Portable smart films for ultrasensitive detection and chemical analysis using SERS and SERRS

Metallic nanostructures, much smaller than the wavelength of visible light, which support localized surface plasmon resonances, are central to the giant signal enhancement achieved in surface‐enhanced Raman scattering (SERS) and surface‐enhanced resonance Raman scattering (SERRS). Plasmonic driven SERS and SERRS is a powerful analytical tool for ultrasensitive detection down to single molecule detection. For all practical SERS applications a key issue is the development of reproducible and portable SERS‐active substrates, where the most widely used metals for nanostructure fabrication are silver and gold. Here, we report the fabrication of a ‘smart film’, containing gold nanoparticles (AuNPs), produced by in situ reduction of gold chloride III (Au⁺³) in natural rubber (NR) membranes for SERS and SERRS applications. The composite films (NR/AuNP membranes) show characteristic plasmon absorption of Au nanostructures, which notably do not influence the mechanical properties of the NR membranes. The term ‘smart film’ has to do with the fact that the SERS substrate (smart film) is flexible and standalone, which allows one to take it anywhere and to dip it into solutions containing the analyte to be characterized by SERS or SERRS technique. Besides, the synthesis of the AuNPs at the surface of NR films is much simpler than making an Au colloid and cast it onto a substrate surface or preparing an Au evaporated film. Copyright © 2012 John Wiley & Sons, Ltd.     

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Molecular and morphological characterization of bis benzimidazo perylene films and surface-enhanced phenomena

Thin solid films of bis benzimidazo perylene (AzoPTCD) were fabricated using physical vapor deposition (PVD) technique. Thermal stability and integrity of the AzoPTCD PVD films during the fabrication ( approximately 400 degrees C at 10(-6) Torr) were monitored by Raman scattering. Complementary thermogravimetric results showed that thermal degradation of AzoPTCD occurs at 675 degrees C. The growth of the PVD films was established through UV-vis absorption spectroscopy, and the surface morphology was surveyed by atomic force microscopy (AFM) as a function of the mass thickness. The AzoPTCD molecular organization in these PVD films was determined using the selection rules of infrared absorption spectroscopy (transmission and reflection-absorption modes). Despite the molecular packing, X-ray diffraction revealed that the PVD films are amorphous. Theoretical calculations (density functional theory, B3LYP) were used to assign the vibrational modes in the infrared and Raman spectra. Metallic nanostructures, able to sustain localized surface plasmons (LSP) were used to achieve surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF).     

Puiseux parametric equations of analytic sets

We prove the existence of local Puiseux-type parameterizations of complex analytic sets via Laurent series convergent on wedges. We describe the wedges in terms of the Newton polyhedron of a function vanishing on the discriminant locus of a projection. The existence of a local parameterization of quasi-ordinary singularities of complex analytic sets of any codimension will come as a consequence of our main result.

     

Surface-enhanced Raman scattering in the ultraviolet spectral region: UV-SERS on rhodium and ruthenium electrodes

We report the first observation of surface-enhanced Raman scattering (SERS) excited with ultraviolet (UV) light from transition metal electrodes. Adsorbed pyridine and SCN- on rough rhodium (Rh) and ruthenium (Ru) electrodes, respectively, have been studied using 325 nm laser excitation. In contrast, the best enhancers in the visible and near infrared, silver and gold, do not produce UV-SERS. The experimental data of UV-SERS are in agreement with our preliminary theoretical calculation based on the electromagnetic enhancement mechanism. The enhancement factor is about 2 orders of magnitude for the Rh and Ru electrodes when they are excited at 325 nm.     

SERS detection of environmental pollutants in humic acid-gold nanoparticle composite materials

Humic acid (HA) solutions provide an unexpected medium for direct fabrication of gold nanoparticles (HA-AuNP) and a clear window for surface-enhanced Raman scattering (SERS) with many potential applications in the ultrasensitive chemical analysis of environmental pollutants. It is demonstrated that the HA-AuNP fabrication can be easily achieved in a wide range of pH (2 to 12). The background SERS spectra of HA is relatively weak in absolute intensity, allowing the detection of the enhanced Raman signal from trace amount of contaminants. An in-situ approach is illustrated where the HA-AuNP fabrication is carried out with a HA solution containing the target pollutant. The technique may allow for the direct detection of organic pollutants present in the humic fraction of soil.     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.