Phase separation of polyphosphazene/poly(lactide‐co‐glycolide) blends prepared under different conditions

Using a mutual solvent technique, blend films of poly[(alaine ethyl ester)_0.62(glycine ethyl ester)_0.38]phosphazene/poly(lactide‐co‐glycolide) (PAGP/PLGA blend) were prepared at different conditions including weight ratios, solvents, environmental humidity, film thickness, and substrates. The morphology and properties of blend films were characterized by scanning electron microscope (SEM), energy dispersive spectrometer (EDX), X‐ray photoelectron spectrometry (XPS), and solvent selective etching. Compared with dichloromethane and tetrahydrofuran (THF), chloroform was the better solvent to form miscible PAGP/PLGA blend films at relatively anhydrous atmosphere. However, in the humid atmosphere, the hexagonal arrangement of holes appeared on the surface of PAGP/PLGA blend films due to the ordered array of water droplets. A sandwich‐liked structure was formed with the hydrophilic PAGP component at the top and bottom, while the PLGA component in the middle. In addition, the surface morphology of PAGP/PLGA blend films was also influenced by the film thickness and the property of the substrate. Copyright © 2010 John Wiley & Sons, Ltd.     

Properties of poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate) membrane modified by polyurethane containing carboxyl group

A series of poly(γ-benzyl l-glutamate) (PBLG)/polyurethane (PU) containing carboxyl group blend membranes was prepared by casting the polymer blend solution in dimethylformamide (DMF). The surface morphology of the PBLG/PU blend membranes was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PBLG/PU blend membranes were studied by differential scanning calorimetry (DSC), tensile tests and other physical methods. It was revealed that the introduction of PU could exert outstanding effects on the morphology and the properties of PBLG membrane.     

Modification of hydrophilic poly(vinyl alcohol) film via blending with hydrophobic poly(butyl acrylate-co-methyl methacrylate)

A series of poly(vinyl alcohol)/poly(butyl acrylate-co-methyl methacrylate) [PVA/P(BA-co-MMA)] blend films with different P(BA-co-MMA) content were prepared by the solution casting method. Surface morphologies of the PVA/P(BA-co-MMA) blend films were studied by scanning electron microscopy and atomic force microscopy. Thermal, mechanical, and chemical properties of PVA/P(BA-co-MMA) blend films were investigated by differential scanning calorimeter, thermogravimetric analysis, tensile tests, and surface contact angle tests. It was revealed that the introduction of P(BA-co-MMA) could affect the properties of the PVA films. The results also showed that, when P(BA-co-MMA) mole content is 3 %, the tensile strength and the surface contact angle of the polymer blend film are 20.4 MPa and 43.5°, respectively, suggesting that the polymer blend film holds both a better mechanical property and a better chemical property.     

Synthesis, characterization and protein adsorption behaviors of PLGA/PEG di-block co-polymer blend films

A series of poly(D,L-lactic-co-glycolic acid) (PLGA)/poly(ethyleneglycol) (PEG) di-block copolymers were synthesized by ring-opening polymerization of D,L-lactide and glycolide with different molecular weights of monomethoxy polyethyleneglycol (mPEG) 750, 2000 and 5000 as an initiator. The bulk properties of these co-polymers were characterized by using 1H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry (DSC). Electron spectroscopy for chemical analysis (ESCA) results, in which the blend films with the di-block copolymers showed increasing surface oxygen atomic percentage with increasing PEG chain length, indicate that PEG chain segment in the di-block copolymers is surface oriented and enriched onto the surface of the blend films. The extent of protein adsorption onto the surface of these blend films was studied, using iodine radio-labeled human serum albumin, gamma globulin and human growth hormone. The protein adsorption amount was reduced for the blend films prepared with PLGA/PEG 750 and 2000 di-block copolymers, but increased to a great extent for PLGA/PEG 5000 di-block copolymer. This is due to the increased water uptake capacity of the blend film, which absorbed more protein molecules into a swollen polymer matrix in addition to surface adsorption.     

