电喷雾质谱半定量方法研究制川乌配伍后的大鼠肠内菌生物转化

利用建立的代谢前后生物碱成分的电喷雾质谱半定量分析方法,通过分析各药对共煎液经大鼠肠内菌群代谢后主要生物碱的含量变化,对制川乌与浙贝母、法半夏、白蔹分别配伍后共煎液中双酯型、单酯型及脂型生物碱的肠内菌生物转化进行了深入研究,研究结果表明,配伍后中药浙贝母增加共煎液中双酯型生物碱含量,法半夏降低共煎液中双酯型生物碱含量,而白蔹对共煎液中双酯型生物碱含量影响不大;在代谢过程中,大鼠肠内菌群能够将复方中双酯型生物碱转化为脂型生物碱,从而达到中药配伍的减毒增效目的。本文通过化学方法和肠内菌代谢研究证明了制川乌配伍及代谢的机理。     

川乌与半夏、瓜蒌、贝母、白蔹、白芨配伍禁忌的化学研究

运用高效液相色谱方法,定量分析了川乌单煎液及其与生半夏、法半夏、全瓜蒌、瓜蒌皮、瓜蒌籽、浙贝母、川贝母、白蔹、白芨共煎液的双酯型生物碱含量.并利用电喷雾质谱通过加入内标的半定量分析方法研究生川乌配伍前后生物碱成分和含量的变化.结果显示生川乌与生半夏、瓜蒌籽、全瓜蒌、瓜蒌皮、浙贝母、白芨的共煎液中双酯型生物碱含量高于生川乌单煎液而生川乌与法半夏、川贝母、白蔹的共煎液双酯型生物碱含量变化微弱或有所减少.电喷雾质谱半定量分析方法与高效液相色谱方法的分析结果一致,并且与上述药对的LD50值结果也基本一致.而毒性成分的变化趋势与共煎前后溶液的pH变化相关.     

川乌与半夏配伍禁忌的化学研究

应用高效液相色谱和电喷雾质谱技术,通过分析生、制川乌单煎及其与生、法半夏共煎液中乌头碱类生物碱的含量和转变途径,发现生半夏在与川乌共煎时对乌头类剧毒生物碱的转化表现出明显的抑制作用,而法半夏却能很好的促进乌头碱类剧毒生物碱的转化,说明川乌与半夏是否可以共用与半夏的炮制与否和炮制方法存在着密切联系.     

"甘草附子汤"和"术附汤"肠内生物转化的电喷雾质谱研究

以电喷雾质谱法作为研究方法,以内标化合物为切入点,对复方中双酯型、单酯型及脂型生物碱的生物转化进行了深入研究,建立了电喷雾质谱对代谢前后生物碱成分的半定量分析方法.分析了中药复方甘草附子汤和术附汤经大鼠肠内菌群代谢主要生物碱的含量变化,研究结果表明,配伍中药甘草和白术可以有效地降低共煎液中双酯型生物碱含量,在代谢过程中...     

复方乌头汤配伍贝母化学成分变化研究

将超高效液相色谱-质谱联用(UPLC-MS) 及UPLC-MSⁿ技术与偏最小二乘法判别分析(PLS-DA)结合, 对乌头汤分别与川贝、 浙贝按照制川乌与贝母生药质量比1: 1配伍前后化学成分的变化情况进行了研究. 在PLS-DA模型中, 乌头汤与川贝、 浙贝配伍前后的煎煮液均可明显区分. 乌头汤与川贝共煎后获得8个化学标志物, 可鉴定出7个化合物, 其中尼奥灵、 附子灵及苯甲酰基新乌头原碱在共煎后含量上升, 塔拉定、 10-OH苯甲酰基乌头原碱、 10-OH苯甲酰基新乌头原碱和苯甲酰基去氧乌头原碱在配伍后含量下降. 乌头汤与浙贝共煎后获得7个化学标志物, 分别为Chuanfumine、 Songorine、 塔拉定、 尼奥灵、 附子灵、 苯甲酰基新乌头原碱和10-OH苯甲酰基新乌头原碱, 所有化学标志物的含量在共煎后均降低.     

