on the calculations by density functional theory (DFT) and time-dependent DFT (TD-DFT), we theoretically analyzed the absorption spectra and SERS spectrum of the S-complex of pyrazine–Ag₂₀. The charge transfer in the process of resonant electronic transitions between adsorbed molecule and metal cluster can be visualized by the method of charge difference density. It is a direct evidence for the chemical enhancement mechanism of SERRS of pyrazine molecule adsorbed on Ag nanoparticle via charge transfer between molecule and metal. Additionally, the intracluster charge redistribution was also considered as an evidence for the electromagnetic enhancement. By comparing the experimental and theoretical results, it was demonstrated that the SERRS of the pyrazine molecule absorbed on silver clusters in different incident wavelength regions is dominated by different enhancement mechanisms via the chemical and electromagnetic enhancements.     

Inherent complexities of trace detection by surface-enhanced Raman scattering.

Surface-enhanced Raman scattering (SERS) and surface-enhanced resonance Raman scattering (SERRS) are powerful optical scattering techniques used in such frontier areas of research as ultrasensitive chemical analysis, the characterization of nanostructures, and the detection of single molecules. However, measuring and, most importantly, interpreting SERS/SERRS spectra can be incredibly challenging. This is the result of modifications to the measured spectra that are due to of a variety of instabilities and contributions. These interferences and modifications arise from the nature of the enhancement itself, as well as the conditions used to attain SERS spectra. The present report is an attempt to collect in one place the analytical interferences that are most commonly found during the collection of SERS/SERRS spectra.