Properties of water-soluble carboxymethyl chitosan film modified by hydrophobic poly(propylene glycol)

A series of water-soluble carboxymethyl chitosan (CMCS)/poly(propylene glycol) (PPG) blend films with various CMCS/PPG mole ratios were prepared by the solution casting method. Morphology of the CMCS/PPG blend films was investigated by scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of the CMCS/PPG blend films were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), tensile tests, and contact angle tests. It was found that the introduction of PPG can markedly affect the morphology and the properties of CMCS films.     

Cellulose acetate blends with acrylonitrile/N-phenyl maleimide copolymers morphological and thermal properties

Cellulose acetate (CA) was blended in different compositions with various acrylonitrile-N-halo phenyl maleimide (AN-XPhM) copolymers to improve the thermal and mechanical properties of cellulose acetate. The structure, morphology, thermal stability, and crystallinity of the blend films were characterized by infrared spectroscopy, scanning electron micrographs, thermogravimetry/differential thermal analysis, differential scanning calorimetry, and X-ray diffraction. The results revealed that the thermal stability was improved by the increase in AN-XPhM content, irrespective of the type of the N-halo phenyl maleimide. The CA/AN-4BrPhM blend films possessed the highest thermal stability compared to the other CA/AN-XPhM blend films. Blending CA with AN-4BrPhM yielded the most homogeneous blend films, irrespective of the composition ratio. The mechanical properties of various compositions of the CA/AN-4BrPhM blend films were also discussed.     

Thermal,mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Polymer blend nanocomposites based on thermoplastic polyurethane (PU) elastomer, polylactide (PLA) and surface modified carbon nanotubes were prepared via simple melt mixing process and investigated for its mechanical, dynamic mechanical and electroactive shape memory properties. Chemical and structural characterization of the polymer blend nanocomposites were investigated by Fourier Transform infrared (FT-IR) and wide angle X-ray diffraction (WAXD). Loading of the surface modified carbon nanotube in the PU/PLA polymer blends resulted in the significant improvement on the mechanical properties such as tensile strength, when compared to the pure and pristine CNT loaded polymer blends. Dynamic mechanical analysis showed that the glass transition temperature (T_g) of the PU/PLA blend slightly increases on loading of pristine CNT and this effect is more pronounced on loading surface modified CNTs. Thermal and electrical properties of the polymer blend composites increases significantly on loading pristine or surface modified CNTs. Finally, shape memory studies of the PU/PLA/modified CNT composites exhibit a remarkable recoverability of its shape at lower applied dc voltages, when compared to pure or pristine CNT loaded system.     

Effects of molecular weight of nitrocellulose on structure and properties of polyurethane/nitrocellulose IPNs

Semi‐interpenetrating polymer network (semi‐IPN) coatings were prepared by using castor oil‐based polyurethane (PU) and nitrocellulose (NC) with various viscosity‐average molecular weights (M_η) from 6 × 10⁴ to 42 × 10⁴, and coated on a regenerated cellulose (RC) film to obtain water‐resistant film. The PU/NC coatings and coated films, which were cured at 80°C for 5 min and 2 min, respectively, were investigated by infrared (IR) and ultraviolet (UV) spectroscopy, X‐ray diffraction, swelling test, strength test, dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results show that the crosslink densities of the PU/NC semi‐IPNs were smaller than that of pure PU, and decreased with the decrease of M_η of nitrocellulose (NC M_η), indicating NC molecules cohered intimately with PU, and hindered the PU network formation. The physical and mechanical properties of the films coated with PU/NC coatings were significantly improved. With the increase of NC M_η, the strength and thermal stability of the coated films increased, but the pliability, water resistivity, and optical transmission decreased slowly. The PU/NC coating with low NC M_η more readily penetrated into the RC film, and reacted with cellulose, resulting in a strong interfacial bonding and dense surface caused by intimate blend of PU/NC in the coated films. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1623–1631, 1999     

Characterisation of Hyaluronic Acid Blends Modified by Poly(N-Vinylpyrrolidone)