UPLC-Q-TOF/MS分析不同比例丹参配伍藜芦毒性生物碱变化规律

利用超高效液相色谱-飞行时间质谱联用技术研究不同配伍比例的丹参藜芦的化学指纹图谱, 并分析毒性生物碱在不同比例配伍混煎前后溶出量的变化. 同时利用小鼠的急性毒性实验来考察配伍后的毒性变化规律. 结果显示在正离子模式下, 各配伍组(A～H)样本之间的差异能得到明显区分, 并结合Loadings图谱和数据库确定了配伍化学指纹图谱中的17种藜芦生物碱毒性成分, 当固定藜芦用量为LD₅₀且藜芦比例大于丹参时, 藜芦定、伪介芬胺等生物碱溶出高于或与藜芦单煎液相当, 但随着丹参比例增加, 上述生物碱溶出呈逐渐下降趋势, 当丹参比例大于藜芦时, 生物碱溶出低于藜芦单煎液. 不同比例丹参藜芦配伍急性毒性实验毒性变化规律与上述生物碱含量的变化趋势吻合, 表明上述毒性生物碱可能是藜芦与丹参特定比例配伍后毒性增强主要化学标志物.     

松花粉干预卵巢早衰大鼠肝脏的广泛靶向代谢组学分析

卵巢早衰是妇科领域的常见病,中医认为卵巢早衰与肝肾的正常与否息息相关,通过药食两用物质对肝脏代谢的调理是治疗卵巢早衰的一种重要手段。该研究基于超高效液相色谱-三重四极杆质谱(UHPLC-MS/MS)建立的广泛靶向代谢组学技术,探讨破壁松花粉对环磷酰胺诱导的卵巢早衰模型大鼠肝脏代谢的影响,旨在通过测定对照组、模型组、雌激素阳性对照组及施以不同剂量的松花粉干预组的SD大鼠肝脏组织中代谢物的含量变化,结合主成分分析(PCA)、正交偏最小二乘判别分析(OPLS-DA)等多元统计方法揭示松花粉干预卵巢早衰大鼠肝脏代谢的作用机制。通过正、负离子模式共检测出687种肝脏代谢物,PCA与OPLS-DA显示环磷酰胺诱导的模型组能够与对照组、阳性对照组、松花粉干预组等组别之间的代谢物较好的分离。通过单变量分析中的t检验(p<0.05)、变异倍数(FC>2或<0.5)与多变量分析中变量投影重要性(VIP值)>1相结合对差异代谢物进行筛选。与对照组相比,模型组SD大鼠肝脏中的32个生物标志物含量显著升高,28个生物标志物含量显著降低,主要涉及α-亚麻酸代谢、维生素B6代谢、嘌呤代谢、赖...     

人参与附子、黄连配伍的HPLC-ESI-MS研究及抗氧化活性测定

采用高效液相色谱与电喷雾质谱联用技术(HPLC-ESI-MS)对不同比例的人参与附子或黄连的水煎液、药渣和沉淀进行研究, 共鉴定了8种人参皂苷, 发现加入附子或黄连后, 溶液中人参皂苷含量明显减少, 进一步研究证明附子或黄连中的某些成分阻止了皂苷的溶出; 同时以抗坏血酸作对照, 应用铁离子还原/抗氧化能力测定法(FRAP)测定了人参单煎液及人参与附子、黄连共煎液中正丁醇提取物和水提取物的抗氧化活性. 结果证明, 共煎液中正丁醇提取物的抗氧化活性高于人参单煎液, 同时也高于人参与附子或黄连单煎混合液的抗氧化活性, 但水提取物抗氧化活性的变化规律有所不同, 这可能与煎煮过程中物质之间的相互作用有关.     

麻黄-甘草药对配伍前后主要药效成分及抗炎活性的变化

利用高效液相色谱串联质谱联用法(HPLC-MS/MS)和气相色谱质谱联用法(GC-MS)分析了麻黄与甘草药对配伍前后水煎液中主要药效成分的变化,并通过小鼠的耳廓肿胀试验考察了甘草、麻黄单煎液及药对共煎液的抗炎活性变化.分别通过HPLC法和GC-MS法对甘草与麻黄中主要化学成分,甘草酸、甘草苷、麻黄碱和甲基麻黄碱进行了定量分析,通过单煎液和药对共煎液的对比,发现麻黄与甘草配伍共煎液中麻黄碱(含伪麻黄碱)的含量增加了14.52%;甲基麻黄碱(含甲基伪麻黄碱)的含量增加了64.0%;甘草酸含量增加了13.50%;而甘草苷含量降低了19.38%.药效实验证明,甘草与麻黄配伍后抗炎作用较甘草麻黄单煎液明显增强.从而在主要成分的变化程度上揭示了甘草与麻黄配伍过程中的增效机理.     

