<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

An efficient synthesis of <Emphasis Type="Italic">β</Emphasis>-methoxycarbonyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactones

β-Methoxycarbonyl-γ-butyrolactones bearing a γ-aromatic substituent were prepared via copper-catalyzed reductive aldol addition/lactonization domino reactions of ketones with α,β-unsaturated dicarboxylate esters and a silane under ambient temperature. The reaction has advantage of using readily available reagents, mild conditions and high efficiency.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Spectroscopic and electrical characterization of <Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">γ</Emphasis>-bisdiphenylene-<Emphasis Type="Italic">β</Emphasis>-phenylallyl radical as an organic semiconductor

The semiconductor properties of the earliest known stable radical, α,γ-bisdiphenylene-β-phenylallyl radical (Koelsch radical, 1^?) were assessed using spectroscopic and electrical techniques. This radical undergoes reversible redox processes, and it has low redox potentials. In addition, 1^? possesses long wavelength absorption bands, owing to the existence of a singly-occupied molecular orbital whose energy level lies between those of the HOMO and LUMO. A spin-coated thin-film of 1^? displays photocurrent and an electron mobility of 6.3 × 10^?7 cm² V^?1 s^?1 on a trially-fabricated organic field effect transistor.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

Expression of a Glucose-tolerant β-glucosidase from <Emphasis Type="Italic">Humicola grisea</Emphasis> var. <Emphasis Type="Italic">thermoidea</Emphasis> in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A β-glucosidase gene (bgl4) from Humicola grisea var thermoidea was successfully expressed in Saccharomyces cerevisiae. The recombinant protein (BGL4 ^Sc ) was initially detected associated with yeast cells and later in the culture medium. BGL4 ^Sc showed optimal pH and temperature of 6.0 and 40 °C, respectively, and an apparent molecular mass of 57 kDa. The enzyme showed activity against cellobiose and synthetic substrates, and was inhibited more than 80% by Fe²⁺, Cu²⁺, Zn²⁺, and Al³⁺. Using p-nitrophenyl-β-d-glucopyranoside (pNPG) as substrate, BGL4 ^Sc presented a V _max of 6.72 μmol min⁻¹ mg total protein⁻¹ and a K _m of 0.16 mM under optimal conditions. Most important, BGL4 ^Sc is resistant to inhibition by glucose and the calculated K _i value for this sugar is 70 mM. This feature prompts BLG4 ^Sc as an ideal enzyme to be used in the saccharification process of lignocellulosic materials for ethanol production.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

Alkyl <Emphasis Type="Italic">β</Emphasis>-<Emphasis Type="SmallCaps">d</Emphasis>-cellulosides: non-reducing cellulose mimics

Non-reducing cellulose mimics, termed alkyl β-d-cellulosides, were successfully prepared by two efficient multi-step syntheses starting from commercially available microcrystalline cellulose or cellulose triacetate. Introduction of the alkoxy moiety and degradation of the cellulose backbone was carried out in the presence of a Lewis acid, on one hand. On the other hand, cellulose hydrolysis mediated by mineral acids was combined with β-glycosidation performed in the presence of silver salts. The samples obtained possess a number-average degree of polymerization from 5 to 25, determined by size-exclusion chromatography, elemental analyses, NMR spectroscopy, and MALDI-TOF mass spectrometry. Samples in multi-gram quantities were available. Selective formation of a β-glycosidic bond between the C-1 atom of the reducing end group and alkoxy moieties was confirmed by a combination of 2D NMR spectroscopic and MALDI-TOF MS techniques. Due to the blocking of the aldehyde function, the cellulosides described are very useful mimics for the investigation of polysaccharide interactions with other complex molecules such as proteins or to determine polymer properties in solution or in solid state.