The viscosity behaviour and physical properties of blends containing hyaluronic acid (HA) and poly(N-vinylpyrrolidone) (PVP) were studied by the viscometric technique, steady shear tests, tensile tests and infrared spectroscopy. Viscometric and rheological measurements were carried out using blends of HA/PVP with different HA weight fractions (0, 0.2, 0.5, 0.8 and 1). The polymer films and HA/PVP blend films were prepared using the solution casting method. The study of HA blends by viscometry showed that HA/PVP was miscible with the exception of the blend with high HA content. HA and its blends showed a shear-thinning flow behaviour. The non-Newtonian indices (n) of HA/PVP blends were calculated by the Ostwald–de Waele equation, indicating a shear-thinning effect in which pseudoplasticity increased with increasing HA contents. Mechanical properties, such as tensile strength and elongation at the break, were higher for HA/PVP films with w_HA = 0.5 compared to those with higher HA contents. The elongation at the break of HA/PVP blend films displayed a pronounced increase compared to HA films. Moreover, infrared analysis confirmed the existence of interactions between HA and PVP. The blending of HA with PVP generated films with elasticity and better properties than homopolymer films.     

Plasma-induced grafting of polydimethylsiloxane onto polyurethane surface: Characterization and in vitro assay

Plasma-induced grafting of polydimethylsiloxane (PDMS) onto the surface of polyurethane (PU) film. The virgin, plasma treated, and PDMS grafted PU films were characterized by means of attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, water drop contact angle measurements, and scanning electron microscopy (SEM). The ATR-FTIR spectrogram of the grafted film showed the new characteristic peaks of PDMS. These grafted surfaces exhibited higher hydrophobicity and homogenous morphology. In vitro cell culture study showed that modified surfaces as well as virgin film were compatible with fibroblast cells. The formation of graft polymers combines the biostability of silicone with excellent physical and mechanical properties of PU.     

Development of hydrophobic polyurethane film from structurally modified castor oil and its anticorrosive performance

Hydrophobic polyurethane (PU) films are widely used for various commercial and industrial applications due to their excellent water repelling and self-cleaning property. Nevertheless, achieving appreciable hydrophobicity in PU film is quite a challenge. Herein, we report on the development of a novel hydrophobic PU (fluorinated polyurethane [FCO-PU]) film and comprehensively evaluate its anticorrosive property. The FCO-PU was prepared by structural modification of castor oil (CO) through attachment of long fluorocarbon chains as pendant groups onto the backbone of CO. A model PU film (CO-PU) was also prepared from unmodified CO to compare the properties of FCO-PU film. All intermediate compounds, FCO-PU and CO-PU films were characterized by various spectroscopic techniques. Morphological, thermal and mechanical properties of the PU films were analyzed by field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) studies. Successful introduction of long fluorocarbon chains into the FCO-PU film is reflected by its high hydrophobicity with a water contact angle of 119.1°, compared to the model CO-PU film with a water contact angle of 84.4°. Anticorrosive properties of the PU films were evaluated by polarization technique and electrochemical impedance spectroscopy under corrosive environment and the obtained results reveal a significant corrosion resistance (corrosion rate: 6.72 × 10⁻⁶ mm/year) behavior by the FCO-PU film. This work represents an effective strategy for the backbone modification of CO to develop novel functional PU materials.     

PREPARATION AND PHYSICAL PROPERTIES OF BLEND FILMS FROM SODIUM ALGINATE AND POLYACRYLAMIDE SOLUTIONS

Blend films of sodium alginate and polyacrylamide (PAAm) were prepared by mixing the aqueous solution of both samples at a different ratio. All blend films obtained are optically clear to the naked eye. The structure and physical properties of the films were studied by FT-infrared (FT-IR), wide angle X-ray diffraction (WAXD), differential thermal analysis (DTA), thermogravimetic analysis (TGA), scanning electron microscopy (SEM), and tensile strength test. The results showed that the occurrence of interactions between -COO^?, -OH groups of sodium alginate and -CONH₂ groups of PAAm in the blends through hydrogen formation. The blend films exhibited the higher thermal stability and improved mechanical properties in dry states. These properties had the maximum value around 20 wt% PAAm content in the blend film. The morphological transition of the blend films from sodium alginate-like to PAAm-like was observed by scanning electron microscopy.     