麻黄-甘草药对配伍过程中的主要药效成分的分析

利用高效液相色谱串联质谱联用法(HPLC-MS/MS)和气相色谱质谱联用法(GC-MS)分析了麻黄与甘草药对配伍前后水煎液中主要药效成分的变化,并通过小鼠的耳廓肿胀试验考察了甘草、麻黄单煎液及药对共煎液的抗炎活性变化。分别通过HPLC法和GC-MS法对甘草与麻黄中主要化学成分,甘草酸、甘草苷、麻黄碱和甲基麻黄碱进行了定量分析,通过单煎液和药对共煎液的对比,发现麻黄与甘草配伍共煎液中麻黄碱（含伪麻黄碱）的含量增加了14.52%;甲基麻黄碱（含甲基伪麻黄碱）的含量增加了64.0%;甘草酸含量增加了13.50%;而甘草苷含量降低了19.38%。药效实验证明,甘草与麻黄配伍后抗炎作用较甘草麻黄单煎液明显增强。从而在主要成分的变化程度上揭示了甘草与麻黄配伍过程中的增效机理。     

Molecular design of tautomeric interconversions of heterocycles

A classification and methodology of molecular design of ring—chain—ring (ring—ring) tautomeric systems by superposition of ring—chain equilibria in a structure of one molecule are considered.     

Long-lived room temperature phosphorescence of a naphthalene—β-cyclodextrin—adamantane complex in the presence of oxygen

Naphthalene-d₈—-cyclodextrin—adamantane triple complexes were prepared in an aqueous solution at room temperature. Irradiation ( = 285 nm) of the solution in the presence of molecular oxygen results in the long-lived ( = 10.3 s) room temperature phosphorescence (RTP). The removal of oxygen from the solution increases the RTP intensity and phosphorescence lifetime by 1.5 times. The RTP spectrum contains a well-resolved vibrational structure, whose bands are assigned to full symmetric vibrations of naphthalene, their overtones, and the combination tones of full symmetric vibrations. The quantum-chemical calculation of the triple complex structure confirms that both naphthalene and adamantane can simultaneously be included into the -cyclodextrin cavity and suggests that the role of the latter as the third component is the more efficient shielding of naphthalene from the oxygen effect due to both the formation of three-component complexes and their aggregation to form submicronic particles.     

NDDO semiempirical approximations coupled with Green's function technique—a reliable approach for calculating ionization potentials

The ionization potentials of different molecules have been calculated with the outer valence Green's function (OVGF) technique, coupled with semiempirical MNDO, AM1 and PM3 methods. It is found that the OVGF method gives significantly better agreement with the experimental data than do results obtained with semiempirical calculations using Koopman's theorem including a new SAM1 and MNDO/d methods. Of the three semiempirical methods tested (MNDO, AM1, PM3) the OVGF (AM1) method gives the best agreement with experiment.     

The ternary system nickel—aluminum—carbon

Phase equilibria in the ternary system nickel—aluminum—carbon were determined. The phase boundaries are given for an isothermal section at 1000°C. No ternary phase occurs, but Ni₃Al() exhibits a solubility for carbon up to 7–8 at%. NiAl() also dissolves carbon (ca. 3 at%).

---

Das ternäre System Nickel—Aluminium—Kohlenstoff

Zusammenfassung Die Phasengleichgewichte im ternären System Nickel—Aluminium—Kohlenstoff wurden für den isothermen Schnitt bei 1000°C bestimmt. Die Löslichkeiten und Phasengrenzen werden angegeben. Es tritt keine ternäre Phase auf, aber Ni₃Al() löst bis zu 7–8 at% Kohlenstoff. NiAl() löst ebenfalls Kohlenstoff (ca. 3 at%).