Synthesis, porous structure, and underwater acoustic properties of macroporous cross-linked copolymer beads

The macroporous and elastomeric beads from polyurethane acrylate (PUA), ethyl methacrylate (EMA), and styrene (St) are prepared by suspension polymerization using n-heptane as porogen and 1,2-divinylbenzene (DVB) as cross-linking agent. The scanning electronic microscope results show that the beads of PUA–EMA–St cross-linked copolymers have many large pores on their surfaces and interiors, and the macroporous sizes are dependent of the copolymer composition and the dosages of cross-linking agents and porogen. Average porous diameters decrease as the dosages of DVB increase and the contents of PUA and porogen decrease. The cross-linked copolymers have two kinds of beads (one with many larger holes on the surface and another with much smaller pores or without pore), when the ratio of PUA to EMA and St is from 6/4 to 4/6. The macroporous and elastomeric beads can improve the underwater acoustic absorption properties of the polyurethane/epoxy (PU/EP) blend elastomer, and the underwater acoustic properties of the composites based on PU/EP blend elastomer and the beads depend mainly on the amounts of the beads and the dosages of porogen.     

Preparation, structure and properties of porous polyimide films via PAA/PU alloy

A new route to porous polyimide (PI) films with pore sizes in the nanometer regime was developed. A polyamic acid (PAA)/polyurethane (PU) blend with PU as the disperse phase was first prepared via in situ polymerization of pyromellitic dianhydride and 4,4-oxydianiline in PU solutions. Porous PI films were obtained from PAA/PU films by thermolysis of PU at 360°C and imidization of PAA at 300°C, respectively. Fourier transform infrared spectroscopy and thermal gravimetric analysis were used to detect the imidization and thermolysis processes of PAA/PU blends under thermal treatment. The microporous structure of the PI films was observed by transmission electron microscopy. It was found that the size and content of pores increased with an increase in the PU mass fraction in the PAA/PU blend up to 20%. Because of the existence of nanopores, the dielectric constant of PI films decreased by a wide margin and was less than 2.0 at a PU mass fraction of 20%. It implies that this is an effective means to reduce the dielectric constant of PI, but it also causes the decrease of tensile strength and the rise of water absorption. Translated from Chemistry Journal of Chinese Universities 2006, 27(1): (in Chinese)     

Mechanical properties of rigid polyurethane composites reinforced with surface treated ultrahigh molecular weight polyethylene fibers

The mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE) fibers reinforced rigid polyurethane (PU) composites were studied, and the effects of the fiber surface treatment and the mass fraction were discussed. Chromic acid was used to treat the UHMWPE fibers, and polyurethane composites were prepared with 0.1 to 0.6 wt% as‐received and treated UHMWPE fibers. Attenuated total reflection Fourier transform infrared demonstrated that oxygen‐containing functional groups were efficiently grafted to the fiber surface. The mechanical performance tests of the UHMWPE fibers/PU composites were conducted, and the results revealed that the treated UHMWPE fibers/PU composites had better tensile, compression, and bending properties than as‐received UHMWPE fibers/PU composites. Thermal gravimetric analyzer showed that the thermal stability of the treated fiber composites were improved. The interface bonding of PU composites were investigated by scanning electron microscopy and dynamic mechanical analysis, and the results indicated that the surface modification of UHMWPE fiber could improve the interaction between fiber and PU, which played a positive role in mechanical properties of composites.     

Degradation behavior of poly (l-lactide-co-glycolide) films through gamma-ray irradiation

Gamma-ray irradiation is a very useful tool to improve the physicochemical properties of various biodegradable polymers without the use of a heating and crosslinking agent. The purpose of this study was to investigate the degradation behavior of poly (l-lactide-co-glycolide) (PLGA) depending on the applied gamma-ray irradiation doses. PLGA films prepared through a solvent casting method were irradiated with gamma radiation at various irradiation doses. The irradiation was performed using 60Co gamma-ray doses of 25–500 kGy at a dose rate of 10 kGy/h.The degradation of irradiated films was observed through the main chain scission. Exposure to gamma radiation dropped the average molecular weight (M_n and M_w), and weakened the mechanical strength. Thermograms of irradiated film show various changes of thermal properties in accordance with gamma-ray irradiation doses. Gamma-ray irradiation changes the morphology of the surface, and improves the wettability. In conclusion, gamma-ray irradiation will be a useful tool to control the rate of hydrolytic degradation of these PLGA films.     

壳聚糖-聚羟基丁酸酯共混膜的制备与性质

以乙酸为共溶剂,制备了壳聚糖-聚羟基丁酸酯(CTS-PHB)共混膜,利用红外光谱(FT-IR)、广角X粉末衍射(WAXD)、扫描电镜(SEM)及差热分析(DTA)表征了共混膜的化学组成、晶形、形貌和热稳定性能。研究表明:CTS和PHB可在体积百分数为62.5%的乙酸溶液中共混,形成表面光滑、不透明的膜,干态共混膜具备一定的力学强度。各比例的CTS-PHB共混膜有相同的热分解温度,共混膜的形貌特征随两组分质量配比变化,其中mPHB/mCTS=1/1的共混膜显示出良好的有序结构。     

PMMA/PVDF共混对PVDF的β相构型影响的研究

采用溶液法制备了不同含量的聚甲基丙烯酸甲酯/聚偏二氟乙烯(PMMA/PVDF)共混薄膜,利用傅立叶变换红外光谱(FTIR)、X射线衍射谱(XRD)、和差热分析法(DSC)对共混薄膜的结晶行为进行了分析。结果表明,共混物中PMMA的含量对PVDF的β相构型有明显影响:PMMA/PVDF=30/70共混物中β相含量最高。为提高PVDF薄膜的铁电性能提供了新的研究方法。     

Synthesis and properties of room temperature curable trimethoxysilane‐terminated polyurethane and their dispersions

The purpose of this research is to study the synthesis and characterization of stable aqueous dispersions of externally chain extended polyurethane/urea compositions terminated by hydrolyzable or hydrolyzed trialkoxysilane groups incorporated through secondary amino groups. These dispersions with excellent storage stability are substantially free from organic solvents which cure to water and solvent resistant, tough, scratch resistant, preferably light stable (non‐yellowing) silylated polyurethane (SPU) films. The films were characterized by FT‐IR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), tensile strength and water contact angle measurements, nanoindentation, gel content, water and xylene swellability tests. The properties of the films were discussed and correlated in detail by changing length of soft segment, diisocyanates, NCO/OH ratio and chain extender, ethylenediamine (EDA). From the results, it was found that the particle size and viscosity are lower whereas the gel content and thermal stability are higher for SPUs. Modulus, hardness and tensile properties of SPU films are superior compared to EDA‐PU film. Higher water contact angle and residual weight percentage of SPU films confirm silylation of PU by [3‐(phenylamino)propyl]trimethoxysilane (PAPTMS). Increase in NCO/OH ratios consumes more quantity of PAPTMS which makes PU with superior mechanical properties. Higher PAPTMS content in SPU results in effective crosslinking of the functional silanol groups formed by hydrolysis reaction of trimethoxysilane groups. Overall, SPUs synthesized at 1.4 NCO/OH ratio using Poly‐(oxytetramethylene)glycol (PTMG)‐2000 and isophorone diisocyanate (or) toluene‐2,4‐diisocyanate have excellent properties compared to SPUs prepared using PTMG‐1000 and at 1.2 and 1.6 NCO/OH ratios. SPUs prepared at 1.6 NCO/OH ratio are brittle due to higher crosslinking density. In addition, the crosslinking density of the films can be modified through silane end‐group modification to produce SPUs with a wide range of physical properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Natural and acid-treated attapulgite reinforced soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks

Soybean oil-based polyurethane (PU)/epoxy (EP) interpenetrating polymer network (IPN) nanocomposites were prepared with natural attapulgite (N-ATT) and acid-treated attapulgite (A-ATT). The structure, glass transition, damping properties, thermal stability, mechanical properties and morphology of PU/EP IPN/ATT nanocomposites were characterized by X-ray diffraction (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyzer, universal test machine and scanning electronic microscope (SEM). XRD showed that interaction with PU did not change the crystal structures of ATT. DMA results revealed the addition of ATT improved the glass transition temperature of the soybean oil-based PU/EP IPN, especially for A-ATT. However, the incorporation of ATT slightly decreased the damping properties of the soybean oil-based PU/EP IPN. Tensile tests confirmed that A-ATT had a significant reinforcement effect on the soybean oil-based PU/EP IPN. The tensile strength of the soybean oil-based PU/EP IPN increased by 56% with the addition of 4 mass% A-ATT. SEM demonstrated the relatively uniform dispersion of both N-ATT and A-ATT in the soybean oil-based PU/EP IPN matrix.