     

Reduction of steroidal ketones with amine—boranes

Complexes of secondary amines with borane, R₂NH·BH₃, surpass sodium borohydride as reducing agents for saturated and unsaturated steroidal 3-, 12-, 17-, and 20-ketones as regards chemo- and regioselectivity and mildness of the reaction conditions. In the case of 12-ketones, stereoselectivity is also improved.     

Calorimetric analyses on aged Al–4.4Cu–0.5Mg–0.9Si–0.8Mn alloy (AA2014 grade)

An Al–4.4Cu–0.5Mg–0.9Si–0.8Mn alloy (IADS 2014 grade) in the solution annealed and peak aged condition was exposed at 170°C for relatively long times (up to about 1800 h) in order to check the stability of the alloy. The investigated aging temperature was in the frame of a research on the long-term mechanical behaviour of such alloy. Microstructure evolution was monitored via calorimetric analyses, metallographic inspections and hardness measurements. Further, X-ray analyses were carried out on selected samples. The attention was focused on differential scanning calorimetry performed at different scanning rates, with the aim of evaluating the kinetics of the precipitation phenomena. Notwithstanding the wide industrial diffusion of this alloy, literature survey showed that there is not a consensus view on the precipitation sequences and on calorimetric peak identification. The present results show the progressive evolution of calorimetric peaks, corresponding to that of strengthening particles towards more stable phases, proved by the disappearance of exothermic peaks. Activation energy from Kissinger kinetic analysis in the case of aged samples provided scattered values that could be reasonably attributed to an overlapping of transformation peaks. Moreover, in these samples transformations partially occurred before DSC scans, providing non-constant transformation fraction at signal peak temperatures and resulting in different activation energies.     

Direct Transformation of Arenols Based on C—O Activation

In the view of substrate availability, atomic efficiency and cost, directly using arenols as coupling partners in cross‐coupling, would be one of the most attractive goals. Up to date, many efforts have been made to activate the C—O bond of phenols with different strategies, for example, through in‐situ formed intermediates, through a catalytic reductive dearomatization‐condensation‐rearomatization sequence or catalytic deoxygenation. In this review, we summarized recent advances in cross‐couplings of arenols as the electrophiles via C—O activation.     

Two-colour bound—free—bound spectroscopy of the [E1/2]c6S Rydberg states of CH3I and CD3I

In this resonantly enhanced multiphoton ionization (REMPI) experiment, an extended vibrational progression in the CI stretching mode (v₃) of methyl iodide (-h₃ and -d₃) is observed in the 1 + 1′ excitation of the [1/2] 6s; 0 Rydberg state when the pump photon wavelength lies in the bound → free absorption continuum. This is in contrast with one-colour coherent (non-resonant) two-photon excitation, where the v₃ mode is not excited. By working at several different fixed probe wavelengths and scanning the pump frequency, the relative contributions from the three intermediate repulsive states can be explored through changes in the relative strengths of the Ω = 0 and 1 components of the final Rydberg states. Extensive predissociation in the Rydberg states curtails the vibrational progression.     

Modelling of polymer aggregates in solution

The self-consistent mean field model of Scheutjens and Fleer is used to model spherical aggregates of homopolymers and monomer—polymer particles in solution. For homopolymer aggregates we found that the chain ends are preferentially located at the exterior side of the polymer/solvent interface. The distribution of the end segments may be an important parameter in latex film formation. For monomer—polymer particles a “core-shell” structure is found with an extended core containing a monomer—polymer mixture and a thin shell a few nanometres thick strongly enriched with monomer. The monomer-enriched shell seems to function as a solvating envelope for the dangling chain ends. These results are compared with other simulations based on a single chain in a spherical-cavity model.     

Pd‐Catalyzed C—S Cyclization via C—H Functionalization Strategy: Access to Sulfur‐containing Benzoheterocyclics

A C—H sulfurated cyclization protocol starting from thioacetates is developed for straightforward construction of sulfur‐containing benzoheterocyclics. The diversiform functional dihydrobenzothiophenes and thiochromans were comprehensively achieved through the Pd‐catalyzed carbon‐ sulfur cyclization. Mechanistic studies indicated that C—H bond cleavage was involved in the rate‐determining step. [1]Benzothieno‐[3,2‐b]‐ [1]benzothiophene (BTBT) and benzo[b]thieno[2,3‐d]thiophene (BTT) were efficiently established as the well‐known organic field‐effect transistor (OFET) material molecules through this methodology.